From 6e86d7f535cc0aba5ef8bdb8e4efc5c685aa3816 Mon Sep 17 00:00:00 2001
From: Gregory Nutt <gnutt@nuttx.org>
Date: Sun, 21 Jul 2019 11:33:30 -0600
Subject: [PATCH] ReleaseNotes: Remove bugfixes on things added in 7.31 that
did not appear in 7.30. The ReleaseNotes should be purely a delta between
the two versions.
---
ReleaseNotes | 38 --------------------------------------
1 file changed, 38 deletions(-)
diff --git a/ReleaseNotes b/ReleaseNotes
index 93d4390ce4..b17f00dd9e 100644
--- a/ReleaseNotes
+++ b/ReleaseNotes
@@ -24139,8 +24139,6 @@ detailed bugfix information):
causes the lsb of pipe number to interfere with the received packet
size stored in the FIFO. This fix RX corruption when using pipe
number > 0. From Federico Braghiroli.
- - GS2200M: Fix a passive close when sending a packet in gs2200m.c.
- From Masayuki Ishikawa.
* Graphics/Display Drivers:
@@ -24259,7 +24257,6 @@ detailed bugfix information):
Otherwise, it is not possible to use multiple NxTerms with each the
keyboard input going to a different NxTerm window. From Gregory
Nutt.
- - PNEV5180B: CDC/ECM requires SCHED_LPWORK. From Gregory Nutt.
* NXP i.MXRT Drivers:
@@ -24280,21 +24277,6 @@ detailed bugfix information):
- EFM32 USB Host: Apply Adam Porter's STM32 fix to EFM32 which has
the same IP. From Gregory Nutt.
- * Sony CXD56xx Drivers:
-
- - CXD56xx USB: Fix ep0 out packet handling in CXD56_usbdev.c. This
- change fixes to handle ep0 out packet which exceeds EP0_MAXSIZE.
- For example, 76 bytes of out packet is sent from RNDIS host during
- RNDIS negotiation and finally the packet is split into two out
- packets (64 bytes out packet + 12 bytes out packet). To handle
- these packets, actual ep0reqlen is stored during ep0 out setup
- stage, and if all out packets are received, it dispatches to
- cxd56_ep0setup(), otherwise, it sets up the internal USB DMA to
- receive remaining out packets. From Masayuki Ishikawa.
- - CXD56xx: Fix cxd56_wdt.c in debug build. From Masayuki Ishikawa.
- - CXD56xx: Fix DMA initialization in cxd56_dmac.c. up_dma_initialize()
- must be used instead of up_dmainitialize(). From Masayuki Ishikawa.
-
* STMicro STM32:
- STM32F1 Pinmap: Fix names for complementary PWM outputs From
@@ -24415,20 +24397,6 @@ detailed bugfix information):
Gregory Nutt.
- eZ80: Fix a logic error in vector initialization. From Gregory Nutt.
- * ZiLOG eZ80Acclaim! Drivers:
-
- - eZ80 SPI: Fix to SPI baud rate calculation. Driver now has
- timeouts so that at least it can not hang the system on startup.
- From Gregory Nutt.
- - eZ80 SPI: Fix a poorly constructed loop in the SPI driver that
- would lead to hangs. From Gregory Nutt.
- - eZ80 RTC: Correct setting of RTC time. From Gregory Nutt.
-
- * ZiLOG eZ80Acclaim! Boards
-
- - MakerLisp: Fix an error that was causing MMC/SD to fail to
- initialize. From Gregory Nutt.
-
* C Library/Header Files:
- signal.h: Fix a C89 compliance problem that cause the eZ80 build to
@@ -24459,8 +24427,6 @@ detailed bugfix information):
* Tools:
- - tools/ocdconsole.py: Fix small typo on ocdconsole.py script From
- Alan Carvalho de Assis.
- tools/nxstyle.c: Fix error in conditional logic that was preventing
detection bad brace alignment. Add logic to handle alignment of
braces in data initializers which following slightly different
@@ -24493,10 +24459,6 @@ detailed bugfix information):
caused the eZ80 build to fail. From Gregory Nutt.
- apps/netutils/json: Removed. Replaced with apps/netutils/cjson.
From Gregory Nutt.
- - apps/netutils/cjson/Kconfig: stdio floating point support required.
- cJSON requires floating point support in printf (specifically the
- 'g' conversion specifier). Thus, select LIBC_FLOATINGPOINT when
- NETUTILS_CJSON is selected. From Michael Jung.
* Graphics Utilities: apps/graphics: