NSH configuration for SH-1
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1204 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
2a12abf183
commit
79eb34606b
97
configs/us7032evb1/nsh/Make.defs
Normal file
97
configs/us7032evb1/nsh/Make.defs
Normal file
@ -0,0 +1,97 @@
|
|||||||
|
##############################################################################
|
||||||
|
# configs/olimex-strp711/nsh/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
##############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = -Os -fno-strict-aliasing -fno-strength-reduce \
|
||||||
|
-fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCPUFLAGS = -m1 -fno-builtin
|
||||||
|
ARCHPICFLAGS = -fpic
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
|
||||||
|
|
||||||
|
CROSSDEV = sh-elf-
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||||
|
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG}","y")
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
561
configs/us7032evb1/nsh/defconfig
Normal file
561
configs/us7032evb1/nsh/defconfig
Normal file
@ -0,0 +1,561 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/us7032evb1/nsh/defconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# Architecture selection
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||||
|
# processor architecture.
|
||||||
|
# CONFIG_ARCH_name - for use in C code. This identifies the
|
||||||
|
# particular chip or SoC that the architecture is implemented
|
||||||
|
# in.
|
||||||
|
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||||
|
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||||
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||||
|
# the board that supports the particular chip or SoC.
|
||||||
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||||
|
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||||
|
# CONFIG_ARCH_NOINTC - define if the architecture does not
|
||||||
|
# support an interrupt controller or otherwise cannot support
|
||||||
|
# APIs like up_enable_irq() and up_disable_irq().
|
||||||
|
# CONFIG_ARCH_IRQPRIO
|
||||||
|
# Define if the architecture suports prioritizaton of interrupts
|
||||||
|
# and the up_prioritize_irq() API.
|
||||||
|
# CONFIG_ENDIAN_BIG - Define for big-endian operation
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||||
|
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to Olimex STR-P711
|
||||||
|
# CONFIG_ARCH_BUTTONS - Support reading buttons. Unique to Olimex STR-P711
|
||||||
|
# CONFIG_DRAM_SIZE - Describes the internal DRAM.
|
||||||
|
# CONFIG_DRAM_START - The start address of internal DRAM
|
||||||
|
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||||
|
# stack. If defined, this symbol is the size of the interrupt
|
||||||
|
# stack in bytes. If not defined, the user task stacks will be
|
||||||
|
# used during interrupt handling.
|
||||||
|
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||||
|
#
|
||||||
|
CONFIG_ARCH=sh
|
||||||
|
CONFIG_ARCH_CHIP=sh1
|
||||||
|
CONFIG_ARCH_SH1=y
|
||||||
|
CONFIG_ARCH_SH7032=y
|
||||||
|
CONFIG_ARCH_BOARD=us7032evb1
|
||||||
|
CONFIG_ARCH_BOARD_US7032EVB1=y
|
||||||
|
CONFIG_ENDIAN_BIG=y
|
||||||
|
CONFIG_ARCH_NOINTC=y
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=572
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_BUTTONS=y
|
||||||
|
CONFIG_DRAM_SIZE=0x0000e000
|
||||||
|
CONFIG_DRAM_START=0x0a002000
|
||||||
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# SH-1 specific boot/build settings
|
||||||
|
#
|
||||||
|
CONFIG_SH1_DMAC0=n
|
||||||
|
CONFIG_SH1_DMAC1=n
|
||||||
|
CONFIG_SH1_DMAC2=n
|
||||||
|
CONFIG_SH1_DMAC3=n
|
||||||
|
CONFIG_SH1_ITU1=n
|
||||||
|
CONFIG_SH1_ITU2=n
|
||||||
|
CONFIG_SH1_ITU3=n
|
||||||
|
CONFIG_SH1_ITU4=n
|
||||||
|
CONFIG_SH1_SCI0=n
|
||||||
|
CONFIG_SH1_SCI1=y
|
||||||
|
CONFIG_SH1_PCU=n
|
||||||
|
CONFIG_SH1_AD=n
|
||||||
|
CONFIG_SH1_WDT=n
|
||||||
|
CONFIG_SH1_CMI=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SH1 specific device driver settings
|
||||||
|
#
|
||||||
|
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||||
|
# console and ttys0 (default is the UART0).
|
||||||
|
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||||
|
# This specific the size of the receive buffer
|
||||||
|
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||||
|
# being sent. This specific the size of the transmit buffer
|
||||||
|
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||||
|
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||||
|
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0
|
||||||
|
# CONFIG_UARTn_2STOP - Two stop bits
|
||||||
|
#
|
||||||
|
CONFIG_SCI0_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_SCI1_SERIAL_CONSOLE=y
|
||||||
|
CONFIG_SCI0_TXBUFSIZE=64
|
||||||
|
CONFIG_SCI1_TXBUFSIZE=256
|
||||||
|
CONFIG_SCI0_RXBUFSIZE=32
|
||||||
|
CONFIG_SCI1_RXBUFSIZE=256
|
||||||
|
CONFIG_SCI0_BAUD=9600
|
||||||
|
CONFIG_SCI1_BAUD=9600
|
||||||
|
CONFIG_SCI0_BITS=8
|
||||||
|
CONFIG_SCI1_BITS=8
|
||||||
|
CONFIG_SCI0_PARITY=0
|
||||||
|
CONFIG_SCI1_PARITY=0
|
||||||
|
CONFIG_SCI0_2STOP=0
|
||||||
|
CONFIG_SCI1_2STOP=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# General build options
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||||
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||||
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||||
|
# different loaders using the GNU objcopy program. This option
|
||||||
|
# should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||||
|
#
|
||||||
|
CONFIG_RRLOAD_BINARY=n
|
||||||
|
CONFIG_INTELHEX_BINARY=n
|
||||||
|
CONFIG_MOTOROLA_SREC=y
|
||||||
|
CONFIG_RAW_BINARY=y
|
||||||
|
CONFIG_HAVE_LIBM=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# General OS setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLE - identifies the subdirectory in examples
|
||||||
|
# that will be used in the build
|
||||||
|
# CONFIG_DEBUG - enables built-in debug options
|
||||||
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||||
|
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||||
|
# regions of memory to allocate from, this specifies the
|
||||||
|
# number of memory regions that the memory manager must
|
||||||
|
# handle and enables the API mm_addregion(start, end);
|
||||||
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||||
|
# time console output
|
||||||
|
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
|
||||||
|
# or TICKS_PER_MSEC=10. This setting may be defined to
|
||||||
|
# inform NuttX that the processor hardware is providing
|
||||||
|
# system timer interrupts at some interrupt interval other
|
||||||
|
# than 10 msec.
|
||||||
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||||
|
# this number of milliseconds; Round robin scheduling can
|
||||||
|
# be disabled by setting this value to zero.
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||||
|
# scheduler to monitor system performance
|
||||||
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||||
|
# task name to save in the TCB. Useful if scheduler
|
||||||
|
# instrumentation is selected. Set to zero to disable.
|
||||||
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||||
|
# Used to initialize the internal time logic.
|
||||||
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions
|
||||||
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||||
|
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||||
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||||
|
# driver (minimul support)
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLE=nsh
|
||||||
|
CONFIG_DEBUG=n
|
||||||
|
CONFIG_DEBUG_VERBOSE=n
|
||||||
|
CONFIG_MM_REGIONS=1
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_RR_INTERVAL=0
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
CONFIG_START_YEAR=2008
|
||||||
|
CONFIG_START_MONTH=11
|
||||||
|
CONFIG_START_DAY=10
|
||||||
|
CONFIG_JULIAN_TIME=n
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# The following can be used to disable categories of
|
||||||
|
# APIs supported by the OS. If the compiler supports
|
||||||
|
# weak functions, then it should not be necessary to
|
||||||
|
# disable functions unless you want to restrict usage
|
||||||
|
# of those APIs.
|
||||||
|
#
|
||||||
|
# There are certain dependency relationships in these
|
||||||
|
# features.
|
||||||
|
#
|
||||||
|
# o mq_notify logic depends on signals to awaken tasks
|
||||||
|
# waiting for queues to become full or empty.
|
||||||
|
# o pthread_condtimedwait() depends on signals to wake
|
||||||
|
# up waiting tasks.
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_CLOCK=y
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||||
|
CONFIG_DISABLE_PTHREAD=y
|
||||||
|
CONFIG_DISABLE_SIGNALS=y
|
||||||
|
CONFIG_DISABLE_MQUEUE=y
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
CONFIG_DISABLE_ENVIRON=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Misc libc settings
|
||||||
|
#
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||||
|
# little smaller if we do not support fieldwidthes
|
||||||
|
#
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Allow for architecture optimized implementations
|
||||||
|
#
|
||||||
|
# The architecture can provide optimized versions of the
|
||||||
|
# following to improve sysem performance
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_MEMCPY=n
|
||||||
|
CONFIG_ARCH_MEMCMP=n
|
||||||
|
CONFIG_ARCH_MEMMOVE=n
|
||||||
|
CONFIG_ARCH_MEMSET=n
|
||||||
|
CONFIG_ARCH_STRCMP=n
|
||||||
|
CONFIG_ARCH_STRCPY=n
|
||||||
|
CONFIG_ARCH_STRNCPY=n
|
||||||
|
CONFIG_ARCH_STRLEN=n
|
||||||
|
CONFIG_ARCH_BZERO=n
|
||||||
|
CONFIG_ARCH_KMALLOC=n
|
||||||
|
CONFIG_ARCH_KZMALLOC=n
|
||||||
|
CONFIG_ARCH_KFREE=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||||
|
# active tasks. This value must be a power of two.
|
||||||
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||||
|
# of parameters that a task may receive (i.e., maxmum value
|
||||||
|
# of 'argc')
|
||||||
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||||
|
# specific data that can be retained
|
||||||
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||||
|
# descriptors (one for each open)
|
||||||
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||||
|
# can be fopen'ed
|
||||||
|
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||||
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||||
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||||
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# message structures to minimize dynamic allocations
|
||||||
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||||
|
# a fixed payload size given by this settin (does not include
|
||||||
|
# other message structure overhead.
|
||||||
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||||
|
# can be passed to a watchdog handler
|
||||||
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# watchdog structures to minimize dynamic allocations
|
||||||
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||||
|
# timer structures. The system manages a pool of preallocated
|
||||||
|
# timer structures to minimize dynamic allocations. Set to
|
||||||
|
# zero for all dynamic allocations.
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=8
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=0
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=0
|
||||||
|
CONFIG_NUNGET_CHARS=0
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=0
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=0
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Filesystem configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_MMCSD_NSLOTS
|
||||||
|
# Number of MMC/SD slots supported by the driver
|
||||||
|
# CONFIG_MMCSD_READONLY
|
||||||
|
# Provide read-only access (default is read/write)
|
||||||
|
CONFIG_MMCSD_NSLOTS=1
|
||||||
|
CONFIG_MMCSD_READONLY=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# TCP/IP and UDP support via uIP
|
||||||
|
# CONFIG_NET - Enable or disable all network features
|
||||||
|
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||||
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||||
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||||
|
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||||
|
# CONFIG_NET_TCP - TCP support on or off
|
||||||
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||||
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||||
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||||
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||||
|
# CONFIG_NET_UDP - UDP support on or off
|
||||||
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||||
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||||
|
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||||
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||||
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||||
|
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||||
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||||
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||||
|
# CONFIG_NET_BROADCAST - Broadcast support
|
||||||
|
# CONFIG_NET_LLH_LEN - The link level header length
|
||||||
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||||
|
CONFIG_NET=n
|
||||||
|
CONFIG_NET_IPv6=n
|
||||||
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||||
|
CONFIG_NET_SOCKOPTS=y
|
||||||
|
CONFIG_NET_BUFSIZE=420
|
||||||
|
CONFIG_NET_TCP=n
|
||||||
|
CONFIG_NET_TCP_CONNS=40
|
||||||
|
CONFIG_NET_MAX_LISTENPORTS=40
|
||||||
|
CONFIG_NET_UDP=n
|
||||||
|
CONFIG_NET_UDP_CHECKSUMS=y
|
||||||
|
#CONFIG_NET_UDP_CONNS=10
|
||||||
|
CONFIG_NET_ICMP=n
|
||||||
|
CONFIG_NET_ICMP_PING=n
|
||||||
|
#CONFIG_NET_PINGADDRCONF=0
|
||||||
|
CONFIG_NET_STATISTICS=y
|
||||||
|
#CONFIG_NET_RECEIVE_WINDOW=
|
||||||
|
#CONFIG_NET_ARPTAB_SIZE=8
|
||||||
|
CONFIG_NET_BROADCAST=n
|
||||||
|
#CONFIG_NET_LLH_LEN=14
|
||||||
|
#CONFIG_NET_FWCACHE_SIZE=2
|
||||||
|
|
||||||
|
#
|
||||||
|
# UIP Network Utilities
|
||||||
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||||
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||||
|
CONFIG_NET_DHCP_LIGHT=n
|
||||||
|
CONFIG_NET_RESOLV_ENTRIES=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBDEV
|
||||||
|
# Enables USB device support
|
||||||
|
# CONFIG_USBDEV_ISOCHRONOUS
|
||||||
|
# Build in extra support for isochronous endpoints
|
||||||
|
# CONFIG_USBDEV_DUALSPEED
|
||||||
|
# Hardware handles high and full speed operation (USB 2.0)
|
||||||
|
# CONFIG_USBDEV_SELFPOWERED
|
||||||
|
# Will cause USB features to indicate that the device is
|
||||||
|
# self-powered
|
||||||
|
# CONFIG_USBDEV_MAXPOWER
|
||||||
|
# Maximum power consumption in mA
|
||||||
|
# CONFIG_USBDEV_TRACE
|
||||||
|
# Enables USB tracing for debug
|
||||||
|
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||||
|
# Number of trace entries to remember
|
||||||
|
CONFIG_USBDEV=n
|
||||||
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||||
|
CONFIG_USBDEV_DUALSPEED=n
|
||||||
|
CONFIG_USBDEV_SELFPOWERED=y
|
||||||
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||||
|
CONFIG_USBDEV_MAXPOWER=100
|
||||||
|
CONFIG_USBDEV_TRACE=n
|
||||||
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSER
|
||||||
|
# Enable compilation of the USB serial driver
|
||||||
|
# CONFIG_USBSER_EPINTIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# interrupt IN operation
|
||||||
|
# CONFIG_USBSER_EPBULKOUT
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk OUT operation
|
||||||
|
# CONFIG_USBSER_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk IN operation
|
||||||
|
# CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||||
|
# Size of the serial receive/transmit buffers
|
||||||
|
CONFIG_USBSER=n
|
||||||
|
CONFIG_USBSER_EPINTIN=1
|
||||||
|
CONFIG_USBSER_EPBULKOUT=2
|
||||||
|
CONFIG_USBSER_EPBULKIN=5
|
||||||
|
CONFIG_USBSER_NWRREQS=4
|
||||||
|
CONFIG_USBSER_NRDREQS=4
|
||||||
|
CONFIG_USBSER_VENDORID=0x067b
|
||||||
|
CONFIG_USBSER_PRODUCTID=0x2303
|
||||||
|
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||||
|
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||||
|
CONFIG_USBSER_RXBUFSIZE=512
|
||||||
|
CONFIG_USBSER_TXBUFSIZE=512
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Storage Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSTRG
|
||||||
|
# Enable compilation of the USB storage driver
|
||||||
|
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||||
|
# Max packet size for endpoint 0
|
||||||
|
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoints that support
|
||||||
|
# bulk OUT and IN operations
|
||||||
|
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||||
|
# The size of the buffer in each write/read request. This
|
||||||
|
# value needs to be at least as large as the endpoint
|
||||||
|
# maxpacket and ideally as large as a block device sector.
|
||||||
|
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSTRG_REMOVABLE
|
||||||
|
# Select if the media is removable
|
||||||
|
CONFIG_USBSTRG=n
|
||||||
|
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||||
|
CONFIG_USBSTRG_EPBULKOUT=2
|
||||||
|
CONFIG_USBSTRG_EPBULKIN=5
|
||||||
|
CONFIG_USBSTRG_NRDREQS=2
|
||||||
|
CONFIG_USBSTRG_NWRREQS=2
|
||||||
|
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||||
|
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||||
|
CONFIG_USBSTRG_VENDORID=0x584e
|
||||||
|
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||||
|
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||||
|
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||||
|
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||||
|
CONFIG_USBSTRG_REMOVABLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/ostest
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=4096
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nsh
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||||
|
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||||
|
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||||
|
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||||
|
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||||
|
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||||
|
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||||
|
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||||
|
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||||
|
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||||
|
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||||
|
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||||
|
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||||
|
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||||
|
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||||
|
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||||
|
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||||
|
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture-specific NSH options
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
|
||||||
|
# operation from FLASH.
|
||||||
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||||
|
# all stack operations outside of the nuttx model.
|
||||||
|
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||||
|
# CONFIG_PROC_STACK_SIZE - The size of the initial stack
|
||||||
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||||
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||||
|
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||||
|
# CONFIG_HEAP_SIZE - The size of the heap
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_FROM_FLASH=n
|
||||||
|
CONFIG_CUSTOM_STACK=n
|
||||||
|
CONFIG_STACK_POINTER=
|
||||||
|
CONFIG_PROC_STACK_SIZE=1024
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=1024
|
||||||
|
CONFIG_HEAP_BASE=
|
||||||
|
CONFIG_HEAP_SIZE=
|
||||||
91
configs/us7032evb1/nsh/ld.script
Normal file
91
configs/us7032evb1/nsh/ld.script
Normal file
@ -0,0 +1,91 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/us7032evb1/nsh/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
OUTPUT_ARCH(sh)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The us7032evb1 has CMON in PROM beginning at address 0x00000000 and
|
||||||
|
* either 64Kb or 256Kb of SRAM beginning at 0x0a000000. Neither the
|
||||||
|
* PROM nor the first 8Kb of SRAM are avaible to the devoleper as these
|
||||||
|
* are used by CMON. The next 1Kb of SRAM is dedicated to relocated
|
||||||
|
* interrupt vectors.
|
||||||
|
*/
|
||||||
|
|
||||||
|
. = 0x0a002000;
|
||||||
|
.text : {
|
||||||
|
_svect = ABSOLUTE(.);
|
||||||
|
*(.vects); /* Relocated interrupt vectors */
|
||||||
|
_evect = ABSOLUTE(.);
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.reset) /* Reset/IRQ code */
|
||||||
|
*(.text) /* Code */
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata) /* Read-only data */
|
||||||
|
*(.rodata.str1.4)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got) /* Global offset table */
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
}
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data) /* Modifiable data */
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
}
|
||||||
|
|
||||||
|
.bss : { /* BSS */
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
}
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
47
configs/us7032evb1/nsh/setenv.sh
Executable file
47
configs/us7032evb1/nsh/setenv.sh
Executable file
@ -0,0 +1,47 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/us7032evb1/nsh/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
export BUILDROOT_BIN=${WD}/../buildroot/build_sh/staging_dir/bin
|
||||||
|
export SH1BINARIES=$WD/configs/us7032evb1/bin
|
||||||
|
export PATH=${BUILDROOT_BIN}:${SH1BINARIES}:/sbin:/usr/sbin:${PATH_ORIG}
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
Loading…
Reference in New Issue
Block a user