SAM4S Xplained Pro: Watchdog timer support for Bob Doison

2014-04-21 19:19:56 -06:00 · 2014-04-21 19:19:56 -06:00 · 78c2f88fef
commit 78c2f88fef
parent b5c7f41c5d
6 changed files with 493 additions and 103 deletions
--- a/configs/sam4s-xplained-pro/TODO.txt
+++ b/configs/sam4s-xplained-pro/TODO.txt
@ -1,5 +1,3 @@
-
-
 - implement flash driver
   - see arch/arm/src/stm32/stm32_flash.c and related
     - both banks could be mapped with care taken not to erase the active code. 
@ -7,3 +5,8 @@
       
   - once implemented, the free() cmd replacement can show flash information. 

+ - Seen crashes when running serial ports below 921600
+ - USB serial not quite stable when pushing lots of data
+ 
+ - UARTs don't use DMA. We may need this for high baudrates.
+   - Inbound hardware flow control requires dma. 
--- a/configs/sam4s-xplained-pro/include/board.h
+++ b/configs/sam4s-xplained-pro/include/board.h
@ -54,8 +54,8 @@
 ************************************************************************************/

 /* Clocking *************************************************************************/
-/* After power-on reset, the sam3u device is running on a 4MHz internal RC.  These
- * definitions will configure clocking with MCK = 48MHz, PLLA = 96, and CPU=120MHz.
+/* After power-on reset, the sam4s device is running on a 4MHz internal RC.  These
+ * definitions will configure clocking with MCK = 120MHz, PLLA = 240, and CPU=120MHz.
 */

 /* Main oscillator register settings */
@ -69,6 +69,8 @@
 * PLLdiv: 1 (bypassed)
 * Fpll:   (12MHz * 20) / 1 = 240MHz
 */
+#define BOARD_32KOSC_FREQUENCY     (32768)
+#define BOARD_SLCK_FREQUENCY       (BOARD_32KOSC_FREQUENCY)

 #define BOARD_MAINOSC_FREQUENCY    (12000000)
 #define BOARD_CKGR_PLLAR_MUL       (19 << PMC_CKGR_PLLAR_MUL_SHIFT)
--- a/configs/sam4s-xplained-pro/nsh/defconfig
+++ b/configs/sam4s-xplained-pro/nsh/defconfig
@ -26,6 +26,7 @@ CONFIG_HOST_LINUX=y
 CONFIG_INTELHEX_BINARY=y
 # CONFIG_MOTOROLA_SREC is not set
 CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set

 #
 # Customize Header Files
@ -49,12 +50,13 @@ CONFIG_ARCH_HAVE_STACKCHECK=y
 #
 # CONFIG_DEBUG_MM is not set
 # CONFIG_DEBUG_SCHED is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_USB is not set
+# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_LIB is not set
 # CONFIG_DEBUG_BINFMT is not set
 # CONFIG_DEBUG_GRAPHICS is not set
 # CONFIG_DEBUG_IRQ is not set
-# CONFIG_DEBUG_STACK is not set
+CONFIG_DEBUG_STACK=y

 #
 # Driver Debug Options
@ -65,6 +67,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_DEBUG_DMA is not set
 # CONFIG_DEBUG_RTC is not set
+# CONFIG_DEBUG_WATCHDOG is not set
 # CONFIG_DEBUG_AUDIO is not set
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_ARCH_HAVE_CUSTOMOPT=y
@ -136,7 +139,6 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
 # CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
 # CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
 # CONFIG_ARMV7M_OABI_TOOLCHAIN is not set
-CONFIG_GPIO_IRQ=y
 CONFIG_ARCH_HAVE_EXTNAND=y
 CONFIG_ARCH_HAVE_EXTNOR=y
 CONFIG_ARCH_HAVE_EXTSRAM0=y
@ -195,6 +197,17 @@ CONFIG_ARCH_CHIP_SAM4S=y
 #
 # AT91SAM3/4 Peripheral Support
 #
+# CONFIG_SAM34_ACC is not set
+# CONFIG_SAM34_ADC12B is not set
+# CONFIG_SAM34_CRCCU is not set
+# CONFIG_SAM34_DACC is not set
+# CONFIG_SAM34_DMAC1 is not set
+CONFIG_SAM34_HSMCI=y
+CONFIG_SAM34_PDCA=y
+# CONFIG_SAM34_PWM is not set
+CONFIG_SAM34_RTC=y
+# CONFIG_SAM34_RTT is not set
+CONFIG_SAM34_SMC=y
 # CONFIG_SAM34_SPI0 is not set
 # CONFIG_SAM34_SSC is not set
 # CONFIG_SAM34_TC0 is not set
@ -203,29 +216,19 @@ CONFIG_ARCH_CHIP_SAM4S=y
 # CONFIG_SAM34_TC3 is not set
 # CONFIG_SAM34_TC4 is not set
 # CONFIG_SAM34_TC5 is not set
-# CONFIG_SAM34_PWM is not set
 # CONFIG_SAM34_TWIM0 is not set
 # CONFIG_SAM34_TWIS0 is not set
 # CONFIG_SAM34_TWIM1 is not set
 # CONFIG_SAM34_TWIS1 is not set
-# CONFIG_SAM34_UART0 is not set
+CONFIG_SAM34_UART0=y
 CONFIG_SAM34_UART1=y
+CONFIG_SAM34_UDP=y
 # CONFIG_SAM34_USART0 is not set
-# CONFIG_SAM34_USART1 is not set
-# CONFIG_SAM34_ADC12B is not set
-# CONFIG_SAM34_DACC is not set
-# CONFIG_SAM34_ACC is not set
-CONFIG_SAM34_SMC=y
-CONFIG_SAM34_PDCA=y
-# CONFIG_SAM34_CRCCU is not set
-# CONFIG_SAM34_UDP is not set
-CONFIG_SAM34_RTC=y
-# CONFIG_SAM34_RTT is not set
+CONFIG_SAM34_USART1=y
 CONFIG_SAM34_WDT=y
-CONFIG_SAM34_HSMCI=y

 #
-# External Memory Configuration
+# AT91SAM3/4 External Memory Configuration
 #
 CONFIG_SAM34_EXTNAND=y
 CONFIG_SAM34_EXTNANDSIZE=268435456
@ -236,14 +239,34 @@ CONFIG_SAM34_EXTNANDSIZE=268435456
 #
 # AT91SAM3/4 GPIO Interrupt Configuration
 #
-CONFIG_GPIOA_IRQ=y
-# CONFIG_GPIOB_IRQ is not set
-CONFIG_GPIOC_IRQ=y
+CONFIG_SAM34_GPIO_IRQ=y
+CONFIG_SAM34_GPIOA_IRQ=y
+CONFIG_SAM34_GPIOB_IRQ=y
+CONFIG_SAM34_GPIOC_IRQ=y
+
+#
+# AT91SAM3/4 HSMCI device driver options
+#
+CONFIG_SAM34_HSMCI_RDPROOF=y
+CONFIG_SAM34_HSMCI_WRPROOF=y
+
+#
+# AT91SAM3/4 USB Full Speed Device Controller driver (DCD) options
+#
+# CONFIG_SAM34_UDP_REGDEBUG is not set

 #
 # AT91SAM3/4 Watchdog Configuration
 #
-# CONFIG_WDT_ENABLED_ON_RESET is not set
+CONFIG_WDT_ENABLED_ON_RESET=y
+# CONFIG_WDT_DISABLE_ON_RESET is not set
+CONFIG_WDT_TIMEOUT=4000
+CONFIG_WDT_MINTIME=2000
+CONFIG_WDT_THREAD=y
+CONFIG_WDT_THREAD_NAME="wdog"
+CONFIG_WDT_THREAD_INTERVAL=2000
+CONFIG_WDT_THREAD_PRIORITY=99
+CONFIG_WDT_THREAD_STACKSIZE=512

 #
 # Architecture Options
@ -259,12 +282,13 @@ CONFIG_ARCH_HAVE_VFORK=y
 # CONFIG_ARCH_NAND_HWECC is not set
 CONFIG_ARCH_IRQPRIO=y
 CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_USBDUMP=y
 # CONFIG_ENDIAN_BIG is not set
 # CONFIG_ARCH_IDLE_CUSTOM is not set
 CONFIG_ARCH_HAVE_RAMFUNCS=y
 # CONFIG_ARCH_RAMFUNCS is not set
 CONFIG_ARCH_HAVE_RAMVECTORS=y
-CONFIG_ARCH_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set

 #
 # Board Settings
@ -322,29 +346,6 @@ CONFIG_NSH_MMCSDSLOTNO=0
 #
 # RTOS Features
 #
-# CONFIG_BOARD_INITIALIZE is not set
-CONFIG_MSEC_PER_TICK=10
-# CONFIG_SYSTEM_TIME64 is not set
-CONFIG_RR_INTERVAL=50
-# CONFIG_SCHED_CPULOAD is not set
-# CONFIG_SCHED_INSTRUMENTATION is not set
-CONFIG_TASK_NAME_SIZE=16
-# CONFIG_SCHED_HAVE_PARENT is not set
-CONFIG_JULIAN_TIME=y
-CONFIG_START_YEAR=2014
-CONFIG_START_MONTH=3
-CONFIG_START_DAY=20
-CONFIG_DEV_CONSOLE=y
-# CONFIG_MUTEX_TYPES is not set
-# CONFIG_PRIORITY_INHERITANCE is not set
-# CONFIG_FDCLONE_DISABLE is not set
-# CONFIG_FDCLONE_STDIO is not set
-CONFIG_SDCLONE_DISABLE=y
-CONFIG_SCHED_WAITPID=y
-# CONFIG_SCHED_STARTHOOK is not set
-# CONFIG_SCHED_ATEXIT is not set
-# CONFIG_SCHED_ONEXIT is not set
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_DISABLE_OS_API=y
 # CONFIG_DISABLE_CLOCK is not set
 # CONFIG_DISABLE_POSIX_TIMERS is not set
@ -353,6 +354,63 @@ CONFIG_DISABLE_OS_API=y
 # CONFIG_DISABLE_MQUEUE is not set
 CONFIG_DISABLE_ENVIRON=y

+#
+# Clocks and Timers
+#
+CONFIG_MSEC_PER_TICK=10
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+CONFIG_JULIAN_TIME=y
+CONFIG_START_YEAR=2014
+CONFIG_START_MONTH=3
+CONFIG_START_DAY=20
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=32
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Tasks and Scheduling
+#
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_RR_INTERVAL=50
+CONFIG_TASK_NAME_SIZE=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_MAX_TASKS=16
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+# CONFIG_PRIORITY_INHERITANCE is not set
+
+#
+# RTOS hooks
+#
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+
 #
 # Signal Numbers
 #
@ -363,19 +421,10 @@ CONFIG_SIG_SIGCONDTIMEDOUT=16
 CONFIG_SIG_SIGWORK=17

 #
-# Sizes of configurable things (0 disables)
+# POSIX Message Queue Options
 #
-CONFIG_MAX_TASKS=16
-CONFIG_MAX_TASK_ARGS=4
-CONFIG_NPTHREAD_KEYS=4
-CONFIG_NFILE_DESCRIPTORS=8
-CONFIG_NFILE_STREAMS=8
-CONFIG_NAME_MAX=32
 CONFIG_PREALLOC_MQ_MSGS=8
 CONFIG_MQ_MAXMSGSIZE=32
-CONFIG_MAX_WDOGPARMS=2
-CONFIG_PREALLOC_WDOGS=4
-CONFIG_PREALLOC_TIMERS=4

 #
 # Stack and heap information
@ -403,7 +452,8 @@ CONFIG_DEV_ZERO=y
 CONFIG_RTC=y
 CONFIG_RTC_DATETIME=y
 CONFIG_RTC_ALARM=y
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_DEVPATH="/dev/watchdog0"
 # CONFIG_ANALOG is not set
 # CONFIG_AUDIO_DEVICES is not set
 # CONFIG_VIDEO_DEVICES is not set
@ -429,9 +479,10 @@ CONFIG_SDIO_BLOCKSETUP=y
 # CONFIG_SERCOMM_CONSOLE is not set
 CONFIG_SERIAL=y
 # CONFIG_DEV_LOWCONSOLE is not set
+CONFIG_SERIAL_REMOVABLE=y
 # CONFIG_16550_UART is not set
 # CONFIG_ARCH_HAVE_UART is not set
-# CONFIG_ARCH_HAVE_UART0 is not set
+CONFIG_ARCH_HAVE_UART0=y
 CONFIG_ARCH_HAVE_UART1=y
 # CONFIG_ARCH_HAVE_UART2 is not set
 # CONFIG_ARCH_HAVE_UART3 is not set
@ -443,7 +494,7 @@ CONFIG_ARCH_HAVE_UART1=y
 # CONFIG_ARCH_HAVE_SCI0 is not set
 # CONFIG_ARCH_HAVE_SCI1 is not set
 # CONFIG_ARCH_HAVE_USART0 is not set
-# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART1=y
 # CONFIG_ARCH_HAVE_USART2 is not set
 # CONFIG_ARCH_HAVE_USART3 is not set
 # CONFIG_ARCH_HAVE_USART4 is not set
@ -455,12 +506,27 @@ CONFIG_ARCH_HAVE_UART1=y
 #
 # USART Configuration
 #
+CONFIG_USART1_ISUART=y
 CONFIG_MCU_SERIAL=y
 CONFIG_STANDARD_SERIAL=y
 # CONFIG_SERIAL_TIOCSERGSTRUCT is not set
-CONFIG_UART1_SERIAL_CONSOLE=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+# CONFIG_UART1_SERIAL_CONSOLE is not set
+# CONFIG_USART1_SERIAL_CONSOLE is not set
 # CONFIG_NO_SERIAL_CONSOLE is not set

+#
+# UART0 Configuration
+#
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART0_BAUD=912600
+CONFIG_UART0_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART0_2STOP=0
+# CONFIG_UART0_IFLOWCONTROL is not set
+# CONFIG_UART0_OFLOWCONTROL is not set
+
 #
 # UART1 Configuration
 #
@ -470,11 +536,65 @@ CONFIG_UART1_BAUD=921600
 CONFIG_UART1_BITS=8
 CONFIG_UART1_PARITY=0
 CONFIG_UART1_2STOP=0
-CONFIG_UART1_IFLOWCONTROL=y
-CONFIG_UART1_OFLOWCONTROL=y
-CONFIG_SERIAL_IFLOWCONTROL=y
-CONFIG_SERIAL_OFLOWCONTROL=y
-# CONFIG_USBDEV is not set
+# CONFIG_UART1_IFLOWCONTROL is not set
+# CONFIG_UART1_OFLOWCONTROL is not set
+
+#
+# USART1 Configuration
+#
+CONFIG_USART1_RXBUFSIZE=256
+CONFIG_USART1_TXBUFSIZE=256
+CONFIG_USART1_BAUD=921600
+CONFIG_USART1_BITS=8
+CONFIG_USART1_PARITY=0
+CONFIG_USART1_2STOP=0
+# CONFIG_USART1_IFLOWCONTROL is not set
+# CONFIG_USART1_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+CONFIG_USBDEV=y
+
+#
+# USB Device Controller Driver Options
+#
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+# CONFIG_USBDEV_SELFPOWERED is not set
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=100
+# CONFIG_USBDEV_DMA is not set
+CONFIG_ARCH_USBDEV_STALLQUEUE=y
+CONFIG_USBDEV_TRACE=y
+CONFIG_USBDEV_TRACE_NRECORDS=256
+CONFIG_USBDEV_TRACE_STRINGS=y
+
+#
+# USB Device Class Driver Options
+#
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+CONFIG_CDCACM=y
+# CONFIG_CDCACM_CONSOLE is not set
+CONFIG_CDCACM_EP0MAXPACKET=64
+CONFIG_CDCACM_EPINTIN=1
+CONFIG_CDCACM_EPINTIN_FSSIZE=64
+CONFIG_CDCACM_EPINTIN_HSSIZE=64
+CONFIG_CDCACM_EPBULKOUT=3
+CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
+CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
+CONFIG_CDCACM_EPBULKIN=2
+CONFIG_CDCACM_EPBULKIN_FSSIZE=64
+CONFIG_CDCACM_EPBULKIN_HSSIZE=512
+CONFIG_CDCACM_NWRREQS=4
+CONFIG_CDCACM_NRDREQS=4
+CONFIG_CDCACM_BULKIN_REQLEN=250
+CONFIG_CDCACM_RXBUFSIZE=1024
+CONFIG_CDCACM_TXBUFSIZE=1024
+CONFIG_CDCACM_VENDORID=0x0525
+CONFIG_CDCACM_PRODUCTID=0xa4a7
+CONFIG_CDCACM_VENDORSTR="NuttX"
+CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial"
+# CONFIG_USBMSC is not set
 # CONFIG_USBHOST is not set
 # CONFIG_WIRELESS is not set

@ -642,7 +762,6 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
 # CONFIG_EXAMPLES_HIDKBD is not set
 # CONFIG_EXAMPLES_KEYPADTEST is not set
 # CONFIG_EXAMPLES_IGMP is not set
-# CONFIG_EXAMPLES_LCDRW is not set
 # CONFIG_EXAMPLES_MM is not set
 # CONFIG_EXAMPLES_MODBUS is not set
 # CONFIG_EXAMPLES_MOUNT is not set
@ -776,7 +895,7 @@ CONFIG_NSH_CODECS_BUFSIZE=128
 CONFIG_NSH_CMDOPT_HEXDUMP=y
 CONFIG_NSH_PROC_MOUNTPOUNT="/proc"
 CONFIG_NSH_FILEIOSIZE=2048
-# CONFIG_NSH_STRERROR is not set
+CONFIG_NSH_STRERROR=y
 CONFIG_NSH_LINELEN=80
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
 CONFIG_NSH_CMDPARMS=y
@ -789,11 +908,13 @@ CONFIG_NSH_NESTDEPTH=3
 # CONFIG_NSH_DISABLE_LOOPS is not set
 # CONFIG_NSH_DISABLEBG is not set
 CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_USBCONSOLE is not set

 #
 # USB Trace Support
 #
-# CONFIG_NSH_CONDEV is not set
+# CONFIG_NSH_USBDEV_TRACE is not set
+CONFIG_NSH_CONDEV="/dev/console"
 CONFIG_NSH_ARCHINIT=y

 #
@ -809,27 +930,15 @@ CONFIG_NSH_ARCHINIT=y
 # System Libraries and NSH Add-Ons
 #

-#
-# USB CDC/ACM Device Commands
-#
-
-#
-# USB Composite Device Commands
-#
-
 #
 # Custom Free Memory Command
 #
 # CONFIG_SYSTEM_FREE is not set

 #
-# I2C tool
+# EMACS-like Command Line Editor
 #
-
-#
-# INI File Parser
-#
-# CONFIG_SYSTEM_INIFILE is not set
+# CONFIG_SYSTEM_CLE is not set

 #
 # FLASH Program Installation
@ -840,6 +949,15 @@ CONFIG_NSH_ARCHINIT=y
 # FLASH Erase-all Command
 #

+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
 #
 # NxPlayer media player library / command Line
 #
@ -877,15 +995,6 @@ CONFIG_SYSTEM_SDCARD=y
 CONFIG_SYSTEM_SYSINFO=y
 CONFIG_SYSTEM_SYSINFO_STACKSIZE=1024

-#
-# USB Monitor
-#
-
-#
-# EMACS-like Command Line Editor
-#
-# CONFIG_SYSTEM_CLE is not set
-
 #
 # VI Work-Alike Editor
 #
@ -894,11 +1003,43 @@ CONFIG_SYSTEM_SYSINFO_STACKSIZE=1024
 #
 # Stack Monitor
 #
+CONFIG_SYSTEM_STACKMONITOR=y
+CONFIG_SYSTEM_STACKMONITOR_STACKSIZE=1024
+CONFIG_SYSTEM_STACKMONITOR_PRIORITY=50
+CONFIG_SYSTEM_STACKMONITOR_INTERVAL=2
+
+#
+# USB CDC/ACM Device Commands
+#
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_CDCACM_DEVMINOR=0
+CONFIG_SYSTEM_CDCACM_TRACEINIT=y
+CONFIG_SYSTEM_CDCACM_TRACECLASS=y
+CONFIG_SYSTEM_CDCACM_TRACETRANSFERS=y
+CONFIG_SYSTEM_CDCACM_TRACECONTROLLER=y
+CONFIG_SYSTEM_CDCACM_TRACEINTERRUPTS=y
+
+#
+# USB Composite Device Commands
+#

 #
 # USB Mass Storage Device Commands
 #

+#
+# USB Monitor
+#
+CONFIG_SYSTEM_USBMONITOR=y
+CONFIG_SYSTEM_USBMONITOR_STACKSIZE=1024
+CONFIG_SYSTEM_USBMONITOR_PRIORITY=50
+CONFIG_SYSTEM_USBMONITOR_INTERVAL=2
+CONFIG_SYSTEM_USBMONITOR_TRACEINIT=y
+CONFIG_SYSTEM_USBMONITOR_TRACECLASS=y
+CONFIG_SYSTEM_USBMONITOR_TRACETRANSFERS=y
+CONFIG_SYSTEM_USBMONITOR_TRACECONTROLLER=y
+CONFIG_SYSTEM_USBMONITOR_TRACEINTERRUPTS=y
+
 #
 # Zmodem Commands
 #
--- a/configs/sam4s-xplained-pro/src/Makefile
+++ b/configs/sam4s-xplained-pro/src/Makefile
@ -68,6 +68,11 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y)
 CSRCS += sam_buttons.c
 endif

+ifeq ($(CONFIG_SAM34_WDT),y)
+CSRCS += sam_wdt.c
+endif
+
+
 COBJS = $(CSRCS:.c=$(OBJEXT))

 SRCS = $(ASRCS) $(CSRCS)
--- a/configs/sam4s-xplained-pro/src/sam_nsh.c
+++ b/configs/sam4s-xplained-pro/src/sam_nsh.c
@ -98,11 +98,10 @@ int nsh_archinitialize(void)
  int ret;
 #endif

-  message("initializing...\n");
-
 #ifdef HAVE_HSMCI
  /* Initialize the HSMCI driver */

+  message("initializing HSMCI\n");
  ret = sam_hsmci_initialize();
  if (ret < 0)
    {
@ -114,6 +113,7 @@ int nsh_archinitialize(void)
 #ifdef HAVE_PROC
  /* mount the proc filesystem */

+  message("Mounting procfs to /proc\n");
  ret = mount(NULL, "/proc", "procfs", 0, NULL);
  if (ret < 0)
  {
@ -125,6 +125,7 @@ int nsh_archinitialize(void)
 #ifdef HAVE_USBMONITOR
  /* Start the USB Monitor */

+  message("Starting USB Monitor\n");
  ret = usbmonitor_start(0, NULL);
  if (ret != OK)
    {
@ -134,6 +135,7 @@ int nsh_archinitialize(void)
 #endif

 #warning "add automount config...."
+  message("Mounting /dev/mmcsd0 to /fat\n");
  ret = mount("/dev/mmcsd0", "/fat", "vfat", 0, NULL);
  if (ret < 0)
  {
--- a/configs/sam4s-xplained-pro/src/sam_wdt.c
+++ b/configs/sam4s-xplained-pro/src/sam_wdt.c
@ -0,0 +1,237 @@
+/************************************************************************************
+ * configs/sam4s-xplained-pro/src/up_watchdog.c
+ *
+ *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <sys/types.h>
+#include <sys/ioctl.h>
+
+#include <errno.h>
+#include <debug.h>
+#include <sched.h>
+#include <stdio.h>
+#include <fcntl.h>
+
+#include <nuttx/watchdog.h>
+#include <arch/board/board.h>
+
+#include <nuttx/kthread.h>
+
+#include "sam_wdt.h"
+#include <nuttx/clock.h>
+
+#ifdef CONFIG_WATCHDOG
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Configuration *******************************************************************/
+/* Wathdog hardware should be enabled */
+
+#if !defined(CONFIG_SAM34_WDT)
+#  warning "CONFIG_SAM34_WDT must be defined"
+#endif
+
+/* Select the path to the registered watchdog timer device */
+
+#ifndef CONFIG_WATCHDOG_DEVPATH
+#  ifdef CONFIG_EXAMPLES_WATCHDOG_DEVPATH
+#    define CONFIG_WATCHDOG_DEVPATH CONFIG_EXAMPLES_WATCHDOG_DEVPATH
+#  else
+#    define CONFIG_WATCHDOG_DEVPATH "/dev/watchdog0"
+#  endif
+#endif
+
+/* Debug ***************************************************************************/
+/* Non-standard debug that may be enabled just for testing the watchdog timer */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_WATCHDOG
+#endif
+
+#ifdef CONFIG_DEBUG_WATCHDOG
+#  define wdgdbg                 dbg
+#  define wdglldbg               lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define wdgvdbg              vdbg
+#    define wdgllvdbg            llvdbg
+#  else
+#    define wdgvdbg(x...)
+#    define wdgllvdbg(x...)
+#  endif
+#else
+#  define wdgdbg(x...)
+#  define wdglldbg(x...)
+#  define wdgvdbg(x...)
+#  define wdgllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+
+/*
+Watchdog kicker task
+*/
+#if defined(CONFIG_WDT_THREAD)
+static int wdog_daemon(int argc, char *argv[])
+{
+  int fd;
+  int ret;
+
+  /* Open the watchdog device for reading */
+
+  wdgvdbg("Opening.\n");
+  fd = open(CONFIG_WATCHDOG_DEVPATH, O_RDONLY);
+  if (fd < 0)
+    {
+      wdgdbg("open %s failed: %d\n", CONFIG_WATCHDOG_DEVPATH, errno);
+      goto errout;
+    }
+
+  /* Start the watchdog timer. */
+
+  wdgvdbg("Starting.\n");
+  ret = ioctl(fd, WDIOC_START, 0);
+  if (ret < 0)
+    {
+      wdgdbg("ioctl(WDIOC_START) failed: %d\n", errno);
+      goto errout_with_dev;
+    }
+
+  while(1)
+    {
+      usleep((CONFIG_WDT_THREAD_INTERVAL)*1000);
+
+      wdgvdbg("ping\n");
+      ret = ioctl(fd, WDIOC_KEEPALIVE, 0);
+      if (ret < 0)
+        {
+          wdgdbg("ioctl(WDIOC_KEEPALIVE) failed: %d\n", errno);
+          goto errout_with_dev;
+        }
+    }
+
+errout_with_dev:
+  close(fd);
+errout:
+  return ERROR;
+}
+#endif
+
+/****************************************************************************
+ * Name: up_wdginitialize()
+ *
+ * Description:
+ *   Perform architecture-specific initialization of the Watchdog hardware.
+ *   This interface must be provided by all configurations using
+ *   apps/examples/watchdog
+ *
+ ****************************************************************************/
+
+int up_wdginitialize(void)
+{
+
+#if (defined(CONFIG_SAM34_WDT) && !defined(CONFIG_WDT_DISABLE_ON_RESET))
+  int fd;
+  int ret;
+
+  /* Initialize tha register the watchdog timer device */
+
+  wdgvdbg("Initializing Watchdog driver...\n");
+  sam_wdtinitialize(CONFIG_WATCHDOG_DEVPATH);
+
+  /* Open the watchdog device */
+
+  wdgvdbg("Opening.\n");
+  fd = open(CONFIG_WATCHDOG_DEVPATH, O_RDONLY);
+  if (fd < 0)
+    {
+      wdgdbg("open %s failed: %d\n", CONFIG_WATCHDOG_DEVPATH, errno);
+      goto errout;
+    }
+
+  /* Set the watchdog timeout */
+
+  wdgvdbg("Timeout = %d.\n", CONFIG_WDT_TIMEOUT);
+  ret = ioctl(fd, WDIOC_SETTIMEOUT, (unsigned long)CONFIG_WDT_TIMEOUT);
+  if (ret < 0)
+    {
+      wdgdbg("ioctl(WDIOC_SETTIMEOUT) failed: %d\n", errno);
+      goto errout_with_dev;
+    }
+
+  /* Set the watchdog minimum time */
+
+  wdgvdbg("MinTime = %d.\n", CONFIG_WDT_MINTIME);
+  ret = ioctl(fd, WDIOC_MINTIME, (unsigned long)CONFIG_WDT_MINTIME);
+  if (ret < 0)
+    {
+      wdgdbg("ioctl(WDIOC_MINTIME) failed: %d\n", errno);
+      goto errout_with_dev;
+    }
+
+  /* Start Kicker task */
+
+#if defined(CONFIG_WDT_THREAD)
+  sched_lock();
+
+  int taskid = KERNEL_THREAD(CONFIG_WDT_THREAD_NAME,
+                             CONFIG_WDT_THREAD_PRIORITY,
+                             CONFIG_WDT_THREAD_STACKSIZE,
+                             (main_t)wdog_daemon, (FAR char * const *)NULL);
+
+  ASSERT(taskid > 0);
+  sched_unlock();
+#endif
+  return OK;
+errout_with_dev:
+  close(fd);
+errout:
+  return ERROR;
+#else
+  return -ENODEV;
+#endif
+}
+
+#endif /* CONFIG_WATCHDOG */