net/netdev: Add upper half of netdev to simplify driver logic

Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This commit is contained in:
Zhe Weng 2023-01-17 11:39:33 +08:00 committed by Xiang Xiao
parent 4cae98674d
commit 72b77d36e2
3 changed files with 1104 additions and 0 deletions

View File

@ -24,6 +24,10 @@ ifeq ($(CONFIG_NET),y)
# Include network interface drivers
ifeq ($(CONFIG_MM_IOB),y)
CSRCS += netdev_upperhalf.c
endif
ifeq ($(CONFIG_NET_LOOPBACK),y)
CSRCS += loopback.c
endif

View File

@ -0,0 +1,801 @@
/****************************************************************************
* drivers/net/netdev_upperhalf.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <errno.h>
#include <stdbool.h>
#include <string.h>
#include <nuttx/kmalloc.h>
#include <nuttx/mm/iob.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev_lowerhalf.h>
#include <nuttx/net/pkt.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define NETDEV_TX_CONTINUE 1 /* Return value for devif_poll */
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure describes the state of the upper half driver */
struct netdev_upperhalf_s
{
FAR struct netdev_lowerhalf_s *lower;
struct work_s work; /* Deferring poll work to the work queue */
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: netpkt_get
*
* Description:
* Wraps the d_iob of dev to a netpkt.
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
static FAR netpkt_t *netpkt_get(FAR struct net_driver_s *dev,
enum netpkt_type_e type)
{
FAR struct netdev_upperhalf_s *upper;
FAR netpkt_t *pkt;
DEBUGASSERT(dev && dev->d_iob);
upper = (FAR struct netdev_upperhalf_s *)dev->d_private;
pkt = dev->d_iob;
netdev_iob_clear(dev);
/* Do not limit quota here (simply relay iob instead of dropping), most
* cases will be limited by netdev_upper_can_tx and seldom reaches here.
*/
if (upper->lower->quota[type]-- <= 0)
{
nwarn("WARNING: Allowing temperarily exceeding quota of %s.\n",
dev->d_ifname);
}
return pkt;
}
/****************************************************************************
* Name: netpkt_put
*
* Description:
* Relay IOB to dev.
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
static void netpkt_put(FAR struct net_driver_s *dev, FAR netpkt_t *pkt,
enum netpkt_type_e type)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
DEBUGASSERT(dev && pkt);
/* TODO: Using netdev_iob_release instead of netdev_iob_replace now,
* because netdev_iob_replace sets d_len = L3_LEN and d_buf,
* but we don't want these changes.
*/
upper->lower->quota[type]++;
netdev_iob_release(dev);
dev->d_iob = pkt;
dev->d_len = netpkt_getdatalen(upper->lower, pkt);
}
/****************************************************************************
* Name: netdev_upper_alloc
*
* Description:
* Get the upper half of lower half structure, create one if not present.
*
****************************************************************************/
static FAR struct netdev_upperhalf_s *
netdev_upper_alloc(FAR struct netdev_lowerhalf_s *dev)
{
/* Allocate the upper-half data structure */
FAR struct netdev_upperhalf_s *upper;
DEBUGASSERT(dev != NULL && dev->netdev.d_private == NULL);
upper = kmm_zalloc(sizeof(struct netdev_upperhalf_s));
if (upper == NULL)
{
nerr("ERROR: Allocation failed\n");
return NULL;
}
upper->lower = dev;
dev->netdev.d_private = upper;
return upper;
}
/****************************************************************************
* Name: netdev_upper_can_tx
*
* Description:
* Check if we allow tx on this device.
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
static inline bool netdev_upper_can_tx(FAR struct netdev_upperhalf_s *upper)
{
return upper->lower->quota[NETPKT_TX] > 0;
}
/****************************************************************************
* Name: netdev_upper_txpoll
*
* Description:
* The transmitter is available, check if the network has any outgoing
* packets ready to send. This is a callback from devif_poll().
* devif_poll() may be called:
*
* 1. When the preceding TX packet send is complete
* 2. When the preceding TX packet send times out and the interface is
* reset
* 3. During normal TX polling
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
*
* Returned Value:
* Negated errno value - Error number that occurs.
* OK - Driver can send more, continue the poll.
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
static int netdev_upper_txpoll(FAR struct net_driver_s *dev)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
FAR struct netdev_lowerhalf_s *lower = upper->lower;
FAR netpkt_t *pkt;
int ret;
DEBUGASSERT(dev->d_len > 0);
NETDEV_TXPACKETS(dev);
#ifdef CONFIG_NET_PKT
/* When packet sockets are enabled, feed the tx frame into it */
pkt_input(dev);
#endif
pkt = netpkt_get(dev, NETPKT_TX);
ret = lower->ops->transmit(lower, pkt);
if (ret != OK)
{
/* Stop polling on any error
* REVISIT: maybe store the pkt in upper half and retry later?
*/
NETDEV_TXERRORS(dev);
netpkt_put(dev, pkt, NETPKT_TX);
return ret;
}
return NETDEV_TX_CONTINUE;
}
/****************************************************************************
* Name: netdev_upper_txavail_work
*
* Description:
* Perform an out-of-cycle tx poll on the worker thread.
*
* Input Parameters:
* upper - Reference to the upper half driver structure
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
static void netdev_upper_txavail_work(FAR struct netdev_upperhalf_s *upper)
{
FAR struct net_driver_s *dev = &upper->lower->netdev;
/* Ignore the notification if the interface is not yet up */
if (IFF_IS_UP(dev->d_flags))
{
DEBUGASSERT(dev->d_buf == NULL); /* Make sure: IOB only. */
while (netdev_upper_can_tx(upper) &&
devif_poll(dev, netdev_upper_txpoll) == NETDEV_TX_CONTINUE);
}
}
/****************************************************************************
* Function: netdev_upper_rxpoll_work
*
* Description:
* Try to receive packets from device and pass packets into IP
* stack and send packets which is from IP stack if necessary.
*
* Input Parameters:
* upper - Reference to the upper half driver structure
*
* Assumptions:
* Called with the network locked.
*
****************************************************************************/
static void netdev_upper_rxpoll_work(FAR struct netdev_upperhalf_s *upper)
{
FAR struct netdev_lowerhalf_s *lower = upper->lower;
FAR struct net_driver_s *dev = &lower->netdev;
FAR struct eth_hdr_s *eth_hdr;
FAR netpkt_t *pkt;
/* Loop while receive() successfully retrieves valid Ethernet frames. */
while ((pkt = lower->ops->receive(lower)) != NULL)
{
NETDEV_RXPACKETS(dev);
if (!IFF_IS_UP(dev->d_flags))
{
/* Interface down, drop frame */
NETDEV_RXDROPPED(dev);
netpkt_free(lower, pkt, NETPKT_RX);
continue;
}
netpkt_put(dev, pkt, NETPKT_RX);
#ifdef CONFIG_NET_PKT
/* When packet sockets are enabled, feed the frame into the tap */
pkt_input(dev);
#endif
/* TODO: Support other ll types. */
DEBUGASSERT(dev->d_lltype == NET_LL_ETHERNET ||
dev->d_lltype == NET_LL_IEEE80211);
eth_hdr = (FAR struct eth_hdr_s *)NETLLBUF;
/* Check if this is an 802.1Q VLAN tagged packet */
if (eth_hdr->type == HTONS(TPID_8021QVLAN))
{
/* Need to remove the 4 octet VLAN Tag, by moving src and dest
* addresses 4 octets to the right, and then read the actual
* ethertype. The VLAN ID and priority fields are currently
* ignored.
*/
memmove((FAR uint8_t *)eth_hdr + 4, eth_hdr,
offsetof(struct eth_hdr_s, type));
dev->d_iob = iob_trimhead(dev->d_iob, 4);
dev->d_len -= 4;
eth_hdr = (FAR struct eth_hdr_s *)NETLLBUF;
}
/* We only accept IP packets of the configured type and ARP packets */
#ifdef CONFIG_NET_IPv4
if (eth_hdr->type == HTONS(ETHTYPE_IP))
{
ninfo("IPv4 frame\n");
NETDEV_RXIPV4(dev);
/* Receive an IPv4 packet from the network device */
ipv4_input(dev);
}
else
#endif
#ifdef CONFIG_NET_IPv6
if (eth_hdr->type == HTONS(ETHTYPE_IP6))
{
ninfo("IPv6 frame\n");
NETDEV_RXIPV6(dev);
/* Give the IPv6 packet to the network layer */
ipv6_input(dev);
}
else
#endif
#ifdef CONFIG_NET_ARP
if (eth_hdr->type == HTONS(ETHTYPE_ARP))
{
ninfo("ARP frame\n");
NETDEV_RXARP(dev);
/* Handle ARP packet */
arp_input(dev);
}
else
#endif
{
ninfo("INFO: Dropped, Unknown type: %04x\n", eth_hdr->type);
NETDEV_RXDROPPED(dev);
dev->d_len = 0;
}
/* If the above function invocation resulted in data
* that should be sent out on the network,
* the field d_len will set to a value > 0.
*/
if (dev->d_len > 0)
{
/* And send the packet */
netdev_upper_txpoll(dev);
}
}
}
/****************************************************************************
* Name: netdev_upper_txavail_work
*
* Description:
* Perform an out-of-cycle poll on a dedicated thread or the worker thread.
*
* Input Parameters:
* arg - Reference to the upper half driver structure (cast to void *)
*
* TODO:
* Support working in a dedicated thread.
*
****************************************************************************/
static void netdev_upper_work(FAR void *arg)
{
FAR struct netdev_upperhalf_s *upper = arg;
/* RX may release quota and driver buffer, so do RX first. */
net_lock();
netdev_upper_rxpoll_work(upper);
netdev_upper_txavail_work(upper);
net_unlock();
}
/****************************************************************************
* Name: netdev_upper_queue_work
*
* Description:
* Called when there is any work to do.
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
*
****************************************************************************/
static inline void netdev_upper_queue_work(FAR struct net_driver_s *dev)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
/* TODO: support trigger thread. */
if (work_available(&upper->work))
{
/* Schedule to serialize the poll on the worker thread. */
work_queue(LPWORK, &upper->work, netdev_upper_work, upper, 0);
}
}
/****************************************************************************
* Name: netdev_upper_txavail
*
* Description:
* Called when new TX data is available.
*
* Input Parameters:
* dev - Reference to the NuttX driver state structure
*
****************************************************************************/
static int netdev_upper_txavail(FAR struct net_driver_s *dev)
{
netdev_upper_queue_work(dev);
return OK;
}
/****************************************************************************
* Name: netdev_upper_ifup/ifdown/addmac/rmmac/ioctl
*
* Description:
* Called by net stack and relayed to lower half driver.
*
****************************************************************************/
static int netdev_upper_ifup(FAR struct net_driver_s *dev)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
/* TODO: bring up a dedicated thread for work? */
if (upper->lower->ops->ifup)
{
return upper->lower->ops->ifup(upper->lower);
}
return -ENOSYS;
}
static int netdev_upper_ifdown(FAR struct net_driver_s *dev)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
/* TODO: Support dedicated thread? */
work_cancel(LPWORK, &upper->work);
if (upper->lower->ops->ifdown)
{
return upper->lower->ops->ifdown(upper->lower);
}
return -ENOSYS;
}
#ifdef CONFIG_NET_MCASTGROUP
static int netdev_upper_addmac(FAR struct net_driver_s *dev,
FAR const uint8_t *mac)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
if (upper->lower->ops->addmac)
{
return upper->lower->ops->addmac(upper->lower, mac);
}
return -ENOSYS;
}
#endif
#ifdef CONFIG_NET_MCASTGROUP
static int netdev_upper_rmmac(FAR struct net_driver_s *dev,
FAR const uint8_t *mac)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
if (upper->lower->ops->rmmac)
{
return upper->lower->ops->rmmac(upper->lower, mac);
}
return -ENOSYS;
}
#endif
#ifdef CONFIG_NETDEV_IOCTL
static int netdev_upper_ioctl(FAR struct net_driver_s *dev, int cmd,
unsigned long arg)
{
FAR struct netdev_upperhalf_s *upper = dev->d_private;
if (upper->lower->ops->ioctl)
{
return upper->lower->ops->ioctl(upper->lower, cmd, arg);
}
return -ENOTTY;
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: netdev_lower_register
*
* Description:
* Register a network device driver and assign a name to it so that it can
* be found in subsequent network ioctl operations on the device.
*
* Input Parameters:
* dev - The lower half device driver structure to be registered.
* lltype - Link level protocol used by the driver (Ethernet, SLIP, TUN,
* ...
*
* Returned Value:
* 0:Success; negated errno on failure.
*
****************************************************************************/
int netdev_lower_register(FAR struct netdev_lowerhalf_s *dev,
enum net_lltype_e lltype)
{
FAR struct netdev_upperhalf_s *upper;
int ret;
if (dev == NULL || dev->ops == NULL ||
dev->ops->transmit == NULL || dev->ops->receive == NULL)
{
return -EINVAL;
}
if ((upper = netdev_upper_alloc(dev)) == NULL)
{
return -ENOMEM;
}
dev->netdev.d_ifup = netdev_upper_ifup;
dev->netdev.d_ifdown = netdev_upper_ifdown;
dev->netdev.d_txavail = netdev_upper_txavail;
#ifdef CONFIG_NET_MCASTGROUP
dev->netdev.d_addmac = netdev_upper_addmac;
dev->netdev.d_rmmac = netdev_upper_rmmac;
#endif
#ifdef CONFIG_NETDEV_IOCTL
dev->netdev.d_ioctl = netdev_upper_ioctl;
#endif
dev->netdev.d_private = upper;
ret = netdev_register(&dev->netdev, lltype);
if (ret < 0)
{
kmm_free(upper);
dev->netdev.d_private = NULL;
}
return ret;
}
/****************************************************************************
* Name: netdev_lower_unregister
*
* Description:
* Unregister a network device driver.
*
* Input Parameters:
* dev - The lower half device driver structure to un-register
*
* Returned Value:
* 0:Success; negated errno on failure
*
****************************************************************************/
int netdev_lower_unregister(FAR struct netdev_lowerhalf_s *dev)
{
FAR struct netdev_upperhalf_s *upper;
int ret;
if (dev == NULL || dev->netdev.d_private == NULL)
{
return -EINVAL;
}
upper = (FAR struct netdev_upperhalf_s *)dev->netdev.d_private;
ret = netdev_unregister(&dev->netdev);
if (ret < 0)
{
return ret;
}
kmm_free(upper);
dev->netdev.d_private = NULL;
return OK;
}
/****************************************************************************
* Name: netdev_lower_rxready
*
* Description:
* Notifies the networking layer about an RX packet is ready to read.
*
* Input Parameters:
* dev - The lower half device driver structure
*
****************************************************************************/
void netdev_lower_rxready(FAR struct netdev_lowerhalf_s *dev)
{
netdev_upper_queue_work(&dev->netdev);
}
/****************************************************************************
* Name: netdev_lower_txdone
*
* Description:
* Notifies the networking layer about a TX packet is sent.
*
* Input Parameters:
* dev - The lower half device driver structure
*
****************************************************************************/
void netdev_lower_txdone(FAR struct netdev_lowerhalf_s *dev)
{
NETDEV_TXDONE(&dev->netdev);
netdev_upper_queue_work(&dev->netdev);
}
/****************************************************************************
* Name: netpkt_alloc
*
* Description:
* Allocate a netpkt structure.
*
* Input Parameters:
* dev - The lower half device driver structure
* type - Whether used for TX or RX
*
* Returned Value:
* Pointer to the packet, NULL on failure
*
****************************************************************************/
FAR netpkt_t *netpkt_alloc(FAR struct netdev_lowerhalf_s *dev,
enum netpkt_type_e type)
{
FAR netpkt_t *pkt;
if (dev->quota[type] <= 0)
{
return NULL;
}
pkt = iob_tryalloc(false);
if (pkt == NULL)
{
return NULL;
}
net_lock(); /* REVISIT: Do we have better solution? */
dev->quota[type]--;
net_unlock();
iob_reserve(pkt, CONFIG_NET_LL_GUARDSIZE);
return pkt;
}
/****************************************************************************
* Name: netpkt_free
*
* Description:
* Release a netpkt structure.
*
* Input Parameters:
* dev - The lower half device driver structure
* pkt - The packet to release
* type - Whether used for TX or RX
*
****************************************************************************/
void netpkt_free(FAR struct netdev_lowerhalf_s *dev, FAR netpkt_t *pkt,
enum netpkt_type_e type)
{
net_lock(); /* REVISIT: Do we have better solution? */
dev->quota[type]++;
net_unlock();
iob_free_chain(pkt);
}
/****************************************************************************
* Name: netpkt_copyin
*
* Description:
* Copy 'len' bytes of data from a buffer into the netpkt, starting at
* 'offset' of netpkt.
*
* Input Parameters:
* dev - The lower half device driver structure
* pkt - The net packet
* src - The source buffer
* len - How many bytes to copy
* offset - The offset of netpkt to put the data
*
* Returned Value:
* 0:Success; negated errno on failure
*
****************************************************************************/
int netpkt_copyin(FAR struct netdev_lowerhalf_s *dev, FAR netpkt_t *pkt,
FAR const uint8_t *src, unsigned int len, int offset)
{
return iob_trycopyin(pkt, src, len,
offset - NET_LL_HDRLEN(&dev->netdev), false);
}
/****************************************************************************
* Name: netpkt_copyout
*
* Description:
* Copy 'len' bytes of data from netpkt into a buffer, starting at
* 'offset' of netpkt.
*
* Input Parameters:
* dev - The lower half device driver structure
* dest - The destination buffer
* pkt - The net packet
* len - How many bytes to copy
* offset - The offset of netpkt to get the data
*
* Returned Value:
* 0:Success; negated errno on failure
*
****************************************************************************/
int netpkt_copyout(FAR struct netdev_lowerhalf_s *dev, FAR uint8_t *dest,
FAR const netpkt_t *pkt, unsigned int len, int offset)
{
return iob_copyout(dest, pkt, len, offset - NET_LL_HDRLEN(&dev->netdev));
}
/****************************************************************************
* Name: netpkt_getdatalen
*
* Description:
* Get the length of data in netpkt.
*
* Input Parameters:
* dev - The lower half device driver structure
* pkt - The net packet
*
* Returned Value:
* The length of data in netpkt.
*
****************************************************************************/
unsigned int netpkt_getdatalen(FAR struct netdev_lowerhalf_s *dev,
FAR netpkt_t *pkt)
{
return pkt->io_pktlen + NET_LL_HDRLEN(&dev->netdev);
}

View File

@ -0,0 +1,299 @@
/****************************************************************************
* include/nuttx/net/netdev_lowerhalf.h
* Defines architecture-specific device driver interfaces to the NuttX
* network.
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_NET_NETDEV_LOWERHALF_H
#define __INCLUDE_NUTTX_NET_NETDEV_LOWERHALF_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <net/if.h>
#include <netinet/in.h>
#include <nuttx/net/ip.h>
#include <nuttx/net/net.h>
#include <nuttx/net/netdev.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* | <-------------- NETPKT_BUFLEN ---------------> |
* +---------------------+-------------------+------+ +-------------+
* | reserved for driver | data | free | ---> | next netpkt |
* +---------------------+-------------------+------+ +-------------+
* | | <--- datalen ---> |
* ^base ^data
*/
#define NETPKT_BUFLEN CONFIG_IOB_BUFSIZE
/****************************************************************************
* Public Types
****************************************************************************/
/* We use IOB as our buffer now, we may change to some other structure when
* needed, so define a type netpkt_t for lower half.
* TODO: Provide interface of its queue, maybe a simple wrapper of iob_queue.
*/
typedef struct iob_s netpkt_t;
enum netpkt_type_e
{
NETPKT_TX,
NETPKT_RX,
NETPKT_TYPENUM
};
/* This structure is the generic form of state structure used by lower half
* netdev driver. This state structure is passed to the netdev driver when
* the driver is initialized. Then, on subsequent callbacks into the lower
* half netdev logic, this structure is provided so that the netdev logic can
* maintain state information.
*
* Normally that netdev logic will have its own, custom state structure
* that is simply cast to struct netdev_lowerhalf_s. In order to perform such
* casts, the initial fields of the custom state structure match the initial
* fields of the following generic netdev state structure.
*/
struct netdev_ops_s;
struct netdev_lowerhalf_s
{
FAR const struct netdev_ops_s *ops;
int quota[NETPKT_TYPENUM]; /* Max # of buffer held by driver */
/* The structure used by net stack.
* Note: Do not change its fields unless you know what you are doing.
*
* Fields that lowerhalf should never touch (used by upper half):
* d_ifup, d_ifdown, d_txavail, d_addmac, d_rmmac, d_ioctl, d_private
*/
struct net_driver_s netdev;
};
/* This structure is a set a callback functions used to call from the upper-
* half, generic netdev driver into lower-half, platform-specific logic that
* supports the low-level functionality.
*/
struct netdev_ops_s
{
int (*ifup)(FAR struct netdev_lowerhalf_s *dev);
int (*ifdown)(FAR struct netdev_lowerhalf_s *dev);
/* transmit - Try to send a packet, non-blocking, own the netpkt and
* need to call netpkt_free to free it sometime later.
* Returned Value:
* OK for successfully sent the packet, driver can take pkt to its
* own queue and return OK (remember to free it later).
* Negated errno value for failure, will stop current sending, the pkt
* will be recycled by upper half.
*/
int (*transmit)(FAR struct netdev_lowerhalf_s *dev, FAR netpkt_t *pkt);
/* receive - Try to receive a packet, non-blocking
* Returned Value:
* A netpkt contains the packet, or NULL if no more packets.
*/
FAR netpkt_t *(*receive)(FAR struct netdev_lowerhalf_s *dev);
#ifdef CONFIG_NET_MCASTGROUP
int (*addmac)(FAR struct netdev_lowerhalf_s *dev, FAR const uint8_t *mac);
int (*rmmac)(FAR struct netdev_lowerhalf_s *dev, FAR const uint8_t *mac);
#endif
#ifdef CONFIG_NETDEV_IOCTL
int (*ioctl)(FAR struct netdev_lowerhalf_s *dev, int cmd,
unsigned long arg);
#endif
};
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: netdev_lower_register
*
* Description:
* Register a network device driver and assign a name to it so that it can
* be found in subsequent network ioctl operations on the device.
*
* Input Parameters:
* dev - The lower half device driver structure to be registered.
* lltype - Link level protocol used by the driver (Ethernet, SLIP, TUN,
* ...
*
* Returned Value:
* 0:Success; negated errno on failure.
*
****************************************************************************/
int netdev_lower_register(FAR struct netdev_lowerhalf_s *dev,
enum net_lltype_e lltype);
/****************************************************************************
* Name: netdev_lower_unregister
*
* Description:
* Unregister a network device driver.
*
* Input Parameters:
* dev - The lower half device driver structure to un-register
*
* Returned Value:
* 0:Success; negated errno on failure
*
****************************************************************************/
int netdev_lower_unregister(FAR struct netdev_lowerhalf_s *dev);
/****************************************************************************
* Name: netdev_lower_rxready
*
* Description:
* Notifies the networking layer about an RX packet is ready to read.
*
* Input Parameters:
* dev - The lower half device driver structure
*
****************************************************************************/
void netdev_lower_rxready(FAR struct netdev_lowerhalf_s *dev);
/****************************************************************************
* Name: netdev_lower_txdone
*
* Description:
* Notifies the networking layer about a TX packet is sent.
*
* Input Parameters:
* dev - The lower half device driver structure
*
****************************************************************************/
void netdev_lower_txdone(FAR struct netdev_lowerhalf_s *dev);
/****************************************************************************
* Name: netpkt_alloc
*
* Description:
* Allocate a netpkt structure.
*
* Input Parameters:
* dev - The lower half device driver structure
* type - Whether used for TX or RX
*
* Returned Value:
* Pointer to the packet, NULL on failure
*
****************************************************************************/
FAR netpkt_t *netpkt_alloc(FAR struct netdev_lowerhalf_s *dev,
enum netpkt_type_e type);
/****************************************************************************
* Name: netpkt_free
*
* Description:
* Release a netpkt structure.
*
* Input Parameters:
* dev - The lower half device driver structure
* pkt - The packet to release
* type - Whether used for TX or RX
*
****************************************************************************/
void netpkt_free(FAR struct netdev_lowerhalf_s *dev, FAR netpkt_t *pkt,
enum netpkt_type_e type);
/****************************************************************************
* Name: netpkt_copyin
*
* Description:
* Copy 'len' bytes of data from a buffer into the netpkt, starting at
* 'offset' of netpkt.
*
* Input Parameters:
* dev - The lower half device driver structure
* pkt - The net packet
* src - The source buffer
* len - How many bytes to copy
* offset - The offset of netpkt to put the data
*
* Returned Value:
* 0:Success; negated errno on failure
*
****************************************************************************/
int netpkt_copyin(FAR struct netdev_lowerhalf_s *dev, FAR netpkt_t *pkt,
FAR const uint8_t *src, unsigned int len, int offset);
/****************************************************************************
* Name: netpkt_copyout
*
* Description:
* Copy 'len' bytes of data from netpkt into a buffer, starting at
* 'offset' of netpkt.
*
* Input Parameters:
* dev - The lower half device driver structure
* dest - The destination buffer
* pkt - The net packet
* len - How many bytes to copy
* offset - The offset of netpkt to get the data
*
* Returned Value:
* 0:Success; negated errno on failure
*
****************************************************************************/
int netpkt_copyout(FAR struct netdev_lowerhalf_s *dev, FAR uint8_t *dest,
FAR const netpkt_t *pkt, unsigned int len, int offset);
/****************************************************************************
* Name: netpkt_getdatalen
*
* Description:
* Get the length of data in netpkt.
*
* Input Parameters:
* dev - The lower half device driver structure
* pkt - The net packet
*
* Returned Value:
* The length of data in netpkt.
*
****************************************************************************/
unsigned int netpkt_getdatalen(FAR struct netdev_lowerhalf_s *dev,
FAR netpkt_t *pkt);
#endif /* __INCLUDE_NUTTX_NET_NETDEV_LOWERHALF_H */