Improve and remove not necessary board configuration
This commit is contained in:
Abdelatif Guettouche
Alin Jerpelea
parent
fccd5fbdd2
commit
8347a56bc0
@ -250,6 +250,15 @@ config ARCH_BOARD_ESP32C3_DEVKIT
|
|||||||
The ESP32-C3-DevKitM-1 version contains the ESP32-C3-MINI-1 module and the
|
The ESP32-C3-DevKitM-1 version contains the ESP32-C3-MINI-1 module and the
|
||||||
ESP32-C3-DevKitC-02 version the ESP32-C3-WROOM-02.
|
ESP32-C3-DevKitC-02 version the ESP32-C3-WROOM-02.
|
||||||
|
|
||||||
|
config ARCH_BOARD_ESP32S2_SAOLA_1
|
||||||
|
bool "Espressif ESP32-S2-Saola-1 V1.2"
|
||||||
|
depends on ARCH_CHIP_ESP32S2WROVER
|
||||||
|
select ARCH_HAVE_LEDS
|
||||||
|
select ARCH_HAVE_BUTTONS
|
||||||
|
select ARCH_HAVE_IRQBUTTONS if ESP32S2_GPIO_IRQ
|
||||||
|
---help---
|
||||||
|
This is the ESP32-S2-Saola-1 board
|
||||||
|
|
||||||
config ARCH_BOARD_ET_STM32_STAMP
|
config ARCH_BOARD_ET_STM32_STAMP
|
||||||
bool "Futurlec: ET-STM32 Stamp"
|
bool "Futurlec: ET-STM32 Stamp"
|
||||||
depends on ARCH_CHIP_STM32F103RE
|
depends on ARCH_CHIP_STM32F103RE
|
||||||
@ -2299,6 +2308,7 @@ config ARCH_BOARD
|
|||||||
default "esp32-ethernet-kit" if ARCH_BOARD_ESP32_ETHERNETKIT
|
default "esp32-ethernet-kit" if ARCH_BOARD_ESP32_ETHERNETKIT
|
||||||
default "esp32-wrover-kit" if ARCH_BOARD_ESP32_WROVERKIT
|
default "esp32-wrover-kit" if ARCH_BOARD_ESP32_WROVERKIT
|
||||||
default "esp32c3-devkit" if ARCH_BOARD_ESP32C3_DEVKIT
|
default "esp32c3-devkit" if ARCH_BOARD_ESP32C3_DEVKIT
|
||||||
|
default "esp32s2-saola-1" if ARCH_BOARD_ESP32S2_SAOLA_1
|
||||||
default "et-stm32-stamp" if ARCH_BOARD_ET_STM32_STAMP
|
default "et-stm32-stamp" if ARCH_BOARD_ET_STM32_STAMP
|
||||||
default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG
|
default "ez80f910200kitg" if ARCH_BOARD_EZ80F910200KITG
|
||||||
default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO
|
default "ez80f910200zco" if ARCH_BOARD_EZ80F910200ZCO
|
||||||
@ -3143,6 +3153,9 @@ endif
|
|||||||
if ARCH_BOARD_ESP32C3_DEVKIT
|
if ARCH_BOARD_ESP32C3_DEVKIT
|
||||||
source "boards/risc-v/esp32c3/esp32c3-devkit/Kconfig"
|
source "boards/risc-v/esp32c3/esp32c3-devkit/Kconfig"
|
||||||
endif
|
endif
|
||||||
|
if ARCH_BOARD_ESP32S2_SAOLA_1
|
||||||
|
source "boards/xtensa/esp32s2/esp32s2-saola-1/Kconfig"
|
||||||
|
endif
|
||||||
if ARCH_BOARD_SIM
|
if ARCH_BOARD_SIM
|
||||||
source "boards/sim/sim/sim/Kconfig"
|
source "boards/sim/sim/sim/Kconfig"
|
||||||
endif
|
endif
|
||||||
|
|||||||
@ -1,47 +0,0 @@
|
|||||||
#
|
|
||||||
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
|
||||||
#
|
|
||||||
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
|
||||||
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
|
||||||
# modifications.
|
|
||||||
#
|
|
||||||
# CONFIG_ARCH_LEDS is not set
|
|
||||||
# CONFIG_NSH_ARGCAT is not set
|
|
||||||
# CONFIG_NSH_CMDOPT_HEXDUMP is not set
|
|
||||||
# CONFIG_NSH_CMDPARMS is not set
|
|
||||||
CONFIG_ARCH="xtensa"
|
|
||||||
CONFIG_ARCH_BOARD="esp32s2-saola-1"
|
|
||||||
CONFIG_ARCH_BOARD_ESP32S2_SAOLA_1=y
|
|
||||||
CONFIG_ARCH_CHIP="esp32s2"
|
|
||||||
CONFIG_ARCH_CHIP_ESP32S2=y
|
|
||||||
CONFIG_ARCH_CHIP_ESP32S2WROVER=y
|
|
||||||
CONFIG_ARCH_STACKDUMP=y
|
|
||||||
CONFIG_ARCH_XTENSA=y
|
|
||||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
|
||||||
CONFIG_BUILTIN=y
|
|
||||||
CONFIG_ESP32S2_DATA_CACHE_0KB=y
|
|
||||||
CONFIG_ESP32S2_UART0=y
|
|
||||||
CONFIG_FS_PROCFS=y
|
|
||||||
CONFIG_HAVE_CXX=y
|
|
||||||
CONFIG_HAVE_CXXINITIALIZE=y
|
|
||||||
CONFIG_IDLETHREAD_STACKSIZE=3072
|
|
||||||
CONFIG_INTELHEX_BINARY=y
|
|
||||||
CONFIG_MAX_TASKS=16
|
|
||||||
CONFIG_NSH_ARCHINIT=y
|
|
||||||
CONFIG_NSH_BUILTIN_APPS=y
|
|
||||||
CONFIG_NSH_FILEIOSIZE=512
|
|
||||||
CONFIG_NSH_LINELEN=64
|
|
||||||
CONFIG_NSH_READLINE=y
|
|
||||||
CONFIG_PREALLOC_TIMERS=4
|
|
||||||
CONFIG_RAM_SIZE=114688
|
|
||||||
CONFIG_RAM_START=0x20000000
|
|
||||||
CONFIG_RAW_BINARY=y
|
|
||||||
CONFIG_RR_INTERVAL=200
|
|
||||||
CONFIG_SCHED_WAITPID=y
|
|
||||||
CONFIG_SDCLONE_DISABLE=y
|
|
||||||
CONFIG_START_DAY=6
|
|
||||||
CONFIG_START_MONTH=12
|
|
||||||
CONFIG_START_YEAR=2011
|
|
||||||
CONFIG_SYSTEM_NSH=y
|
|
||||||
CONFIG_UART0_SERIAL_CONSOLE=y
|
|
||||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
|
||||||
@ -31,12 +31,12 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define RAM_IRAM_START 0x40020000
|
#define RAM_IRAM_START 0x40020000
|
||||||
#define RAM_DRAM_START 0x3FFB0000
|
#define RAM_DRAM_START 0x3ffb0000
|
||||||
|
|
||||||
#define DATA_RAM_END 0x3FFE0000 /* 2nd stage bootloader iram_loader_seg
|
#define DATA_RAM_END 0x3ffe0000 /* 2nd stage bootloader iram_loader_seg
|
||||||
* starts at SRAM block 14 (reclaimed
|
* starts at SRAM block 14 (reclaimed
|
||||||
* after app boots)
|
* after app boots)
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#define IRAM_ORG (RAM_IRAM_START + CONFIG_ESP32S2_INSTRUCTION_CACHE_SIZE \
|
#define IRAM_ORG (RAM_IRAM_START + CONFIG_ESP32S2_INSTRUCTION_CACHE_SIZE \
|
||||||
+ CONFIG_ESP32S2_DATA_CACHE_SIZE)
|
+ CONFIG_ESP32S2_DATA_CACHE_SIZE)
|
||||||
@ -46,8 +46,6 @@
|
|||||||
|
|
||||||
#define I_D_RAM_SIZE DATA_RAM_END - DRAM_ORG
|
#define I_D_RAM_SIZE DATA_RAM_END - DRAM_ORG
|
||||||
|
|
||||||
#define STATIC_RAM_SIZE 0 /* FIXME: Should it be configurable? */
|
|
||||||
|
|
||||||
MEMORY
|
MEMORY
|
||||||
{
|
{
|
||||||
/* All these values assume the flash cache is on, and have the blocks this
|
/* All these values assume the flash cache is on, and have the blocks this
|
||||||
@ -75,8 +73,7 @@ MEMORY
|
|||||||
* bss/data/stack.
|
* bss/data/stack.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
dram0_0_seg (RW) : org = DRAM_ORG, len = I_D_RAM_SIZE - \
|
dram0_0_seg (RW) : org = DRAM_ORG, len = I_D_RAM_SIZE
|
||||||
STATIC_RAM_SIZE
|
|
||||||
|
|
||||||
/* Flash mapped constant data */
|
/* Flash mapped constant data */
|
||||||
|
|
||||||
@ -93,16 +90,5 @@ MEMORY
|
|||||||
|
|
||||||
rtc_slow_seg(RW) : org = 0x50000000 + CONFIG_ESP32S2_ULP_COPROC_RESERVE_MEM,
|
rtc_slow_seg(RW) : org = 0x50000000 + CONFIG_ESP32S2_ULP_COPROC_RESERVE_MEM,
|
||||||
len = 0x2000 - CONFIG_ESP32S2_ULP_COPROC_RESERVE_MEM
|
len = 0x2000 - CONFIG_ESP32S2_ULP_COPROC_RESERVE_MEM
|
||||||
|
|
||||||
/* External memory, including data and text */
|
|
||||||
|
|
||||||
extmem_seg(RWX) : org = 0x3f800000, len = 0x400000
|
|
||||||
}
|
}
|
||||||
|
|
||||||
/* Heap ends at top of dram0_0_seg */
|
|
||||||
|
|
||||||
_eheap = 0x40000000 - CONFIG_ESP32S2_TRACEMEM_RESERVE_DRAM;
|
|
||||||
|
|
||||||
/* Module text area ends at top of dram0_0_seg */
|
|
||||||
|
|
||||||
_emodtext = 0x400a0000;
|
|
||||||
|
|||||||
@ -14,7 +14,7 @@ SECTIONS
|
|||||||
{
|
{
|
||||||
_iram_start = ABSOLUTE(.);
|
_iram_start = ABSOLUTE(.);
|
||||||
|
|
||||||
/* Vectors go to IRAM */
|
/* Vectors go to IRAM. */
|
||||||
|
|
||||||
_init_start = ABSOLUTE(.);
|
_init_start = ABSOLUTE(.);
|
||||||
|
|
||||||
@ -47,24 +47,17 @@ SECTIONS
|
|||||||
*(.entry.text)
|
*(.entry.text)
|
||||||
*(.init.literal)
|
*(.init.literal)
|
||||||
*(.init)
|
*(.init)
|
||||||
_init_end = ABSOLUTE(.);
|
|
||||||
} > iram0_0_seg
|
} > iram0_0_seg
|
||||||
|
|
||||||
.iram0.text :
|
.iram0.text :
|
||||||
{
|
{
|
||||||
/* Code marked as running out of IRAM */
|
/* Code marked as running out of IRAM */
|
||||||
|
|
||||||
_iram_text_start = ABSOLUTE(.);
|
|
||||||
*(.iram1 .iram1.*)
|
*(.iram1 .iram1.*)
|
||||||
*librtc.a:(.literal .text .literal.* .text.*)
|
|
||||||
*libarch.a:esp32s2_spiflash.*(.literal .text .literal.* .text.*)
|
|
||||||
*(.wifirxiram .wifirxiram.*)
|
|
||||||
*(.wifi0iram .wifi0iram.*)
|
|
||||||
_iram_text_end = ABSOLUTE(.);
|
|
||||||
|
|
||||||
/* Module text area starts at the end of iram0_0_seg */
|
/* align + add 16B for CPU dummy speculative instr. fetch */
|
||||||
|
|
||||||
_smodtext = ABSOLUTE(.);
|
. = ALIGN(4) + 16;
|
||||||
_iram_text = ABSOLUTE(.);
|
_iram_text = ABSOLUTE(.);
|
||||||
} > iram0_0_seg
|
} > iram0_0_seg
|
||||||
|
|
||||||
@ -95,7 +88,6 @@ SECTIONS
|
|||||||
*(.share.mem)
|
*(.share.mem)
|
||||||
*(.gnu.linkonce.b.*)
|
*(.gnu.linkonce.b.*)
|
||||||
*(COMMON)
|
*(COMMON)
|
||||||
*libarch.a:esp32s2_spiflash.*(.bss .bss.* COMMON)
|
|
||||||
. = ALIGN(8);
|
. = ALIGN(8);
|
||||||
_ebss = ABSOLUTE(.);
|
_ebss = ABSOLUTE(.);
|
||||||
} >dram0_0_seg
|
} >dram0_0_seg
|
||||||
@ -106,7 +98,9 @@ SECTIONS
|
|||||||
* or during the application's initialization sequence.
|
* or during the application's initialization sequence.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
*(.noinit)
|
*(.noinit)
|
||||||
|
. = ALIGN(4);
|
||||||
} >dram0_0_seg
|
} >dram0_0_seg
|
||||||
|
|
||||||
.dram0.data :
|
.dram0.data :
|
||||||
@ -126,8 +120,6 @@ SECTIONS
|
|||||||
KEEP (*(.gnu.linkonce.s2.*))
|
KEEP (*(.gnu.linkonce.s2.*))
|
||||||
KEEP (*(.jcr))
|
KEEP (*(.jcr))
|
||||||
*(.dram1 .dram1.*)
|
*(.dram1 .dram1.*)
|
||||||
*libphy.a:(.rodata .rodata.*)
|
|
||||||
*libarch.a:esp32s2_spiflash.*(.rodata .rodata.*)
|
|
||||||
. = ALIGN(4);
|
. = ALIGN(4);
|
||||||
_edata = ABSOLUTE(.);
|
_edata = ABSOLUTE(.);
|
||||||
|
|
||||||
@ -136,16 +128,6 @@ SECTIONS
|
|||||||
_sheap = ABSOLUTE(.);
|
_sheap = ABSOLUTE(.);
|
||||||
} >dram0_0_seg
|
} >dram0_0_seg
|
||||||
|
|
||||||
/* External memory bss, from any global variable with EXT_RAM_ATTR attribute */
|
|
||||||
|
|
||||||
.extmem.bss (NOLOAD) :
|
|
||||||
{
|
|
||||||
_sbss_extmem = ABSOLUTE(.);
|
|
||||||
*(.extmem.bss .extmem.bss.*)
|
|
||||||
. = ALIGN(4);
|
|
||||||
_ebss_extmem = ABSOLUTE(.);
|
|
||||||
} > extmem_seg
|
|
||||||
|
|
||||||
.flash.rodata :
|
.flash.rodata :
|
||||||
{
|
{
|
||||||
_srodata = ABSOLUTE(.);
|
_srodata = ABSOLUTE(.);
|
||||||
@ -187,7 +169,9 @@ SECTIONS
|
|||||||
*(.dynamic)
|
*(.dynamic)
|
||||||
*(.gnu.version_d)
|
*(.gnu.version_d)
|
||||||
_erodata = ABSOLUTE(.);
|
_erodata = ABSOLUTE(.);
|
||||||
|
|
||||||
/* Literals are also RO data. */
|
/* Literals are also RO data. */
|
||||||
|
|
||||||
_lit4_start = ABSOLUTE(.);
|
_lit4_start = ABSOLUTE(.);
|
||||||
*(*.lit4)
|
*(*.lit4)
|
||||||
*(.lit4.*)
|
*(.lit4.*)
|
||||||
@ -199,13 +183,20 @@ SECTIONS
|
|||||||
.flash.text :
|
.flash.text :
|
||||||
{
|
{
|
||||||
_stext = .;
|
_stext = .;
|
||||||
_text_start = ABSOLUTE(.);
|
|
||||||
*(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
|
*(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
|
||||||
*(.irom0.text) /* catch stray ICACHE_RODATA_ATTR */
|
*(.irom0.text) /* catch stray ICACHE_RODATA_ATTR */
|
||||||
*(.fini.literal)
|
*(.fini.literal)
|
||||||
*(.fini)
|
*(.fini)
|
||||||
*(.gnu.version)
|
*(.gnu.version)
|
||||||
_text_end = ABSOLUTE(.);
|
|
||||||
|
/* CPU will try to prefetch up to 16 bytes of instructions.
|
||||||
|
* This means that any configuration (e.g. MMU, PMS) must allow
|
||||||
|
* safe access to up to 16 bytes after the last real instruction, add
|
||||||
|
* dummy bytes to ensure this
|
||||||
|
*/
|
||||||
|
|
||||||
|
. += 16;
|
||||||
|
|
||||||
_etext = .;
|
_etext = .;
|
||||||
} >iram0_2_seg
|
} >iram0_2_seg
|
||||||
|
|
||||||
|
|||||||
@ -52,27 +52,19 @@ SECTIONS
|
|||||||
{
|
{
|
||||||
/* Code marked as running out of IRAM */
|
/* Code marked as running out of IRAM */
|
||||||
|
|
||||||
_iram_text_start = ABSOLUTE(.);
|
|
||||||
*(.iram1 .iram1.*)
|
*(.iram1 .iram1.*)
|
||||||
*libphy.a:(.literal .text .literal.* .text.*)
|
|
||||||
*librtc.a:(.literal .text .literal.* .text.*)
|
|
||||||
*libpp.a:(.literal .text .literal.* .text.*)
|
|
||||||
*libhal.a:(.literal .text .literal.* .text.*)
|
|
||||||
_iram_text_end = ABSOLUTE(.);
|
|
||||||
|
|
||||||
_stext = .;
|
_stext = .;
|
||||||
_text_start = ABSOLUTE(.);
|
|
||||||
*(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
|
*(.literal .text .literal.* .text.* .stub .gnu.warning .gnu.linkonce.literal.* .gnu.linkonce.t.*.literal .gnu.linkonce.t.*)
|
||||||
*(.irom0.text) /* catch stray ICACHE_RODATA_ATTR */
|
*(.irom0.text) /* catch stray ICACHE_RODATA_ATTR */
|
||||||
*(.fini.literal)
|
*(.fini.literal)
|
||||||
*(.fini)
|
*(.fini)
|
||||||
*(.gnu.version)
|
*(.gnu.version)
|
||||||
_text_end = ABSOLUTE(.);
|
|
||||||
|
/* align + add 16B for CPU dummy speculative instr. fetch */
|
||||||
|
|
||||||
|
. = ALIGN(4) + 16;
|
||||||
_etext = .;
|
_etext = .;
|
||||||
|
|
||||||
/* Module text area starts at the end of iram0_0_seg */
|
|
||||||
|
|
||||||
_smodtext = ABSOLUTE(.);
|
|
||||||
} > iram0_0_seg
|
} > iram0_0_seg
|
||||||
|
|
||||||
/* Shared RAM */
|
/* Shared RAM */
|
||||||
@ -102,7 +94,9 @@ SECTIONS
|
|||||||
|
|
||||||
/* Uninitialized .bss */
|
/* Uninitialized .bss */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
*(.noinit)
|
*(.noinit)
|
||||||
|
. = ALIGN(4);
|
||||||
} >dram0_0_seg
|
} >dram0_0_seg
|
||||||
|
|
||||||
.dram0.data :
|
.dram0.data :
|
||||||
|
|||||||
@ -28,29 +28,6 @@ CSRCS = esp32s2_boot.c esp32s2_bringup.c
|
|||||||
|
|
||||||
ifeq ($(CONFIG_LIB_BOARDCTL),y)
|
ifeq ($(CONFIG_LIB_BOARDCTL),y)
|
||||||
CSRCS += esp32s2_appinit.c
|
CSRCS += esp32s2_appinit.c
|
||||||
ifeq ($(CONFIG_BOARDCTL_RESET),y)
|
|
||||||
CSRCS += esp32s2_reset.c
|
|
||||||
endif
|
|
||||||
endif
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_ESP32S2_SPI),y)
|
|
||||||
CSRCS += esp32s2_spi.c
|
|
||||||
endif
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_ESP32S2_SPIFLASH),y)
|
|
||||||
CSRCS += esp32s2_spiflash.c
|
|
||||||
endif
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_DEV_GPIO),y)
|
|
||||||
CSRCS += esp32s2_gpio.c
|
|
||||||
endif
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_USERLED),y)
|
|
||||||
CSRCS += esp32s2_userleds.c
|
|
||||||
endif
|
|
||||||
|
|
||||||
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
|
||||||
CSRCS += esp32s2_buttons.c
|
|
||||||
endif
|
endif
|
||||||
|
|
||||||
SCRIPTIN = $(SCRIPTDIR)$(DELIM)esp32s2.template.ld
|
SCRIPTIN = $(SCRIPTDIR)$(DELIM)esp32s2.template.ld
|
||||||
|
|||||||
@ -18,8 +18,8 @@
|
|||||||
*
|
*
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
#ifndef __BOARDS_XTENSA_ESP32S2_ESP32S2_CORE_SRC_ESP32S2_CORE_H
|
#ifndef __BOARDS_XTENSA_ESP32S2_ESP32S2_SAOLA_1_SRC_ESP32S2_SAOLA_1_H
|
||||||
#define __BOARDS_XTENSA_ESP32S2_ESP32S2_CORE_SRC_ESP32S2_CORE_H
|
#define __BOARDS_XTENSA_ESP32S2_ESP32S2_SAOLA_1_SRC_ESP32S2_SAOLA_1_H
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Included Files
|
* Included Files
|
||||||
@ -39,29 +39,6 @@
|
|||||||
|
|
||||||
#define BUTTON_BOOT 0
|
#define BUTTON_BOOT 0
|
||||||
|
|
||||||
/* LED
|
|
||||||
*
|
|
||||||
* This is an externally connected LED used for testing.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define GPIO_LED1 2
|
|
||||||
|
|
||||||
/* MCP2515 Interrupt pin */
|
|
||||||
|
|
||||||
#define GPIO_MCP2515_IRQ 22
|
|
||||||
|
|
||||||
/* TIMERS */
|
|
||||||
|
|
||||||
#define TIMER0 0
|
|
||||||
#define TIMER1 1
|
|
||||||
#define TIMER2 2
|
|
||||||
#define TIMER3 3
|
|
||||||
|
|
||||||
/* ONESHOT */
|
|
||||||
|
|
||||||
#define ONESHOT_TIMER 1
|
|
||||||
#define ONESHOT_RESOLUTION_US 1
|
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Public Types
|
* Public Types
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
@ -92,49 +69,5 @@
|
|||||||
|
|
||||||
int esp32s2_bringup(void);
|
int esp32s2_bringup(void);
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: esp32s2_mmcsd_initialize
|
|
||||||
*
|
|
||||||
* Description:
|
|
||||||
* Initialize SPI-based SD card and card detect thread.
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
int esp32s2_mmcsd_initialize(int minor);
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: esp32s2_spiflash_init
|
|
||||||
*
|
|
||||||
* Description:
|
|
||||||
* Initialize the SPIFLASH and register the MTD device.
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
int esp32s2_spiflash_init(void);
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: esp32s2_spiflash_encrypt_test
|
|
||||||
*
|
|
||||||
* Description:
|
|
||||||
* Test ESP32S2 SPI Flash driver read/write with encryption.
|
|
||||||
*
|
|
||||||
* Input Parameters:
|
|
||||||
* None
|
|
||||||
*
|
|
||||||
* Returned Value:
|
|
||||||
* None.
|
|
||||||
*
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#ifdef CONFIG_ESP32S2_SPIFLASH_ENCRYPTION_TEST
|
|
||||||
void esp32s2_spiflash_encrypt_test(void);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: esp32s2_gpio_init
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#ifdef CONFIG_DEV_GPIO
|
|
||||||
int esp32s2_gpio_init(void);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#endif /* __ASSEMBLY__ */
|
#endif /* __ASSEMBLY__ */
|
||||||
#endif /* __BOARDS_XTENSA_ESP32S2_ESP32S2_CORE_SRC_ESP32S2_CORE_H */
|
#endif /* __BOARDS_XTENSA_ESP32S2_ESP32S2_SAOLA_1_SRC_ESP32S2_SAOLA_1_H */
|
||||||
|
|||||||
@ -1,397 +0,0 @@
|
|||||||
/****************************************************************************
|
|
||||||
* boards/xtensa/esp32s2/esp32s2-saola-1/src/esp32s2_gpio.c
|
|
||||||
*
|
|
||||||
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
||||||
* contributor license agreements. See the NOTICE file distributed with
|
|
||||||
* this work for additional information regarding copyright ownership. The
|
|
||||||
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
||||||
* "License"); you may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at
|
|
||||||
*
|
|
||||||
* http://www.apache.org/licenses/LICENSE-2.0
|
|
||||||
*
|
|
||||||
* Unless required by applicable law or agreed to in writing, software
|
|
||||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
||||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
||||||
* License for the specific language governing permissions and limitations
|
|
||||||
* under the License.
|
|
||||||
*
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Included Files
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#include <nuttx/config.h>
|
|
||||||
|
|
||||||
#include <sys/types.h>
|
|
||||||
#include <syslog.h>
|
|
||||||
#include <nuttx/irq.h>
|
|
||||||
#include <arch/irq.h>
|
|
||||||
#include <debug.h>
|
|
||||||
|
|
||||||
#include <nuttx/ioexpander/gpio.h>
|
|
||||||
|
|
||||||
#include <arch/board/board.h>
|
|
||||||
|
|
||||||
#include "esp32s2-saola-1.h"
|
|
||||||
#include "esp32s2_gpio.h"
|
|
||||||
#include "hardware/esp32s2_gpio_sigmap.h"
|
|
||||||
|
|
||||||
#if defined(CONFIG_DEV_GPIO) && !defined(CONFIG_GPIO_LOWER_HALF)
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Pre-processor Definitions
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#if !defined(CONFIG_ESP32S2_GPIO_IRQ) && BOARD_NGPIOINT > 0
|
|
||||||
# error "NGPIOINT is > 0 and GPIO interrupts aren't enabled"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Output pins. GPIO15 is used as an example, any other outputs could be
|
|
||||||
* used.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define GPIO_OUT1 15
|
|
||||||
|
|
||||||
/* Input pins. GPIO18 is used as an example, any other inputs could be
|
|
||||||
* used.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define GPIO_IN1 18
|
|
||||||
|
|
||||||
/* Interrupt pins. GPIO20 is used as an example, any other inputs could be
|
|
||||||
* used.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define GPIO_IRQPIN1 20
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Private Types
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
struct esp32s2gpio_dev_s
|
|
||||||
{
|
|
||||||
struct gpio_dev_s gpio;
|
|
||||||
uint8_t id;
|
|
||||||
};
|
|
||||||
|
|
||||||
struct esp32s2gpint_dev_s
|
|
||||||
{
|
|
||||||
struct esp32s2gpio_dev_s esp32s2gpio;
|
|
||||||
pin_interrupt_t callback;
|
|
||||||
};
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Private Function Prototypes
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#if BOARD_NGPIOOUT > 0
|
|
||||||
static int gpout_read(FAR struct gpio_dev_s *dev, FAR bool *value);
|
|
||||||
static int gpout_write(FAR struct gpio_dev_s *dev, bool value);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if BOARD_NGPIOIN > 0
|
|
||||||
static int gpin_read(FAR struct gpio_dev_s *dev, FAR bool *value);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if BOARD_NGPIOINT > 0
|
|
||||||
static int gpint_read(FAR struct gpio_dev_s *dev, FAR bool *value);
|
|
||||||
static int gpint_attach(FAR struct gpio_dev_s *dev,
|
|
||||||
pin_interrupt_t callback);
|
|
||||||
static int gpint_enable(FAR struct gpio_dev_s *dev, bool enable);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Private Data
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#if BOARD_NGPIOOUT > 0
|
|
||||||
static const struct gpio_operations_s gpout_ops =
|
|
||||||
{
|
|
||||||
.go_read = gpout_read,
|
|
||||||
.go_write = gpout_write,
|
|
||||||
.go_attach = NULL,
|
|
||||||
.go_enable = NULL,
|
|
||||||
};
|
|
||||||
|
|
||||||
/* This array maps the GPIO pins used as OUTPUT */
|
|
||||||
|
|
||||||
static const uint32_t g_gpiooutputs[BOARD_NGPIOOUT] =
|
|
||||||
{
|
|
||||||
GPIO_OUT1
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct esp32s2gpio_dev_s g_gpout[BOARD_NGPIOOUT];
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if BOARD_NGPIOIN > 0
|
|
||||||
static const struct gpio_operations_s gpin_ops =
|
|
||||||
{
|
|
||||||
.go_read = gpin_read,
|
|
||||||
.go_write = NULL,
|
|
||||||
.go_attach = NULL,
|
|
||||||
.go_enable = NULL,
|
|
||||||
};
|
|
||||||
|
|
||||||
/* This array maps the GPIO pins used as INTERRUPT INPUTS */
|
|
||||||
|
|
||||||
static const uint32_t g_gpioinputs[BOARD_NGPIOIN] =
|
|
||||||
{
|
|
||||||
GPIO_IN1
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct esp32s2gpio_dev_s g_gpin[BOARD_NGPIOIN];
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if BOARD_NGPIOINT > 0
|
|
||||||
static const struct gpio_operations_s gpint_ops =
|
|
||||||
{
|
|
||||||
.go_read = gpint_read,
|
|
||||||
.go_write = NULL,
|
|
||||||
.go_attach = gpint_attach,
|
|
||||||
.go_enable = gpint_enable,
|
|
||||||
};
|
|
||||||
|
|
||||||
/* This array maps the GPIO pins used as INTERRUPT INPUTS */
|
|
||||||
|
|
||||||
static const uint32_t g_gpiointinputs[BOARD_NGPIOINT] =
|
|
||||||
{
|
|
||||||
GPIO_IRQPIN1,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct esp32s2gpint_dev_s g_gpint[BOARD_NGPIOINT];
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Private Functions
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: gpout_read
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#if BOARD_NGPIOOUT > 0
|
|
||||||
static int gpout_read(FAR struct gpio_dev_s *dev, FAR bool *value)
|
|
||||||
{
|
|
||||||
FAR struct esp32s2gpio_dev_s *esp32s2gpio =
|
|
||||||
(FAR struct esp32s2gpio_dev_s *)dev;
|
|
||||||
|
|
||||||
DEBUGASSERT(esp32s2gpio != NULL && value != NULL);
|
|
||||||
DEBUGASSERT(esp32s2gpio->id < BOARD_NGPIOOUT);
|
|
||||||
gpioinfo("Reading...\n");
|
|
||||||
|
|
||||||
*value = esp32s2_gpioread(g_gpiooutputs[esp32s2gpio->id]);
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: gpout_write
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
static int gpout_write(FAR struct gpio_dev_s *dev, bool value)
|
|
||||||
{
|
|
||||||
FAR struct esp32s2gpio_dev_s *esp32s2gpio =
|
|
||||||
(FAR struct esp32s2gpio_dev_s *)dev;
|
|
||||||
|
|
||||||
DEBUGASSERT(esp32s2gpio != NULL);
|
|
||||||
DEBUGASSERT(esp32s2gpio->id < BOARD_NGPIOOUT);
|
|
||||||
gpioinfo("Writing %d\n", (int)value);
|
|
||||||
|
|
||||||
esp32s2_gpiowrite(g_gpiooutputs[esp32s2gpio->id], value);
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: gpin_read
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#if BOARD_NGPIOIN > 0
|
|
||||||
static int gpin_read(FAR struct gpio_dev_s *dev, FAR bool *value)
|
|
||||||
{
|
|
||||||
FAR struct esp32s2gpio_dev_s *esp32s2gpio =
|
|
||||||
(FAR struct esp32s2gpio_dev_s *)dev;
|
|
||||||
|
|
||||||
DEBUGASSERT(esp32s2gpio != NULL && value != NULL);
|
|
||||||
DEBUGASSERT(esp32s2gpio->id < BOARD_NGPIOIN);
|
|
||||||
gpioinfo("Reading... pin %d\n", g_gpioinputs[esp32s2gpio->id]);
|
|
||||||
|
|
||||||
*value = esp32s2_gpioread(g_gpioinputs[esp32s2gpio->id]);
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: esp32s2gpio_interrupt
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#if BOARD_NGPIOINT > 0
|
|
||||||
static int esp32s2gpio_interrupt(int irq, void *context, void *arg)
|
|
||||||
{
|
|
||||||
FAR struct esp32s2gpint_dev_s *esp32s2gpint =
|
|
||||||
(FAR struct esp32s2gpint_dev_s *)arg;
|
|
||||||
|
|
||||||
DEBUGASSERT(esp32s2gpint != NULL && esp32s2gpint->callback != NULL);
|
|
||||||
gpioinfo("Interrupt! callback=%p\n", esp32s2gpint->callback);
|
|
||||||
|
|
||||||
esp32s2gpint->callback(&esp32s2gpint->esp32s2gpio.gpio,
|
|
||||||
esp32s2gpint->esp32s2gpio.id);
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: gpint_read
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
static int gpint_read(FAR struct gpio_dev_s *dev, FAR bool *value)
|
|
||||||
{
|
|
||||||
FAR struct esp32s2gpint_dev_s *esp32s2gpint =
|
|
||||||
(FAR struct esp32s2gpint_dev_s *)dev;
|
|
||||||
|
|
||||||
DEBUGASSERT(esp32s2gpint != NULL && value != NULL);
|
|
||||||
DEBUGASSERT(esp32s2gpint->esp32s2gpio.id < BOARD_NGPIOINT);
|
|
||||||
gpioinfo("Reading int pin...\n");
|
|
||||||
|
|
||||||
*value = esp32s2_gpioread(g_gpiointinputs[esp32s2gpint->esp32s2gpio.id]);
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: gpint_attach
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
static int gpint_attach(FAR struct gpio_dev_s *dev,
|
|
||||||
pin_interrupt_t callback)
|
|
||||||
{
|
|
||||||
FAR struct esp32s2gpint_dev_s *esp32s2gpint =
|
|
||||||
(FAR struct esp32s2gpint_dev_s *)dev;
|
|
||||||
int irq = ESP32S2_PIN2IRQ(g_gpiointinputs[esp32s2gpint->esp32s2gpio.id]);
|
|
||||||
int ret;
|
|
||||||
|
|
||||||
gpioinfo("Attaching the callback\n");
|
|
||||||
|
|
||||||
/* Make sure the interrupt is disabled */
|
|
||||||
|
|
||||||
esp32s2_gpioirqdisable(irq);
|
|
||||||
ret = irq_attach(irq,
|
|
||||||
esp32s2gpio_interrupt,
|
|
||||||
&g_gpint[esp32s2gpint->esp32s2gpio.id]);
|
|
||||||
if (ret < 0)
|
|
||||||
{
|
|
||||||
syslog(LOG_ERR, "ERROR: gpint_attach() failed: %d\n", ret);
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
|
|
||||||
gpioinfo("Attach %p\n", callback);
|
|
||||||
esp32s2gpint->callback = callback;
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: gpint_enable
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
static int gpint_enable(FAR struct gpio_dev_s *dev, bool enable)
|
|
||||||
{
|
|
||||||
FAR struct esp32s2gpint_dev_s *esp32s2gpint =
|
|
||||||
(FAR struct esp32s2gpint_dev_s *)dev;
|
|
||||||
int irq = ESP32S2_PIN2IRQ(g_gpiointinputs[esp32s2gpint->esp32s2gpio.id]);
|
|
||||||
|
|
||||||
if (enable)
|
|
||||||
{
|
|
||||||
if (esp32s2gpint->callback != NULL)
|
|
||||||
{
|
|
||||||
gpioinfo("Enabling the interrupt\n");
|
|
||||||
|
|
||||||
/* Configure the interrupt for rising edge */
|
|
||||||
|
|
||||||
esp32s2_gpioirqenable(irq, RISING);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
gpioinfo("Disable the interrupt\n");
|
|
||||||
esp32s2_gpioirqdisable(irq);
|
|
||||||
}
|
|
||||||
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Public Functions
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: esp32s2_gpio_init
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
int esp32s2_gpio_init(void)
|
|
||||||
{
|
|
||||||
int i;
|
|
||||||
int pincount = 0;
|
|
||||||
|
|
||||||
#if BOARD_NGPIOOUT > 0
|
|
||||||
for (i = 0; i < BOARD_NGPIOOUT; i++)
|
|
||||||
{
|
|
||||||
/* Setup and register the GPIO pin */
|
|
||||||
|
|
||||||
g_gpout[i].gpio.gp_pintype = GPIO_OUTPUT_PIN;
|
|
||||||
g_gpout[i].gpio.gp_ops = &gpout_ops;
|
|
||||||
g_gpout[i].id = i;
|
|
||||||
gpio_pin_register(&g_gpout[i].gpio, pincount);
|
|
||||||
|
|
||||||
/* Configure the pins that will be used as output */
|
|
||||||
|
|
||||||
esp32s2_gpio_matrix_out(g_gpiooutputs[i], SIG_GPIO_OUT_IDX, 0, 0);
|
|
||||||
esp32s2_configgpio(g_gpiooutputs[i], OUTPUT_FUNCTION_3);
|
|
||||||
esp32s2_gpiowrite(g_gpiooutputs[i], 0);
|
|
||||||
|
|
||||||
pincount++;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
pincount = 0;
|
|
||||||
|
|
||||||
#if BOARD_NGPIOIN > 0
|
|
||||||
for (i = 0; i < BOARD_NGPIOIN; i++)
|
|
||||||
{
|
|
||||||
/* Setup and register the GPIO pin */
|
|
||||||
|
|
||||||
g_gpin[i].gpio.gp_pintype = GPIO_INPUT_PIN;
|
|
||||||
g_gpin[i].gpio.gp_ops = &gpin_ops;
|
|
||||||
g_gpin[i].id = i;
|
|
||||||
gpio_pin_register(&g_gpin[i].gpio, pincount);
|
|
||||||
|
|
||||||
/* Configure the pins that will be used as INPUT */
|
|
||||||
|
|
||||||
esp32s2_configgpio(g_gpioinputs[i], INPUT_FUNCTION_3);
|
|
||||||
|
|
||||||
pincount++;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
pincount = 0;
|
|
||||||
|
|
||||||
#if BOARD_NGPIOINT > 0
|
|
||||||
for (i = 0; i < BOARD_NGPIOINT; i++)
|
|
||||||
{
|
|
||||||
/* Setup and register the GPIO pin */
|
|
||||||
|
|
||||||
g_gpint[i].esp32s2gpio.gpio.gp_pintype = GPIO_INTERRUPT_PIN;
|
|
||||||
g_gpint[i].esp32s2gpio.gpio.gp_ops = &gpint_ops;
|
|
||||||
g_gpint[i].esp32s2gpio.id = i;
|
|
||||||
gpio_pin_register(&g_gpint[i].esp32s2gpio.gpio, pincount);
|
|
||||||
|
|
||||||
/* Configure the pins that will be used as interrupt input */
|
|
||||||
|
|
||||||
esp32s2_configgpio(g_gpiointinputs[i], INPUT_FUNCTION_3 | PULLDOWN);
|
|
||||||
|
|
||||||
pincount++;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
return OK;
|
|
||||||
}
|
|
||||||
#endif /* CONFIG_DEV_GPIO && !CONFIG_GPIO_LOWER_HALF */
|
|
||||||
@ -1,63 +0,0 @@
|
|||||||
/****************************************************************************
|
|
||||||
* boards/xtensa/esp32s2/esp32s2-saola-1/src/esp32s2_reset.c
|
|
||||||
*
|
|
||||||
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
||||||
* contributor license agreements. See the NOTICE file distributed with
|
|
||||||
* this work for additional information regarding copyright ownership. The
|
|
||||||
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
|
||||||
* "License"); you may not use this file except in compliance with the
|
|
||||||
* License. You may obtain a copy of the License at
|
|
||||||
*
|
|
||||||
* http://www.apache.org/licenses/LICENSE-2.0
|
|
||||||
*
|
|
||||||
* Unless required by applicable law or agreed to in writing, software
|
|
||||||
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
|
||||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
|
||||||
* License for the specific language governing permissions and limitations
|
|
||||||
* under the License.
|
|
||||||
*
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Included Files
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
#include <nuttx/config.h>
|
|
||||||
|
|
||||||
#include <nuttx/arch.h>
|
|
||||||
#include <nuttx/board.h>
|
|
||||||
|
|
||||||
#ifdef CONFIG_BOARDCTL_RESET
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Public Functions
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
/****************************************************************************
|
|
||||||
* Name: board_reset
|
|
||||||
*
|
|
||||||
* Description:
|
|
||||||
* Reset board. Support for this function is required by board-level
|
|
||||||
* logic if CONFIG_BOARDCTL_RESET is selected.
|
|
||||||
*
|
|
||||||
* Input Parameters:
|
|
||||||
* status - Status information provided with the reset event. This
|
|
||||||
* meaning of this status information is board-specific. If not
|
|
||||||
* used by a board, the value zero may be provided in calls to
|
|
||||||
* board_reset().
|
|
||||||
*
|
|
||||||
* Returned Value:
|
|
||||||
* If this function returns, then it was not possible to power-off the
|
|
||||||
* board due to some constraints. The return value in this case is a
|
|
||||||
* board-specific reason for the failure to shutdown.
|
|
||||||
*
|
|
||||||
****************************************************************************/
|
|
||||||
|
|
||||||
int board_reset(int status)
|
|
||||||
{
|
|
||||||
up_systemreset();
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif /* CONFIG_BOARDCTL_RESET */
|
|
||||||
114
tools/esp32s2/Config.mk
Normal file
114
tools/esp32s2/Config.mk
Normal file
@ -0,0 +1,114 @@
|
|||||||
|
############################################################################
|
||||||
|
# tools/esp32s2/Config.mk
|
||||||
|
#
|
||||||
|
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
# contributor license agreements. See the NOTICE file distributed with
|
||||||
|
# this work for additional information regarding copyright ownership. The
|
||||||
|
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
# "License"); you may not use this file except in compliance with the
|
||||||
|
# License. You may obtain a copy of the License at
|
||||||
|
#
|
||||||
|
# http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#
|
||||||
|
# Unless required by applicable law or agreed to in writing, software
|
||||||
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
# License for the specific language governing permissions and limitations
|
||||||
|
# under the License.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
# These are the macros that will be used in the NuttX make system to compile
|
||||||
|
# and assemble source files and to insert the resulting object files into an
|
||||||
|
# archive. These replace the default definitions at tools/Config.mk
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESP32S2_FLASH_2M),y)
|
||||||
|
FLASH_SIZE := 2MB
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_4M),y)
|
||||||
|
FLASH_SIZE := 4MB
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_8M),y)
|
||||||
|
FLASH_SIZE := 8MB
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_16M),y)
|
||||||
|
FLASH_SIZE := 16MB
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESP32S2_FLASH_MODE_DIO),y)
|
||||||
|
FLASH_MODE := dio
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_MODE_DOUT),y)
|
||||||
|
FLASH_MODE := dout
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_MODE_QIO),y)
|
||||||
|
FLASH_MODE := qio
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_MODE_QOUT),y)
|
||||||
|
FLASH_MODE := qout
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESP32S2_FLASH_FREQ_80M),y)
|
||||||
|
FLASH_FREQ := 80m
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_FREQ_40M),y)
|
||||||
|
FLASH_FREQ := 40m
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_FREQ_26M),y)
|
||||||
|
FLASH_FREQ := 26m
|
||||||
|
else ifeq ($(CONFIG_ESP32S2_FLASH_FREQ_20M),y)
|
||||||
|
FLASH_FREQ := 20m
|
||||||
|
endif
|
||||||
|
|
||||||
|
ESPTOOL_ELF2IMG_OPTS := -fs $(FLASH_SIZE) -fm $(FLASH_MODE) -ff $(FLASH_FREQ)
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESP32S2_FLASH_DETECT),y)
|
||||||
|
ESPTOOL_WRITEFLASH_OPTS := -fs detect -fm dio -ff $(FLASH_FREQ)
|
||||||
|
else
|
||||||
|
ESPTOOL_WRITEFLASH_OPTS := -fs $(FLASH_SIZE) -fm dio -ff $(FLASH_FREQ)
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifdef ESPTOOL_BINDIR
|
||||||
|
BL_OFFSET=0x1000
|
||||||
|
PT_OFFSET=0x8000
|
||||||
|
BOOTLOADER=$(ESPTOOL_BINDIR)/bootloader-esp32s2.bin
|
||||||
|
PARTITION_TABLE=$(ESPTOOL_BINDIR)/partition-table-esp32s2.bin
|
||||||
|
FLASH_BL=$(BL_OFFSET) $(BOOTLOADER)
|
||||||
|
FLASH_PT=$(PT_OFFSET) $(PARTITION_TABLE)
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ESP32S2_QEMU_IMAGE),y)
|
||||||
|
MK_QEMU_IMG=$(TOPDIR)/tools/esp32s2/mk_qemu_img.sh -b $(BOOTLOADER) -p $(PARTITION_TABLE)
|
||||||
|
else
|
||||||
|
MK_QEMU_IMG=
|
||||||
|
endif
|
||||||
|
|
||||||
|
# POSTBUILD -- Perform post build operations
|
||||||
|
|
||||||
|
define POSTBUILD
|
||||||
|
$(Q) echo "MKIMAGE: ESP32S2 binary"
|
||||||
|
$(Q) if ! esptool.py version 1>/dev/null 2>&1; then \
|
||||||
|
echo ""; \
|
||||||
|
echo "esptool.py not found. Please run: \"pip install esptool\""; \
|
||||||
|
echo ""; \
|
||||||
|
echo "Run make again to create the nuttx.bin image."; \
|
||||||
|
exit 1; \
|
||||||
|
fi
|
||||||
|
$(Q) if [ -z $(FLASH_SIZE) ]; then \
|
||||||
|
echo "Missing Flash memory size configuration for the ESP32S2 chip."; \
|
||||||
|
exit 1; \
|
||||||
|
fi
|
||||||
|
esptool.py -c esp32-s2 elf2image $(ESPTOOL_ELF2IMG_OPTS) -o nuttx.bin nuttx
|
||||||
|
$(Q) echo "Generated: nuttx.bin (ESP32S2 compatible)"
|
||||||
|
$(Q) $(MK_QEMU_IMG)
|
||||||
|
endef
|
||||||
|
|
||||||
|
# ESPTOOL_BAUD -- Serial port baud rate used when flashing/reading via esptool.py
|
||||||
|
|
||||||
|
ESPTOOL_BAUD ?= 921600
|
||||||
|
|
||||||
|
# DOWNLOAD -- Download binary image via esptool.py
|
||||||
|
|
||||||
|
define DOWNLOAD
|
||||||
|
|
||||||
|
$(eval ESPTOOL_BINS := $(FLASH_BL) $(FLASH_PT) 0x10000 $(1).bin)
|
||||||
|
|
||||||
|
$(Q) if [ -z $(ESPTOOL_PORT) ]; then \
|
||||||
|
echo "DOWNLOAD error: Missing serial port device argument."; \
|
||||||
|
echo "USAGE: make download ESPTOOL_PORT=<port> [ ESPTOOL_BAUD=<baud> ] [ ESPTOOL_BINDIR=<dir> ]"; \
|
||||||
|
exit 1; \
|
||||||
|
fi
|
||||||
|
esptool.py -c esp32-s2 -p $(ESPTOOL_PORT) -b $(ESPTOOL_BAUD) write_flash $(ESPTOOL_WRITEFLASH_OPTS) $(ESPTOOL_BINS)
|
||||||
|
endef
|
||||||
Loading…
x
Reference in New Issue
Block a user