up_pminitialize() needs to be called from instances of up_initialize()

arch/arm/src/common/up_initialize.c

@@ -53,6 +53,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include <arch/board/board.h>
 
@@ -159,21 +160,21 @@ void up_initialize(void)
 
   up_irqinitialize();
 
+#ifdef CONFIG_PM
   /* Initialize the power management subsystem.  This MCU-specific function
    * must be called *very* early in the initialization sequence *before* any
    * other device drivers are initialized (since they may attempt to register
    * with the power management subsystem).
    */
 
-#ifdef CONFIG_PM
   up_pminitialize();
 #endif
 
+#ifdef CONFIG_ARCH_DMA
   /* Initialize the DMA subsystem if the weak function up_dmainitialize has been
    * brought into the build
    */
 
-#ifdef CONFIG_ARCH_DMA
 #ifdef CONFIG_HAVE_WEAKFUNCTIONS
   if (up_dmainitialize)
 #endif

arch/avr/src/common/up_initialize.c

@@ -52,6 +52,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include <arch/board/board.h>
 
@@ -201,11 +202,21 @@ void up_initialize(void)
 
   up_irqinitialize();
 
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
+
+#ifdef CONFIG_ARCH_DMA
   /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
    * brought into the build
    */
 
-#ifdef CONFIG_ARCH_DMA
 #ifdef CONFIG_HAVE_WEAKFUNCTIONS
   if (up_dmainitialize)
 #endif

arch/hc/src/common/up_initialize.c

@@ -53,6 +53,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include "up_arch.h"
 #include "up_internal.h"
@@ -127,11 +128,21 @@ void up_initialize(void)
 
   up_irqinitialize();
 
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
+
+#ifdef CONFIG_ARCH_DMA
   /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
    * brought into the build
    */
 
-#ifdef CONFIG_ARCH_DMA
 #ifdef CONFIG_HAVE_WEAKFUNCTIONS
   if (up_dmainitialize)
 #endif

arch/mips/src/common/up_initialize.c

@@ -53,6 +53,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include <arch/board/board.h>
 
@@ -129,11 +130,21 @@ void up_initialize(void)
 
   up_irqinitialize();
 
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
+
+#ifdef CONFIG_ARCH_DMA
   /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
    * brought into the build
    */
 
-#ifdef CONFIG_ARCH_DMA
 #ifdef CONFIG_HAVE_WEAKFUNCTIONS
   if (up_dmainitialize)
 #endif

arch/rgmp/src/nuttx.c

@@ -56,6 +56,7 @@
 #include <nuttx/serial/pty.h>
 #include <nuttx/syslog/syslog.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include "task/task.h"
 #include "sched/sched.h"
@@ -107,6 +108,16 @@ void up_initialize(void)
 
   nuttx_arch_init();
 
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
+
 #if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
   /* Register the master pseudo-terminal multiplexor device */
 

arch/sh/src/common/up_initialize.c

@@ -53,6 +53,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include "up_arch.h"
 #include "up_internal.h"
@@ -131,9 +132,19 @@ void up_initialize(void)
 
   up_irqinitialize();
 
-  /* Initialize the system timer interrupt */
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
 
 #if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* Initialize the system timer interrupt */
+
   up_timer_initialize();
 #endif
 

arch/sim/src/up_initialize.c

@@ -54,6 +54,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include "up_internal.h"
 
@@ -126,15 +127,25 @@ static void up_init_smartfs(void)
 
 void up_initialize(void)
 {
+#ifdef CONFIG_NET
   /* The real purpose of the following is to make sure that syslog
    * is drawn into the link.  It is needed by up_tapdev which is linked
    * separately.
    */
 
-#ifdef CONFIG_NET
   syslog(LOG_INFO, "SIM: Initializing");
 #endif
 
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
+
 #if CONFIG_NFILE_DESCRIPTORS > 0
   /* Register devices */
 

arch/x86/src/common/up_initialize.c

@@ -53,6 +53,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include <arch/board/board.h>
 
@@ -129,11 +130,21 @@ void up_initialize(void)
 
   up_irqinitialize();
 
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
+
+#ifdef CONFIG_ARCH_DMA
   /* Initialize the DMA subsystem if the weak function up_dmainitialize has been
    * brought into the build
    */
 
-#ifdef CONFIG_ARCH_DMA
 #ifdef CONFIG_HAVE_WEAKFUNCTIONS
   if (up_dmainitialize)
 #endif

arch/z16/src/common/up_initialize.c

@@ -53,6 +53,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include <arch/board/board.h>
 
@@ -132,9 +133,9 @@ void up_initialize(void)
 
   up_calibratedelay();
 
+#if CONFIG_MM_REGIONS > 1
   /* Add any extra memory fragments to the memory manager */
 
-#if CONFIG_MM_REGIONS > 1
   up_addregion();
 #endif
 
@@ -142,9 +143,19 @@ void up_initialize(void)
 
   up_irqinitialize();
 
-  /* Initialize the system timer interrupt */
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
 
 #if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* Initialize the system timer interrupt */
+
   up_timer_initialize();
 #endif
 

arch/z80/src/common/up_initialize.c

@@ -52,6 +52,7 @@
 #include <nuttx/syslog/syslog_console.h>
 #include <nuttx/serial/pty.h>
 #include <nuttx/crypto/crypto.h>
+#include <nuttx/power/pm.h>
 
 #include <arch/board/board.h>
 
@@ -121,9 +122,9 @@ void up_initialize(void)
 
   up_calibratedelay();
 
+#if CONFIG_MM_REGIONS > 1
   /* Add any extra memory fragments to the memory manager */
 
-#if CONFIG_MM_REGIONS > 1
   up_addregion();
 #endif
 
@@ -131,9 +132,19 @@ void up_initialize(void)
 
   up_irqinitialize();
 
-  /* Initialize the system timer interrupt */
+#ifdef CONFIG_PM
+  /* Initialize the power management subsystem.  This MCU-specific function
+   * must be called *very* early in the initialization sequence *before* any
+   * other device drivers are initialized (since they may attempt to register
+   * with the power management subsystem).
+   */
+
+  up_pminitialize();
+#endif
 
 #if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* Initialize the system timer interrupt */
+
   up_timer_initialize();
 #endif