sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers

Browse Source
This commit is contained in:
Gregory Nutt 2015-01-01 12:28:46 -06:00
parent 47480b4696
commit 7fbd970ed6
12 changed files with 113 additions and 80 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
configs/dk-tm4c129x/src/Makefile
View File

@ -51,6 +51,10 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += tm4c_buttons.c
endif
ifeq ($(CONFIG_TIVA_ETHERNET),y)
CSRCS += tm4c_ethernet.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += tm4c_nsh.c
endif

99
configs/dk-tm4c129x/src/tm4c_ethernet.c Normal file
View File

@ -0,0 +1,99 @@
/************************************************************************************
* configs/dk-tm4c129x/src/tm4c_ethernet.c
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <debug.h>
#include <assert.h>
#include <arch/board/board.h>
#include <net/ethernet.h>
#include "up_arch.h"
#include "chip.h"
#include "chip/tiva_flash.h"
#include "tiva_ethernet.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: tiva_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_TIVA_BOARDMAC
void tiva_ethernetmac(struct ether_addr *ethaddr)
{
uint32_t user0;
uint32_t user1;
/* Get the current value of the user registers */
user0 = getreg32(TIVA_FLASH_USERREG0);
user1 = getreg32(TIVA_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);
/* Re-format that MAC address the way that uIP expects to see it */
ethaddr->ether_addr_octet[0] = ((user0 >> 0) & 0xff);
ethaddr->ether_addr_octet[1] = ((user0 >> 8) & 0xff);
ethaddr->ether_addr_octet[2] = ((user0 >> 16) & 0xff);
ethaddr->ether_addr_octet[3] = ((user1 >> 0) & 0xff);
ethaddr->ether_addr_octet[4] = ((user1 >> 8) & 0xff);
ethaddr->ether_addr_octet[5] = ((user1 >> 16) & 0xff);
}
#endif

15
configs/eagle100/include/board.h
View File

@ -123,20 +123,5 @@
void tiva_boardinitialize(void);
/************************************************************************************
* Name: tiva_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

3
configs/eagle100/src/up_ethernet.c
View File

@ -49,9 +49,10 @@
#include "up_arch.h"
#include "chip.h"
#include "tiva_ethernet.h"
/************************************************************************************
* Definitions
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************

15
configs/ekk-lm3s9b96/include/board.h
View File

@ -124,20 +124,5 @@
void tiva_boardinitialize(void);
/************************************************************************************
* Name: tiva_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

3
configs/ekk-lm3s9b96/src/up_ethernet.c
View File

@ -50,9 +50,10 @@
#include "up_arch.h"
#include "chip.h"
#include "tiva_ethernet.h"
/************************************************************************************
* Definitions
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************

15
configs/lm3s6432-s2e/include/board.h
View File

@ -125,20 +125,5 @@
void tiva_boardinitialize(void);
/************************************************************************************
* Name: tiva_ethernetmac
*
* Description:
* For the MDL-S2E Reference Design, the MAC address will be stored in the
* non-volatile USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined,
* this function will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

3
configs/lm3s6432-s2e/src/up_ethernet.c
View File

@ -49,9 +49,10 @@
#include "up_arch.h"
#include "chip.h"
#include "tiva_ethernet.h"
/************************************************************************************
* Definitions
* Pre-processor oDefinitions
************************************************************************************/
/************************************************************************************

15
configs/lm3s6965-ek/include/board.h
View File

@ -123,20 +123,5 @@
void tiva_boardinitialize(void);
/************************************************************************************
* Name: tiva_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

3
configs/lm3s6965-ek/src/up_ethernet.c
View File

@ -49,9 +49,10 @@
#include "up_arch.h"
#include "chip.h"
#include "tiva_ethernet.h"
/************************************************************************************
* Definitions
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************

15
configs/lm3s8962-ek/include/board.h
View File

@ -123,20 +123,5 @@
void tiva_boardinitialize(void);
/************************************************************************************
* Name: tiva_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

3
configs/lm3s8962-ek/src/up_ethernet.c
View File

@ -49,9 +49,10 @@
#include "up_arch.h"
#include "chip.h"
#include "tiva_ethernet.h"
/************************************************************************************
* Definitions
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************