Create an STM32F4Discovery configuration for testing uClibc++
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5300 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
0b3d2b3e4b
commit
824fbb092d
@ -3554,3 +3554,11 @@
|
||||
expects. That is usually the case if parameters are passed in
|
||||
registers.
|
||||
* libxx/libxx_cxa_atexit(): Implements __cxa_atexit()
|
||||
* configs/stm32f4discovery/cxxtest: New test that will be used to
|
||||
verify the uClibc++ port (eventually). The sim platform turned not
|
||||
to be a good platform for testing uClibc++. The sim example will not
|
||||
run because the simulator will attempt to execute the static
|
||||
constructors before main() starts. BUT... NuttX is not initialized
|
||||
and this results in a crash. On the STM324Discovery, I will have
|
||||
better control over when the static constructors run.
|
||||
|
||||
|
||||
@ -36,58 +36,61 @@
|
||||
-include $(TOPDIR)/Make.defs
|
||||
-include chip/Make.defs
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(CONFIG_ARCH_CORTEXM3),y) # Cortex-M3 is ARMv7-M
|
||||
ARCH_SUBDIR = armv7-m
|
||||
ARCH_SUBDIR = armv7-m
|
||||
else
|
||||
ifeq ($(CONFIG_ARCH_CORTEXM4),y) # Cortex-M4 is ARMv7E-M
|
||||
ARCH_SUBDIR = armv7-m
|
||||
ARCH_SUBDIR = armv7-m
|
||||
else
|
||||
ARCH_SUBDIR = arm
|
||||
ARCH_SUBDIR = arm
|
||||
endif
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
NUTTX = "${shell cygpath -w $(TOPDIR)/nuttx}"
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}" \
|
||||
-I "${shell cygpath -w $(TOPDIR)/sched}"
|
||||
NUTTX = "${shell cygpath -w $(TOPDIR)/nuttx}"
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/$(ARCH_SUBDIR)}" \
|
||||
-I "${shell cygpath -w $(TOPDIR)/sched}"
|
||||
else
|
||||
NUTTX = $(TOPDIR)/nuttx
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common \
|
||||
-I$(ARCH_SRCDIR)/$(ARCH_SUBDIR) -I$(TOPDIR)/sched
|
||||
NUTTX = $(TOPDIR)/nuttx
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common \
|
||||
-I$(ARCH_SRCDIR)/$(ARCH_SUBDIR) -I$(TOPDIR)/sched
|
||||
endif
|
||||
|
||||
HEAD_OBJ = $(HEAD_ASRC:.S=$(OBJEXT))
|
||||
HEAD_OBJ = $(HEAD_ASRC:.S=$(OBJEXT))
|
||||
|
||||
ASRCS = $(CHIP_ASRCS) $(CMN_ASRCS)
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
ASRCS = $(CHIP_ASRCS) $(CMN_ASRCS)
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = $(CHIP_CSRCS) $(CMN_CSRCS)
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
CSRCS = $(CHIP_CSRCS) $(CMN_CSRCS)
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
LDFLAGS = $(ARCHSCRIPT)
|
||||
EXTRA_LIBS ?=
|
||||
LDFLAGS = $(ARCHSCRIPT)
|
||||
|
||||
LINKLIBS =
|
||||
EXTRA_LIBS ?=
|
||||
EXTRA_LIBPATHS ?=
|
||||
|
||||
LINKLIBS =
|
||||
ifeq ($(WINTOOL),y)
|
||||
LIBPATHS = ${shell for path in $(LINKLIBS); do dir=`dirname $(TOPDIR)/$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
|
||||
LIBPATHS += -L"${shell cygpath -w $(BOARDDIR)}"
|
||||
LIBPATHS = ${shell for path in $(LINKLIBS); do dir=`dirname $(TOPDIR)/$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
|
||||
LIBPATHS += -L"${shell cygpath -w $(BOARDDIR)}"
|
||||
else
|
||||
LIBPATHS = $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
|
||||
LIBPATHS += -L"$(BOARDDIR)"
|
||||
LIBPATHS = $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
|
||||
LIBPATHS += -L"$(BOARDDIR)"
|
||||
endif
|
||||
LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
|
||||
LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
|
||||
|
||||
BOARDDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
|
||||
BOARDDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src/board
|
||||
|
||||
LIBGCC = "${shell $(CC) $(ARCHCPUFLAGS) -print-libgcc-file-name}"
|
||||
LIBGCC = "${shell $(CC) $(ARCHCPUFLAGS) -print-libgcc-file-name}"
|
||||
GCC_LIBDIR := ${shell dirname $(LIBGCC)}
|
||||
|
||||
VPATH = chip:common:$(ARCH_SUBDIR)
|
||||
VPATH = chip:common:$(ARCH_SUBDIR)
|
||||
|
||||
all: $(HEAD_OBJ) libarch$(LIBEXT)
|
||||
|
||||
@ -101,7 +104,7 @@ $(COBJS): %$(OBJEXT): %.c
|
||||
|
||||
libarch$(LIBEXT): $(OBJS)
|
||||
$(Q) ( for obj in $(OBJS) ; do \
|
||||
$(call ARCHIVE, $@, $${obj}); \
|
||||
$(call ARCHIVE, $@, $${obj}); \
|
||||
done ; )
|
||||
|
||||
board/libboard$(LIBEXT):
|
||||
@ -109,7 +112,8 @@ board/libboard$(LIBEXT):
|
||||
|
||||
nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
|
||||
$(Q) echo "LD: nuttx"
|
||||
$(Q) $(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) -o $(NUTTX)$(EXEEXT) $(HEAD_OBJ) $(EXTRA_OBJS) \
|
||||
$(Q) $(LD) --entry=__start $(LDFLAGS) $(LIBPATHS) $(EXTRA_LIBPATHS) \
|
||||
-o $(NUTTX)$(EXEEXT) $(HEAD_OBJ) $(EXTRA_OBJS) \
|
||||
--start-group $(LDLIBS) -lboard $(EXTRA_LIBS) $(LIBGCC) --end-group
|
||||
$(Q) $(NM) $(NUTTX)$(EXEEXT) | \
|
||||
grep -v '\(compiled\)\|\(\$(OBJEXT)$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
|
||||
@ -122,10 +126,10 @@ nuttx: $(HEAD_OBJ) board/libboard$(LIBEXT)
|
||||
export_head: board/libboard$(LIBEXT) $(HEAD_OBJ)
|
||||
ifneq ($(HEAD_OBJ),)
|
||||
$(Q) if [ -d "$(EXPORT_DIR)/startup" ]; then \
|
||||
cp -f $(HEAD_OBJ) "$(EXPORT_DIR)/startup"; \
|
||||
cp -f $(HEAD_OBJ) "$(EXPORT_DIR)/startup"; \
|
||||
else \
|
||||
echo "$(EXPORT_DIR)/startup does not exist"; \
|
||||
exit 1; \
|
||||
echo "$(EXPORT_DIR)/startup does not exist"; \
|
||||
exit 1; \
|
||||
fi
|
||||
endif
|
||||
|
||||
@ -133,7 +137,7 @@ endif
|
||||
|
||||
.depend: Makefile chip/Make.defs $(SRCS)
|
||||
$(Q) if [ -e board/Makefile ]; then \
|
||||
$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
|
||||
$(MAKE) -C board TOPDIR="$(TOPDIR)" depend ; \
|
||||
fi
|
||||
$(Q) $(MKDEP) --dep-path chip --dep-path common --dep-path $(ARCH_SUBDIR) \
|
||||
$(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
@ -143,14 +147,14 @@ depend: .depend
|
||||
|
||||
clean:
|
||||
$(Q) if [ -e board/Makefile ]; then \
|
||||
$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
|
||||
$(MAKE) -C board TOPDIR="$(TOPDIR)" clean ; \
|
||||
fi
|
||||
$(Q) rm -f libarch$(LIBEXT) *~ .*.swp
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
$(Q) if [ -e board/Makefile ]; then \
|
||||
$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
|
||||
$(MAKE) -C board TOPDIR="$(TOPDIR)" distclean ; \
|
||||
fi
|
||||
$(Q) rm -f Make.dep .depend
|
||||
|
||||
|
||||
@ -101,6 +101,7 @@ endif
|
||||
endif
|
||||
|
||||
EXTRA_LIBS ?=
|
||||
EXTRA_LIBPATHS ?=
|
||||
|
||||
ifeq ($(CONFIG_FS_FAT),y)
|
||||
STDLIBS += -lz
|
||||
@ -108,9 +109,6 @@ endif
|
||||
|
||||
STDLIBS += -lc
|
||||
|
||||
LIBGCC := "${shell $(CC) $(ARCHCPUFLAGS) -print-libgcc-file-name}"
|
||||
GCC_LIBDIR := ${shell dirname $(LIBGCC)}
|
||||
|
||||
# Determine which objects are required in the link. The
|
||||
# up_head object normally draws in all that is needed, but
|
||||
# there are a fews that must be included because they
|
||||
@ -134,7 +132,7 @@ LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
|
||||
|
||||
# Add the board-specific library and directory
|
||||
|
||||
LDPATHS += -L board -L $(GCC_LIBDIR)
|
||||
LDPATHS += -L board
|
||||
LDLIBS += -lboard
|
||||
|
||||
# Make targets begin here
|
||||
@ -181,7 +179,7 @@ Cygwin-names.dat: nuttx-names.dat
|
||||
|
||||
nuttx.rel : libarch$(LIBEXT) board/libboard$(LIBEXT) $(HOSTOS)-names.dat $(LINKOBJS)
|
||||
$(Q) echo "LD: nuttx.rel"
|
||||
$(Q) $(LD) -r $(LDLINKFLAGS) $(LDPATHS) -o $@ $(REQUIREDOBJS) --start-group $(LDLIBS) $(EXTRA_LIBS) --end-group
|
||||
$(Q) $(LD) -r $(LDLINKFLAGS) $(LDPATHS) $(EXTRA_LIBPATHS) -o $@ $(REQUIREDOBJS) --start-group $(LDLIBS) $(EXTRA_LIBS) --end-group
|
||||
$(Q) $(OBJCOPY) --redefine-syms=$(HOSTOS)-names.dat $@
|
||||
|
||||
# Generate the final NuttX binary by linking the host-specific objects with the NuttX
|
||||
|
||||
@ -215,18 +215,18 @@ cxxtest
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
3. At presenet (2012/11/02), this example builds only with exceptions
|
||||
3. At present (2012/11/02), this example builds only with exceptions
|
||||
disabled (CONFIG_UCLIBCXX_EXCEPTIONS=n). And even then, it will
|
||||
not run.
|
||||
|
||||
The reason that the example will will not run on the simulator has
|
||||
The reason that the example will not run on the simulator has
|
||||
to do with when static constructors are enabled: In the simulator
|
||||
it will attempt to execute the static constructros before main()
|
||||
it will attempt to execute the static constructors before main()
|
||||
starts. BUT... NuttX is not initialized and this results in a crash.
|
||||
|
||||
To really use this example, I will have to think of some way to
|
||||
postpone running C++ static initializers until NuttX has been
|
||||
initialied.
|
||||
initialized.
|
||||
|
||||
mount
|
||||
|
||||
|
||||
@ -93,6 +93,10 @@ LDLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(LD)
|
||||
CCLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(CC)
|
||||
LDFLAGS = $(ARCHSCRIPT) # For backward compatibility, same as CCLINKFLAGS
|
||||
|
||||
LIBSUPXX = ${shell $(CC) --print-file-name=libsupc++.a}
|
||||
EXTRA_LIBPATHS = -L "${shell dirname "$(LIBSUPXX)"}"
|
||||
EXTRA_LIBS = -lsupc++
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDLINKFLAGS += -g
|
||||
CCLINKFLAGS += -g
|
||||
@ -105,8 +109,6 @@ ifeq ($(CONFIG_SIM_M32),y)
|
||||
LDFLAGS += -m32
|
||||
endif
|
||||
|
||||
EXTRA_LIBS = -lsupc++
|
||||
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
|
||||
HOSTCC = gcc
|
||||
|
||||
@ -288,7 +288,7 @@ CONFIG_HAVE_CXX=y
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
CONFIG_UCLIBCXX=y
|
||||
CONFIG_UCLIBCXX_EXCEPTION=y
|
||||
# CONFIG_UCLIBCXX_EXCEPTION is not set
|
||||
CONFIG_UCLIBCXX_IOSTREAM_BUFSIZE=32
|
||||
CONFIG_UCLIBCXX_HAVE_LIBSUPCXX=y
|
||||
|
||||
|
||||
@ -36,76 +36,76 @@
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
|
||||
HOSTOS = ${shell uname -o 2>/dev/null || echo "Other"}
|
||||
HOSTOS = ${shell uname -o 2>/dev/null || echo "Other"}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = -O2
|
||||
ARCHOPTIMIZATION = -O2
|
||||
endif
|
||||
|
||||
ARCHCPUFLAGS = -fno-builtin
|
||||
ARCHCPUFLAGSXX = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHPICFLAGS = -fpic
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHINCLUDESXX = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT =
|
||||
ARCHCPUFLAGS = -fno-builtin
|
||||
ARCHCPUFLAGSXX = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHPICFLAGS = -fpic
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHINCLUDESXX = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT =
|
||||
|
||||
ifeq ($(CONFIG_SIM_M32),y)
|
||||
ARCHCPUFLAGS += -m32
|
||||
ARCHCPUFLAGSXX += -m32
|
||||
ARCHCPUFLAGS += -m32
|
||||
ARCHCPUFLAGSXX += -m32
|
||||
endif
|
||||
|
||||
CROSSDEV =
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
CROSSDEV =
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXFLAGS = $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGSXX) $(ARCHINCLUDESXX) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXFLAGS = $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGSXX) $(ARCHINCLUDESXX) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
|
||||
ifeq ($(HOSTOS),Cygwin)
|
||||
EXEEXT = .exe
|
||||
EXEEXT = .exe
|
||||
else
|
||||
EXEEXT =
|
||||
EXEEXT =
|
||||
endif
|
||||
|
||||
LDLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(LD)
|
||||
CCLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(CC)
|
||||
LDFLAGS = $(ARCHSCRIPT) # For backward compatibility, same as CCLINKFLAGS
|
||||
LDLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(LD)
|
||||
CCLINKFLAGS = $(ARCHSCRIPT) # Link flags used with $(CC)
|
||||
LDFLAGS = $(ARCHSCRIPT) # For backward compatibility, same as CCLINKFLAGS
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDLINKFLAGS += -g
|
||||
CCLINKFLAGS += -g
|
||||
LDFLAGS += -g
|
||||
LDLINKFLAGS += -g
|
||||
CCLINKFLAGS += -g
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_SIM_M32),y)
|
||||
LDLINKFLAGS += -melf_i386
|
||||
CCLINKFLAGS += -m32
|
||||
LDFLAGS += -m32
|
||||
LDLINKFLAGS += -melf_i386
|
||||
CCLINKFLAGS += -m32
|
||||
LDFLAGS += -m32
|
||||
endif
|
||||
|
||||
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(HOSTINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
HOSTLDFLAGS =
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(HOSTINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
@ -982,6 +982,35 @@ can be selected as follow:
|
||||
|
||||
Where <subdir> is one of the following:
|
||||
|
||||
cxxtest:
|
||||
-------
|
||||
|
||||
The C++ standard libary test at apps/examples/cxxtest configuration. This
|
||||
test is used to verify the uClibc++ port to NuttX. This configuration may
|
||||
be selected as follows:
|
||||
|
||||
cd <nuttx-directory>/tools
|
||||
./configure.sh sim/cxxtest
|
||||
|
||||
NOTES:
|
||||
|
||||
1. Before you can use this example, you must first install the uClibc++
|
||||
C++ library. This is located outside of the NuttX source tree at
|
||||
misc/uClibc++ in SVN. See the README.txt file for instructions on
|
||||
how to install uClibc++
|
||||
|
||||
2. This configuration uses the mconf-based configuration tool. To
|
||||
change this configuration using that tool, you should:
|
||||
|
||||
a. Build and install the mconf tool. See nuttx/README.txt and
|
||||
misc/tools/
|
||||
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
3. At present (2012/11/02), this example builds only with exceptions
|
||||
disabled (CONFIG_UCLIBCXX_EXCEPTIONS=n).
|
||||
|
||||
elf:
|
||||
---
|
||||
|
||||
|
||||
184
configs/stm32f4discovery/cxxtest/Make.defs
Normal file
184
configs/stm32f4discovery/cxxtest/Make.defs
Normal file
@ -0,0 +1,184 @@
|
||||
############################################################################
|
||||
# configs/stm32f4discovery/cxxtest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
|
||||
# Setup for the selected toolchain
|
||||
|
||||
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
|
||||
# CodeSourcery under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
|
||||
# CodeSourcery under Linux
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCROSSDEV = arm-none-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_ATOLLIC_LITE),y)
|
||||
# Atollic toolchain under Windows
|
||||
CROSSDEV = arm-atollic-eabi-
|
||||
ARCROSSDEV =
|
||||
WINTOOL = y
|
||||
ifeq ($(CONFIG_ARCH_FPU),y)
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
||||
else
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_ATOLLIC_PRO),y)
|
||||
# Atollic toolchain under Windows
|
||||
CROSSDEV = arm-atollic-eabi-
|
||||
ARCROSSDEV = arm-atollic-eabi-
|
||||
WINTOOL = y
|
||||
ifeq ($(CONFIG_ARCH_FPU),y)
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
|
||||
else
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_DEVKITARM),y)
|
||||
# devkitARM under Windows
|
||||
CROSSDEV = arm-eabi-
|
||||
ARCROSSDEV = arm-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_RAISONANCE),y)
|
||||
# Raisonance RIDE7 under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_BUILDROOT),y)
|
||||
# NuttX buildroot under Linux or Cygwin
|
||||
# OABI
|
||||
# CROSSDEV = arm-nuttx-elf-
|
||||
# ARCROSSDEV = arm-nuttx-elf-
|
||||
# ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
# EABI
|
||||
CROSSDEV = arm-nuttx-eabi-
|
||||
ARCROSSDEV = arm-nuttx-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -Os
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
LDSCRIPT = ld.script
|
||||
LIBSUPXX = ${shell $(CC) --print-file-name=libsupc++.a}
|
||||
EXTRA_LIBPATHS = -L "${shell dirname "$(LIBSUPXX)"}"
|
||||
EXTRA_LIBS = -lsupc++
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" \
|
||||
-isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" \
|
||||
-isystem "${shell cygpath -w $(TOPDIR)/include/uClibc++}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include \
|
||||
-isystem $(TOPDIR)/include/cxx -isystem $(TOPDIR)/include/uClibc++
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ifeq ($(CONFIG_UCLIBCXX_EXCEPTION),y)
|
||||
ARCHCPUFLAGSXX = -fno-builtin
|
||||
else
|
||||
ARCHCPUFLAGSXX = -fno-builtin -fno-exceptions
|
||||
endif
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
573
configs/stm32f4discovery/cxxtest/defconfig
Normal file
573
configs/stm32f4discovery/cxxtest/defconfig
Normal file
@ -0,0 +1,573 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
CONFIG_ARCH_FLOAT_H=y
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_LM3S is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="stm32"
|
||||
# CONFIG_ARCH_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
# CONFIG_SERIAL_TERMIOS is not set
|
||||
|
||||
#
|
||||
# STM32 Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F107VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F207IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405RG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407VE is not set
|
||||
CONFIG_ARCH_CHIP_STM32F407VG=y
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IG is not set
|
||||
CONFIG_STM32_STM32F40XX=y
|
||||
CONFIG_STM32_CODESOURCERYW=y
|
||||
# CONFIG_STM32_CODESOURCERYL is not set
|
||||
# CONFIG_STM32_ATOLLIC_LITE is not set
|
||||
# CONFIG_STM32_ATOLLIC_PRO is not set
|
||||
# CONFIG_STM32_DEVKITARM is not set
|
||||
# CONFIG_STM32_RAISONANCE is not set
|
||||
# CONFIG_STM32_BUILDROOT is not set
|
||||
# CONFIG_STM32_DFU is not set
|
||||
|
||||
#
|
||||
# STM32 Peripheral Support
|
||||
#
|
||||
# CONFIG_STM32_ADC1 is not set
|
||||
# CONFIG_STM32_ADC2 is not set
|
||||
# CONFIG_STM32_ADC3 is not set
|
||||
# CONFIG_STM32_CRC is not set
|
||||
# CONFIG_STM32_DMA1 is not set
|
||||
# CONFIG_STM32_DMA2 is not set
|
||||
# CONFIG_STM32_BKPSRAM is not set
|
||||
# CONFIG_STM32_CAN1 is not set
|
||||
# CONFIG_STM32_CAN2 is not set
|
||||
# CONFIG_STM32_CCMDATARAM is not set
|
||||
# CONFIG_STM32_CRYP is not set
|
||||
# CONFIG_STM32_DAC1 is not set
|
||||
# CONFIG_STM32_DAC2 is not set
|
||||
# CONFIG_STM32_DCMI is not set
|
||||
# CONFIG_STM32_ETHMAC is not set
|
||||
# CONFIG_STM32_FSMC is not set
|
||||
# CONFIG_STM32_HASH is not set
|
||||
# CONFIG_STM32_I2C1 is not set
|
||||
# CONFIG_STM32_I2C2 is not set
|
||||
# CONFIG_STM32_I2C3 is not set
|
||||
# CONFIG_STM32_IWDG is not set
|
||||
# CONFIG_STM32_OTGFS is not set
|
||||
# CONFIG_STM32_OTGHS is not set
|
||||
# CONFIG_STM32_PWR is not set
|
||||
# CONFIG_STM32_RNG is not set
|
||||
# CONFIG_STM32_SDIO is not set
|
||||
# CONFIG_STM32_SPI1 is not set
|
||||
# CONFIG_STM32_SPI2 is not set
|
||||
# CONFIG_STM32_SPI3 is not set
|
||||
CONFIG_STM32_SYSCFG=y
|
||||
# CONFIG_STM32_TIM1 is not set
|
||||
# CONFIG_STM32_TIM2 is not set
|
||||
# CONFIG_STM32_TIM3 is not set
|
||||
# CONFIG_STM32_TIM4 is not set
|
||||
# CONFIG_STM32_TIM5 is not set
|
||||
# CONFIG_STM32_TIM6 is not set
|
||||
# CONFIG_STM32_TIM7 is not set
|
||||
# CONFIG_STM32_TIM8 is not set
|
||||
# CONFIG_STM32_TIM9 is not set
|
||||
# CONFIG_STM32_TIM10 is not set
|
||||
# CONFIG_STM32_TIM11 is not set
|
||||
# CONFIG_STM32_TIM12 is not set
|
||||
# CONFIG_STM32_TIM13 is not set
|
||||
# CONFIG_STM32_TIM14 is not set
|
||||
# CONFIG_STM32_USART1 is not set
|
||||
CONFIG_STM32_USART2=y
|
||||
# CONFIG_STM32_USART3 is not set
|
||||
# CONFIG_STM32_UART4 is not set
|
||||
# CONFIG_STM32_UART5 is not set
|
||||
# CONFIG_STM32_USART6 is not set
|
||||
# CONFIG_STM32_WWDG is not set
|
||||
|
||||
#
|
||||
# Alternate Pin Mapping
|
||||
#
|
||||
# CONFIG_STM32_JTAG_DISABLE is not set
|
||||
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
|
||||
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
|
||||
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||
# CONFIG_STM32_FORCEPOWER is not set
|
||||
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
|
||||
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||
|
||||
#
|
||||
# USB Host Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=114688
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="stm32f4discovery"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
# CONFIG_ARCH_BUTTONS is not set
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2012
|
||||
CONFIG_START_MONTH=11
|
||||
CONFIG_START_DAY=2
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
CONFIG_SCHED_ONEXIT=y
|
||||
CONFIG_SCHED_ONEXIT_MAX=4
|
||||
CONFIG_USER_ENTRYPOINT="cxxtest_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_ARCH_HAVE_I2CRESET=y
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_LOWLEVEL_CONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART2=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_USART2_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART2 Configuration
|
||||
#
|
||||
CONFIG_USART2_RXBUFSIZE=128
|
||||
CONFIG_USART2_TXBUFSIZE=128
|
||||
CONFIG_USART2_BAUD=115200
|
||||
CONFIG_USART2_BITS=8
|
||||
CONFIG_USART2_PARITY=0
|
||||
CONFIG_USART2_2STOP=0
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=256
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIBM=y
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
CONFIG_UCLIBCXX=y
|
||||
# CONFIG_UCLIBCXX_EXCEPTION is not set
|
||||
CONFIG_UCLIBCXX_IOSTREAM_BUFSIZE=32
|
||||
CONFIG_UCLIBCXX_HAVE_LIBSUPCXX=y
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Named Applications
|
||||
#
|
||||
# CONFIG_NAMEDAPP is not set
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CDCACM is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
CONFIG_EXAMPLES_CXXTEST=y
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_NETTEST is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
# CONFIG_EXAMPLES_WLAN is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_FICL is not set
|
||||
# CONFIG_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# ModBus
|
||||
#
|
||||
|
||||
#
|
||||
# FreeModbus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
75
configs/stm32f4discovery/cxxtest/setenv.sh
Executable file
75
configs/stm32f4discovery/cxxtest/setenv.sh
Executable file
@ -0,0 +1,75 @@
|
||||
#!/bin/bash
|
||||
# configs/stm32f4discovery/cxxtest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@ -251,7 +251,7 @@ CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="elf_main"
|
||||
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
|
||||
Loading…
Reference in New Issue
Block a user