This change ports in Marco Krahl's STM32F4 framebuffer overlays for the LTDC and DMA2D into the STM32F7. That driver was same as the STM32F4 driver. I am unable to verify the update because I do not have the STM32F76x hardware. So this commit very likely breaks the LTDC/DMA2D. However, it was probably not left in a functional state anyway so I do not think that there is any loss.
Squashed commit of the following:
arch/arm/src/stm32f7: Some minor changes for clean compilation of LTDC.
arch/arm/src/stm32f7: Add overly support for LTDC driver header file.
arch/arm/src/stm32f7: Add overly support for LTDC driver file.
arch/arm/src/stm32f7: Add overly support for DMA2D driver header file.
arch/arm/src/stm32f7: Finishes overly support for DMA2D driver.
arch/arm/src/stm32f7: Partial overly support in DMA2D driver (a lot more to be donw)
arch/arm/src/stm32f7/chip: Clone overlay DMA2D register definitions from F4
arch/arm/src/stm32f7: Clone overlay configuration from stm32 F4
This commit is contained in:
Gregory Nutt
parent
5b899b76c4
commit
6dcce0430c
@ -8176,8 +8176,8 @@ config STM32_LTDC_FB_BASE
|
||||
config STM32_LTDC_FB_SIZE
|
||||
int "Framebuffer memory size (bytes)"
|
||||
default 0
|
||||
---help---
|
||||
Must be the whole size of the active LTDC layer.
|
||||
---help---
|
||||
Must be the whole size of the active LTDC layer.
|
||||
|
||||
config STM32_LTDC_L1_CHROMAKEYEN
|
||||
bool "Enable chromakey support for layer 1"
|
||||
|
||||
@ -49,22 +49,6 @@
|
||||
#include <nuttx/video/fb.h>
|
||||
#include <nuttx/nx/nxglib.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Inline Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
@ -1317,6 +1317,8 @@ config STM32F7_DSIHOST
|
||||
config STM32F7_DMA2D
|
||||
bool "DMA2D"
|
||||
default n
|
||||
select FB
|
||||
select FB_OVERLAY
|
||||
depends on STM32F7_HAVE_DMA2D
|
||||
---help---
|
||||
The STM32 DMA2D is an Chrom-Art Accelerator for image manipulation
|
||||
@ -1379,6 +1381,7 @@ config STM32F7_LPTIM1
|
||||
config STM32F7_LTDC
|
||||
bool "LTDC"
|
||||
default n
|
||||
select FB
|
||||
depends on STM32F7_HAVE_LTDC
|
||||
---help---
|
||||
The STM32 LTDC is an LCD-TFT Display Controller available on
|
||||
@ -4881,12 +4884,6 @@ if STM32F7_LTDC
|
||||
|
||||
menu "LTDC Configuration"
|
||||
|
||||
config STM32F7_LTDC_INTERFACE
|
||||
bool "LTDC interface support"
|
||||
default n
|
||||
---help---
|
||||
Enable the ltdc interface to support ltdc layer control.
|
||||
|
||||
config STM32F7_LTDC_USE_DSI
|
||||
bool "Use DSI as display connection"
|
||||
default n
|
||||
@ -4942,6 +4939,7 @@ config STM32F7_LTDC_DITHER_BLUE
|
||||
|
||||
config STM32F7_LTDC_FB_BASE
|
||||
hex "Framebuffer memory start address"
|
||||
default 0
|
||||
---help---
|
||||
If you are using the LTDC, then you must provide the address
|
||||
of the start of the framebuffer. This address will typically
|
||||
@ -4950,6 +4948,20 @@ config STM32F7_LTDC_FB_BASE
|
||||
config STM32F7_LTDC_FB_SIZE
|
||||
int "Framebuffer memory size (bytes)"
|
||||
default 0
|
||||
---help---
|
||||
Must be the whole size of the active LTDC layer.
|
||||
|
||||
config STM32F7_LTDC_L1_CHROMAKEYEN
|
||||
bool "Enable chromakey support for layer 1"
|
||||
default y
|
||||
|
||||
config STM32F7_LTDC_L1_CHROMAKEY
|
||||
hex "Layer L1 initial chroma key"
|
||||
default 0x00000000
|
||||
|
||||
config STM32F7_LTDC_L1_COLOR
|
||||
hex "Layer L1 default color"
|
||||
default 0x00000000
|
||||
|
||||
choice
|
||||
prompt "Layer 1 color format"
|
||||
@ -4957,27 +4969,35 @@ choice
|
||||
|
||||
config STM32F7_LTDC_L1_L8
|
||||
bool "8 bpp L8 (8-bit CLUT)"
|
||||
depends on FB_CMAP
|
||||
|
||||
config STM32F7_LTDC_L1_AL44
|
||||
bool "8 bpp AL44 (4-bit alpha + 4-bit CLUT)"
|
||||
depends on FB_CMAP
|
||||
|
||||
config STM32F7_LTDC_L1_AL88
|
||||
bool "16 bpp AL88 (8-bit alpha + 8-bit CLUT)"
|
||||
depends on FB_CMAP
|
||||
|
||||
config STM32F7_LTDC_L1_RGB565
|
||||
bool "16 bpp RGB 565"
|
||||
depends on !FB_CMAP
|
||||
|
||||
config STM32F7_LTDC_L1_ARGB4444
|
||||
bool "16 bpp ARGB 4444"
|
||||
depends on !FB_CMAP
|
||||
|
||||
config STM32F7_LTDC_L1_ARGB1555
|
||||
bool "16 bpp ARGB 1555"
|
||||
depends on !FB_CMAP
|
||||
|
||||
config STM32F7_LTDC_L1_RGB888
|
||||
bool "24 bpp RGB 888"
|
||||
depends on !FB_CMAP
|
||||
|
||||
config STM32F7_LTDC_L1_ARGB8888
|
||||
bool "32 bpp ARGB 8888"
|
||||
depends on !FB_CMAP
|
||||
|
||||
endchoice # Layer 1 color format
|
||||
|
||||
@ -4987,40 +5007,58 @@ config STM32F7_LTDC_L2
|
||||
|
||||
if STM32F7_LTDC_L2
|
||||
|
||||
config STM32F7_LTDC_L2_COLOR
|
||||
hex "Layer L2 default color"
|
||||
default 0x00000000
|
||||
|
||||
config STM32F7_LTDC_L2_CHROMAKEYEN
|
||||
bool "Enable chromakey support for layer 2"
|
||||
default y
|
||||
|
||||
config STM32F7_LTDC_L2_CHROMAKEY
|
||||
hex "Layer L2 initial chroma key"
|
||||
default 0x00000000
|
||||
|
||||
choice
|
||||
prompt "Layer 2 (top layer) color format"
|
||||
default STM32F7_LTDC_L2_RGB565
|
||||
|
||||
config STM32F7_LTDC_L2_L8
|
||||
depends on STM32F7_LTDC_L1_L8
|
||||
bool "8 bpp L8 (8-bit CLUT)"
|
||||
|
||||
config STM32F7_LTDC_L2_AL44
|
||||
depends on STM32F7_LTDC_L1_AL44
|
||||
bool "8 bpp AL44 (4-bit alpha + 4-bit CLUT)"
|
||||
|
||||
config STM32F7_LTDC_L2_AL88
|
||||
depends on STM32F7_LTDC_L1_AL88
|
||||
bool "16 bpp AL88 (8-bit alpha + 8-bit CLUT)"
|
||||
|
||||
config STM32F7_LTDC_L2_RGB565
|
||||
depends on STM32F7_LTDC_L1_RGB565
|
||||
bool "16 bpp RGB 565"
|
||||
|
||||
config STM32F7_LTDC_L2_ARGB4444
|
||||
depends on STM32F7_LTDC_L1_ARGB4444
|
||||
bool "16 bpp ARGB 4444"
|
||||
|
||||
config STM32F7_LTDC_L2_ARGB1555
|
||||
depends on STM32F7_LTDC_L1_ARGB1555
|
||||
bool "16 bpp ARGB 1555"
|
||||
|
||||
config STM32F7_LTDC_L2_RGB888
|
||||
depends on STM32F7_LTDC_L1_RGB888
|
||||
bool "24 bpp RGB 888"
|
||||
|
||||
config STM32F7_LTDC_L2_ARGB8888
|
||||
depends on STM32F7_LTDC_L1_ARGB8888
|
||||
bool "32 bpp ARGB 8888"
|
||||
|
||||
endchoice # Layer 2 color format
|
||||
|
||||
endif # STM32F7_LTDC_L2
|
||||
|
||||
if STM32F7_LTDC_L1_L8 || STM32F7_LTDC_L2_L8
|
||||
|
||||
config FB_CMAP
|
||||
bool "Enable color map support"
|
||||
default y
|
||||
@ -5030,12 +5068,11 @@ config FB_CMAP
|
||||
config FB_TRANSPARENCY
|
||||
bool "Enable transparency color map support"
|
||||
default y
|
||||
depends on FB_CMAP
|
||||
---help---
|
||||
Enabling transparency color map support is neccessary for
|
||||
ltdc L8 format.
|
||||
|
||||
endif
|
||||
|
||||
config STM32F7_LTDC_REGDEBUG
|
||||
bool "Enable LTDC register value debug messages"
|
||||
default n
|
||||
@ -5053,49 +5090,93 @@ if STM32F7_DMA2D
|
||||
menu "DMA2D Configuration"
|
||||
|
||||
config STM32F7_DMA2D_NLAYERS
|
||||
int "Number DMA2D layers"
|
||||
default 2
|
||||
int "Number DMA2D overlays"
|
||||
default 1
|
||||
range 1 256
|
||||
---help---
|
||||
Number of allocatable DMA2D layers except the LTDC layer.
|
||||
Number of supported DMA2D layer.
|
||||
|
||||
config STM32F7_DMA2D_LAYER_SHARED
|
||||
bool "Overlays shared memory region"
|
||||
default n
|
||||
---help---
|
||||
Several overlays can share the same memory region.
|
||||
Setup a whole memory area (usually multiple size of the visible screen)
|
||||
allows image preprocessing before they become visible by blit operation.
|
||||
|
||||
config STM32F7_DMA2D_LAYER_PPLINE
|
||||
int "Pixel per line"
|
||||
default 1
|
||||
range 1 65535
|
||||
---help---
|
||||
If you are using the DMA2D, then you must provide the pixel per line or
|
||||
width of the overlay.
|
||||
|
||||
config STM32F7_DMA2D_FB_BASE
|
||||
hex "Framebuffer memory start address"
|
||||
default 0
|
||||
---help---
|
||||
If you are using the DMA2D, then you must provide the address
|
||||
of the start of the DMA2D overlays framebuffer. This address will typically
|
||||
be in the SRAM or SDRAM memory region of the FSMC.
|
||||
|
||||
config STM32F7_DMA2D_FB_SIZE
|
||||
int "Framebuffer memory size (bytes)"
|
||||
default 0
|
||||
---help---
|
||||
Must be the whole size of all DMA2D overlays.
|
||||
|
||||
menu "Supported pixel format"
|
||||
|
||||
config STM32F7_DMA2D_L8
|
||||
depends on FB_CMAP
|
||||
depends on FB_CMAP && STM32F7_LTDC_L1_L8
|
||||
bool "8 bpp L8 (8-bit CLUT)"
|
||||
default y
|
||||
|
||||
config STM32F7_DMA2D_AL44
|
||||
depends on FB_CMAP
|
||||
depends on FB_CMAP && STM32F7_LTDC_L1_AL44
|
||||
bool "8 bpp AL44 (4-bit alpha + 4-bit CLUT)"
|
||||
default n
|
||||
default y
|
||||
|
||||
config STM32F7_DMA2D_AL88
|
||||
depends on FB_CMAP
|
||||
depends on FB_CMAP && STM32F7_LTDC_L1_AL88
|
||||
bool "16 bpp AL88 (8-bit alpha + 8-bit CLUT)"
|
||||
default n
|
||||
default y
|
||||
|
||||
config STM32F7_DMA2D_RGB565
|
||||
bool "16 bpp RGB 565"
|
||||
depends on STM32F7_LTDC_L1_RGB565
|
||||
default y
|
||||
|
||||
config STM32F7_DMA2D_ARGB4444
|
||||
bool "16 bpp ARGB 4444"
|
||||
default n
|
||||
depends on STM32F7_LTDC_L1_ARGB4444
|
||||
default y
|
||||
|
||||
config STM32F7_DMA2D_ARGB1555
|
||||
bool "16 bpp ARGB 1555"
|
||||
default n
|
||||
depends on STM32F7_LTDC_L1_ARGB15555
|
||||
default y
|
||||
|
||||
config STM32F7_DMA2D_RGB888
|
||||
bool "24 bpp RGB 888"
|
||||
depends on STM32F7_LTDC_L1_RGB888
|
||||
default y
|
||||
|
||||
config STM32F7_DMA2D_ARGB8888
|
||||
bool "32 bpp ARGB 8888"
|
||||
default n
|
||||
depends on STM32F7_LTDC_L1_ARGB8888
|
||||
default y
|
||||
|
||||
endmenu
|
||||
|
||||
config STM32F7_DMA2D_REGDEBUG
|
||||
bool "DMA2D Register level debug"
|
||||
depends on DEBUG_INFO && DEBUG_LCD
|
||||
default n
|
||||
---help---
|
||||
Output detailed register-level DMA2D device debug information.
|
||||
|
||||
endmenu
|
||||
endif # STM32F7_DMA2D
|
||||
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/****************************************************************************
|
||||
* arch/arm/src/stm32/chip/stm32_dma2d.h
|
||||
* arch/arm/src/stm32f7/chip/stm32_dma2d.h
|
||||
*
|
||||
* Copyright (C) 2014-2015 Marco Krahl. All rights reserved.
|
||||
* Author: Marco Krahl <ocram.lhark@gmail.com>
|
||||
@ -33,8 +33,8 @@
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_STM32_CHIP_STM32_DMA2D_H
|
||||
#define __ARCH_ARM_SRC_STM32_CHIP_STM32_DMA2D_H
|
||||
#ifndef __ARCH_ARM_SRC_STM32F7_CHIP_STM32_DMA2D_H
|
||||
#define __ARCH_ARM_SRC_STM32F7_CHIP_STM32_DMA2D_H
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
@ -70,29 +70,29 @@
|
||||
#define STM32_DMA2D_OOR_OFFSET 0x0040 /* DMA2D Output Offset Register */
|
||||
#define STM32_DMA2D_NLR_OFFSET 0x0044 /* DMA2D Number Of Line Register */
|
||||
#define STM32_DMA2D_LWR_OFFSET 0x0048 /* DMA2D Line Watermark Register */
|
||||
#define STM32_DMA2D_AMTCR_OFFSET 0x004C /* DMA2D AHB Master Time Configuration Register */
|
||||
#define STM32_DMA2D_AMTCR_OFFSET 0x004c /* DMA2D AHB Master Time Configuration Register */
|
||||
|
||||
/* DMA2D Register Addresses **************************************************/
|
||||
|
||||
#define STM32_DMA2D_CR (STM32_DMA2D_BASE+STM32_DMA2D_CR_OFFSET)
|
||||
#define STM32_DMA2D_ISR (STM32_DMA2D_BASE+STM32_DMA2D_ISR_OFFSET)
|
||||
#define STM32_DMA2D_IFCR (STM32_DMA2D_BASE+STM32_DMA2D_IFCR_OFFSET)
|
||||
#define STM32_DMA2D_FGMAR (STM32_DMA2D_BASE+STM32_DMA2D_FGMAR_OFFSET)
|
||||
#define STM32_DMA2D_FGOR (STM32_DMA2D_BASE+STM32_DMA2D_FGOR_OFFSET)
|
||||
#define STM32_DMA2D_BGMAR (STM32_DMA2D_BASE+STM32_DMA2D_BGMAR_OFFSET)
|
||||
#define STM32_DMA2D_BGOR (STM32_DMA2D_BASE+STM32_DMA2D_BGOR_OFFSET)
|
||||
#define STM32_DMA2D_FGPFCCR (STM32_DMA2D_BASE+STM32_DMA2D_FGPFCCR_OFFSET)
|
||||
#define STM32_DMA2D_FGCOLR (STM32_DMA2D_BASE+STM32_DMA2D_FGCOLR_OFFSET)
|
||||
#define STM32_DMA2D_BGPFCCR (STM32_DMA2D_BASE+STM32_DMA2D_BGPFCCR_OFFSET)
|
||||
#define STM32_DMA2D_BGCOLR (STM32_DMA2D_BASE+STM32_DMA2D_BGCOLR_OFFSET)
|
||||
#define STM32_DMA2D_FGCMAR (STM32_DMA2D_BASE+STM32_DMA2D_FGCMAR_OFFSET)
|
||||
#define STM32_DMA2D_BGCMAR (STM32_DMA2D_BASE+STM32_DMA2D_BGCMAR_OFFSET)
|
||||
#define STM32_DMA2D_OPFCCR (STM32_DMA2D_BASE+STM32_DMA2D_OPFCCR_OFFSET)
|
||||
#define STM32_DMA2D_OCOLR (STM32_DMA2D_BASE+STM32_DMA2D_OCOLR_OFFSET)
|
||||
#define STM32_DMA2D_OMAR (STM32_DMA2D_BASE+STM32_DMA2D_OMAR_OFFSET)
|
||||
#define STM32_DMA2D_OOR (STM32_DMA2D_BASE+STM32_DMA2D_OOR_OFFSET)
|
||||
#define STM32_DMA2D_NLR (STM32_DMA2D_BASE+STM32_DMA2D_NLR_OFFSET)
|
||||
#define STM32_DMA2D_LWR (STM32_DMA2D_BASE+STM32_DMA2D_LWR_OFFSET)
|
||||
#define STM32_DMA2D_CR (STM32_DMA2D_BASE + STM32_DMA2D_CR_OFFSET)
|
||||
#define STM32_DMA2D_ISR (STM32_DMA2D_BASE + STM32_DMA2D_ISR_OFFSET)
|
||||
#define STM32_DMA2D_IFCR (STM32_DMA2D_BASE + STM32_DMA2D_IFCR_OFFSET)
|
||||
#define STM32_DMA2D_FGMAR (STM32_DMA2D_BASE + STM32_DMA2D_FGMAR_OFFSET)
|
||||
#define STM32_DMA2D_FGOR (STM32_DMA2D_BASE + STM32_DMA2D_FGOR_OFFSET)
|
||||
#define STM32_DMA2D_BGMAR (STM32_DMA2D_BASE + STM32_DMA2D_BGMAR_OFFSET)
|
||||
#define STM32_DMA2D_BGOR (STM32_DMA2D_BASE + STM32_DMA2D_BGOR_OFFSET)
|
||||
#define STM32_DMA2D_FGPFCCR (STM32_DMA2D_BASE + STM32_DMA2D_FGPFCCR_OFFSET)
|
||||
#define STM32_DMA2D_FGCOLR (STM32_DMA2D_BASE + STM32_DMA2D_FGCOLR_OFFSET)
|
||||
#define STM32_DMA2D_BGPFCCR (STM32_DMA2D_BASE + STM32_DMA2D_BGPFCCR_OFFSET)
|
||||
#define STM32_DMA2D_BGCOLR (STM32_DMA2D_BASE + STM32_DMA2D_BGCOLR_OFFSET)
|
||||
#define STM32_DMA2D_FGCMAR (STM32_DMA2D_BASE + STM32_DMA2D_FGCMAR_OFFSET)
|
||||
#define STM32_DMA2D_BGCMAR (STM32_DMA2D_BASE + STM32_DMA2D_BGCMAR_OFFSET)
|
||||
#define STM32_DMA2D_OPFCCR (STM32_DMA2D_BASE + STM32_DMA2D_OPFCCR_OFFSET)
|
||||
#define STM32_DMA2D_OCOLR (STM32_DMA2D_BASE + STM32_DMA2D_OCOLR_OFFSET)
|
||||
#define STM32_DMA2D_OMAR (STM32_DMA2D_BASE + STM32_DMA2D_OMAR_OFFSET)
|
||||
#define STM32_DMA2D_OOR (STM32_DMA2D_BASE + STM32_DMA2D_OOR_OFFSET)
|
||||
#define STM32_DMA2D_NLR (STM32_DMA2D_BASE + STM32_DMA2D_NLR_OFFSET)
|
||||
#define STM32_DMA2D_LWR (STM32_DMA2D_BASE + STM32_DMA2D_LWR_OFFSET)
|
||||
|
||||
/* DMA2D Register Bit Definitions ********************************************/
|
||||
|
||||
@ -156,6 +156,12 @@
|
||||
#define DMA2D_xGPFCCR_ALPHA_MASK (0xFF << DMA2D_xGPFCCR_ALPHA_SHIFT)
|
||||
#define DMA2D_xGPFCCR_ALPHA(n) ((uint32_t)(n) << DMA2D_xGPFCCR_ALPHA_SHIFT)
|
||||
|
||||
/* DMA2D PFC alpha mode */
|
||||
|
||||
#define STM32_DMA2D_PFCCR_AM_NONE 0
|
||||
#define STM32_DMA2D_PFCCR_AM_CONST 1
|
||||
#define STM32_DMA2D_PFCCR_AM_PIXEL 2
|
||||
|
||||
/* DMA2D Foreground/Background Color Register */
|
||||
|
||||
#define DMA2D_xGCOLR_BLUE_SHIFT (0) /* Bits 0-7 Blue Value */
|
||||
@ -178,6 +184,20 @@
|
||||
#define DMA2D_OPFCCR_CM_MASK (7 << DMA2D_OPFCCR_CM_SHIFT)
|
||||
#define DMA2D_OPFCCR_CM(n) ((uint32_t)(n) << DMA2D_OPFCCR_CM_SHIFT)
|
||||
|
||||
/* DMA2D PFC Pixel Format */
|
||||
|
||||
#define DMA2D_PF_ARGB8888 0
|
||||
#define DMA2D_PF_RGB888 1
|
||||
#define DMA2D_PF_RGB565 2
|
||||
#define DMA2D_PF_ARGB1555 3
|
||||
#define DMA2D_PF_ARGB14444 4
|
||||
#define DMA2D_PF_L8 5
|
||||
#define DMA2D_PF_AL44 6
|
||||
#define DMA2D_PF_AL88 7
|
||||
#define DMA2D_PF_L4 8
|
||||
#define DMA2D_PF_A8 9
|
||||
#define DMA2D_PF_A4 10
|
||||
|
||||
/* DMA2D Output Color Register */
|
||||
|
||||
#define DMA2D_OCOLR_BLUE_SHIFT (0) /* Bits 0-7 Blue Value */
|
||||
@ -227,4 +247,4 @@
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_STM32_CHIP_STM32_DMA2D_H */
|
||||
#endif /* __ARCH_ARM_SRC_STM32F7_CHIP_STM32_DMA2D_H */
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/************************************************************************************
|
||||
* arch/arm/src/stm32/chip/stm32_ltdc.h
|
||||
* arch/arm/src/stm32f7/chip/stm32_ltdc.h
|
||||
*
|
||||
* Copyright (C) 2013 Ken Pettit. All rights reserved.
|
||||
* Author: Ken Pettit <pettitkd@gmail.com>
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,7 +1,7 @@
|
||||
/****************************************************************************
|
||||
* arch/arm/src/stm32/stm32_dma2d.h
|
||||
* arch/arm/src/stm32f7/stm32_dma2d.h
|
||||
*
|
||||
* Copyright (C) 2014-2015 Marco Krahl. All rights reserved.
|
||||
* Copyright (C) 2014-2015, 2018 Marco Krahl. All rights reserved.
|
||||
* Author: Marco Krahl <ocram.lhark@gmail.com>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -44,374 +44,145 @@
|
||||
#include <nuttx/video/fb.h>
|
||||
#include "stm32_ltdc.h"
|
||||
|
||||
#ifdef CONFIG_STM32F7_DMA2D
|
||||
#ifdef CONFIG_FB_OVERLAY
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
struct ltdc_area_s; /* see arch/arm/src/stm32f7/stm32_ltdc.h */
|
||||
/* This structure describes DMA2D overlay information */
|
||||
|
||||
/* Blend mode definitions */
|
||||
|
||||
enum dma2d_blend_e
|
||||
struct stm32_dma2d_overlay_s
|
||||
{
|
||||
DMA2D_BLEND_NONE = 0, /* Disable all blend operation */
|
||||
DMA2D_BLEND_ALPHA = 0x1, /* Enable alpha blending */
|
||||
DMA2D_BLEND_PIXELALPHA = 0x2, /* Enable alpha blending from pixel color */
|
||||
uint8_t fmt; /* DMA2D pixel format */
|
||||
uint8_t transp_mode; /* DMA2D transparency mode */
|
||||
fb_coord_t xres; /* X-resolution overlay */
|
||||
fb_coord_t yres; /* Y-resolution overlay */
|
||||
FAR struct fb_overlayinfo_s *oinfo; /* Framebuffer overlay information */
|
||||
};
|
||||
|
||||
/* The layer is controlled through the following structure */
|
||||
/* DMA2D is controlled by the following interface */
|
||||
|
||||
struct dma2d_layer_s
|
||||
{
|
||||
/* Name: getvideoinfo
|
||||
*
|
||||
* Description:
|
||||
* Get video information about the layer
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer control structure
|
||||
* vinfo - Reference to the video info structure
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getvideoinfo)(FAR struct dma2d_layer_s *layer,
|
||||
FAR struct fb_videoinfo_s *vinfo);
|
||||
|
||||
/* Name: getplaneinfo
|
||||
*
|
||||
* Description:
|
||||
* Get plane information about the layer
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer control structure
|
||||
* planeno - Number of the plane
|
||||
* pinfo - Reference to the plane info structure
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getplaneinfo)(FAR struct dma2d_layer_s *layer, int planeno,
|
||||
FAR struct fb_planeinfo_s *pinfo);
|
||||
|
||||
/* Name: getlid
|
||||
*
|
||||
* Description:
|
||||
* Get a specific layer identifier.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* lid - Reference to store the layer id
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getlid)(FAR struct dma2d_layer_s *layer, int *lid);
|
||||
|
||||
#ifdef CONFIG_STM32F7_DMA2D_L8
|
||||
/* Name: setclut
|
||||
*
|
||||
* Description:
|
||||
* Configure layer clut (color lookup table).
|
||||
* Non clut is defined during initializing.
|
||||
* Set the cmap table for both foreground and background layer.
|
||||
* Up to 256 colors supported.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* cmap - color lookup table with up the 256 entries
|
||||
* cmap - Reference to the cmap table
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*setclut)(FAR struct dma2d_layer_s *layer,
|
||||
const FAR struct fb_cmap_s *cmap);
|
||||
|
||||
/* Name: getclut
|
||||
*
|
||||
* Description:
|
||||
* Get configured layer clut (color lookup table).
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* cmap - Reference to valid color lookup table accept up the 256 color
|
||||
* entries
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getclut)(FAR struct dma2d_layer_s *layer, FAR struct fb_cmap_s *cmap);
|
||||
#ifdef CONFIG_FB_CMAP
|
||||
int (*setclut)(FAR const struct fb_cmap_s * cmap);
|
||||
#endif
|
||||
|
||||
/* Name: setalpha
|
||||
/* Name: fillcolor
|
||||
*
|
||||
* Description:
|
||||
* Configure layer alpha value factor into blend operation.
|
||||
* During the layer blend operation the source alpha value is multiplied
|
||||
* with this alpha value. If the source color format doesn't support alpha
|
||||
* channel (e.g. non ARGB8888) this alpha value will be used as constant
|
||||
* alpha value for blend operation.
|
||||
* Default value during initializing: 0xff
|
||||
* Fill a specific memory region with a color.
|
||||
* The caller must ensure that the memory region (area) is within the entire
|
||||
* overlay.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* alpha - Alpha value
|
||||
* oinfo - Reference to overlay information
|
||||
* area - Reference to the area to fill
|
||||
* argb - argb8888 color
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*setalpha)(FAR struct dma2d_layer_s *layer, uint8_t alpha);
|
||||
|
||||
/* Name: getalpha
|
||||
*
|
||||
* Description:
|
||||
* Get configured layer alpha value factor for blend operation.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* alpha - Reference to store the alpha value
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getalpha)(FAR struct dma2d_layer_s *layer, uint8_t *alpha);
|
||||
|
||||
/* Name: setblendmode
|
||||
*
|
||||
* Description:
|
||||
* Configure blend mode of the layer.
|
||||
* Default mode during initializing: DMA2D_BLEND_NONE
|
||||
* Blendmode is active after next update.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* mode - Blend mode (see DMA2D_BLEND_*)
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*
|
||||
* Procedure information:
|
||||
* DMA2D_BLEND_NONE:
|
||||
* Informs the driver to disable all blend operation for the given layer.
|
||||
* That means the layer is opaque.
|
||||
*
|
||||
* DMA2D_BLEND_ALPHA:
|
||||
* Informs the driver to enable alpha blending for the given layer.
|
||||
*
|
||||
* DMA2D_BLEND_PIXELALPHA:
|
||||
* Informs the driver to use the pixel alpha value of the layer instead
|
||||
* the constant alpha value. This is only useful for ARGB8888
|
||||
* color format.
|
||||
*/
|
||||
|
||||
int (*setblendmode)(FAR struct dma2d_layer_s *layer, uint32_t mode);
|
||||
|
||||
/* Name: getblendmode
|
||||
*
|
||||
* Description:
|
||||
* Get configured blend mode of the layer.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* mode - Reference to store the blend mode
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getblendmode)(FAR struct dma2d_layer_s *layer, uint32_t *mode);
|
||||
int (*fillcolor)(FAR struct stm32_dma2d_overlay_s *oinfo,
|
||||
FAR const struct fb_area_s *area, uint32_t argb);
|
||||
|
||||
/* Name: blit
|
||||
*
|
||||
* Description:
|
||||
* Copy selected area from a source layer to selected position of the
|
||||
* destination layer.
|
||||
* Copies memory from a source overlay (defined by sarea) to destination
|
||||
* overlay position (defined by destxpos and destypos) without pixelformat
|
||||
* conversion. The caller must ensure that the memory region (area) is
|
||||
* within the entire overlay.
|
||||
*
|
||||
* Parameter:
|
||||
* dest - Reference to the destination layer
|
||||
* destxpos - Selected x target position of the destination layer
|
||||
* destypos - Selected y target position of the destination layer
|
||||
* src - Reference to the source layer
|
||||
* srcarea - Reference to the selected area of the source layer
|
||||
* doverlay - Reference destination overlay
|
||||
* destxpos - x-Offset destination overlay
|
||||
* destypos - y-Offset destination overlay
|
||||
* soverlay - Reference source overlay
|
||||
* sarea - Reference source area
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
* -EINVAL - If one of the parameter invalid or if the size of the
|
||||
* selected source area outside the visible area of the
|
||||
* destination layer. (The visible area usually represents the
|
||||
* display size)
|
||||
* -ECANCELED - Operation cancelled, something goes wrong.
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*blit)(FAR struct dma2d_layer_s *dest,
|
||||
fb_coord_t destxpos, fb_coord_t destypos,
|
||||
FAR const struct dma2d_layer_s *src,
|
||||
FAR const struct ltdc_area_s *srcarea);
|
||||
int (*blit)(FAR struct stm32_dma2d_overlay_s *doverlay,
|
||||
uint32_t destxpos, uint32_t destypos,
|
||||
FAR struct stm32_dma2d_overlay_s *soverlay,
|
||||
FAR const struct fb_area_s *sarea);
|
||||
|
||||
/* Name: blend
|
||||
*
|
||||
* Description:
|
||||
* Blends the selected area from a background layer with selected position
|
||||
* of the foreground layer. Copies the result to the selected position of
|
||||
* the destination layer. Note! The content of the foreground and background
|
||||
* layer keeps unchanged as long destination layer is unequal to the
|
||||
* foreground and background layer.
|
||||
* Blends two source memory areas to a destination memory area with
|
||||
* pixelformat conversion if necessary. The caller must ensure that the
|
||||
* memory region (area) is within the entire overlays.
|
||||
*
|
||||
* Parameter:
|
||||
* dest - Reference to the destination layer
|
||||
* fore - Reference to the foreground layer
|
||||
* forexpos - Selected x target position of the foreground layer
|
||||
* foreypos - Selected y target position of the foreground layer
|
||||
* back - Reference to the background layer
|
||||
* backarea - Reference to the selected area of the background layer
|
||||
* doverlay - Destination overlay
|
||||
* destxpos - x-Offset destination overlay
|
||||
* destypos - y-Offset destination overlay
|
||||
* foverlay - Foreground overlay
|
||||
* forexpos - x-Offset foreground overlay
|
||||
* foreypos - y-Offset foreground overlay
|
||||
* boverlay - Background overlay
|
||||
* barea - x-Offset, y-Offset, x-resolution and y-resolution of
|
||||
* background overlay
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
* -EINVAL - If one of the parameter invalid or if the size of the
|
||||
* selected source area outside the visible area of the
|
||||
* destination layer. (The visible area usually represents the
|
||||
* display size)
|
||||
* -ECANCELED - Operation cancelled, something goes wrong.
|
||||
* On success - OK
|
||||
* On error - -EINVAL or -ECANCELED
|
||||
*/
|
||||
|
||||
int (*blend)(FAR struct dma2d_layer_s *dest,
|
||||
fb_coord_t destxpos, fb_coord_t destypos,
|
||||
FAR const struct dma2d_layer_s *fore,
|
||||
fb_coord_t forexpos, fb_coord_t foreypos,
|
||||
FAR const struct dma2d_layer_s *back,
|
||||
FAR const struct ltdc_area_s *backarea);
|
||||
|
||||
/* Name: fillarea
|
||||
*
|
||||
* Description:
|
||||
* Fill the selected area of the whole layer with a specific color.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* area - Reference to the valid area structure select the area
|
||||
* color - Color to fill the selected area. Color must be formatted
|
||||
* according to the layer pixel format.
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
* -EINVAL - If one of the parameter invalid or if the size of the
|
||||
* selected area outside the visible area of the layer.
|
||||
* -ECANCELED - Operation cancelled, something goes wrong.
|
||||
*/
|
||||
|
||||
int (*fillarea)(FAR struct dma2d_layer_s *layer,
|
||||
FAR const struct ltdc_area_s *area,
|
||||
uint32_t color);
|
||||
int (*blend)(FAR struct stm32_dma2d_overlay_s *doverlay,
|
||||
uint32_t destxpos, uint32_t destypos,
|
||||
FAR struct stm32_dma2d_overlay_s *foverlay,
|
||||
uint32_t forexpos, uint32_t foreypos,
|
||||
FAR struct stm32_dma2d_overlay_s *boverlay,
|
||||
FAR const struct fb_area_s *barea);
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
struct stm32_ltdc_s; /* Forward declaration */
|
||||
|
||||
/****************************************************************************
|
||||
* Name: stm32_dma2dinitltdc
|
||||
* Name: stm32_dma2ddev
|
||||
*
|
||||
* Description:
|
||||
* Get a reference to the dma2d layer coupled with the ltdc layer.
|
||||
* It not intends to use this function by user space applications.
|
||||
* It resolves the following requirements:
|
||||
* 1. Share the color lookup table
|
||||
* 2. Share the planeinfo information
|
||||
* 3. Share the videoinfo information
|
||||
*
|
||||
* Input Parameters:
|
||||
* layer - a valid reference to the low level ltdc layer structure
|
||||
* Get a reference to the DMA2D controller.
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - A valid dma2d layer reference
|
||||
* On success - A valid DMA2D controller reference
|
||||
* On error - NULL and errno is set to
|
||||
* -EINVAL if one of the parameter is invalid
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
FAR struct dma2d_layer_s *stm32_dma2dinitltdc(FAR struct stm32_ltdc_s *layer);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_dma2dgetlayer
|
||||
*
|
||||
* Description:
|
||||
* Get a dma2d layer structure by the layer identifier
|
||||
*
|
||||
* Input Parameters:
|
||||
* lid - Layer identifier
|
||||
*
|
||||
* Returned Value:
|
||||
* Reference to the dma2d layer control structure on success or Null if no
|
||||
* related exist.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
FAR struct dma2d_layer_s *up_dma2dgetlayer(int lid);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_dma2dcreatelayer
|
||||
*
|
||||
* Description:
|
||||
* Create a new dma2d layer object to interact with the dma2d controller
|
||||
*
|
||||
* Input Parameters:
|
||||
* width - Layer width
|
||||
* height - Layer height
|
||||
* fmt - Pixel format of the layer
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - A valid dma2d layer reference
|
||||
* On error - NULL and errno is set to
|
||||
* -EINVAL if one of the parameter is invalid
|
||||
* -ENOMEM if no memory available or exceeds
|
||||
* CONFIG_STM32F7_DMA2D_NLAYERS
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
FAR struct dma2d_layer_s *up_dma2dcreatelayer(fb_coord_t width,
|
||||
fb_coord_t height,
|
||||
uint8_t fmt);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_dma2dremovelayer
|
||||
*
|
||||
* Description:
|
||||
* Remove and deallocate the dma2d layer
|
||||
*
|
||||
* Input Parameters:
|
||||
* layer - Reference to the layer to remove
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int up_dma2dremovelayer(FAR struct dma2d_layer_s *layer);
|
||||
FAR struct dma2d_layer_s *stm32_dma2ddev(void);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_dma2dinitialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize the dma2d controller
|
||||
* Initialize the DMA2D controller
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
@ -419,17 +190,17 @@ int up_dma2dremovelayer(FAR struct dma2d_layer_s *layer);
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int up_dma2dinitialize(void);
|
||||
int stm32_dma2dinitialize(void);
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_dma2duninitialize
|
||||
*
|
||||
* Description:
|
||||
* Uninitialize the dma2d controller
|
||||
* Uninitialize the DMA2D controller
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void up_dma2duninitialize(void);
|
||||
void stm32_dma2duninitialize(void);
|
||||
|
||||
#endif /* CONFIG_STM32F7_DMA2D */
|
||||
#endif /* CONFIG_FB_OVERLAY */
|
||||
#endif /* __ARCH_ARM_SRC_STM32F7_STM32_DMA2D_H */
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,7 +1,7 @@
|
||||
/************************************************************************************
|
||||
* arch/arm/src/stm32/stm32_ltdc.h
|
||||
/****************************************************************************
|
||||
* arch/arm/src/stm32f7/stm32_ltdc.h
|
||||
*
|
||||
* Copyright (C) 2013-2014 Ken Pettit. All rights reserved.
|
||||
* Copyright (C) 2013-2014, 2018 Ken Pettit. All rights reserved.
|
||||
* Authors: Ken Pettit <pettitd@gmail.com>
|
||||
* Marco Krahl <ocram.lhark@gmail.com>
|
||||
*
|
||||
@ -32,14 +32,14 @@
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_STM32F7_STM32_LTDC_H
|
||||
#define __ARCH_ARM_SRC_STM32F7_STM32_LTDC_H
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
@ -49,549 +49,9 @@
|
||||
#include <nuttx/video/fb.h>
|
||||
#include <nuttx/nx/nxglib.h>
|
||||
|
||||
#ifdef CONFIG_STM32F7_LTDC
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
struct dma2d_layer_s; /* see arch/arm/src/stm32f7/stm32_dma2d.h */
|
||||
|
||||
/* Blend mode definitions */
|
||||
|
||||
enum ltdc_blend_e
|
||||
{
|
||||
LTDC_BLEND_NONE = 0, /* Disable all blend operation */
|
||||
LTDC_BLEND_ALPHA = 0x1, /* Enable alpha blending */
|
||||
LTDC_BLEND_PIXELALPHA = 0x2, /* Enable alpha blending from pixel color */
|
||||
LTDC_BLEND_COLORKEY = 0x4, /* Enable colorkey */
|
||||
LTDC_BLEND_ALPHAINV = 0x8, /* Inverse alpha blending of source */
|
||||
LTDC_BLEND_PIXELALPHAINV = 0x10 /* Invers pixel alpha blending of source */
|
||||
};
|
||||
|
||||
/* layer control definitions */
|
||||
|
||||
enum ltdc_layer_e
|
||||
{
|
||||
LTDC_LAYER_OWN = 0, /* The given layer */
|
||||
LTDC_LAYER_TOP = 0x1, /* The initialized top layer */
|
||||
LTDC_LAYER_BOTTOM = 0x2, /* the initialized bottom layer */
|
||||
LTDC_LAYER_ACTIVE = 0x4, /* The current visible flip layer */
|
||||
LTDC_LAYER_INACTIVE = 0x8 /* The current invisible flip layer */
|
||||
#ifdef CONFIG_STM32F7_DMA2D
|
||||
,LTDC_LAYER_DMA2D = 0x10 /* The dma2d interface layer id */
|
||||
#endif
|
||||
};
|
||||
|
||||
/* Update operation flag */
|
||||
|
||||
enum ltdc_update_e
|
||||
{
|
||||
LTDC_UPDATE_NONE = 0, /* Update given layer only */
|
||||
LTDC_UPDATE_SIM = 0x1, /* Update both layer simultaneous */
|
||||
LTDC_UPDATE_FLIP = 0x2, /* Perform flip operation */
|
||||
LTDC_UPDATE_ACTIVATE = 0x4 /* Set the given layer to the active layer */
|
||||
};
|
||||
|
||||
/* sync mode definitions */
|
||||
|
||||
enum ltdc_sync_e
|
||||
{
|
||||
LTDC_SYNC_NONE = 0, /* Immediately */
|
||||
LTDC_SYNC_VBLANK = 0x100, /* Upon vertical sync */
|
||||
LTDC_SYNC_WAIT = 0x200 /* Waits upon vertical sync */
|
||||
};
|
||||
|
||||
/* Definition of the visible layer position and size */
|
||||
|
||||
struct ltdc_area_s
|
||||
{
|
||||
fb_coord_t xpos; /* X position in pixel */
|
||||
fb_coord_t ypos; /* Y position in pixel */
|
||||
fb_coord_t xres; /* X resolution in pixel */
|
||||
fb_coord_t yres; /* Y resolution in pixel */
|
||||
};
|
||||
|
||||
/* The layer is controlled through the following structure */
|
||||
|
||||
struct ltdc_layer_s
|
||||
{
|
||||
/* Name: getvideoinfo
|
||||
*
|
||||
* Description:
|
||||
* Get video information about the layer
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer control structure
|
||||
* vinfo - Reference to the video info structure
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getvideoinfo)(FAR struct ltdc_layer_s *layer,
|
||||
FAR struct fb_videoinfo_s *vinfo);
|
||||
|
||||
/* Name: getplaneinfo
|
||||
*
|
||||
* Description:
|
||||
* Get plane information about the layer
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer control structure
|
||||
* planeno - Number of the plane
|
||||
* pinfo - Reference to the plane info structure
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getplaneinfo)(FAR struct ltdc_layer_s *layer, int planeno,
|
||||
FAR struct fb_planeinfo_s *pinfo);
|
||||
|
||||
/* Name: getlid
|
||||
*
|
||||
* Description:
|
||||
* Get a specific layer identifier.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* lid - Reference to store the layer id
|
||||
* flag - Operation flag describe the layer identifier
|
||||
* e.g. get the current active or inactive layer.
|
||||
* See LTDC_LAYER_* for possible values
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getlid)(FAR struct ltdc_layer_s *layer, int *lid, uint32_t flag);
|
||||
|
||||
#ifdef CONFIG_FB_CMAP
|
||||
/* Name: setclut
|
||||
*
|
||||
* Description:
|
||||
* Configure layer clut (color lookup table).
|
||||
* Non clut is defined during initializing.
|
||||
* Clut is active during next vertical blank period. Do not need an update.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* cmap - color lookup table with up the 256 entries
|
||||
* enable - Enable or disable clut support (if false cmap is ignored and can
|
||||
* be NULL)
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*setclut)(FAR struct ltdc_layer_s *layer,
|
||||
const FAR struct fb_cmap_s *cmap);
|
||||
|
||||
/* Name: getclut
|
||||
*
|
||||
* Description:
|
||||
* Get configured layer clut (color lookup table).
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* cmap - Reference to valid color lookup table accept up the 256 color
|
||||
* entries
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getclut)(FAR struct ltdc_layer_s *layer, FAR struct fb_cmap_s *cmap);
|
||||
#endif
|
||||
|
||||
/* Name: setcolor
|
||||
*
|
||||
* Description:
|
||||
* Configure layer color for the non active layer area.
|
||||
* Default value during initializing: 0x00000000
|
||||
* Color is active after next update.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* argb - ARGB8888 color value
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*setcolor)(FAR struct ltdc_layer_s *layer, uint32_t argb);
|
||||
|
||||
/* Name: getcolor
|
||||
*
|
||||
* Description:
|
||||
* Get configured layer color for the non active layer area.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* argb - Reference to store the ARGB8888 color value
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getcolor)(FAR struct ltdc_layer_s *layer, uint32_t *argb);
|
||||
|
||||
/* Name: setcolorkey
|
||||
*
|
||||
* Description:
|
||||
* Configure the layer color key (chromakey) for transparence.
|
||||
* Default value during initializing: 0x00000000
|
||||
* Colorkey is active after next update.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* rgb - RGB888 color key
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*setcolorkey)(FAR struct ltdc_layer_s *layer, uint32_t rgb);
|
||||
|
||||
/* Name: getcolorkey
|
||||
*
|
||||
* Description:
|
||||
* Get the configured layer color key (chromakey) for transparence.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* rgb - Reference to store the RGB888 color key
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getcolorkey)(FAR struct ltdc_layer_s *layer, uint32_t *rgb);
|
||||
|
||||
/* Name: setalpha
|
||||
*
|
||||
* Description:
|
||||
* Configure layer alpha value factor into blend operation.
|
||||
* During the layer blend operation the source alpha value is multiplied
|
||||
* with this alpha value. If the source color format doesn't support alpha
|
||||
* channel (e.g. non ARGB8888) this alpha value will be used as constant
|
||||
* alpha value for blend operation.
|
||||
* Default value during initializing: 0xff
|
||||
* Alpha is active after next update.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* alpha - Alpha value
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*setalpha)(FAR struct ltdc_layer_s *layer, uint8_t alpha);
|
||||
|
||||
/* Name: getalpha
|
||||
*
|
||||
* Description:
|
||||
* Get configured layer alpha value factor for blend operation.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* alpha - Reference to store the alpha value
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getalpha)(FAR struct ltdc_layer_s *layer, uint8_t *alpha);
|
||||
|
||||
/* Name: setblendmode
|
||||
*
|
||||
* Description:
|
||||
* Configure blend mode of the layer.
|
||||
* Default mode during initializing: LTDC_BLEND_NONE
|
||||
* Blendmode is active after next update.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* mode - Blend mode (see LTDC_BLEND_*)
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*
|
||||
* Procedure information:
|
||||
* LTDC_BLEND_NONE:
|
||||
* Informs the driver to disable all blend operation for the given layer.
|
||||
* That means the layer is opaque. Note this has no effect on the
|
||||
* colorkey settings.
|
||||
*
|
||||
* LTDC_BLEND_ALPHA:
|
||||
* Informs the driver to enable alpha blending for the given layer.
|
||||
*
|
||||
* LTDC_BLEND_COLORKEY:
|
||||
* Informs the driver to enable colorkeying for the given layer.
|
||||
*
|
||||
* LTDC_BLEND_SRCPIXELALPHA:
|
||||
* Informs the driver to use the pixel alpha value of the layer instead
|
||||
* the constant alpha value. This is only useful for ARGB8888
|
||||
* color format.
|
||||
*
|
||||
* LTDC_BLEND_DESTPIXELALPHA:
|
||||
* Informs the driver to use the pixel alpha value of the subjacent layer
|
||||
* instead the constant alpha value. This is only useful for ARGB8888
|
||||
* color format.
|
||||
*/
|
||||
|
||||
int (*setblendmode)(FAR struct ltdc_layer_s *layer, uint32_t mode);
|
||||
|
||||
/* Name: getblendmode
|
||||
*
|
||||
* Description:
|
||||
* Get configured blend mode of the layer.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* mode - Reference to store the blend mode
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getblendmode)(FAR struct ltdc_layer_s *layer, uint32_t *mode);
|
||||
|
||||
/* Name: setarea
|
||||
*
|
||||
* Description:
|
||||
* Configure visible layer area and the reference position of the first
|
||||
* pixel of the whole layer which is the first visible top left pixel in
|
||||
* the active area.
|
||||
* Default value during initializing:
|
||||
* xpos = 0
|
||||
* ypos = 0
|
||||
* xres = display x resolution
|
||||
* yres = display y resolution
|
||||
*
|
||||
* Area is active after next update.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer control structure
|
||||
* area - Reference to the valid area structure for the new active area
|
||||
* srcxpos - x position of the visible pixel of the whole layer
|
||||
* srcypos - y position of the visible pixel of the whole layer
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*
|
||||
* Procedure Information:
|
||||
* If the srcxpos and srcypos unequal the xpos and ypos of the coord
|
||||
* structure this acts like moving the visible area to another position on
|
||||
* the screen during the next update operation.
|
||||
*/
|
||||
|
||||
int (*setarea)(FAR struct ltdc_layer_s *layer,
|
||||
FAR const struct ltdc_area_s *area,
|
||||
fb_coord_t srcxpos,
|
||||
fb_coord_t srcypos);
|
||||
|
||||
/* Name: getarea
|
||||
*
|
||||
* Description:
|
||||
* Get configured visible layer area.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer control structure
|
||||
* area - Reference to the area structure to store the active area
|
||||
* srcxpos - Reference to store the referenced x position of the whole layer
|
||||
* srcypos - Reference to store the reterenced y position of the whole layer
|
||||
*
|
||||
* Returned Value:
|
||||
* On success - OK
|
||||
* On error - -EINVAL
|
||||
*/
|
||||
|
||||
int (*getarea)(FAR struct ltdc_layer_s *layer,
|
||||
FAR struct ltdc_area_s *area,
|
||||
fb_coord_t *srcxpos,
|
||||
fb_coord_t *srcypos);
|
||||
|
||||
/* Name: update
|
||||
*
|
||||
* Description:
|
||||
* Update current layer settings and make changes visible.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* mode - operation mode (see LTDC_UPDATE_*)
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
* -EINVAL - If one of the parameter invalid
|
||||
* -ECANCELED - Operation cancelled, something goes wrong
|
||||
*
|
||||
* Procedure information:
|
||||
* LTDC_UPDATE_SIM:
|
||||
* Informs the driver to update both ltdc layers simultaneously. Otherwise
|
||||
* update the given layer only.
|
||||
*
|
||||
* LTDC_UPDATE_FLIP:
|
||||
* Informs the driver to perform a flip operation.
|
||||
* This only effects the ltdc layer 1 and 2 and can be useful for double
|
||||
* buffering. Each flip operation changed the active layer ot the inactive
|
||||
* and vice versa. In the context of the ltdc that means, the inactive layer
|
||||
* is complete disabled. So the subjacent layer is the background layer
|
||||
* (background color). To reactivate both layer and their settings perform
|
||||
* an update without LTDC_UPDATE_FLIP flag.
|
||||
*
|
||||
* LTDC_UPDATE_ACTIVATE:
|
||||
* Informs the driver that the given layer should be the active layer when
|
||||
* the operation is complete.
|
||||
*
|
||||
* LTDC_SYNC_VBLANK:
|
||||
* Informs the driver to update the layer upon vertical blank. Otherwise
|
||||
* immediately.
|
||||
*/
|
||||
|
||||
int (*update)(FAR struct ltdc_layer_s *layer, uint32_t mode);
|
||||
|
||||
#ifdef CONFIG_STM32F7_DMA2D
|
||||
/* Name: blit
|
||||
*
|
||||
* Description:
|
||||
* Copy selected area from a source layer to selected position of the
|
||||
* destination layer.
|
||||
*
|
||||
* Parameter:
|
||||
* dest - Reference to the destination layer
|
||||
* destxpos - Selected x position of the destination layer
|
||||
* destypos - Selected y position of the destination layer
|
||||
* src - Reference to the source layer
|
||||
* srcarea - Reference to the selected area of the source layer
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
* -EINVAL - If one of the parameter invalid or if the size of the selected
|
||||
* source area outside the visible area of the destination layer.
|
||||
* (The visible area usually represents the display size)
|
||||
*/
|
||||
|
||||
int (*blit)(FAR struct ltdc_layer_s *dest,
|
||||
fb_coord_t destxpos, fb_coord_t destypos,
|
||||
FAR const struct dma2d_layer_s *src,
|
||||
FAR const struct ltdc_area_s *srcarea);
|
||||
|
||||
/* Name: blend
|
||||
*
|
||||
* Description:
|
||||
* Blends the selected area from a foreground layer with selected position
|
||||
* of the background layer. Copy the result to the destination layer. Note!
|
||||
* The content of the foreground and background layer is not changed.
|
||||
*
|
||||
* Parameter:
|
||||
* dest - Reference to the destination layer
|
||||
* destxpos - Selected x position of the destination layer
|
||||
* destypos - Selected y position of the destination layer
|
||||
* fore - Reference to the foreground layer
|
||||
* forexpos - Selected x position of the foreground layer
|
||||
* foreypos - Selected y position of the foreground layer
|
||||
* back - Reference to the background layer
|
||||
* backarea - Reference to the selected area of the background layer
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
* -EINVAL - If one of the parameter invalid or if the size of the selected
|
||||
* source area outside the visible area of the destination layer.
|
||||
* (The visible area usually represents the display size)
|
||||
*/
|
||||
|
||||
int (*blend)(FAR struct ltdc_layer_s *dest,
|
||||
fb_coord_t destxpos, fb_coord_t destypos,
|
||||
FAR const struct dma2d_layer_s *fore,
|
||||
fb_coord_t forexpos, fb_coord_t foreypos,
|
||||
FAR const struct dma2d_layer_s *back,
|
||||
FAR const struct ltdc_area_s *backarea);
|
||||
|
||||
/* Name: fillarea
|
||||
*
|
||||
* Description:
|
||||
* Fill the selected area of the whole layer with a specific color.
|
||||
*
|
||||
* Parameter:
|
||||
* layer - Reference to the layer structure
|
||||
* area - Reference to the valid area structure select the area
|
||||
* color - Color to fill the selected area. Color must be formatted
|
||||
* according to the layer pixel format.
|
||||
*
|
||||
* Returned Value:
|
||||
* OK - On success
|
||||
* -EINVAL - If one of the parameter invalid or if the size of the selected
|
||||
* area outside the visible area of the layer.
|
||||
*/
|
||||
|
||||
int (*fillarea)(FAR struct ltdc_layer_s *layer,
|
||||
FAR const struct ltdc_area_s *area,
|
||||
uint32_t color);
|
||||
#endif
|
||||
};
|
||||
|
||||
/* Common layer state structure for the LTDC and DMA2D controller */
|
||||
|
||||
struct stm32_ltdc_s
|
||||
{
|
||||
/* Fixed settings */
|
||||
|
||||
int lid; /* Layer identifier */
|
||||
struct fb_videoinfo_s vinfo; /* Layer videoinfo */
|
||||
struct fb_planeinfo_s pinfo; /* Layer planeinfo */
|
||||
|
||||
/* Positioning */
|
||||
|
||||
struct ltdc_area_s area; /* Active layer area */
|
||||
fb_coord_t xpos; /* Reference x position */
|
||||
fb_coord_t ypos; /* Reference y position */
|
||||
|
||||
/* Coloring */
|
||||
|
||||
uint32_t color; /* Layer color definition */
|
||||
#ifdef CONFIG_FB_CMAP
|
||||
uint32_t *clut; /* 32-bit aligned clut color table */
|
||||
#endif
|
||||
|
||||
/* Blending */
|
||||
|
||||
uint8_t alpha; /* Layer constant alpha value */
|
||||
uint32_t colorkey; /* Layer colorkey */
|
||||
uint32_t blendmode; /* Layer blend factor */
|
||||
|
||||
/* Operation */
|
||||
|
||||
sem_t *lock; /* Ensure mutually exclusive access */
|
||||
};
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/* The STM32 LTDC driver uses the common framebuffer interfaces declared in
|
||||
* include/nuttx/video/fb.h.
|
||||
*/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_ltdcreset
|
||||
@ -601,9 +61,9 @@ struct stm32_ltdc_s
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_ltdcreset(void);
|
||||
void stm32_ltdcreset(void);
|
||||
|
||||
/************************************************************************************
|
||||
/*****************************************************************************
|
||||
* Name: stm32_ltdcinitialize
|
||||
*
|
||||
* Description:
|
||||
@ -612,54 +72,46 @@ struct stm32_ltdc_s
|
||||
* Returned Value:
|
||||
* OK
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
int stm32_ltdcinitialize(void);
|
||||
FAR struct fb_vtable_s *stm32_ltdcgetvplane(int vplane);
|
||||
|
||||
/*****************************************************************************
|
||||
* Name: stm32_ltdcuninitialize
|
||||
*
|
||||
* Description:
|
||||
* Unitialize the ltdc controller
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void stm32_ltdcuninitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_ltdcgetlayer
|
||||
/*****************************************************************************
|
||||
* Name: stm32_ltdcgetvplane
|
||||
*
|
||||
* Description:
|
||||
* Get the ltdc layer structure to perform hardware layer operation
|
||||
* Get video plane reference used by framebuffer interface
|
||||
*
|
||||
* Input Parameters:
|
||||
* lid - Layer identifier
|
||||
* Parameter:
|
||||
* vplane - Video plane
|
||||
*
|
||||
* Returned Value:
|
||||
* Reference to the layer control structure on success or Null if parameter
|
||||
* invalid.
|
||||
* Video plane reference
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
FAR struct ltdc_layer_s *stm32_ltdcgetlayer(int lid);
|
||||
FAR struct fb_vtable_s *stm32_ltdcgetvplane(int vplane);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: stm32_lcdclear
|
||||
*
|
||||
* Description:
|
||||
* This is a non-standard LCD interface just for the STM32 LTDC. Clearing the
|
||||
* display in the normal way by writing a sequences of runs that covers the
|
||||
* entire display can be slow. Here the display is cleared by simply setting
|
||||
* all video memory to the specified color.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void stm32_lcdclear(nxgl_mxpixel_t color);
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************
|
||||
* Name: stm32_lcd_backlight
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_STM32F7_LCD_BACKLIGHT is defined, then the board-specific logic must
|
||||
* provide this interface to turn the backlight on and off.
|
||||
* If CONFIG_STM32F7_LCD_BACKLIGHT is defined, then the board-specific logic
|
||||
* must provide this interface to turn the backlight on and off.
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_STM32F7_LCD_BACKLIGHT
|
||||
void stm32_backlight(bool blon);
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_STM32F7_LTDC */
|
||||
#endif /* __ARCH_ARM_SRC_STM32F7_STM32_LTDC_H */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user