sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

update README files and comments

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3084 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-11-06 19:53:44 +00:00
parent e8cb00514c
commit 718d9c3f81
2 changed files with 45 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
configs/olimex-lpc1766stk/README.txt
View File

@ -248,11 +248,44 @@ LEDs
- configs/olimex-lpc1766stk/src/up_leds.c - LED control logic.
The LPC1766-STK has [tbd] LEDs...
If CONFIG_ARCH_LEDS is defined, these LEDs will be controlled as follows for
NuttX debug functionality (where NC means "No Change").
The LPC1766-STK has two LEDs. If CONFIG_ARCH_LEDS is defined, these LEDs will
be controlled as follows for NuttX debug functionality (where NC means "No Change").
Basically,
[To be provided]
LED1:
- OFF means that the OS is still initializing. Initialization is very fast so
if you see this at all, it probably means that the system is hanging up
somewhere in the initialization phases.
- ON means that the OS completed initialization.
LED2:
- ON/OFF toggles means that various events are happening.
- GLowing: LED2 is turned on and off on every interrupt so even timer interrupts
should cause LED2 to glow faintly in the normal case.
- Flashing. If the LED2 is flashing at about 1Hz, that means that a crash
has occurred. If CONFIG_ARCH_STACKDUMP=y, you will get some diagnostic
information on the console to help debug what happened.
Will
LED1 LED2 Meaning
----- -------- --------------------------------------------------------------------
OFF OFF Still initializing and there is no interrupt activity.
Initialization is very fast so if you see this, it probably means
that the system is hung up somewhere in the initialization phases.
OFF Glowing Still initializing (see above) but taking interrupts.
OFF ON This would mean that (1) initialization did not complete but the
software is hung, perhaps in an infinite loop, somewhere inside
of an interrupt handler.
OFF Flashing Ooops! We crashed before finishing initialization.
ON OFF The system has completed initialization, but is apparently not taking
any interrupts.
ON Glowing This is the normal healthy state: The OS successfully initialized
and is taking interrupts.
ON ON This would mean that (1) the OS complete initialization, but (2)
the software is hung, perhaps in an infinite loop, somewhere inside
of a signal or interrupt handler.
ON Flashing Ooops! We crashed sometime after initialization.
Olimex LPC1766-STK Configuration Options
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

16
configs/olimex-lpc1766stk/include/board.h
View File

@ -125,14 +125,14 @@
/* LED definitions ******************************************************************/
/* LED1 LED2 */
#define LED_STARTED 0 /* OFF OFF */
#define LED_HEAPALLOCATE 0 /* OFF OFF */
#define LED_IRQSENABLED 0 /* OFF OFF */
#define LED_STACKCREATED 1 /* ON OFF */
#define LED_INIRQ 2 /* NC ON */
#define LED_SIGNAL 2 /* NC ON */
#define LED_ASSERTION 2 /* NC ON */
#define LED_PANIC 2 /* NC ON (flashing) */
#define LED_STARTED 0 /* OFF OFF = Still initializing */
#define LED_HEAPALLOCATE 0 /* OFF OFF = Still initializing */
#define LED_IRQSENABLED 0 /* OFF OFF = Still initializing */
#define LED_STACKCREATED 1 /* ON OFF = Initialization complete */
#define LED_INIRQ 2 /* NC ON = In an interrupt handler */
#define LED_SIGNAL 2 /* NC ON = In a signal handler */
#define LED_ASSERTION 2 /* NC ON = In an assertion */
#define LED_PANIC 2 /* NC ON = Oops! We crashed. (flashing) */
/* Alternate pin selections *********************************************************/