viewtool-stm32f107: Replace old stm32_appinit.c (now stm32_bringup.c) with 'standard' stm32_appinit.c from the STM32F4-Discovery. Add CONFIG_BOARD_INITIALIZE logic to stm32_boot.c

configs/viewtool-stm32f107/src/stm32_appinit.c

@@ -0,0 +1,94 @@
+/****************************************************************************
+ * config/viewtool-stm32f107/src/stm32_appinit.c
+ *
+ *   Copyright (C) 2017 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <nuttx/board.h>
+
+#include "viewtool_stm32f107.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#ifndef OK
+#  define OK 0
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+int board_app_initialize(uintptr_t arg)
+{
+#ifdef CONFIG_BOARD_INITIALIZE
+  /* Board initialization already performed by board_initialize() */
+
+  return OK;
+#else
+  /* Perform board-specific initialization */
+
+  return stm32_bringup();
+#endif
+}

configs/viewtool-stm32f107/src/stm32_boot.c

@@ -87,3 +87,25 @@ void stm32_boardinitialize(void)
 
   stm32_led_initialize();
 }
+
+/****************************************************************************
+ * Name: board_initialize
+ *
+ * Description:
+ *   If CONFIG_BOARD_INITIALIZE is selected, then an additional
+ *   initialization call will be performed in the boot-up sequence to a
+ *   function called board_initialize().  board_initialize() will be
+ *   called immediately after up_initialize() is called and just before the
+ *   initial application is started.  This additional initialization phase
+ *   may be used, for example, to initialize board-specific device drivers.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_BOARD_INITIALIZE
+void board_initialize(void)
+{
+  /* Perform board-specific initialization */
+
+  (void)stm32_bringup();
+}
+#endif