Update README
This commit is contained in:
parent
e568253eb3
commit
726ad7640e
@ -57,7 +57,8 @@ Setup and Programming Flash
|
||||
===========================
|
||||
|
||||
I use a USB cable to power and program it. And I use a USB/Serial
|
||||
connected to pins PA9 and PA10 for the serial console.
|
||||
connected to pins PA9 and PA10 for the serial console (See the section
|
||||
"UARTs" below).
|
||||
|
||||
FLASH may be programmed:
|
||||
|
||||
@ -101,8 +102,8 @@ UARTs
|
||||
=====
|
||||
|
||||
On the STM32F429I-DISCO board, because of pin mappings to support the
|
||||
onboard SDRAM and LCD, the only UARTs that has both RX and TX pins
|
||||
avilalbe are USART1 and UART5. Other USARTS could be used for RX or TX
|
||||
onboard SDRAM and LCD, the only UARTs that have both RX and TX pins
|
||||
available are USART1 and UART5. Other USARTS could be used for RX or TX
|
||||
only, or they could be used for full-duplex if the other pin functions
|
||||
aren't being used (i.e. LCD or SDRAM).
|
||||
|
||||
@ -110,38 +111,38 @@ UART/USART PINS
|
||||
---------------
|
||||
|
||||
USART1
|
||||
CK PA8
|
||||
CK PA8*
|
||||
CTS PA11*
|
||||
RTS PA12*
|
||||
RX PA10*, PB7*
|
||||
TX PA9*, PB6*
|
||||
RX PA10, PB7
|
||||
TX PA9, PB6*
|
||||
USART2
|
||||
CK PA4*, PD7
|
||||
CTS PA0*, PD3
|
||||
RTS PA1, PD4*
|
||||
RX PA3, PD6
|
||||
TX PA2, PD5*
|
||||
CTS PA0*, PD3*
|
||||
RTS PA1*, PD4
|
||||
RX PA3*, PD6*
|
||||
TX PA2*, PD5
|
||||
USART3
|
||||
CK PB12, PC12*, PD10
|
||||
CTS PB13, PD11
|
||||
RTS PB14, PD12*
|
||||
RX PB11, PC11, PD9
|
||||
TX PB10*, PC10*, PD8
|
||||
CK PB12*, PC12, PD10*
|
||||
CTS PB13*, PD11*
|
||||
RTS PB14*, PD12*
|
||||
RX PB11*, PC11, PD9*
|
||||
TX PB10*, PC10*, PD8*
|
||||
UART4
|
||||
RX PA1, PC11
|
||||
RX PA1*, PC11
|
||||
TX PA0*, PC10*
|
||||
UART5
|
||||
RX PD2
|
||||
TX PC12*
|
||||
TX PC12
|
||||
USART6
|
||||
CK PC8, PG7*
|
||||
CTS PG13*, PG15*
|
||||
RTS PG12*, PG8*
|
||||
RX PC7*, PG9*
|
||||
TX PC6, PG14*
|
||||
RX PC7*, PG9
|
||||
TX PC6*, PG14*
|
||||
UART7
|
||||
RX PE7*,PF6*
|
||||
TX PE8*,PF7*
|
||||
RX PE7*, PF6
|
||||
TX PE8*, PF7*
|
||||
|
||||
* Indicates pins that have other on-board functions and should be used only
|
||||
with care (See table 6 in the STM32F429I-DISCO User Guide for a list of free
|
||||
@ -203,7 +204,7 @@ TIM14
|
||||
|
||||
* Indicates pins that have other on-board functions and should be used only
|
||||
with care (See table 5 in the STM32F429I-DISCO User Guide). The rest are
|
||||
free I/O pins.
|
||||
free I/O pins (This need to be updated. They are incorrect!)
|
||||
** Port H pins are not supported by the MCU
|
||||
|
||||
FPU
|
||||
|
Loading…
Reference in New Issue
Block a user