SAMA5: Add a missing endif in a Make.defs that recently added; Several other cosmetic changes

COPYING

@@ -12,7 +12,7 @@ NuttX
 License for NuttX in general (authorship of individual files may vary):
 /*************************************************************************
  * 
- *   Copyright (C) 2007-2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007-2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -241,6 +241,6 @@ drivers/video/ov2640
   from other projects with conflicting licenses:  Linux and ArduCAM.  Those
   both have GPL licenses.  I am not sure if it is proper or not to lift the
   content of those tables and still retain this BSD license.  I am guessing
-  so, but I am not copyright attorney so you should use this driver in
+  so, but I am not a copyright attorney so you should use this driver in
   products at your own risk.
  

TODO

@@ -34,6 +34,7 @@ nuttx/
   (0)  ARM/LPC43x (arch/arm/src/lpc43xx/)
   (3)  ARM/STR71x (arch/arm/src/str71x/)
   (3)  ARM/LM3S6918 (arch/arm/src/lm/)
+  (x)  ARM/SAMA5D3 ((arch/arm/src/sama5/)
   (5)  ARM/STM32 (arch/arm/src/stm32/)
   (3)  AVR (arch/avr)
   (0)  Intel x86 (arch/x86)
@@ -1792,6 +1793,11 @@ o ARM/LM3S6918 (arch/arm/src/lm/)
                likely cause is probably a stack overflow, not a hard sofware bug.
   Priority:    Probably Low
 
+o ARM/SAMA5D3 ((arch/arm/src/sama5/)
+  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  Issues related to the SAMA5D3 port are in configs/sama5d3x-ek/README.txt.
+
 o ARM/STM32 (arch/arm/src/stm32/)
   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 

configs/sama5d3x-ek/README.txt

@@ -3140,7 +3140,10 @@ To-Do List
      Mem:     268430800       6864  268423936  268423936
      nsh>
 
-   This needs some further investigation and a little TLC.
+   Disabling debug and forcing either of the two debug outputs above also
+   eliminates the problem.  Replacing the debug output with a delay does
+   not solve the problem.  This needs some further investigation and a
+   little TLC.
 
 5) HSCMI TX DMA support is currently commented out.
 

configs/sama5d3x-ek/demo/Make.defs

@@ -40,21 +40,27 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
 else
   LDSCRIPT = nor-isram.ld
 endif
+endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif

configs/sama5d3x-ek/hello/Make.defs

@@ -40,9 +40,11 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
@@ -50,12 +52,15 @@ else
   LDSCRIPT = nor-isram.ld
 endif
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif

configs/sama5d3x-ek/norboot/Make.defs

@@ -40,9 +40,11 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
@@ -50,12 +52,15 @@ else
   LDSCRIPT = nor-isram.ld
 endif
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif

configs/sama5d3x-ek/nsh/Make.defs

@@ -40,9 +40,11 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
@@ -50,12 +52,15 @@ else
   LDSCRIPT = nor-isram.ld
 endif
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif

configs/sama5d3x-ek/nx/Make.defs

@@ -40,9 +40,11 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
@@ -50,12 +52,15 @@ else
   LDSCRIPT = nor-isram.ld
 endif
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif

configs/sama5d3x-ek/nxwm/Make.defs

@@ -1,7 +1,7 @@
 ############################################################################
 # configs/sama5d3x-ek/nxwm/Make.defs
 #
-#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Copyright (C) 2013-2014 Gregory Nutt. All rights reserved.
 #   Author: Gregory Nutt <gnutt@nuttx.org>
 #
 # Redistribution and use in source and binary forms, with or without
@@ -40,9 +40,11 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
@@ -50,12 +52,15 @@ else
   LDSCRIPT = nor-isram.ld
 endif
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif

configs/sama5d3x-ek/ostest/Make.defs

@@ -40,9 +40,11 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
@@ -50,12 +52,15 @@ else
   LDSCRIPT = nor-isram.ld
 endif
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif

configs/sama5d3x-ek/ov2640/Make.defs

@@ -40,9 +40,11 @@ include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolch
 ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
   LDSCRIPT = isram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
   LDSCRIPT = ddram.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
 ifeq ($(CONFIG_BOOT_SDRAM_DATA),y)
   LDSCRIPT = nor-ddram.ld
@@ -50,12 +52,15 @@ else
   LDSCRIPT = nor-isram.ld
 endif
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
 #  LDSCRIPT = cs1flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
 #  LDSCRIPT = cs2flash.ld
 endif
+
 ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
 #  LDSCRIPT = cs3flash.ld
 endif