sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

LPC1788 updates from Rommel Marcelo; NUC120 updates

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5658 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2013-02-17 23:53:44 +00:00
parent 877ad54e96
commit 7c919b80a1
13 changed files with 591 additions and 141 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
configs/lincoln60/include/board.h
View File

@ -124,8 +124,8 @@
/* FLASH Configuration */
#undef CONFIG_LP17_FLASH
#define CONFIG_LP17_FLASH 1
#undef CONFIG_LPC17_FLASH
#define CONFIG_LPC17_FLASH 1
#define BOARD_FLASHCFG_VALUE 0x0000303a
/* LED definitions *********************************************************/

4
configs/lpcxpresso-lpc1768/include/board.h
View File

@ -119,8 +119,8 @@
/* FLASH Configuration */
#undef CONFIG_LP17_FLASH
#define CONFIG_LP17_FLASH 1
#undef CONFIG_LPC17_FLASH
#define CONFIG_LPC17_FLASH 1
#define BOARD_FLASHCFG_VALUE 0x0000303a
/* Ethernet configuration */

4
configs/mbed/include/board.h
View File

@ -119,8 +119,8 @@
/* FLASH Configuration */
#undef CONFIG_LP17_FLASH
#define CONFIG_LP17_FLASH 1
#undef CONFIG_LPC17_FLASH
#define CONFIG_LPC17_FLASH 1
#define BOARD_FLASHCFG_VALUE 0x0000303a
/* LED definitions ******************************************************************/

4
configs/nucleus2g/include/board.h
View File

@ -119,8 +119,8 @@
/* FLASH Configuration */
#undef CONFIG_LP17_FLASH
#define CONFIG_LP17_FLASH 1
#undef CONFIG_LPC17_FLASH
#define CONFIG_LPC17_FLASH 1
#define BOARD_FLASHCFG_VALUE 0x0000303a
/* LED definitions ******************************************************************/

0
configs/nutiny-nuc120/include/Makefile
View File

40
configs/nutiny-nuc120/include/board.h
View File

@ -34,8 +34,8 @@
*
************************************************************************************/
#ifndef _BITNO
#define _BITNO
#ifndef __CONFIGS_NUTINY_NUC12_INCLUDE_BOARD_H
#define __CONFIGS_NUTINY_NUC12_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
@ -54,18 +54,11 @@
/* LED definitions ******************************************************************/
/* The NuTiny has a single green LED that can be controlled from sofware. This LED
* is connected to PIN17.
* is connected to PIN17. It is pulled high so a low value will illuminate the LED.
*/
/* LED index values for use with nuc_setled() */
#define BOARD_LED 0 /* Green LED */
#define BOARD_NLEDS 1
/* LED bits for use with nuc_setleds() */
#define BOARD_LED_BIT (1 << BOARD_LED)
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
* NuTiny. The following definitions describe how NuttX controls the LEDs:
*
@ -80,7 +73,7 @@
* LED_SIGNAL In a signal handler LED might glow
* LED_ASSERTION An assertion failed LED ON while handling the assertion
* LED_PANIC The system has crashed LED Blinking at 2Hz
* LED_IDLE STM32 is is sleep mode (Optional, not used)
* LED_IDLE NUC1XX is is sleep mode (Optional, not used)
*/
#define LED_STARTED 0
@ -106,7 +99,8 @@
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
extern "C"
{
#else
#define EXTERN extern
#endif
@ -118,29 +112,13 @@ extern "C" {
* Name: nuc_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* All NUC1XX architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void nuc_boardinitialize(void);
/************************************************************************************
* Name: nuc_ledinit, nuc_setled, and nuc_setleds
*
* Description:
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs. If
* CONFIG_ARCH_LEDS is not defined, then the following interfacesare available to
* control the LEDs from user applications.
*
************************************************************************************/
#ifndef CONFIG_ARCH_LEDS
EXTERN void nuc_ledinit(void);
EXTERN void nuc_setled(int led, bool ledon);
EXTERN void nuc_setleds(uint8_t ledset);
#endif
void nuc_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
@ -148,4 +126,4 @@ EXTERN void nuc_setleds(uint8_t ledset);
#endif
#endif /* __ASSEMBLY__ */
#endif /* _BITNO */
#endif /* __CONFIGS_NUTINY_NUC12_INCLUDE_BOARD_H */

116
configs/nutiny-nuc120/src/Makefile Normal file
View File

@ -0,0 +1,116 @@
############################################################################
# configs/nutiny-nuc120/src/Makefile
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = nuc_boardinitialize.c
ifeq ($(CONFIG_HAVE_CXX),y)
CSRCS += nuc_cxxinitialize.c
endif
ifeq ($(CONFIG_ARCH_LEDS),y)
CSRCS += nuc_led.c
endif
ifeq ($(CONFIG_NUC1XX_USBD),y)
CSRCS += nuc_usbd.c
endif
ifeq ($(CONFIG_PWM),y)
CSRCS += nuc_pwm.c
endif
ifeq ($(CONFIG_QENCODER),y)
CSRCS += nuc_qencoder.c
endif
ifeq ($(CONFIG_WATCHDOG),y)
CSRCS += nuc_watchdog.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += nuc_nsh.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(CONFIG_WINDOWS_NATIVE),y)
CFLAGS += -I$(ARCH_SRCDIR)\chip -I$(ARCH_SRCDIR)\common -I$(ARCH_SRCDIR)\armv7-m
else
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
endif
endif
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
$(call ARCHIVE, $@, $(OBJS))
.depend: Makefile $(SRCS)
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
$(Q) touch $@
depend: .depend
clean:
$(call DELFILE, libboard$(LIBEXT))
$(call CLEAN)
distclean: clean
$(call DELFILE, Make.dep)
$(call DELFILE, .depend)
-include Make.dep

102
configs/nutiny-nuc120/src/nuc_boardinitialize.c Normal file
View File

@ -0,0 +1,102 @@
/************************************************************************************
* configs/nutiny-nuc120/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "nutiny-nuc120.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: nuc_boardinitialize
*
* Description:
* All NUC1XX architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void nuc_boardinitialize(void)
{
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* nuc_spiinitialize() has been brought into the link.
*/
#if defined(CONFIG_NUC1XX_SPI1) || defined(CONFIG_NUC1XX_SPI2) || defined(CONFIG_NUC1XX_SPI3)
if (nuc_spiinitialize)
{
nuc_spiinitialize();
}
#endif
/* Initialize USB if the 1) USB device controller is in the configuration and 2)
* disabled, and 3) the weak function nuc_usbinitialize() has been brought
* into the build. Presumeably either CONFIG_USBDEV is also selected.
*/
#ifdef CONFIG_NUC1XX_USB
if (nuc_usbinitialize)
{
nuc_usbinitialize();
}
#endif
/* Configure on-board LED if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
nuc_ledinit();
#endif
}

132
configs/nutiny-nuc120/src/nuc_led.c Normal file
View File

@ -0,0 +1,132 @@
/****************************************************************************
* configs/nutiny-nuc120/src/up_autoleds.c
* arch/arm/src/board/up_autoleds.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The NuTiny has a single green LED that can be controlled from sofware.
* This LED is connected to PIN17. It is pulled high so a low value will
* illuminate the LED.
*
* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
* NuTiny. The following definitions describe how NuttX controls the LEDs:
*
* SYMBOL Meaning LED state
* Initially all LED is OFF
* ------------------- ----------------------- ------------- ------------
* LED_STARTED NuttX has been started LED ON
* LED_HEAPALLOCATE Heap has been allocated LED ON
* LED_IRQSENABLED Interrupts enabled LED ON
* LED_STACKCREATED Idle stack created LED ON
* LED_INIRQ In an interrupt LED should glow
* LED_SIGNAL In a signal handler LED might glow
* LED_ASSERTION An assertion failed LED ON while handling the assertion
* LED_PANIC The system has crashed LED Blinking at 2Hz
* LED_IDLE NUC1XX is is sleep mode (Optional, not used)
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "nuc_gpio.h"
#include "nutiny-nuc120.h"
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG with
* CONFIG_DEBUG_VERBOSE too)
*/
#undef LED_DEBUG /* Define to enable debug */
#ifdef LED_DEBUG
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
void up_ledinit(void)
{
nuc_configgpio(GPIO_LED);
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
nuc_gpiowrite(GPIO_LED, false);
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
nuc_gpiowrite(GPIO_LED, true);
}
#endif /* CONFIG_ARCH_LEDS */

116
configs/nutiny-nuc120/src/nutiny-nuc120.h Normal file
View File

@ -0,0 +1,116 @@
/****************************************************************************************************
* configs/nutiny-nuc120/src/nutiny-nuc120.h
* arch/arm/src/board/nutiny-nuc120.n
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************************/
#ifndef __CONFIGS_NUTINY_NUC120_SRC_NUTINY_NUC120_H
#define __CONFIGS_NUTINY_NUC120_SRC_NUTINY_NUC120_H
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* Configuration ************************************************************************************/
/* NuTiny-EVB-120 GPIOs *****************************************************************************/
/* The NuTiny has a single green LED that can be controlled from sofware. This LED
* is connected to PIN17. It is pulled high so a low value will illuminate the LED.
*
* If CONFIG_ARCH_LEDs is defined, then NuttX will control the LED on board the
* NuTiny. The following definitions describe how NuttX controls the LEDs:
*
* SYMBOL Meaning LED state
* Initially all LED is OFF
* ------------------- ----------------------- ------------- ------------
* LED_STARTED NuttX has been started LED ON
* LED_HEAPALLOCATE Heap has been allocated LED ON
* LED_IRQSENABLED Interrupts enabled LED ON
* LED_STACKCREATED Idle stack created LED ON
* LED_INIRQ In an interrupt LED should glow
* LED_SIGNAL In a signal handler LED might glow
* LED_ASSERTION An assertion failed LED ON while handling the assertion
* LED_PANIC The system has crashed LED Blinking at 2Hz
* LED_IDLE NUC1XX is is sleep mode (Optional, not used)
*/
/* Button definitions ***************************************************************/
/* The NuTiny has no buttons */
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************************************
* Name: nuc_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the NuTiny-EVB-120 board.
*
****************************************************************************************************/
void weak_function nuc_spiinitialize(void);
/****************************************************************************************************
* Name: nuc_usbinitialize
*
* Description:
* Called from nuc_usbinitialize very early in inialization to setup USB-related
* GPIO pins for the NuTiny-EVB-120 board.
*
****************************************************************************************************/
#ifdef CONFIG_STM32_USB
void weak_function nuc_usbinitialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_NUTINY_NUC120_SRC_NUTINY_NUC120_H */

4
configs/olimex-lpc1766stk/include/board.h
View File

@ -124,8 +124,8 @@
/* FLASH Configuration */
#undef CONFIG_LP17_FLASH
#define CONFIG_LP17_FLASH 1
#undef CONFIG_LPC17_FLASH
#define CONFIG_LPC17_FLASH 1
#define BOARD_FLASHCFG_VALUE 0x0000303a
/* Ethernet configuration */

17
configs/open1788/include/board.h
View File

@ -71,6 +71,7 @@
*/
#define LPC17_CCLK 120000000 /* 120Mhz */
#define LPC17_PCLKDIV 2 /* Peripheral clock = LPC17_CCLK/2 */
/* Select the main oscillator as the frequency source. SYSCLK is then the frequency
* of the main oscillator.
@ -87,7 +88,7 @@
#define BOARD_CCLKCFG_DIVIDER 6
#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_CCLKDIV_SHIFT)
/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
/* PLL0. PLL0 is used to generate the CPU clock (PLLCLK).
*
* Source clock: Main oscillator
* PLL0 Multiplier value (M): 10
@ -106,7 +107,6 @@
(((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLLCFG_MSEL_SHIFT) | \
((BOARD_PLL0CFG_PSEL-1) << SYSCON_PLLCFG_PSEL_SHIFT))
#ifdef (CONFIG_LPC17_USBHOST || CONFIG_LPC17_USBDEV)
/* PLL1 : PLL1 is used to generate clock for the USB */
#undef CONFIG_LPC17_PLL1
@ -115,7 +115,9 @@
#define BOARD_PLL1CFG_PSEL 2
#define BOARD_PLL1CFG_VALUE \
(((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLLCFG_MSEL_SHIFT) | \
((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLLCFG_PSEL_SHIFT))
((BOARD_PLL1CFG_PSEL-1) << SYSCON_PLLCFG_PSEL_SHIFT))
#if defined(CONFIG_LPC17_USBHOST) || (CONFIG_LPC17_USBDEV)
/* USB divider. The output of the PLL is used as the USB clock
*
@ -128,8 +130,8 @@
/* FLASH Configuration */
#undef CONFIG_LP17_FLASH
#define CONFIG_LP17_FLASH 1
#undef CONFIG_LPC17_FLASH
#define CONFIG_LPC17_FLASH 1
/* Flash access use 6 CPU clocks - Safe for any allowed conditions */
@ -137,7 +139,6 @@
/* Ethernet configuration */
//#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV44
#define ETH_MCFG_CLKSEL_DIV ETH_MCFG_CLKSEL_DIV20
/* Set EMC delay values:
@ -256,6 +257,10 @@
/* Alternate pin selections *********************************************************/
#define GPIO_UART0_TXD GPIO_UART0_TXD_1
#define GPIO_UART0_RXD GPIO_UART0_RXD_1
/************************************************************************************
* Public Types
************************************************************************************/

11
configs/open1788/scripts/ld.script
View File

@ -39,8 +39,9 @@
* 0x10000000 and 32Kb of Peripheral SRAM in two banks, 8Kb at addresses
* 0x20000000 bank0 first and 8kb at 0x20020000 at bank0 second. And 16Kb
* at 0x20040000 on bank1.
* Here we assume that .data and .bss will all fit
* into the 64Kb CPU SRAM address range.
*
* Here we assume that .data and .bss will all fit into the 64Kb CPU SRAM
* address range.
*/
MEMORY
@ -104,7 +105,7 @@ SECTIONS
*(COMMON)
_ebss = ABSOLUTE(.);
} > SRAM
/*
.psram0 (NOLOAD) :
{
*(.psram0)
@ -114,10 +115,10 @@ SECTIONS
.psram1 (NOLOAD) :
{
*(.psram0)
*(.psram1)
. = ALIGN(4)
} > PSRAM1
*/
/* Stabs debugging sections */
.stab 0 : { *(.stab) }