sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

boards/arm/stm32f7/stm32f769i-disco: Apply NxStyle fixes

Browse Source
This commit is contained in:
Gustavo Henrique Nihei 2020-06-23 18:09:20 -03:00 committed by Alan Carvalho de Assis
parent 105d561a51
commit 807c1df498
2 changed files with 33 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
boards/arm/stm32f7/stm32f769i-disco/src/stm32_boot.c
View File

@ -63,9 +63,10 @@
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
* All STM32 architectures must provide the following entry point.
* This entry point is called early in the initialization -- after all
* memory has been configured and mapped but before any devices have been
* initialized.
*
****************************************************************************/
@ -74,8 +75,8 @@ void stm32_boardinitialize(void)
#if defined(CONFIG_STM32F7_SPI1) || defined(CONFIG_STM32F7_SPI2) || \
defined(CONFIG_STM32F7_SPI3) || defined(CONFIG_STM32F7_SPI4) || \
defined(CONFIG_STM32F7_SPI5)
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* stm32_spidev_initialize() has been brought into the link.
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak
* function stm32_spidev_initialize() has been brought into the link.
*/
if (stm32_spidev_initialize)
@ -85,7 +86,8 @@ void stm32_boardinitialize(void)
#endif
#ifdef CONFIG_SPORADIC_INSTRUMENTATION
/* This configuration has been used for evaluating the NuttX sporadic scheduler.
/* This configuration has been used for evaluating the NuttX sporadic
* scheduler.
* The following call initializes the sporadic scheduler monitor.
*/
@ -107,12 +109,13 @@ void stm32_boardinitialize(void)
* Name: board_late_initialize
*
* Description:
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional initialization call
* will be performed in the boot-up sequence to a function called
* board_late_initialize(). board_late_initialize() will be called immediately after
* up_initialize() is called and just before the initial application is started.
* This additional initialization phase may be used, for example, to initialize
* board-specific device drivers.
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_late_initialize().
* board_late_initialize() will be called immediately after up_initialize()
* is called and just before the initial application is started.
* This additional initialization phase may be used, for example, to
* initialize board-specific device drivers.
*
****************************************************************************/

29
boards/arm/stm32f7/stm32f769i-disco/src/stm32f769i-disco.h
View File

@ -47,6 +47,7 @@
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* procfs File System */
#ifdef CONFIG_FS_PROCFS
@ -61,24 +62,27 @@
/* The STM32F769I-DISCO has one user controllable LED: LD3.
*
* LD3 is controlled by PA12 which is also the SPI2_SCK at the Arduino interface.
* LD3 is controlled by PA12 which is also the SPI2_SCK at the Arduino
* interface.
* LD3 is on when PA12 is high.
*/
#define GPIO_LD3 (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_50MHz | GPIO_OUTPUT_CLEAR | \
GPIO_PORTA | GPIO_PIN12)
/* Pushbutton B1, labelled "User", is connected to GPIO PA0. A high value will be sensed when the
* button is depressed. Note that the EXTI interrupt is configured.
/* Pushbutton B1, labelled "User", is connected to GPIO PA0.
* A high value will be sensed when the button is depressed.
* Note that the EXTI interrupt is configured.
*/
#define GPIO_BTN_USER (GPIO_INPUT | GPIO_FLOAT | GPIO_EXTI | GPIO_PORTA | GPIO_PIN0)
/* Sporadic scheduler instrumentation.
* This configuration has been used for evaluating the NuttX sporadic scheduler.
* In this evaluation, two GPIO outputs are used. One indicating the priority
* (high or low) of the sporadic thread and one indicating where the thread is
* running or not.
* This configuration has been used for evaluating the NuttX sporadic
* scheduler.
* In this evaluation, two GPIO outputs are used. One indicating the priority
* (high or low) of the sporadic thread and one indicating where the thread
* is running or not.
*
* There is nothing special about the pin selections:
*
@ -93,7 +97,8 @@
/* PWM
*
* The STM32F769 Discovery can be configured to output a pulse train using TIM1 CH4 on PA11.
* The STM32F769 Discovery can be configured to output a pulse train using
* TIM1 CH4 on PA11.
*/
#define STM32F769I_DISCO_PWMTIMER 1
@ -106,7 +111,7 @@
#ifndef __ASSEMBLY__
/****************************************************************************
* Public Functions
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
@ -141,7 +146,8 @@ int stm32_pwm_setup(void);
* Name: stm32_spidev_initialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the stm32f769i-disco board.
* Called to configure SPI chip select GPIO pins for the stm32f769i-disco
* board.
*
****************************************************************************/
@ -151,7 +157,8 @@ void weak_function stm32_spidev_initialize(void);
* Name: arch_sporadic_initialize
*
* Description:
* This configuration has been used for evaluating the NuttX sporadic scheduler.
* This configuration has been used for evaluating the NuttX sporadic
* scheduler.
*
****************************************************************************/