Olimex-stm32-p407: Add a NSH protected build configuration; Enable procfs/ in all configurations.
This commit is contained in:
Gregory Nutt
parent
a06d26e044
commit
6f5a9eb451
@ -30,9 +30,12 @@ The following peripherals are available in this configuration.
|
||||
- CAN: Built in app 'can' works, but apart from that not really tested.
|
||||
|
||||
- Ethernet: Ping to other station on the network works.
|
||||
|
||||
Configurations
|
||||
==============
|
||||
|
||||
Information Common to All Configurations
|
||||
----------------------------------------
|
||||
Each Olimex STM32-P407 configuration is maintained in a sub-directory and can be
|
||||
selected as follow:
|
||||
|
||||
@ -41,12 +44,18 @@ selected as follow:
|
||||
cd -
|
||||
. ./setenv.sh
|
||||
|
||||
Where <subdir> is one of the following:
|
||||
Where <subdir> is one of the configuration sub-directories listed in the
|
||||
following section.
|
||||
|
||||
nsh:
|
||||
Before sourcing the setenv.sh file above, you should examine it and perform
|
||||
edits as necessary so that TOOLCHAIN_BIN is the correct path to the directory
|
||||
than holds your toolchain binaries.
|
||||
|
||||
This is the NuttShell (NSH) using the NSH startup logic at
|
||||
apps/examples/nsh.
|
||||
And then build NuttX by simply typing the following. At the conclusion of
|
||||
the make, the nuttx binary will reside in an ELF file called, simply, nuttx.
|
||||
|
||||
make oldconfig
|
||||
make
|
||||
|
||||
NOTES:
|
||||
|
||||
@ -72,7 +81,99 @@ Where <subdir> is one of the following:
|
||||
buildroot toolchain. The host and/or toolchain selection can easily
|
||||
be changed with 'make menuconfig'.
|
||||
|
||||
4. Kernel Modules
|
||||
Configuration sub-directories
|
||||
-----------------------------
|
||||
|
||||
The <subdir> that is provided above as an argument to the tools/configure.sh
|
||||
must be is one of the following.
|
||||
|
||||
knsh:
|
||||
|
||||
This is identical to the nsh configuration below except that NuttX
|
||||
is built as a PROTECTED mode, monolithic module and the user applications
|
||||
are built separately.
|
||||
|
||||
It is recommends to use a special make command; not just 'make' but make
|
||||
with the following two arguments:
|
||||
|
||||
make pass1 pass2
|
||||
|
||||
In the normal case (just 'make'), make will attempt to build both user-
|
||||
and kernel-mode blobs more or less interleaved. That actual works!
|
||||
However, for me it is very confusing so I prefer the above make command:
|
||||
Make the user-space binaries first (pass1), then make the kernel-space
|
||||
binaries (pass2)
|
||||
|
||||
NOTES:
|
||||
|
||||
1. At the end of the build, there will be several files in the top-level
|
||||
NuttX build directory:
|
||||
|
||||
PASS1:
|
||||
nuttx_user.elf - The pass1 user-space ELF file
|
||||
nuttx_user.hex - The pass1 Intel HEX format file (selected in defconfig)
|
||||
User.map - Symbols in the user-space ELF file
|
||||
|
||||
PASS2:
|
||||
nuttx - The pass2 kernel-space ELF file
|
||||
nuttx.hex - The pass2 Intel HEX file (selected in defconfig)
|
||||
System.map - Symbols in the kernel-space ELF file
|
||||
|
||||
The J-Link programmer will except files in .hex, .mot, .srec, and .bin
|
||||
formats.
|
||||
|
||||
2. Combining .hex files. If you plan to use the .hex files with your
|
||||
debugger or FLASH utility, then you may need to combine the two hex
|
||||
files into a single .hex file. Here is how you can do that.
|
||||
|
||||
a. The 'tail' of the nuttx.hex file should look something like this
|
||||
(with my comments added):
|
||||
|
||||
$ tail nuttx.hex
|
||||
# 00, data records
|
||||
...
|
||||
:10 9DC0 00 01000000000800006400020100001F0004
|
||||
:10 9DD0 00 3B005A0078009700B500D400F300110151
|
||||
:08 9DE0 00 30014E016D0100008D
|
||||
# 05, Start Linear Address Record
|
||||
:04 0000 05 0800 0419 D2
|
||||
# 01, End Of File record
|
||||
:00 0000 01 FF
|
||||
|
||||
Use an editor such as vi to remove the 05 and 01 records.
|
||||
|
||||
b. The 'head' of the nuttx_user.hex file should look something like
|
||||
this (again with my comments added):
|
||||
|
||||
$ head nuttx_user.hex
|
||||
# 04, Extended Linear Address Record
|
||||
:02 0000 04 0801 F1
|
||||
# 00, data records
|
||||
:10 8000 00 BD89 01084C800108C8110208D01102087E
|
||||
:10 8010 00 0010 00201C1000201C1000203C16002026
|
||||
:10 8020 00 4D80 01085D80010869800108ED83010829
|
||||
...
|
||||
|
||||
Nothing needs to be done here. The nuttx_user.hex file should
|
||||
be fine.
|
||||
|
||||
c. Combine the edited nuttx.hex and un-edited nuttx_user.hex
|
||||
file to produce a single combined hex file:
|
||||
|
||||
$ cat nuttx.hex nuttx_user.hex >combined.hex
|
||||
|
||||
Then use the combined.hex file with the to write the FLASH image.
|
||||
If you do this a lot, you will probably want to invest a little time
|
||||
to develop a tool to automate these steps.
|
||||
|
||||
nsh:
|
||||
|
||||
This is the NuttShell (NSH) using the NSH startup logic at
|
||||
apps/examples/nsh.
|
||||
|
||||
NOTES:
|
||||
|
||||
1. Kernel Modules
|
||||
|
||||
I used this configuration for testing NuttX kernel modules with the
|
||||
following configuration additions to the configuration file:
|
||||
|
||||
2
configs/olimex-stm32-p407/kernel/.gitignore
vendored
Normal file
2
configs/olimex-stm32-p407/kernel/.gitignore
vendored
Normal file
@ -0,0 +1,2 @@
|
||||
/nuttx_user.elf
|
||||
|
||||
122
configs/olimex-stm32-p407/kernel/Makefile
Normal file
122
configs/olimex-stm32-p407/kernel/Makefile
Normal file
@ -0,0 +1,122 @@
|
||||
############################################################################
|
||||
# configs/olimex-stm32-p407/kernel/Makefile
|
||||
#
|
||||
# Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
# This is the directory for the board-specific header files
|
||||
|
||||
BOARD_INCLUDE = $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include
|
||||
|
||||
# The entry point name (if none is provided in the .config file)
|
||||
|
||||
CONFIG_USER_ENTRYPOINT ?= user_start
|
||||
ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
|
||||
|
||||
# Get the paths to the libraries and the links script path in format that
|
||||
# is appropriate for the host OS
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
|
||||
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
|
||||
USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
|
||||
USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
|
||||
USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
|
||||
USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
|
||||
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
|
||||
USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
|
||||
USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
|
||||
USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
|
||||
USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
|
||||
endif
|
||||
|
||||
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
|
||||
USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS))))
|
||||
USER_LIBGCC = "${shell "$(CC)" $(ARCHCPUFLAGS) -print-libgcc-file-name}"
|
||||
|
||||
# Source files
|
||||
|
||||
CSRCS = stm32_userspace.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
OBJS = $(COBJS)
|
||||
|
||||
# Targets:
|
||||
|
||||
all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map
|
||||
.PHONY: nuttx_user.elf depend clean distclean
|
||||
|
||||
$(COBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
# Create the nuttx_user.elf file containing all of the user-mode code
|
||||
|
||||
nuttx_user.elf: $(OBJS)
|
||||
$(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC)
|
||||
|
||||
$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
|
||||
@echo "LD: nuttx_user.elf"
|
||||
$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
|
||||
ifeq ($(CONFIG_INTELHEX_BINARY),y)
|
||||
@echo "CP: nuttx_user.hex"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_MOTOROLA_SREC),y)
|
||||
@echo "CP: nuttx_user.srec"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_RAW_BINARY),y)
|
||||
@echo "CP: nuttx_user.bin"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
|
||||
endif
|
||||
|
||||
$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
|
||||
@echo "MK: User.map"
|
||||
$(Q) $(NM) nuttx_user.elf >$(TOPDIR)$(DELIM)User.map
|
||||
$(Q) $(CROSSDEV)size nuttx_user.elf
|
||||
|
||||
.depend:
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, nuttx_user.elf)
|
||||
$(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.*")
|
||||
$(call DELFILE, "$(TOPDIR)$(DELIM)User.map")
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
133
configs/olimex-stm32-p407/kernel/stm32_userspace.c
Normal file
133
configs/olimex-stm32-p407/kernel/stm32_userspace.c
Normal file
@ -0,0 +1,133 @@
|
||||
/****************************************************************************
|
||||
* configs/olimex-stm32-p407/kernel/stm32_userspace.c
|
||||
*
|
||||
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdlib.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/mm/mm.h>
|
||||
#include <nuttx/wqueue.h>
|
||||
#include <nuttx/userspace.h>
|
||||
|
||||
#if defined(CONFIG_BUILD_PROTECTED) && !defined(__KERNEL__)
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
#ifndef CONFIG_NUTTX_USERSPACE
|
||||
# error "CONFIG_NUTTX_USERSPACE not defined"
|
||||
#endif
|
||||
|
||||
#if CONFIG_NUTTX_USERSPACE != 0x08020000
|
||||
# error "CONFIG_NUTTX_USERSPACE must be 0x08020000 to match memory.ld"
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
/* These 'addresses' of these values are setup by the linker script. They are
|
||||
* not actual uint32_t storage locations! They are only used meaningfully in the
|
||||
* following way:
|
||||
*
|
||||
* - The linker script defines, for example, the symbol_sdata.
|
||||
* - The declaration extern uint32_t _sdata; makes C happy. C will believe
|
||||
* that the value _sdata is the address of a uint32_t variable _data (it is
|
||||
* not!).
|
||||
* - We can recover the linker value then by simply taking the address of
|
||||
* of _data. like: uint32_t *pdata = &_sdata;
|
||||
*/
|
||||
|
||||
extern uint32_t _stext; /* Start of .text */
|
||||
extern uint32_t _etext; /* End_1 of .text + .rodata */
|
||||
extern const uint32_t _eronly; /* End+1 of read only section (.text + .rodata) */
|
||||
extern uint32_t _sdata; /* Start of .data */
|
||||
extern uint32_t _edata; /* End+1 of .data */
|
||||
extern uint32_t _sbss; /* Start of .bss */
|
||||
extern uint32_t _ebss; /* End+1 of .bss */
|
||||
|
||||
/* This is the user space entry point */
|
||||
|
||||
int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]);
|
||||
|
||||
const struct userspace_s userspace __attribute__ ((section (".userspace"))) =
|
||||
{
|
||||
/* General memory map */
|
||||
|
||||
.us_entrypoint = (main_t)CONFIG_USER_ENTRYPOINT,
|
||||
.us_textstart = (uintptr_t)&_stext,
|
||||
.us_textend = (uintptr_t)&_etext,
|
||||
.us_datasource = (uintptr_t)&_eronly,
|
||||
.us_datastart = (uintptr_t)&_sdata,
|
||||
.us_dataend = (uintptr_t)&_edata,
|
||||
.us_bssstart = (uintptr_t)&_sbss,
|
||||
.us_bssend = (uintptr_t)&_ebss,
|
||||
|
||||
/* Memory manager heap structure */
|
||||
|
||||
.us_heap = &g_mmheap,
|
||||
|
||||
/* Task/thread startup routines */
|
||||
|
||||
.task_startup = task_startup,
|
||||
#ifndef CONFIG_DISABLE_PTHREAD
|
||||
.pthread_startup = pthread_startup,
|
||||
#endif
|
||||
|
||||
/* Signal handler trampoline */
|
||||
|
||||
#ifndef CONFIG_DISABLE_SIGNALS
|
||||
.signal_handler = up_signal_handler,
|
||||
#endif
|
||||
|
||||
/* User-space work queue support (declared in include/nuttx/wqueue.h) */
|
||||
|
||||
#ifdef CONFIG_LIB_USRWORK
|
||||
.work_usrstart = work_usrstart,
|
||||
#endif
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
#endif /* CONFIG_BUILD_PROTECTED && !__KERNEL__ */
|
||||
125
configs/olimex-stm32-p407/knsh/Make.defs
Normal file
125
configs/olimex-stm32-p407/knsh/Make.defs
Normal file
@ -0,0 +1,125 @@
|
||||
############################################################################
|
||||
# configs/olimex-stm32-p407/knsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT1 = memory.ld
|
||||
LDSCRIPT2 = kernel-space.ld
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT1)}"
|
||||
ARCHSCRIPT += -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT2)}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT1)
|
||||
ARCHSCRIPT += -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT2)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
# Loadable module definitions
|
||||
|
||||
CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
|
||||
|
||||
LDMODULEFLAGS = -r -e module_initialize
|
||||
ifeq ($(WINTOOL),y)
|
||||
LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/sched/module/gnu-elf.ld}"
|
||||
else
|
||||
LDMODULEFLAGS += -T $(TOPDIR)/sched/module/gnu-elf.ld
|
||||
endif
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
1231
configs/olimex-stm32-p407/knsh/defconfig
Normal file
1231
configs/olimex-stm32-p407/knsh/defconfig
Normal file
File diff suppressed because it is too large
Load Diff
80
configs/olimex-stm32-p407/knsh/setenv.sh
Normal file
80
configs/olimex-stm32-p407/knsh/setenv.sh
Normal file
@ -0,0 +1,80 @@
|
||||
#!/bin/bash
|
||||
# configs/olimex-stm32-p407/knsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
|
||||
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin"
|
||||
|
||||
# This is the path to the location where I installed the devkitARM toolchain
|
||||
# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@ -37,7 +37,7 @@ include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
LDSCRIPT = ld.script
|
||||
LDSCRIPT = flash.ld
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
|
||||
@ -106,7 +106,9 @@ CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
# CONFIG_ARCH_CORTEXM23 is not set
|
||||
# CONFIG_ARCH_CORTEXM3 is not set
|
||||
# CONFIG_ARCH_CORTEXM33 is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
# CONFIG_ARCH_CORTEXM7 is not set
|
||||
# CONFIG_ARCH_CORTEXA5 is not set
|
||||
@ -857,7 +859,7 @@ CONFIG_SYSLOG_CONSOLE=y
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_AUTOMOUNTER is not set
|
||||
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
|
||||
# CONFIG_FS_READABLE is not set
|
||||
CONFIG_FS_READABLE=y
|
||||
# CONFIG_FS_WRITABLE is not set
|
||||
# CONFIG_FS_NAMED_SEMAPHORES is not set
|
||||
CONFIG_FS_MQUEUE_MPATH="/var/mqueue"
|
||||
@ -868,7 +870,15 @@ CONFIG_FS_MQUEUE_MPATH="/var/mqueue"
|
||||
# CONFIG_FS_TMPFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_BINFS is not set
|
||||
# CONFIG_FS_PROCFS is not set
|
||||
CONFIG_FS_PROCFS=y
|
||||
# CONFIG_FS_PROCFS_REGISTER is not set
|
||||
|
||||
#
|
||||
# Exclude individual procfs entries
|
||||
#
|
||||
# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set
|
||||
# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set
|
||||
# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set
|
||||
# CONFIG_FS_UNIONFS is not set
|
||||
|
||||
#
|
||||
@ -915,10 +925,25 @@ CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBC_DLLFCN is not set
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCPY is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCMP is not set
|
||||
# CONFIG_LIBC_ARCH_MEMMOVE is not set
|
||||
# CONFIG_LIBC_ARCH_MEMSET is not set
|
||||
# CONFIG_LIBC_ARCH_STRCHR is not set
|
||||
# CONFIG_LIBC_ARCH_STRCMP is not set
|
||||
# CONFIG_LIBC_ARCH_STRCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRNCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRLEN is not set
|
||||
# CONFIG_LIBC_ARCH_STRNLEN is not set
|
||||
# CONFIG_LIBC_ARCH_BZERO is not set
|
||||
# CONFIG_LIBC_ARCH_ELF is not set
|
||||
# CONFIG_ARMV7M_MEMCPY is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIBC_LONG_LONG=y
|
||||
# CONFIG_LIBC_SCANSET is not set
|
||||
# CONFIG_LIBC_IOCTL_VARIADIC is not set
|
||||
# CONFIG_LIBC_WCHAR is not set
|
||||
# CONFIG_LIBC_LOCALE is not set
|
||||
@ -937,11 +962,14 @@ CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_TIME_EXTENDED is not set
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_MEMCPY_VIK is not set
|
||||
# CONFIG_MEMSET_OPTSPEED is not set
|
||||
CONFIG_ARCH_HAVE_TLS=y
|
||||
# CONFIG_TLS is not set
|
||||
# CONFIG_LIBC_IPv4_ADDRCONV is not set
|
||||
# CONFIG_LIBC_IPv6_ADDRCONV is not set
|
||||
# CONFIG_LIBC_NETDB is not set
|
||||
# CONFIG_NETDB_HOSTFILE is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
@ -1037,6 +1065,7 @@ CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
# File System Utilities
|
||||
#
|
||||
# CONFIG_FSUTILS_INIFILE is not set
|
||||
# CONFIG_FSUTILS_PASSWD is not set
|
||||
|
||||
#
|
||||
# GPS Utilities
|
||||
@ -1052,6 +1081,7 @@ CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_BAS is not set
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_MICROPYTHON is not set
|
||||
# CONFIG_INTERPRETERS_MINIBASIC is not set
|
||||
@ -1151,6 +1181,7 @@ CONFIG_NSH_MMCSDMINOR=0
|
||||
# CONFIG_NSH_CMDOPT_DD_STATS is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_CMDOPT_HEXDUMP=y
|
||||
CONFIG_NSH_PROC_MOUNTPOINT="/proc"
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
|
||||
#
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
/****************************************************************************
|
||||
* configs/olimex-stm32-p407/scripts/ld.script
|
||||
* configs/olimex-stm32-p407/scripts/flash.ld
|
||||
*
|
||||
* Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
111
configs/olimex-stm32-p407/scripts/kernel-space.ld
Normal file
111
configs/olimex-stm32-p407/scripts/kernel-space.ld
Normal file
@ -0,0 +1,111 @@
|
||||
/****************************************************************************
|
||||
* configs/olimex-stm32-p407/scripts/kernel-space.ld
|
||||
*
|
||||
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* NOTE: This depends on the memory.ld script having been included prior to
|
||||
* this script.
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
EXTERN(_vectors)
|
||||
ENTRY(_stext)
|
||||
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > kflash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > kflash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > kflash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > kflash
|
||||
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > ksram AT > kflash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > ksram
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
100
configs/olimex-stm32-p407/scripts/memory.ld
Normal file
100
configs/olimex-stm32-p407/scripts/memory.ld
Normal file
@ -0,0 +1,100 @@
|
||||
/****************************************************************************
|
||||
* configs/olimex-stm32-p407/scripts/memory.ld
|
||||
*
|
||||
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 192Kb of SRAM. SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 112KB of SRAM beginning at address 0x2000:0000
|
||||
* 2) 16KB of SRAM beginning at address 0x2001:c000
|
||||
* 3) 64KB of CCM SRAM beginning at address 0x1000:0000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*
|
||||
* For MPU support, the kernel-mode NuttX section is assumed to be 128Kb of
|
||||
* FLASH and 4Kb of SRAM. That is an excessive amount for the kernel which
|
||||
* should fit into 64KB and, of course, can be optimized as needed (See
|
||||
* also configs/stm32f4discovery/scripts/kernel-space.ld). Allowing the
|
||||
* additional does permit addition debug instrumentation to be added to the
|
||||
* kernel space without overflowing the partition.
|
||||
*
|
||||
* Alignment of the user space FLASH partition is also a critical factor:
|
||||
* The user space FLASH partition will be spanned with a single region of
|
||||
* size 2**n bytes. The alignment of the user-space region must be the same.
|
||||
* As a consequence, as the user-space increases in size, the alignmment
|
||||
* requirement also increases.
|
||||
*
|
||||
* This alignment requirement means that the largest user space FLASH region
|
||||
* you can have will be 512KB at it would have to be positioned at
|
||||
* 0x08800000. If you change this address, don't forget to change the
|
||||
* CONFIG_NUTTX_USERSPACE configuration setting to match and to modify
|
||||
* the check in kernel/userspace.c.
|
||||
*
|
||||
* For the same reasons, the maximum size of the SRAM mapping is limited to
|
||||
* 4KB. Both of these alignment limitations could be reduced by using
|
||||
* multiple regions to map the FLASH/SDRAM range or perhaps with some
|
||||
* clever use of subregions.
|
||||
*
|
||||
* A detailed memory map for the 112KB SRAM region is as follows:
|
||||
*
|
||||
* 0x20000 0000: Kernel .data region. Typical size: 0.1KB
|
||||
* ------- ---- Kernel .bss region. Typical size: 1.8KB
|
||||
* 0x20000 0800: Kernel IDLE thread stack (approximate). Size is
|
||||
* determined by CONFIG_IDLETHREAD_STACKSIZE and
|
||||
* adjustments for alignment. Typical is 1KB.
|
||||
* ------- ---- Padded to 4KB
|
||||
* 0x20000 1000: User .data region. Size is variable.
|
||||
* ------- ---- User .bss region Size is variable.
|
||||
* 0x20000 2000: Beginning of kernel heap. Size determined by
|
||||
* CONFIG_MM_KERNEL_HEAPSIZE.
|
||||
* ------- ---- Beginning of user heap. Can vary with other settings.
|
||||
* 0x20001 c000: End+1 of CPU RAM
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/* 1024Kb FLASH */
|
||||
|
||||
kflash (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||
uflash (rx) : ORIGIN = 0x08020000, LENGTH = 128K
|
||||
xflash (rx) : ORIGIN = 0x08040000, LENGTH = 768K
|
||||
|
||||
/* 112Kb of contiguous SRAM */
|
||||
|
||||
ksram (rwx) : ORIGIN = 0x20000000, LENGTH = 4K
|
||||
usram (rwx) : ORIGIN = 0x20001000, LENGTH = 4K
|
||||
xsram (rwx) : ORIGIN = 0x20002000, LENGTH = 104K
|
||||
}
|
||||
126
configs/olimex-stm32-p407/scripts/user-space.ld
Normal file
126
configs/olimex-stm32-p407/scripts/user-space.ld
Normal file
@ -0,0 +1,126 @@
|
||||
/****************************************************************************
|
||||
* configs/olimex-stm32-p407/scripts/user-space.ld
|
||||
*
|
||||
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* NOTE: This depends on the memory.ld script having been included prior to
|
||||
* this script.
|
||||
*/
|
||||
|
||||
/* Make sure that the critical memory management functions are in user-space.
|
||||
* the user heap memory manager will reside in user-space but be usable both
|
||||
* by kernel- and user-space code
|
||||
*/
|
||||
|
||||
EXTERN(umm_initialize)
|
||||
EXTERN(umm_addregion)
|
||||
EXTERN(umm_trysemaphore)
|
||||
EXTERN(umm_givesemaphore)
|
||||
|
||||
EXTERN(malloc)
|
||||
EXTERN(realloc)
|
||||
EXTERN(zalloc)
|
||||
EXTERN(free)
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
SECTIONS
|
||||
{
|
||||
.userspace : {
|
||||
*(.userspace)
|
||||
} > uflash
|
||||
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > uflash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > uflash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > uflash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > uflash
|
||||
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > usram AT > uflash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > usram
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@ -1652,7 +1652,7 @@ Configuration sub-directories
|
||||
knsh:
|
||||
|
||||
This is identical to the nsh configuration below except that NuttX
|
||||
is built as a kernel-mode, monolithic module and the user applications
|
||||
is built as a protected mode, monolithic module and the user applications
|
||||
are built separately. There are four very similar NSH configurations:
|
||||
|
||||
- knsh. This is a somewhat simplified version of the nsh configuration
|
||||
|
||||
@ -12,8 +12,10 @@
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
CONFIG_TOOLCHAIN_WINDOWS=y
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_UBUNTU is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
@ -69,9 +71,12 @@ CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_MISOC is not set
|
||||
# CONFIG_ARCH_RENESAS is not set
|
||||
# CONFIG_ARCH_RISCV is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_XTENSA is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
@ -111,7 +116,9 @@ CONFIG_ARCH_CHIP_SAMV7=y
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
# CONFIG_ARCH_CORTEXM23 is not set
|
||||
# CONFIG_ARCH_CORTEXM3 is not set
|
||||
# CONFIG_ARCH_CORTEXM33 is not set
|
||||
# CONFIG_ARCH_CORTEXM4 is not set
|
||||
CONFIG_ARCH_CORTEXM7=y
|
||||
# CONFIG_ARCH_CORTEXA5 is not set
|
||||
@ -199,6 +206,7 @@ CONFIG_ARCH_CHIP_SAMV71Q=y
|
||||
# CONFIG_ARCH_CHIP_SAMV71J is not set
|
||||
# CONFIG_SAMV7_MCAN is not set
|
||||
CONFIG_SAMV7_HAVE_MCAN1=y
|
||||
# CONFIG_SAMV7_DAC is not set
|
||||
CONFIG_SAMV7_HAVE_DAC1=y
|
||||
CONFIG_SAMV7_HAVE_EBI=y
|
||||
# CONFIG_SAMV7_EMAC is not set
|
||||
@ -421,6 +429,7 @@ CONFIG_PREALLOC_TIMERS=4
|
||||
#
|
||||
# Tasks and Scheduling
|
||||
#
|
||||
# CONFIG_SPINLOCK is not set
|
||||
# CONFIG_INIT_NONE is not set
|
||||
CONFIG_INIT_ENTRYPOINT=y
|
||||
# CONFIG_INIT_FILEPATH is not set
|
||||
@ -437,6 +446,8 @@ CONFIG_SCHED_WAITPID=y
|
||||
#
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
# CONFIG_PTHREAD_CLEANUP is not set
|
||||
# CONFIG_CANCELLATION_POINTS is not set
|
||||
|
||||
#
|
||||
# Performance Monitoring
|
||||
@ -528,15 +539,15 @@ CONFIG_I2C=y
|
||||
# CONFIG_I2C_TRACE is not set
|
||||
CONFIG_I2C_DRIVER=y
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
|
||||
CONFIG_ARCH_HAVE_SPI_CS_CONTROL=y
|
||||
# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
|
||||
# CONFIG_SPI_SLAVE is not set
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_SPI_CALLBACK is not set
|
||||
# CONFIG_SPI_HWFEATURES is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
|
||||
CONFIG_ARCH_HAVE_SPI_CS_CONTROL=y
|
||||
# CONFIG_SPI_CS_CONTROL is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_BITORDER is not set
|
||||
# CONFIG_SPI_CS_DELAY_CONTROL is not set
|
||||
# CONFIG_SPI_DRIVER is not set
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
@ -546,6 +557,7 @@ CONFIG_ARCH_HAVE_SPI_CS_CONTROL=y
|
||||
# Timer Driver Support
|
||||
#
|
||||
# CONFIG_TIMER is not set
|
||||
# CONFIG_ONESHOT is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_TIMERS_CS2100CP is not set
|
||||
@ -620,6 +632,7 @@ CONFIG_AT25_SPIFREQUENCY=20000000
|
||||
# CONFIG_MTD_AT45DB is not set
|
||||
# CONFIG_MTD_IS25XP is not set
|
||||
# CONFIG_MTD_M25P is not set
|
||||
# CONFIG_MTD_MX25L is not set
|
||||
# CONFIG_MTD_S25FL1 is not set
|
||||
# CONFIG_MTD_N25QXXX is not set
|
||||
# CONFIG_MTD_SMART is not set
|
||||
@ -688,6 +701,7 @@ CONFIG_UART3_2STOP=0
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_HAVE_USBTRACE is not set
|
||||
# CONFIG_DRIVERS_WIRELESS is not set
|
||||
# CONFIG_DRIVERS_CONTACTLESS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
@ -801,10 +815,26 @@ CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCPY is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCMP is not set
|
||||
# CONFIG_LIBC_ARCH_MEMMOVE is not set
|
||||
# CONFIG_LIBC_ARCH_MEMSET is not set
|
||||
# CONFIG_LIBC_ARCH_STRCHR is not set
|
||||
# CONFIG_LIBC_ARCH_STRCMP is not set
|
||||
# CONFIG_LIBC_ARCH_STRCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRNCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRLEN is not set
|
||||
# CONFIG_LIBC_ARCH_STRNLEN is not set
|
||||
# CONFIG_LIBC_ARCH_BZERO is not set
|
||||
# CONFIG_LIBC_ARCH_ELF is not set
|
||||
# CONFIG_ARMV7M_MEMCPY is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIBC_LONG_LONG=y
|
||||
# CONFIG_LIBC_SCANSET is not set
|
||||
# CONFIG_LIBC_IOCTL_VARIADIC is not set
|
||||
# CONFIG_LIBC_WCHAR is not set
|
||||
# CONFIG_LIBC_LOCALE is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
@ -822,8 +852,12 @@ CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_TIME_EXTENDED is not set
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_MEMCPY_VIK is not set
|
||||
# CONFIG_MEMSET_OPTSPEED is not set
|
||||
CONFIG_ARCH_HAVE_TLS=y
|
||||
# CONFIG_TLS is not set
|
||||
# CONFIG_LIBC_IPv4_ADDRCONV is not set
|
||||
# CONFIG_LIBC_IPv6_ADDRCONV is not set
|
||||
# CONFIG_LIBC_NETDB is not set
|
||||
# CONFIG_NETDB_HOSTFILE is not set
|
||||
|
||||
@ -853,6 +887,8 @@ CONFIG_ARCH_HAVE_TLS=y
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CCTYPE is not set
|
||||
# CONFIG_EXAMPLES_CHAT is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
@ -924,6 +960,7 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_INTERPRETERS_BAS is not set
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_MICROPYTHON is not set
|
||||
# CONFIG_INTERPRETERS_MINIBASIC is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
@ -994,6 +1031,7 @@ CONFIG_NSH_DISABLE_MKRD=y
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MV is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
CONFIG_NSH_DISABLE_PRINTF=y
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
@ -1070,6 +1108,8 @@ CONFIG_READLINE_ECHO=y
|
||||
# CONFIG_READLINE_TABCOMPLETION is not set
|
||||
# CONFIG_READLINE_CMD_HISTORY is not set
|
||||
# CONFIG_SYSTEM_SUDOKU is not set
|
||||
# CONFIG_SYSTEM_SYSTEM is not set
|
||||
# CONFIG_SYSTEM_TEE is not set
|
||||
# CONFIG_SYSTEM_UBLOXMODEM is not set
|
||||
# CONFIG_SYSTEM_VI is not set
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
|
||||
@ -12,8 +12,10 @@
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
CONFIG_TOOLCHAIN_WINDOWS=y
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_UBUNTU is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
@ -109,7 +111,9 @@ CONFIG_ARCH_CHIP_SAMV7=y
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
# CONFIG_ARCH_CORTEXM23 is not set
|
||||
# CONFIG_ARCH_CORTEXM3 is not set
|
||||
# CONFIG_ARCH_CORTEXM33 is not set
|
||||
# CONFIG_ARCH_CORTEXM4 is not set
|
||||
CONFIG_ARCH_CORTEXM7=y
|
||||
# CONFIG_ARCH_CORTEXA5 is not set
|
||||
@ -420,6 +424,7 @@ CONFIG_PREALLOC_TIMERS=4
|
||||
#
|
||||
# Tasks and Scheduling
|
||||
#
|
||||
# CONFIG_SPINLOCK is not set
|
||||
# CONFIG_INIT_NONE is not set
|
||||
CONFIG_INIT_ENTRYPOINT=y
|
||||
# CONFIG_INIT_FILEPATH is not set
|
||||
@ -436,6 +441,8 @@ CONFIG_SCHED_WAITPID=y
|
||||
#
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
# CONFIG_PTHREAD_CLEANUP is not set
|
||||
# CONFIG_CANCELLATION_POINTS is not set
|
||||
|
||||
#
|
||||
# Performance Monitoring
|
||||
@ -800,10 +807,25 @@ CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBC_DLLFCN is not set
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCPY is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCMP is not set
|
||||
# CONFIG_LIBC_ARCH_MEMMOVE is not set
|
||||
# CONFIG_LIBC_ARCH_MEMSET is not set
|
||||
# CONFIG_LIBC_ARCH_STRCHR is not set
|
||||
# CONFIG_LIBC_ARCH_STRCMP is not set
|
||||
# CONFIG_LIBC_ARCH_STRCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRNCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRLEN is not set
|
||||
# CONFIG_LIBC_ARCH_STRNLEN is not set
|
||||
# CONFIG_LIBC_ARCH_BZERO is not set
|
||||
# CONFIG_LIBC_ARCH_ELF is not set
|
||||
# CONFIG_ARMV7M_MEMCPY is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIBC_LONG_LONG=y
|
||||
# CONFIG_LIBC_SCANSET is not set
|
||||
# CONFIG_LIBC_IOCTL_VARIADIC is not set
|
||||
# CONFIG_LIBC_WCHAR is not set
|
||||
# CONFIG_LIBC_LOCALE is not set
|
||||
@ -824,8 +846,12 @@ CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_TIME_EXTENDED is not set
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_MEMCPY_VIK is not set
|
||||
# CONFIG_MEMSET_OPTSPEED is not set
|
||||
CONFIG_ARCH_HAVE_TLS=y
|
||||
# CONFIG_TLS is not set
|
||||
# CONFIG_LIBC_IPv4_ADDRCONV is not set
|
||||
# CONFIG_LIBC_IPv6_ADDRCONV is not set
|
||||
# CONFIG_LIBC_NETDB is not set
|
||||
# CONFIG_NETDB_HOSTFILE is not set
|
||||
|
||||
@ -1030,6 +1056,7 @@ CONFIG_NSH_MMCSDSLOTNO=0
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
# CONFIG_NSH_CMDOPT_DD_STATS is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_CMDOPT_HEXDUMP=y
|
||||
CONFIG_NSH_PROC_MOUNTPOINT="/proc"
|
||||
|
||||
@ -12,8 +12,10 @@
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
CONFIG_TOOLCHAIN_WINDOWS=y
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_UBUNTU is not set
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
@ -65,9 +67,12 @@ CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_MISOC is not set
|
||||
# CONFIG_ARCH_RENESAS is not set
|
||||
# CONFIG_ARCH_RISCV is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_XTENSA is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
@ -107,7 +112,9 @@ CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
# CONFIG_ARCH_CORTEXM23 is not set
|
||||
# CONFIG_ARCH_CORTEXM3 is not set
|
||||
# CONFIG_ARCH_CORTEXM33 is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
# CONFIG_ARCH_CORTEXM7 is not set
|
||||
# CONFIG_ARCH_CORTEXA5 is not set
|
||||
@ -356,6 +363,12 @@ CONFIG_STM32_HAVE_ADC3=y
|
||||
# CONFIG_STM32_HAVE_ADC2_DMA is not set
|
||||
# CONFIG_STM32_HAVE_ADC3_DMA is not set
|
||||
# CONFIG_STM32_HAVE_ADC4_DMA is not set
|
||||
# CONFIG_STM32_HAVE_SDADC1 is not set
|
||||
# CONFIG_STM32_HAVE_SDADC2 is not set
|
||||
# CONFIG_STM32_HAVE_SDADC3 is not set
|
||||
# CONFIG_STM32_HAVE_SDADC1_DMA is not set
|
||||
# CONFIG_STM32_HAVE_SDADC2_DMA is not set
|
||||
# CONFIG_STM32_HAVE_SDADC3_DMA is not set
|
||||
CONFIG_STM32_HAVE_CAN1=y
|
||||
CONFIG_STM32_HAVE_CAN2=y
|
||||
CONFIG_STM32_HAVE_DAC1=y
|
||||
@ -615,6 +628,7 @@ CONFIG_PREALLOC_TIMERS=4
|
||||
#
|
||||
# Tasks and Scheduling
|
||||
#
|
||||
# CONFIG_SPINLOCK is not set
|
||||
# CONFIG_INIT_NONE is not set
|
||||
CONFIG_INIT_ENTRYPOINT=y
|
||||
# CONFIG_INIT_FILEPATH is not set
|
||||
@ -631,6 +645,8 @@ CONFIG_SCHED_WAITPID=y
|
||||
#
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
# CONFIG_PTHREAD_CLEANUP is not set
|
||||
# CONFIG_CANCELLATION_POINTS is not set
|
||||
|
||||
#
|
||||
# Performance Monitoring
|
||||
@ -711,14 +727,14 @@ CONFIG_DEV_NULL=y
|
||||
CONFIG_ARCH_HAVE_I2CRESET=y
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
|
||||
CONFIG_ARCH_HAVE_SPI_BITORDER=y
|
||||
# CONFIG_SPI_SLAVE is not set
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_SPI_CALLBACK is not set
|
||||
# CONFIG_SPI_HWFEATURES is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set
|
||||
# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set
|
||||
CONFIG_ARCH_HAVE_SPI_BITORDER=y
|
||||
# CONFIG_SPI_BITORDER is not set
|
||||
# CONFIG_SPI_CS_DELAY_CONTROL is not set
|
||||
# CONFIG_SPI_DRIVER is not set
|
||||
@ -729,6 +745,7 @@ CONFIG_ARCH_HAVE_SPI_BITORDER=y
|
||||
# Timer Driver Support
|
||||
#
|
||||
# CONFIG_TIMER is not set
|
||||
# CONFIG_ONESHOT is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
@ -818,6 +835,7 @@ CONFIG_USART2_2STOP=0
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_HAVE_USBTRACE is not set
|
||||
# CONFIG_DRIVERS_WIRELESS is not set
|
||||
# CONFIG_DRIVERS_CONTACTLESS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
@ -921,11 +939,28 @@ CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBC_DLLFCN is not set
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCPY is not set
|
||||
# CONFIG_LIBC_ARCH_MEMCMP is not set
|
||||
# CONFIG_LIBC_ARCH_MEMMOVE is not set
|
||||
# CONFIG_LIBC_ARCH_MEMSET is not set
|
||||
# CONFIG_LIBC_ARCH_STRCHR is not set
|
||||
# CONFIG_LIBC_ARCH_STRCMP is not set
|
||||
# CONFIG_LIBC_ARCH_STRCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRNCPY is not set
|
||||
# CONFIG_LIBC_ARCH_STRLEN is not set
|
||||
# CONFIG_LIBC_ARCH_STRNLEN is not set
|
||||
# CONFIG_LIBC_ARCH_BZERO is not set
|
||||
# CONFIG_LIBC_ARCH_ELF is not set
|
||||
# CONFIG_ARMV7M_MEMCPY is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIBC_LONG_LONG=y
|
||||
# CONFIG_LIBC_SCANSET is not set
|
||||
# CONFIG_LIBC_IOCTL_VARIADIC is not set
|
||||
# CONFIG_LIBC_WCHAR is not set
|
||||
# CONFIG_LIBC_LOCALE is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
@ -941,8 +976,12 @@ CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_TIME_EXTENDED is not set
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_MEMCPY_VIK is not set
|
||||
# CONFIG_MEMSET_OPTSPEED is not set
|
||||
CONFIG_ARCH_HAVE_TLS=y
|
||||
# CONFIG_TLS is not set
|
||||
# CONFIG_LIBC_IPv4_ADDRCONV is not set
|
||||
# CONFIG_LIBC_IPv6_ADDRCONV is not set
|
||||
# CONFIG_LIBC_NETDB is not set
|
||||
# CONFIG_NETDB_HOSTFILE is not set
|
||||
|
||||
@ -984,6 +1023,7 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CCTYPE is not set
|
||||
# CONFIG_EXAMPLES_CHAT is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
@ -1057,6 +1097,7 @@ CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
# CONFIG_INTERPRETERS_BAS is not set
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_MICROPYTHON is not set
|
||||
# CONFIG_INTERPRETERS_MINIBASIC is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
@ -1127,6 +1168,7 @@ CONFIG_NSH_DISABLE_LOSMART=y
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MV is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
CONFIG_NSH_DISABLE_PRINTF=y
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
@ -1149,6 +1191,7 @@ CONFIG_NSH_MMCSDMINOR=0
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
# CONFIG_NSH_CMDOPT_DD_STATS is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
|
||||
CONFIG_NSH_PROC_MOUNTPOINT="/proc"
|
||||
@ -1195,6 +1238,8 @@ CONFIG_READLINE_ECHO=y
|
||||
# CONFIG_READLINE_TABCOMPLETION is not set
|
||||
# CONFIG_READLINE_CMD_HISTORY is not set
|
||||
# CONFIG_SYSTEM_SUDOKU is not set
|
||||
# CONFIG_SYSTEM_SYSTEM is not set
|
||||
# CONFIG_SYSTEM_TEE is not set
|
||||
# CONFIG_SYSTEM_UBLOXMODEM is not set
|
||||
# CONFIG_SYSTEM_VI is not set
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
|
||||
Loading…
Reference in New Issue
Block a user