sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add NX configuration

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3165 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-12-06 05:15:14 +00:00
parent d7780dba29
commit 7b8f5e79b5
2 changed files with 53 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Documentation/NuttX.html
View File

@ -1287,8 +1287,9 @@
Verified configurations are now available for the NuttX OS test,
for the NuttShell (NSH, see the <a href="ttp://www.nuttx.org/NuttShell.html">NSH User Guide</a>),
for the NuttX network test, and for the <a href="http://acme.com/software/thttpd">THTTPD</a> webserver.
(Additional USB configurations are in the release as well, but those have not yet been verified).
Goals for NuttX-5.15 (and beyond) include: (1) Verified USB support, (2) SD card support, and (3) LCD support.
Additional drivers for USB device and MicroSD has also be added and verified are available in CVS;
A driver for the Nokia 6100 LCD has been added and is under test now.
All are expected to be released in NuttX-5.15.
</p>
<p>
<b>Development Environments:</b>
@ -2010,11 +2011,16 @@ nuttx-5.15 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
out-of-band bit to specify if the next word sent to the device is a command
or data. This is typical, for example, in "9-bit" displays where the 9th bit
is the CMD/DATA bit. The cmddata method provides selection of command or data.
* drivers/lcd/p14201.c -- Now used the cmddata() method of the SPI interface.
* arch/arm/src/lpc17xx/lpc17_usbdev.c -- LPC17xx USB driver is not functional.
* drivers/lcd/p14201.c -- Now uses the cmddata() method of the SPI interface.
* arch/arm/src/lpc17xx/lpc17_usbdev.c -- LPC17xx USB driver now appears to
to be fully functional. examples/usbstorage configuration verified (the
examples/usbserial configuration is untested).
* drivers/usbdev/usbserial.c and usbstorage.c -- All USB class drivers need
to call DEV_CONNECT() when they are ready to be enumerated. That is,
(1) initially when bound to the USB driver, and (2) after a USB reset.
* drivers/lcd/nokia6100.c -- A driver for the Nokia 6100 LCD.
* configs/olimex-lpc1766stk/nx -- A NX graphics configuration for the Olimex
LPC1766-STK board using the Nokia 6100 LCD driver.
pascal-2.1 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;

44
Documentation/NuttxPortingGuide.html
View File

@ -12,7 +12,7 @@
<h1><big><font color="#3c34ec">
<i>NuttX RTOS Porting Guide</i>
</font></big></h1>
<p>Last Updated: September 11, 2010</p>
<p>Last Updated: December 4, 2010</p>
</td>
</tr>
</table>
@ -2814,6 +2814,48 @@ build
</li>
</ul>
<h3>Nokia 6100 Configuration Settings:</h3>
<ul>
<li>
<code>CONFIG_NOKIA6100_SPIMODE</code>: Controls the SPI mode,
</li>
<li>
<code>CONFIG_NOKIA6100_FREQUENCY</code>: Define to use a different bus frequency.
</li>
<li>
<code>CONFIG_NOKIA6100_NINTERFACES</code>:Specifies the number of physical Nokia
6100 devices that will be supported.
</li>
<li>
<code>CONFIG_NOKIA6100_BPP</code>: Device supports 8, 12, and 16 bits per pixel.
</li>
<li>
<code>CONFIG_NOKIA6100_S1D15G10</code>: Selects the Epson S1D15G10 display controller
</li>
<li>
<code>CONFIG_NOKIA6100_PCF8833</code>: Selects the Phillips PCF8833 display controller
</li>
<li>
<code>CONFIG_NOKIA6100_BLINIT</code>: Initial backlight setting
</li>
<p>
Required LCD driver settings:
</p>
<li>
<code>CONFIG_LCD_NOKIA6100</code>: Enable Nokia 6100 support
</li>
<li>
<code>CONFIG_LCD_MAXCONTRAST</code>: Must be 63 with the Epson controller and 127 with
the Phillips controller.
</li>
<li>
<code>CONFIG_LCD_MAXPOWER</code>:Maximum value of backlight setting. The backlight
control is managed outside of the 6100 driver so this value has no
meaning to the driver. Board-specific logic may place restrictions on
this value.
</li>
</ul>
<h3>ENC28J60 Ethernet Driver Configuration Settings</h3>
<ul>
<li>