I2C register definitions

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1670 42af7a65-404d-4744-a932-0658087f49c3
2009-03-29 21:43:26 +00:00 · 2009-03-29 21:43:26 +00:00 · 7118d0c7a4
commit 7118d0c7a4
parent 76ef9b9572
1 changed files with 119 additions and 0 deletions
--- a/arch/z80/src/ez80/ez80f91_i2c.h
+++ b/arch/z80/src/ez80/ez80f91_i2c.h
@ -0,0 +1,119 @@
+/************************************************************************************
+ * arch/z80/src/ez80/ez80f91_i2c.h
+ * arch/z80/src/chip/ez80f91_i2c.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_Z80_SRC_EZ80_EZ80F91_I2C_H
+#define __ARCH_Z80_SRC_EZ80_EZ80F91_I2C_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* I2C Registers  ******************************************************************/
+
+/* Provided in ez80f91.h */
+
+/* I2C Register Bit Definitions  ***************************************************/
+
+/* Slave Address Register (SAR) Bit Definitions */
+
+#define I2C_SAR_GCE      (1 << 0)     /* Bit 0: 1=I2C enabled to recognize the General Call Address */
+#define I2C_SAR_SLA_SHIFT 1           /* Bits 1-7: 7-bit address or upper 2 bits in 10-bit mode */
+#define I2C_SAR_SLA_MASK (0x7f << 1)
+
+/* Extended Slave Address Register (XSAR) Bit Definitions */
+/* Bits 0-7: Least significant 8-bits of 10-bit slave address */
+
+/* Data Byte Register (DR) Bit Definitions */
+/* Bits 0-7: I2C byte data */
+
+/* Control (CTL) Register Bit Definitions */
+
+#define I2C_CTL_AAK      (1 << 2) /* Bit 2: 1=Acknowledge */
+#define I2C_CTL_IFLG     (1 << 3) /* Bit 3: 1=I2C interrupt flag is set */
+#define I2C_CTL_STP      (1 << 4) /* Bit 4: 1=Master mode stop-transmit STOP condition on the bus */
+#define I2C_CTL_STA      (1 << 5) /* Bit 5: 1=Master mode start-transmit START condition on the bus */
+#define I2C_CTL_ENAB     (1 << 6) /* Bit 6: 1=I2C bus (SCL/SDA) is enabled */
+#define I2C_CTL_IEN      (1 << 7) /* Bit 7: 1=I2C interrupt is enabled */
+
+/* Status Register (SR) Bit Definitions */
+
+#define I2C_SR_SHIFT     3        /* Bits 3-7: 5-bit status code */
+#define I2C_SR_MASK      (0x1c << I2C_SR_SHIFT)
+
+/* Clock Control Register (CCR) Bit Definitions */
+
+#define I2C_CCR_NSHIFT   0        /* Bits 0-2: I2C clock divider exponent */
+#define I2C_CCR_NMASK    (0x07 << I2C_CCR_NSHIFT)
+#define I2C_CCR_MSHIFT   3        /* Bits 3-6: I2C clock divider scalar value */
+#define I2C_CCR_NMASK    (0x0f << I2C_CCR_MSHIFT)
+
+/* Software Reset Register (SRR) Bit Definitions */
+/* Writing any value to this register performs a software reset of the I2C module */
+
+/************************************************************************************
+ * Public Types
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+#ifdef __cplusplus
+#define EXTERN extern "C"
+extern "C" {
+#else
+#define EXTERN extern
+#endif /* __cplusplus */
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+#undef EXTERN
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+#endif /* __ASSEMBLY__ */
+
+#endif  /* __ARCH_Z80_SRC_EZ80_EZ80F91_I2C_H */