diff --git a/configs/Kconfig b/configs/Kconfig index e2b2eb68d3..0717b0aa82 100644 --- a/configs/Kconfig +++ b/configs/Kconfig @@ -510,6 +510,17 @@ config ARCH_BOARD_OLIMEX_STM32H405 further information. This board features the STMicro STM32F405RGT6 MCU. +config ARCH_BOARD_OLIMEX_STM32H407 + bool "Olimex STM32 H407 board" + depends on ARCH_CHIP_STM32F407ZG + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS + ---help--- + This port uses the Olimex STM32 H407 board and a GNU arm-nuttx-elf + toolchain* under Linux or Cygwin. See the http://www.olimex.com for + further information. This board features the STMicro STM32F407ZGT6 (144pins). + config ARCH_BOARD_OLIMEX_STM32P107 bool "Olimex STM32 P107 board" depends on ARCH_CHIP_STM32F107VC @@ -1322,6 +1333,7 @@ config ARCH_BOARD default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378 default "olimex-lpc-h3131" if ARCH_BOARD_OLIMEX_LPC_H3131 default "olimex-stm32-h405" if ARCH_BOARD_OLIMEX_STM32H405 + default "olimex-stm32-h407" if ARCH_BOARD_OLIMEX_STM32H407 default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107 default "olimex-stm32-p207" if ARCH_BOARD_OLIMEX_STM32P207 default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711 @@ -1604,6 +1616,9 @@ endif if ARCH_BOARD_OLIMEX_STM32H405 source "configs/olimex-stm32-h405/Kconfig" endif +if ARCH_BOARD_OLIMEX_STM32H407 +source "configs/olimex-stm32-h407/Kconfig" +endif if ARCH_BOARD_OLIMEX_STM32P107 source "configs/olimex-stm32-p107/Kconfig" endif diff --git a/configs/olimex-stm32-h407/Kconfig b/configs/olimex-stm32-h407/Kconfig new file mode 100644 index 0000000000..d237822bf2 --- /dev/null +++ b/configs/olimex-stm32-h407/Kconfig @@ -0,0 +1,8 @@ +# +# For a description of the syntax of this configuration file, +# see the file kconfig-language.txt in the NuttX tools repository. +# + +if ARCH_BOARD_OLIMEX_STM32H407 + +endif diff --git a/configs/olimex-stm32-h407/README.txt b/configs/olimex-stm32-h407/README.txt new file mode 100644 index 0000000000..30f193f38b --- /dev/null +++ b/configs/olimex-stm32-h407/README.txt @@ -0,0 +1,16 @@ +README +====== + +The Olimex STM32-H407 configuration is based on +stm32Fdiscovery and Olimex STM32-H405. + +The H407 was programmed with ST-LINK/V2 from both Win8.1 and Ubuntu 14.04 + +nsh - Only basic shell response tested on USART2 + +This realease provides baseline for H407 12MHZ clock in include/board.h + +TODO: Update to use mini USB-OTG and USB HOST + + + diff --git a/configs/olimex-stm32-h407/include/board.h b/configs/olimex-stm32-h407/include/board.h new file mode 100644 index 0000000000..beee81bcf9 --- /dev/null +++ b/configs/olimex-stm32-h407/include/board.h @@ -0,0 +1,262 @@ +/************************************************************************************ + * configs/olimex-stm32-h407/include/board.h + * + * Copyright (C) 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * Modified for H407 Neil Hancock + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H +#define __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H 1 + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#ifndef __ASSEMBLY__ +# include +# include +#endif + +#ifdef __KERNEL__ +# include "stm32_rcc.h" +# include "stm32_sdio.h" +# include "stm32.h" +#endif + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ +/* The Olimex-STM32-H407 board features a 12MHz crystal and + * a 32kHz RTC backup crystal. + * + * This is the canonical configuration: + * System Clock source : PLL (HSE) + * SYSCLK(Hz) : 168000000 Determined by PLL configuration + * HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE) + * AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE) + * APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1) + * APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2) + * HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL) + * PLLM : 8 (STM32_PLLCFG_PLLM) + * PLLN : 336 (STM32_PLLCFG_PLLN) + * PLLP : 2 (STM32_PLLCFG_PLLP) + * PLLQ : 7 (STM32_PLLCFG_PLLQ) + * Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK + * Flash Latency(WS) : 5 + * Prefetch Buffer : OFF + * Instruction cache : ON + * Data cache : ON + * Require 48MHz for USB OTG FS, : Enabled + * SDIO and RNG clock + */ + +/* HSI - 16 MHz RC factory-trimmed + * LSI - 32 KHz RC (30-60KHz, uncalibrated) + * HSE - On-board crystal frequency is 12MHz + * LSE - 32.768 kHz + * STM32F407ZGT6 - too 168Mhz + */ + +#define STM32_BOARD_XTAL 12000000ul + +#define STM32_HSI_FREQUENCY 16000000ul +#define STM32_LSI_FREQUENCY 32000 +#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL +#define STM32_LSE_FREQUENCY 32768 + +/* Main PLL Configuration. + * + * PLL source is HSE + * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN + * = (25,000,000 / 12) * 360 + * = 240,000,000 + * SYSCLK = PLL_VCO / PLLP + * = 240,000,000 / 2 = 120,000,000 + * USB OTG FS, SDIO and RNG Clock + * = PLL_VCO / PLLQ + * = 240,000,000 / 5 = 48,000,000 + * = 48,000,000 + * + * Xtal /M *n /P SysClk AHB HCLK APB1 PCLK1 + * 12Mhz HSE /12 336 /2 PLLCLK 168Mhz /1 168 /4 42Mhz + * 12Mhz HSE /6 168 /2 PLLCLK 168Mhz /1 168 /4 42Mhz + */ + +#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(3) +#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(84) +#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2 +#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5) +#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7) + +#define STM32_SYSCLK_FREQUENCY 168000000ul + +/* AHB clock (HCLK) is SYSCLK (168MHz) */ + +#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ +#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY +#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ + +/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */ + +#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */ +#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4) + +/* Timers driven from APB1 will be twice PCLK1 */ + +#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY) + +/* APB2 clock (PCLK2) is HCLK/2 */ + +#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */ +#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +/* Timers driven from APB2 will be twice PCLK2 */ + +#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM9_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM10_CLKIN (2*STM32_PCLK2_FREQUENCY) +#define STM32_APB2_TIM11_CLKIN (2*STM32_PCLK2_FREQUENCY) + +/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx + * otherwise frequency is 2xAPBx. + * Note: TIM1,8 are on APB2, others on APB1 + */ + +#define STM32_TIM18_FREQUENCY STM32_HCLK_FREQUENCY +#define STM32_TIM27_FREQUENCY STM32_HCLK_FREQUENCY + +/* LED definitions ******************************************************************/ +/* If CONFIG_ARCH_LEDS is not defined, then the user can control the status LED in any + * way. The following definitions are used to access individual LEDs. + */ + +/* LED index values for use with board_userled() */ + +#define BOARD_LED_STATUS 0 +#define BOARD_NLEDS 1 + +/* LED bits for use with board_userled_all() */ + +#define BOARD_LED_STATUS_BIT (1 << BOARD_LED1) + +/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the status LED of the + * Olimex STM32-H405. The following definitions describe how NuttX controls the LEDs: + */ + +#define LED_STARTED 0 /* LED_STATUS on */ +#define LED_HEAPALLOCATE 1 /* no change */ +#define LED_IRQSENABLED 2 /* no change */ +#define LED_STACKCREATED 3 /* no change */ +#define LED_INIRQ 4 /* no change */ +#define LED_SIGNAL 5 /* no change */ +#define LED_ASSERTION 6 /* LED_STATUS off */ +#define LED_PANIC 7 /* LED_STATUS blinking */ + +/* Button definitions ***************************************************************/ +/* The Olimex STM32-H405 supports one buttons: */ + +#define BUTTON_BUT 0 +#define NUM_BUTTONS 1 + +#define BUTTON_BUT_BIT (1 << BUTTON_BUT) + +/* Alternate function pin selections ************************************************/ + +//USART3: +//#define GPIO_USART3_RX GPIO_USART3_RX_1 //PB11 +//#define GPIO_USART3_TX GPIO_USART3_TX_1 //PB10 +//#define GPIO_USART3_CTS GPIO_USART3_CTS_1 //PB13 +//#define GPIO_USART3_RTS GPIO_USART3_RTS_1 //PB14 + +//USART2 +#define GPIO_USART2_RX GPIO_USART2_RX_1 // +#define GPIO_USART2_TX GPIO_USART2_TX_1 // +#define GPIO_USART2_CTS GPIO_USART2_CTS_1 // +#define GPIO_USART2_RTS GPIO_USART2_RTS_1 // + +//CAN: +#define GPIO_CAN1_RX GPIO_CAN1_RX_2 //PB8 +#define GPIO_CAN1_TX GPIO_CAN1_TX_2 //PB9 +#define GPIO_CAN2_RX GPIO_CAN1_RX_2 //PB5 +#define GPIO_CAN2_TX GPIO_CAN1_TX_2 //PB6 + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" +{ +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the initialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void stm32_boardinitialize(void); + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_OLIMEX_STM32_H407_INCLUDE_BOARD_H */ diff --git a/configs/olimex-stm32-h407/nsh/Make.defs b/configs/olimex-stm32-h407/nsh/Make.defs new file mode 100644 index 0000000000..38887dee87 --- /dev/null +++ b/configs/olimex-stm32-h407/nsh/Make.defs @@ -0,0 +1,113 @@ +############################################################################ +# configs/olimex-stm32-h407/nsh/Make.defs +# +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +LDSCRIPT = ld.script + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = + diff --git a/configs/olimex-stm32-h407/nsh/defconfig b/configs/olimex-stm32-h407/nsh/defconfig new file mode 100644 index 0000000000..afe4924f9a --- /dev/null +++ b/configs/olimex-stm32-h407/nsh/defconfig @@ -0,0 +1,1106 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +CONFIG_APPS_DIR="../apps" +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +CONFIG_ARCH_HAVE_HEAPCHECK=y +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +CONFIG_DEBUG_SYMBOLS=y +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STM32F7 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_CHIP_TMS570 is not set +# CONFIG_ARCH_CHIP_MOXART is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM3 is not set +CONFIG_ARCH_CORTEXM4=y +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +# CONFIG_ARCH_CORTEXR4 is not set +# CONFIG_ARCH_CORTEXR4F is not set +# CONFIG_ARCH_CORTEXR5 is not set +# CONFIG_ARCH_CORTEX5F is not set +# CONFIG_ARCH_CORTEXR7 is not set +# CONFIG_ARCH_CORTEXR7F is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARMV7M_LAZYFPU is not set +CONFIG_ARCH_HAVE_FPU=y +# CONFIG_ARCH_HAVE_DPFPU is not set +# CONFIG_ARCH_FPU is not set +CONFIG_ARM_HAVE_MPU_UNIFIED=y +# CONFIG_ARM_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y +CONFIG_ARMV7M_HAVE_STACKCHECK=y +# CONFIG_ARMV7M_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32L151C6 is not set +# CONFIG_ARCH_CHIP_STM32L151C8 is not set +# CONFIG_ARCH_CHIP_STM32L151CB is not set +# CONFIG_ARCH_CHIP_STM32L151R6 is not set +# CONFIG_ARCH_CHIP_STM32L151R8 is not set +# CONFIG_ARCH_CHIP_STM32L151RB is not set +# CONFIG_ARCH_CHIP_STM32L151V6 is not set +# CONFIG_ARCH_CHIP_STM32L151V8 is not set +# CONFIG_ARCH_CHIP_STM32L151VB is not set +# CONFIG_ARCH_CHIP_STM32L152C6 is not set +# CONFIG_ARCH_CHIP_STM32L152C8 is not set +# CONFIG_ARCH_CHIP_STM32L152CB is not set +# CONFIG_ARCH_CHIP_STM32L152R6 is not set +# CONFIG_ARCH_CHIP_STM32L152R8 is not set +# CONFIG_ARCH_CHIP_STM32L152RB is not set +# CONFIG_ARCH_CHIP_STM32L152V6 is not set +# CONFIG_ARCH_CHIP_STM32L152V8 is not set +# CONFIG_ARCH_CHIP_STM32L152VB is not set +# CONFIG_ARCH_CHIP_STM32L162ZD is not set +# CONFIG_ARCH_CHIP_STM32L162VE is not set +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F102CB is not set +# CONFIG_ARCH_CHIP_STM32F103T8 is not set +# CONFIG_ARCH_CHIP_STM32F103TB is not set +# CONFIG_ARCH_CHIP_STM32F103C4 is not set +# CONFIG_ARCH_CHIP_STM32F103C8 is not set +# CONFIG_ARCH_CHIP_STM32F103CB is not set +# CONFIG_ARCH_CHIP_STM32F103R8 is not set +# CONFIG_ARCH_CHIP_STM32F103RB is not set +# CONFIG_ARCH_CHIP_STM32F103RC is not set +# CONFIG_ARCH_CHIP_STM32F103RD is not set +# CONFIG_ARCH_CHIP_STM32F103RE is not set +# CONFIG_ARCH_CHIP_STM32F103RG is not set +# CONFIG_ARCH_CHIP_STM32F103V8 is not set +# CONFIG_ARCH_CHIP_STM32F103VB is not set +# CONFIG_ARCH_CHIP_STM32F103VC is not set +# CONFIG_ARCH_CHIP_STM32F103VE is not set +# CONFIG_ARCH_CHIP_STM32F103ZE is not set +# CONFIG_ARCH_CHIP_STM32F105VB is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +# CONFIG_ARCH_CHIP_STM32F205RG is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F207ZE is not set +# CONFIG_ARCH_CHIP_STM32F302K6 is not set +# CONFIG_ARCH_CHIP_STM32F302K8 is not set +# CONFIG_ARCH_CHIP_STM32F302CB is not set +# CONFIG_ARCH_CHIP_STM32F302CC is not set +# CONFIG_ARCH_CHIP_STM32F302RB is not set +# CONFIG_ARCH_CHIP_STM32F302RC is not set +# CONFIG_ARCH_CHIP_STM32F302VB is not set +# CONFIG_ARCH_CHIP_STM32F302VC is not set +# CONFIG_ARCH_CHIP_STM32F303K6 is not set +# CONFIG_ARCH_CHIP_STM32F303K8 is not set +# CONFIG_ARCH_CHIP_STM32F303C6 is not set +# CONFIG_ARCH_CHIP_STM32F303C8 is not set +# CONFIG_ARCH_CHIP_STM32F303CB is not set +# CONFIG_ARCH_CHIP_STM32F303CC is not set +# CONFIG_ARCH_CHIP_STM32F303RB is not set +# CONFIG_ARCH_CHIP_STM32F303RC is not set +# CONFIG_ARCH_CHIP_STM32F303RD is not set +# CONFIG_ARCH_CHIP_STM32F303RE is not set +# CONFIG_ARCH_CHIP_STM32F303VB is not set +# CONFIG_ARCH_CHIP_STM32F303VC is not set +# CONFIG_ARCH_CHIP_STM32F372C8 is not set +# CONFIG_ARCH_CHIP_STM32F372R8 is not set +# CONFIG_ARCH_CHIP_STM32F372V8 is not set +# CONFIG_ARCH_CHIP_STM32F372CB is not set +# CONFIG_ARCH_CHIP_STM32F372RB is not set +# CONFIG_ARCH_CHIP_STM32F372VB is not set +# CONFIG_ARCH_CHIP_STM32F372CC is not set +# CONFIG_ARCH_CHIP_STM32F372RC is not set +# CONFIG_ARCH_CHIP_STM32F372VC is not set +# CONFIG_ARCH_CHIP_STM32F373C8 is not set +# CONFIG_ARCH_CHIP_STM32F373R8 is not set +# CONFIG_ARCH_CHIP_STM32F373V8 is not set +# CONFIG_ARCH_CHIP_STM32F373CB is not set +# CONFIG_ARCH_CHIP_STM32F373RB is not set +# CONFIG_ARCH_CHIP_STM32F373VB is not set +# CONFIG_ARCH_CHIP_STM32F373CC is not set +# CONFIG_ARCH_CHIP_STM32F373RC is not set +# CONFIG_ARCH_CHIP_STM32F373VC is not set +# CONFIG_ARCH_CHIP_STM32F401RE is not set +# CONFIG_ARCH_CHIP_STM32F411RE is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +# CONFIG_ARCH_CHIP_STM32F407VG is not set +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +CONFIG_ARCH_CHIP_STM32F407ZG=y +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +# CONFIG_ARCH_CHIP_STM32F427V is not set +# CONFIG_ARCH_CHIP_STM32F427Z is not set +# CONFIG_ARCH_CHIP_STM32F427I is not set +# CONFIG_ARCH_CHIP_STM32F429V is not set +# CONFIG_ARCH_CHIP_STM32F429Z is not set +# CONFIG_ARCH_CHIP_STM32F429I is not set +# CONFIG_ARCH_CHIP_STM32F429B is not set +# CONFIG_ARCH_CHIP_STM32F429N is not set +# CONFIG_ARCH_CHIP_STM32F446M is not set +# CONFIG_ARCH_CHIP_STM32F446R is not set +# CONFIG_ARCH_CHIP_STM32F446V is not set +# CONFIG_ARCH_CHIP_STM32F446Z is not set +CONFIG_STM32_FLASH_CONFIG_DEFAULT=y +# CONFIG_STM32_FLASH_CONFIG_4 is not set +# CONFIG_STM32_FLASH_CONFIG_6 is not set +# CONFIG_STM32_FLASH_CONFIG_8 is not set +# CONFIG_STM32_FLASH_CONFIG_B is not set +# CONFIG_STM32_FLASH_CONFIG_C is not set +# CONFIG_STM32_FLASH_CONFIG_D is not set +# CONFIG_STM32_FLASH_CONFIG_E is not set +# CONFIG_STM32_FLASH_CONFIG_F is not set +# CONFIG_STM32_FLASH_CONFIG_G is not set +# CONFIG_STM32_FLASH_CONFIG_I is not set +# CONFIG_STM32_STM32L15XX is not set +# CONFIG_STM32_ENERGYLITE is not set +# CONFIG_STM32_STM32F10XX is not set +# CONFIG_STM32_VALUELINE is not set +# CONFIG_STM32_CONNECTIVITYLINE is not set +# CONFIG_STM32_PERFORMANCELINE is not set +# CONFIG_STM32_USBACCESSLINE is not set +# CONFIG_STM32_HIGHDENSITY is not set +# CONFIG_STM32_MEDIUMDENSITY is not set +# CONFIG_STM32_LOWDENSITY is not set +# CONFIG_STM32_STM32F20XX is not set +# CONFIG_STM32_STM32F205 is not set +# CONFIG_STM32_STM32F207 is not set +# CONFIG_STM32_STM32F30XX is not set +# CONFIG_STM32_STM32F302 is not set +# CONFIG_STM32_STM32F303 is not set +# CONFIG_STM32_STM32F37XX is not set +CONFIG_STM32_STM32F40XX=y +# CONFIG_STM32_STM32F401 is not set +# CONFIG_STM32_STM32F411 is not set +# CONFIG_STM32_STM32F405 is not set +CONFIG_STM32_STM32F407=y +# CONFIG_STM32_STM32F427 is not set +# CONFIG_STM32_STM32F429 is not set +# CONFIG_STM32_STM32F446 is not set +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +CONFIG_STM32_HAVE_CCM=y +# CONFIG_STM32_HAVE_USBDEV is not set +CONFIG_STM32_HAVE_OTGFS=y +CONFIG_STM32_HAVE_FSMC=y +CONFIG_STM32_HAVE_USART3=y +CONFIG_STM32_HAVE_UART4=y +CONFIG_STM32_HAVE_UART5=y +CONFIG_STM32_HAVE_USART6=y +# CONFIG_STM32_HAVE_UART7 is not set +# CONFIG_STM32_HAVE_UART8 is not set +CONFIG_STM32_HAVE_TIM1=y +CONFIG_STM32_HAVE_TIM3=y +CONFIG_STM32_HAVE_TIM4=y +CONFIG_STM32_HAVE_TIM5=y +CONFIG_STM32_HAVE_TIM6=y +CONFIG_STM32_HAVE_TIM7=y +CONFIG_STM32_HAVE_TIM8=y +CONFIG_STM32_HAVE_TIM9=y +CONFIG_STM32_HAVE_TIM10=y +CONFIG_STM32_HAVE_TIM11=y +CONFIG_STM32_HAVE_TIM12=y +CONFIG_STM32_HAVE_TIM13=y +CONFIG_STM32_HAVE_TIM14=y +# CONFIG_STM32_HAVE_TIM15 is not set +# CONFIG_STM32_HAVE_TIM16 is not set +# CONFIG_STM32_HAVE_TIM17 is not set +CONFIG_STM32_HAVE_ADC2=y +CONFIG_STM32_HAVE_ADC3=y +# CONFIG_STM32_HAVE_ADC4 is not set +# CONFIG_STM32_HAVE_ADC1_DMA is not set +# CONFIG_STM32_HAVE_ADC2_DMA is not set +# CONFIG_STM32_HAVE_ADC3_DMA is not set +# CONFIG_STM32_HAVE_ADC4_DMA is not set +CONFIG_STM32_HAVE_CAN1=y +CONFIG_STM32_HAVE_CAN2=y +CONFIG_STM32_HAVE_DAC1=y +CONFIG_STM32_HAVE_DAC2=y +CONFIG_STM32_HAVE_RNG=y +CONFIG_STM32_HAVE_ETHMAC=y +CONFIG_STM32_HAVE_I2C2=y +CONFIG_STM32_HAVE_I2C3=y +# CONFIG_STM32_HAVE_SPI2=y +# CONFIG_STM32_HAVE_SPI3=y +# CONFIG_STM32_HAVE_SPI4 is not set +# CONFIG_STM32_HAVE_SPI5 is not set +# CONFIG_STM32_HAVE_SPI6 is not set +# CONFIG_STM32_HAVE_SAIPLL is not set +# CONFIG_STM32_HAVE_I2SPLL is not set +# CONFIG_STM32_ADC1 is not set +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_ADC3 is not set +# CONFIG_STM32_BKPSRAM is not set +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set +# CONFIG_STM32_CCMDATARAM is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_CRYP is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_DCMI is not set +# CONFIG_STM32_ETHMAC is not set +# CONFIG_STM32_FSMC is not set +# CONFIG_STM32_HASH is not set +# CONFIG_STM32_I2C1 is not set +# CONFIG_STM32_I2C2 is not set +# CONFIG_STM32_I2C3 is not set +CONFIG_STM32_OTGFS=y +# CONFIG_STM32_OTGHS is not set +CONFIG_STM32_PWR=y +# CONFIG_STM32_RNG is not set +# CONFIG_STM32_SDIO is not set +# CONFIG_STM32_SPI1=y +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set +CONFIG_STM32_SYSCFG=y +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_TIM8 is not set +# CONFIG_STM32_TIM9 is not set +# CONFIG_STM32_TIM10 is not set +# CONFIG_STM32_TIM11 is not set +# CONFIG_STM32_TIM12 is not set +# CONFIG_STM32_TIM13 is not set +# CONFIG_STM32_TIM14 is not set +# CONFIG_STM32_USART1 is not set +CONFIG_STM32_USART2=y +# CONFIG_STM32_USART3 is not set +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_USART6 is not set +# CONFIG_STM32_IWDG is not set +# CONFIG_STM32_WWDG is not set +CONFIG_STM32_SPI=y +# CONFIG_STM32_NOEXT_VECTORS is not set + +# +# Alternate Pin Mapping +# +# CONFIG_STM32_FLASH_PREFETCH is not set +# CONFIG_STM32_JTAG_DISABLE is not set +# CONFIG_STM32_JTAG_FULL_ENABLE is not set +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +CONFIG_STM32_JTAG_SW_ENABLE=y +# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set +# CONFIG_STM32_CCMEXCLUDE is not set +CONFIG_STM32_USART=y + +# +# U[S]ART Configuration +# +# CONFIG_USART2_RS485 is not set +# CONFIG_SERIAL_DISABLE_REORDERING is not set +# CONFIG_STM32_FLOWCONTROL_BROKEN is not set +# CONFIG_STM32_USART_SINGLEWIRE is not set + +# +# SPI Configuration +# +# CONFIG_STM32_SPI_INTERRUPTS is not set +# CONFIG_STM32_SPI_DMA is not set +# CONFIG_STM32_HAVE_RTC_COUNTER is not set +# CONFIG_STM32_HAVE_RTC_SUBSECONDS is not set + +# +# USB FS Host Configuration +# + +# +# USB HS Host Configuration +# + +# +# USB Host Debug Configuration +# + +# +# USB Device Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +CONFIG_ARCH_HAVE_RESET=y +# CONFIG_ARCH_USE_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=114688 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_OLIMEX_STM32H407=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="olimex-stm32-h407" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# +# CONFIG_LIB_BOARDCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2016 +CONFIG_START_MONTH=1 +CONFIG_START_DAY=1 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=16 +CONFIG_WDOG_INTRESERVE=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=31 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_HPWORK is not set +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +CONFIG_ARCH_HAVE_I2CRESET=y +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_SLAVE is not set +# CONFIG_SPI_OWNBUS is not set +# CONFIG_SPI_EXCHANGE is not set +# CONFIG_SPI_CMDDATA is not set +# CONFIG_SPI_CALLBACK is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_IOEXPANDER is not set +# CONFIG_LCD is not set + +# +# LED Support +# +# CONFIG_USERLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +# CONFIG_ARCH_HAVE_UART is not set +# CONFIG_ARCH_HAVE_UART0 is not set +# CONFIG_ARCH_HAVE_UART1 is not set +# CONFIG_ARCH_HAVE_UART2 is not set +# CONFIG_ARCH_HAVE_UART3 is not set +# CONFIG_ARCH_HAVE_UART4 is not set +# CONFIG_ARCH_HAVE_UART5 is not set +# CONFIG_ARCH_HAVE_UART6 is not set +# CONFIG_ARCH_HAVE_UART7 is not set +# CONFIG_ARCH_HAVE_UART8 is not set +# CONFIG_ARCH_HAVE_SCI0 is not set +# CONFIG_ARCH_HAVE_SCI1 is not set +# CONFIG_ARCH_HAVE_USART0 is not set +# CONFIG_ARCH_HAVE_USART1 is not set +CONFIG_ARCH_HAVE_USART2=y +# CONFIG_ARCH_HAVE_USART3 is not set +# CONFIG_ARCH_HAVE_USART4 is not set +# CONFIG_ARCH_HAVE_USART5 is not set +# CONFIG_ARCH_HAVE_USART6 is not set +# CONFIG_ARCH_HAVE_USART7 is not set +# CONFIG_ARCH_HAVE_USART8 is not set +# CONFIG_ARCH_HAVE_OTHER_UART is not set + +# +# USART Configuration +# +CONFIG_USART2_ISUART=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_USART2_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART2 Configuration +# +CONFIG_USART2_RXBUFSIZE=128 +CONFIG_USART2_TXBUFSIZE=128 +CONFIG_USART2_BAUD=115200 +CONFIG_USART2_BITS=8 +CONFIG_USART2_PARITY=0 +CONFIG_USART2_2STOP=0 +# CONFIG_USART2_IFLOWCONTROL is not set +# CONFIG_USART2_OFLOWCONTROL is not set +# CONFIG_USART2_DMA is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_CONSOLE is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +CONFIG_FS_READABLE=y +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +CONFIG_FS_PROCFS=y +# CONFIG_FS_PROCFS_REGISTER is not set + +# +# Exclude individual procfs entries +# +# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set +# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set +# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set +# CONFIG_FS_UNIONFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set +# CONFIG_SYSLOG_TIMESTAMP is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_IOCTL_VARIADIC is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set +# CONFIG_LIBC_NETDB is not set +# CONFIG_NETDB_HOSTFILE is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CPUHOG is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_WEBSERVER is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# File System Utilities +# + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_BAS is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_BASENAME is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_DIRNAME is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_IFUPDOWN is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +# CONFIG_NSH_CMDOPT_HEXDUMP is not set +CONFIG_NSH_PROC_MOUNTPOINT="/proc" +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_INIFILE is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_READLINE_TABCOMPLETION is not set +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_RAMTRON is not set +# CONFIG_SYSTEM_SDCARD is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/olimex-stm32-h407/nsh/setenv.sh b/configs/olimex-stm32-h407/nsh/setenv.sh new file mode 100755 index 0000000000..d67e6fdc7d --- /dev/null +++ b/configs/olimex-stm32-h407/nsh/setenv.sh @@ -0,0 +1,80 @@ +#!/bin/bash +# configs/stm32f4discovery/nsh/setenv.sh +# +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the RIDE +# toolchain under windows. You will also have to edit this if you install +# the RIDE toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" + +# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors" +# You can this free toolchain here https://launchpad.net/gcc-arm-embedded +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH variable +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/configs/olimex-stm32-h407/scripts/ld.script b/configs/olimex-stm32-h407/scripts/ld.script new file mode 100644 index 0000000000..508d49e59c --- /dev/null +++ b/configs/olimex-stm32-h407/scripts/ld.script @@ -0,0 +1,122 @@ +/**************************************************************************** + * configs/olimex-stm32-h405/scripts/ld.script + * + * Copyright (C) 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32F405RGT6 has 1024Kb of FLASH beginning at address 0x0800:0000 and + * 192Kb of SRAM. SRAM is split up into two blocks: + * + * 1) 112Kb of SRAM beginning at address 0x2000:0000 + * 2) 16Kb of SRAM beginning at address 0x2001:c000 + 3) 64Kb of SRAM beginning at address 0x2002:0000 + * + * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 + * where the code expects to begin execution by jumping to the entry point in + * the 0x0800:0000 address + * range. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/olimex-stm32-h407/src/Makefile b/configs/olimex-stm32-h407/src/Makefile new file mode 100644 index 0000000000..99492bb638 --- /dev/null +++ b/configs/olimex-stm32-h407/src/Makefile @@ -0,0 +1,87 @@ +############################################################################ +# configs/olimex-stm32-h407/src/Makefile +# +# Copyright (C) 2014 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +ASRCS = +CSRCS = stm32_boot.c + +ifeq ($(CONFIG_HAVE_CXX),y) +CSRCS += stm32_cxxinitialize.c +endif + +ifeq ($(CONFIG_ARCH_LEDS),y) +CSRCS += stm32_autoleds.c +else +CSRCS += stm32_userleds.c +endif + +ifeq ($(CONFIG_ARCH_BUTTONS),y) +CSRCS += stm32_buttons.c +endif + +ifeq ($(CONFIG_NSH_LIBRARY),y) +CSRCS += stm32_nsh.c +endif + +ifeq ($(CONFIG_ARCH_IDLE_CUSTOM),y) +CSRCS += stm32_idle.c +endif + +ifeq ($(CONFIG_STM32_FSMC),y) +CSRCS += stm32_extmem.c +endif + +ifeq ($(CONFIG_STM32_OTGFS),y) +CSRCS += stm32_usb.c +endif + +ifeq ($(CONFIG_STM32_OTGHS),y) +CSRCS += stm32_usb.c +endif + +ifeq ($(CONFIG_ADC),y) +CSRCS += stm32_adc.c +endif + +ifeq ($(CONFIG_CAN),y) +CSRCS += stm32_can.c +endif + +ifeq ($(CONFIG_ARCH_FPU),y) +CSRCS += stm32_ostest.c +endif + +include $(TOPDIR)/configs/Board.mk diff --git a/configs/olimex-stm32-h407/src/olimex-stm32-h407.h b/configs/olimex-stm32-h407/src/olimex-stm32-h407.h new file mode 100644 index 0000000000..730769dbcd --- /dev/null +++ b/configs/olimex-stm32-h407/src/olimex-stm32-h407.h @@ -0,0 +1,142 @@ +/**************************************************************************** + * configs/olimex-stm32-h405/src/olimex-stm32-h405.h + * + * Copyright (C) 2014 Max Holtzberg. All rights reserved. + * Author: Max Holtzberg + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __CONFIGS_OLIMEX_STM32_H407_SRC_H +#define __CONFIGS_OLIMEX_STM32_H407_SRC_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include +#include + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Olimex-STM32-P407 GPIOs ****************************************************/ +/* LEDs */ + +#define GPIO_LED_STATUS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN12) + +/* BUTTONS -- NOTE that all have EXTI interrupts configured */ + +#define MIN_IRQBUTTON BUTTON_BUT +#define MAX_IRQBUTTON BUTTON_BUT +#define NUM_IRQBUTTONS 1 + +#define GPIO_BTN_BUT (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0) + +/* USB OTG FS - USB-A connector + * + * PC4 OTG_FS_VBUS VBUS sensing + */ + +//#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTC|GPIO_PIN4) +//#define GPIO_OTGFS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTC|GPIO_PIN4) + +/* USB OTG HS - miniUSB connector + * + * PB13 OTG_HS_VBUS VBUS sensing (also connected to the green LED) + * PA8 OTG_HS_PowerSwitchOn + * PB5 OTG_HS_Overcurrent + */ + +#define GPIO_OTGHS_VBUS (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTB|GPIO_PIN13) +#define GPIO_OTGHS_PWRON (GPIO_OUTPUT|GPIO_OUTPUT_SET|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN8) + +#ifdef CONFIG_USBHOST +# define GPIO_OTGHS_OVER (GPIO_INPUT|GPIO_EXTI|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN5) + +#else +# define GPIO_OTGHS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTB|GPIO_PIN5) +#endif + +/**************************************************************************************************** + * Public Types + ****************************************************************************************************/ + +/**************************************************************************************************** + * Public data + ****************************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_usbinitialize + * + * Description: + * Called from stm32_usbinitialize very early in initialization to setup USB-related + * GPIO pins for the Olimex-STM32-H405 board. + * + ************************************************************************************/ + +#if defined(CONFIG_STM32_OTGFS) || defined(CONFIG_STM32_OTGHS) +void weak_function stm32_usbinitialize(void); +#endif + +/************************************************************************************ + * Name: stm32_adc_initialize + * + * Description: + * Called at application startup time to initialize the ADC functionality. + * + ************************************************************************************/ + +#ifdef CONFIG_ADC +int stm32_adc_initialize(void); +#endif + +/************************************************************************************ + * Name: stm32_can_initialize + * + * Description: + * Called at application startup time to initialize the CAN functionality. + * + ************************************************************************************/ + +#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2)) +int stm32_can_initialize(void); +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_OLIMEX_STM32_H407_SRC_INTERNAL_H */ diff --git a/configs/olimex-stm32-h407/src/stm32_adc.c b/configs/olimex-stm32-h407/src/stm32_adc.c new file mode 100644 index 0000000000..f91e59a8d8 --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_adc.c @@ -0,0 +1,187 @@ +/************************************************************************************ + * configs/olimex-stm32-h405/src/stm32_adc.c + * + * Copyright (C) 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include + +#include +#include +#include + +#include "chip.h" +#include "stm32_adc.h" +#include "olimex-stm32-h407.h" + +#ifdef CONFIG_ADC + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Configuration ********************************************************************/ +/* Up to 3 ADC interfaces are supported */ + +#if STM32_NADC < 3 +# undef CONFIG_STM32_ADC3 +#endif + +#if STM32_NADC < 2 +# undef CONFIG_STM32_ADC2 +#endif + +#if STM32_NADC < 1 +# undef CONFIG_STM32_ADC1 +#endif + +#if defined(CONFIG_STM32_ADC1) || defined(CONFIG_STM32_ADC2) || defined(CONFIG_STM32_ADC3) +#ifndef CONFIG_STM32_ADC1 +# warning "Channel information only available for ADC1" +#endif + +/* The number of ADC channels in the conversion list */ + +#define ADC1_NCHANNELS 1//14 + +/************************************************************************************ + * Private Data + ************************************************************************************/ +/* The Olimex STM32-P405 has a 10 Kohm potentiometer AN_TR connected to PC0 + * ADC123_IN10 + */ + +/* Identifying number of each ADC channel: Variable Resistor. */ + +#ifdef CONFIG_STM32_ADC1 +static const uint8_t g_chanlist[ADC1_NCHANNELS] = {1};/*, 2, 3, + 4, 5, 6, + 7, 8, 9, + 10, 11, 12, + 13, 15};*/ + +/* Configurations of pins used byte each ADC channels */ + +static const uint32_t g_pinlist[ADC1_NCHANNELS] = {GPIO_ADC1_IN1};/*, GPIO_ADC1_IN2, GPIO_ADC1_IN3, + GPIO_ADC1_IN4, GPIO_ADC1_IN5, GPIO_ADC1_IN6, + GPIO_ADC1_IN7, GPIO_ADC1_IN8, GPIO_ADC1_IN9, + GPIO_ADC1_IN10, GPIO_ADC1_IN11, GPIO_ADC1_IN12, + GPIO_ADC1_IN13, GPIO_ADC1_IN15};*/ +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: board_adc_setup + * + * Description: + * All STM32 architectures must provide the following interface to work with + * examples/adc. + * + ************************************************************************************/ + +int board_adc_setup(void) +{ + return stm32_adc_initialize(); +} + +/************************************************************************************ + * Name: stm32_adc_initialize + * + * Description: + * Called at application startup time to initialize the ADC functionality. + * + ************************************************************************************/ + +int stm32_adc_initialize(void) +{ +#ifdef CONFIG_STM32_ADC1 + static bool initialized = false; + struct adc_dev_s *adc; + int ret; + int i; + + /* Check if we have already initialized */ + + if (!initialized) + { + /* Configure the pins as analog inputs for the selected channels */ + + for (i = 0; i < ADC1_NCHANNELS; i++) + { + stm32_configgpio(g_pinlist[i]); + } + + /* Call stm32_adcinitialize() to get an instance of the ADC interface */ + + adc = stm32_adcinitialize(1, g_chanlist, ADC1_NCHANNELS); + if (adc == NULL) + { + adbg("ERROR: Failed to get ADC interface\n"); + return -ENODEV; + } + + /* Register the ADC driver at "/dev/adc0" */ + + ret = adc_register("/dev/adc0", adc); + if (ret < 0) + { + adbg("adc_register failed: %d\n", ret); + return ret; + } + + /* Now we are initialized */ + + initialized = true; + } + + return OK; +#else + return -ENOSYS; +#endif +} + +#endif /* CONFIG_STM32_ADC1 || CONFIG_STM32_ADC2 || CONFIG_STM32_ADC3 */ +#endif /* CONFIG_ADC */ diff --git a/configs/olimex-stm32-h407/src/stm32_autoleds.c b/configs/olimex-stm32-h407/src/stm32_autoleds.c new file mode 100644 index 0000000000..53a764327e --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_autoleds.c @@ -0,0 +1,122 @@ +/**************************************************************************** + * configs/olimex-stm32-h407/src/stm32_autoleds.c + * + * Copyright (C) 2014-2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include + +#include +#include + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "stm32.h" +#include "olimex-stm32-h407.h" + +#ifdef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG + * with CONFIG_DEBUG_VERBOSE too) + */ + +#ifdef CONFIG_DEBUG_LEDS +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_autoled_initialize + ****************************************************************************/ + +void board_autoled_initialize(void) +{ + /* Configure LED_STATUS GPIO for output */ + + stm32_configgpio(GPIO_LED_STATUS); +} + +/**************************************************************************** + * Name: board_autoled_on + ****************************************************************************/ + +void board_autoled_on(int led) +{ + if(led == LED_STARTED) + stm32_gpiowrite(GPIO_LED_STATUS, true); + + if(led == LED_ASSERTION || led == LED_PANIC) + stm32_gpiowrite(GPIO_LED_STATUS, false); +} + +/**************************************************************************** + * Name: board_autoled_off + ****************************************************************************/ + +void board_autoled_off(int led) +{ + if(led == LED_STARTED) + stm32_gpiowrite(GPIO_LED_STATUS, false); + + if(led == LED_ASSERTION || led == LED_PANIC) + stm32_gpiowrite(GPIO_LED_STATUS, true); +} + +#endif /* CONFIG_ARCH_LEDS */ diff --git a/configs/olimex-stm32-h407/src/stm32_boot.c b/configs/olimex-stm32-h407/src/stm32_boot.c new file mode 100644 index 0000000000..5dfad7fb64 --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_boot.c @@ -0,0 +1,126 @@ +/************************************************************************************ + * configs/olimex-stm32-h405/src/stm32_boot.c + * + * Copyright (C) 2014-2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include +#include +#include + +#include "up_arch.h" +#include "olimex-stm32-h407.h" +#include "stm32_ccm.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the intitialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void stm32_boardinitialize(void) +{ + /* Initialize USB if the 1) OTG FS controller is in the configuration and 2) + * disabled, and 3) the weak function stm32_usbinitialize() has been brought + * into the build. Presumeably either CONFIG_USBDEV is also selected. + */ + +#if defined(CONFIG_STM32_OTGFS) || defined(CONFIG_STM32_OTGHS) + if (stm32_usbinitialize) + { + stm32_usbinitialize(); + } +#endif + + /* Configure on-board LEDs if LED support has been selected. */ + +#ifdef CONFIG_ARCH_LEDS + board_autoled_initialize(); +#endif + + /* Configure on-board BUTTONs if BUTTON support has been selected. */ + +#ifdef CONFIG_ARCH_BUTTONS + board_button_initialize(); +#endif +} + +/**************************************************************************** + * Name: board_initialize + * + * Description: + * If CONFIG_BOARD_INITIALIZE is selected, then an additional + * initialization call will be performed in the boot-up sequence to a + * function called board_initialize(). board_initialize() will be + * called immediately after up_intitialize() is called and just before the + * initial application is started. This additional initialization phase + * may be used, for example, to initialize board-specific device drivers. + * + ****************************************************************************/ + +#ifdef CONFIG_BOARD_INITIALIZE +void board_initialize(void) +{ + /* Perform NSH initialization here instead of from the NSH. This + * alternative NSH initialization is necessary when NSH is ran in user-space + * but the initialization function must run in kernel space. + */ + +#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT) + board_app_initialize(); +#endif +} +#endif diff --git a/configs/olimex-stm32-h407/src/stm32_buttons.c b/configs/olimex-stm32-h407/src/stm32_buttons.c new file mode 100644 index 0000000000..d98b0c109e --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_buttons.c @@ -0,0 +1,158 @@ +/**************************************************************************** + * configs/olimex-stm32-h405/src/stm32_buttons.c + * + * Copyright (C) 2014-2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include +#include +#include + +#include "olimex-stm32-h407.h" + +#ifdef CONFIG_ARCH_BUTTONS + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/* Pin configuration for each Olimex-STM32-H405 button. This array is indexed by + * the BUTTON_* definitions in board.h + */ + +static const uint16_t g_buttons[NUM_BUTTONS] = +{ + GPIO_BTN_BUT +}; + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_button_initialize + * + * Description: + * board_button_initialize() must be called to initialize button resources. After + * that, board_buttons() may be called to collect the current state of all + * buttons or board_button_irq() may be called to register button interrupt + * handlers. + * + ****************************************************************************/ + +void board_button_initialize(void) +{ + int i; + + /* Configure the GPIO pins as inputs. NOTE that EXTI interrupts are + * configured for all pins. + */ + + for (i = 0; i < NUM_BUTTONS; i++) + { + stm32_configgpio(g_buttons[i]); + } +} + +/**************************************************************************** + * Name: board_buttons + ****************************************************************************/ + +uint8_t board_buttons(void) +{ + uint8_t ret = 0; + + /* Check that state of each key */ + + if (!stm32_gpioread(g_buttons[BUTTON_BUT])) + { + ret |= BUTTON_BUT_BIT; + } + + return ret; +} + +/************************************************************************************ + * Button support. + * + * Description: + * board_button_initialize() must be called to initialize button resources. After + * that, board_buttons() may be called to collect the current state of all + * buttons or board_button_irq() may be called to register button interrupt + * handlers. + * + * After board_button_initialize() has been called, board_buttons() may be called to + * collect the state of all buttons. board_buttons() returns an 8-bit bit set + * with each bit associated with a button. See the BUTTON_*_BIT + * definitions in board.h for the meaning of each bit. + * + * board_button_irq() may be called to register an interrupt handler that will + * be called when a button is depressed or released. The ID value is a + * button enumeration value that uniquely identifies a button resource. See the + * BUTTON_* definitions in board.h for the meaning of enumeration + * value. The previous interrupt handler address is returned (so that it may + * restored, if so desired). + * + ************************************************************************************/ + +#ifdef CONFIG_ARCH_IRQBUTTONS +xcpt_t board_button_irq(int id, xcpt_t irqhandler) +{ + xcpt_t oldhandler = NULL; + + /* The following should be atomic */ + + if (id >= MIN_IRQBUTTON && id <= MAX_IRQBUTTON) + { + oldhandler = stm32_gpiosetevent(g_buttons[id], true, true, true, irqhandler); + } + + return oldhandler; +} +#endif +#endif /* CONFIG_ARCH_BUTTONS */ diff --git a/configs/olimex-stm32-h407/src/stm32_can.c b/configs/olimex-stm32-h407/src/stm32_can.c new file mode 100644 index 0000000000..cae95ab053 --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_can.c @@ -0,0 +1,149 @@ +/************************************************************************************ + * configs/olimex-stm32-405/src/stm32_can.c + * + * Copyright (C) 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include +#include +#include "stm32.h" +#include "stm32_can.h" +#include "olimex-stm32-h407.h" + +#if defined(CONFIG_CAN) && (defined(CONFIG_STM32_CAN1) || defined(CONFIG_STM32_CAN2)) + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Configuration ********************************************************************/ + +#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2) +# warning "Both CAN1 and CAN2 are enabled. Only CAN1 is used." +# undef CONFIG_STM32_CAN2 +#endif + +#ifdef CONFIG_STM32_CAN1 +# define CAN_PORT 1 +#else +# define CAN_PORT 2 +#endif + +/* Debug ***************************************************************************/ +/* Non-standard debug that may be enabled just for testing CAN */ + +#ifdef CONFIG_DEBUG_CAN +# define candbg dbg +# define canvdbg vdbg +# define canlldbg lldbg +# define canllvdbg llvdbg +#else +# define candbg(x...) +# define canvdbg(x...) +# define canlldbg(x...) +# define canllvdbg(x...) +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: board_can_initialize + * + * Description: + * All STM32 architectures must provide the following interface to work with + * examples/can. + * + ************************************************************************************/ + +int board_can_initialize(void) +{ + return stm32_can_initialize(); +} + +/**************************************************************************************************** + * Name: stm32_can_initialize + * + * Description: + * Called at application startup time to initialize the CAN functionality. + * + ****************************************************************************************************/ + +int stm32_can_initialize(void) +{ + static bool initialized = false; + struct can_dev_s *can; + int ret; + + /* Check if we have already initialized */ + + if (!initialized) + { + /* Call stm32_caninitialize() to get an instance of the CAN interface */ + + can = stm32_caninitialize(CAN_PORT); + if (can == NULL) + { + candbg("ERROR: Failed to get CAN interface\n"); + return -ENODEV; + } + + /* Register the CAN driver at "/dev/can0" */ + + ret = can_register("/dev/can0", can); + if (ret < 0) + { + candbg("ERROR: can_register failed: %d\n", ret); + return ret; + } + + /* Now we are initialized */ + + initialized = true; + } + + return OK; +} + +#endif /* CONFIG_CAN && (CONFIG_STM32_CAN1 || CONFIG_STM32_CAN2) */ diff --git a/configs/olimex-stm32-h407/src/stm32_cxxinitialize.c b/configs/olimex-stm32-h407/src/stm32_cxxinitialize.c new file mode 100644 index 0000000000..30704c57a4 --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_cxxinitialize.c @@ -0,0 +1,153 @@ +/************************************************************************************ + * configs/olimex-stm32-h405/src/stm32_cxxinitialize.c + * + * Copyright (C) 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include + +#include +#include "chip.h" + +#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE) + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Debug ****************************************************************************/ +/* Non-standard debug that may be enabled just for testing the static constructors */ + +#ifndef CONFIG_DEBUG +# undef CONFIG_DEBUG_CXX +#endif + +#ifdef CONFIG_DEBUG_CXX +# define cxxdbg dbg +# define cxxlldbg lldbg +# ifdef CONFIG_DEBUG_VERBOSE +# define cxxvdbg vdbg +# define cxxllvdbg llvdbg +# else +# define cxxvdbg(x...) +# define cxxllvdbg(x...) +# endif +#else +# define cxxdbg(x...) +# define cxxlldbg(x...) +# define cxxvdbg(x...) +# define cxxllvdbg(x...) +#endif + +/************************************************************************************ + * Private Types + ************************************************************************************/ +/* This type defines one entry in initialization array */ + +typedef void (*initializer_t)(void); + +/************************************************************************************ + * External references + ************************************************************************************/ +/* _sinit and _einit are symbols exported by the linker script that mark the + * beginning and the end of the C++ initialization section. + */ + +extern initializer_t _sinit; +extern initializer_t _einit; + +/* _stext and _etext are symbols exported by the linker script that mark the + * beginning and the end of text. + */ + +extern uint32_t _stext; +extern uint32_t _etext; + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/**************************************************************************** + * Name: up_cxxinitialize + * + * Description: + * If C++ and C++ static constructors are supported, then this function + * must be provided by board-specific logic in order to perform + * initialization of the static C++ class instances. + * + * This function should then be called in the application-specific + * user_start logic in order to perform the C++ initialization. NOTE + * that no component of the core NuttX RTOS logic is involved; This + * function defintion only provides the 'contract' between application + * specific C++ code and platform-specific toolchain support + * + ****************************************************************************/ + +void up_cxxinitialize(void) +{ + initializer_t *initp; + + cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n", + &_sinit, &_einit, &_stext, &_etext); + + /* Visit each entry in the initialzation table */ + + for (initp = &_sinit; initp != &_einit; initp++) + { + initializer_t initializer = *initp; + cxxdbg("initp: %p initializer: %p\n", initp, initializer); + + /* Make sure that the address is non-NULL and lies in the text region + * defined by the linker script. Some toolchains may put NULL values + * or counts in the initialization table + */ + + if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext) + { + cxxdbg("Calling %p\n", initializer); + initializer(); + } + } +} + +#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */ diff --git a/configs/olimex-stm32-h407/src/stm32_nsh.c b/configs/olimex-stm32-h407/src/stm32_nsh.c new file mode 100644 index 0000000000..6b655d24eb --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_nsh.c @@ -0,0 +1,170 @@ +/**************************************************************************** + * config/olimex-stm32-h405/src/stm32_nsh.c + * + * Copyright (C) 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include +#include + +#include + +#ifdef CONFIG_SYSTEM_USBMONITOR +# include +#endif + +#ifdef CONFIG_STM32_OTGFS +# include "stm32_usbhost.h" +#endif + +#include "stm32.h" +#include "olimex-stm32-h407.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Configuration ************************************************************/ + +#define HAVE_USBDEV 1 +#define HAVE_USBHOST 1 +#define HAVE_USBMONITOR 1 + +/* Can't support USB host or device features if USB OTG HS is not enabled */ + +#ifndef CONFIG_STM32_OTGHS +# undef HAVE_USBDEV +# undef HAVE_USBHOST +# undef HAVE_USBMONITOR +#endif + +/* Can't support USB device monitor if USB device is not enabled */ + +#ifndef CONFIG_USBDEV +# undef HAVE_USBDEV +# undef HAVE_USBMONITOR +#endif + +/* Can't support USB host is USB host is not enabled */ + +#ifndef CONFIG_USBHOST +# undef HAVE_USBHOST +#endif + +/* Check if we should enable the USB monitor before starting NSH */ + +#if !defined(CONFIG_USBDEV_TRACE) || !defined(CONFIG_SYSTEM_USBMONITOR) +# undef HAVE_USBMONITOR +#endif + +#if !defined(CONFIG_STM32_CAN1) && !defined(CONFIG_STM32_CAN2) +# undef CONFIG_CAN +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_app_initialize + * + * Description: + * Perform architecture specific initialization + * + * CONFIG_NSH_ARCHINIT=y : + * Called from the NSH library + * + * CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, && + * CONFIG_NSH_ARCHINIT=n : + * Called from board_initialize(). + * + ****************************************************************************/ + +int board_app_initialize(void) +{ +#if defined(CONFIG_CAN) || defined(CONFIG_ADC) + int ret; +#endif + +#ifdef CONFIG_CAN + /* Configure on-board CAN if CAN support has been selected. */ + + ret = stm32_can_initialize(); + if (ret != OK) + { + syslog(LOG_ERR, "ERROR: Failed to initialize CAN: %d\n", ret); + } +#endif + +#ifdef CONFIG_ADC + /* Configure on-board ADCs if ADC support has been selected. */ + + ret = stm32_adc_initialize(); + if (ret != OK) + { + syslog(LOG_ERR, "ERROR: Failed to initialize ADC: %d\n", ret); + } +#endif + +#ifdef HAVE_USBHOST + /* Initialize USB host operation. stm32_usbhost_initialize() starts a thread + * will monitor for USB connection and disconnection events. + */ + + ret = stm32_usbhost_initialize(); + if (ret != OK) + { + syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret); + return ret; + } +#endif + +#ifdef HAVE_USBMONITOR + /* Start the USB Monitor */ + + ret = usbmonitor_start(0, NULL); + if (ret != OK) + { + syslog(LOG_ERR, "ERROR: Failed to start USB monitor: %d\n", ret); + } +#endif + + return OK; +} diff --git a/configs/olimex-stm32-h407/src/stm32_usb.c b/configs/olimex-stm32-h407/src/stm32_usb.c new file mode 100644 index 0000000000..6188f99cb2 --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_usb.c @@ -0,0 +1,314 @@ +/************************************************************************************ + * configs/olimex-stm32-h405/src/stm32_usbdev.c + * + * Copyright (C) 2014 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "up_arch.h" +#include "stm32.h" +#include "stm32_otgfs.h" +#include "stm32_otghs.h" +#include "olimex-stm32-h407.h" + +#ifdef CONFIG_STM32_OTGHS + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#if defined(CONFIG_USBDEV) || defined(CONFIG_USBHOST) +# define HAVE_USB 1 +#else +# warning "CONFIG_STM32_OTGHS is enabled but neither CONFIG_USBDEV nor CONFIG_USBHOST" +# undef HAVE_USB +#endif + +#ifndef CONFIG_STM32F407_USBHOST_PRIO +# define CONFIG_STM32F407_USBHOST_PRIO 100 +#endif + +#ifndef CONFIG_STM32F407_USBHOST_STACKSIZE +# define CONFIG_STM32F407_USBHOST_STACKSIZE 1024 +#endif + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +#ifdef CONFIG_USBHOST +static struct usbhost_connection_s *g_usbconn; +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: usbhost_waiter + * + * Description: + * Wait for USB devices to be connected. + * + ************************************************************************************/ + +#ifdef CONFIG_USBHOST +static int usbhost_waiter(int argc, char *argv[]) +{ + struct usbhost_hubport_s *hport; + + uvdbg("Running\n"); + for (;;) + { + /* Wait for the device to change state */ + + DEBUGVERIFY(CONN_WAIT(g_usbconn, &hport)); + uvdbg("%s\n", hport->connected ? "connected" : "disconnected"); + + /* Did we just become connected? */ + + if (hport->connected) + { + /* Yes.. enumerate the newly connected device */ + + (void)CONN_ENUMERATE(g_usbconn, hport); + } + } + + /* Keep the compiler from complaining */ + + return 0; +} +#endif + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_usbinitialize + * + * Description: + * Called from stm32_usbinitialize very early in inialization to setup USB-related + * GPIO pins for the STM32F4Discovery board. + * + ************************************************************************************/ + +void stm32_usbinitialize(void) +{ + /* The OTG HS has an internal soft pull-up. No GPIO configuration is required */ + + /* Configure the OTG HS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ + +#ifdef CONFIG_STM32_OTGHS + stm32_configgpio(GPIO_OTGHS_VBUS); + stm32_configgpio(GPIO_OTGHS_PWRON); + stm32_configgpio(GPIO_OTGHS_OVER); +#endif +} + +/*********************************************************************************** + * Name: stm32_usbhost_initialize + * + * Description: + * Called at application startup time to initialize the USB host functionality. + * This function will start a thread that will monitor for device + * connection/disconnection events. + * + ***********************************************************************************/ + +#ifdef CONFIG_USBHOST +int stm32_usbhost_initialize(void) +{ + int pid; + int ret; + + /* First, register all of the class drivers needed to support the drivers + * that we care about: + */ + + uvdbg("Register class drivers\n"); + +#ifdef CONFIG_USBHOST_HUB + /* Initialize USB hub class support */ + + ret = usbhost_hub_initialize(); + if (ret < 0) + { + udbg("ERROR: usbhost_hub_initialize failed: %d\n", ret); + } +#endif + +#ifdef CONFIG_USBHOST_MSC + /* Register the USB mass storage class class */ + + ret = usbhost_msc_initialize(); + if (ret != OK) + { + udbg("ERROR: Failed to register the mass storage class: %d\n", ret); + } +#endif + +#ifdef CONFIG_USBHOST_CDCACM + /* Register the CDC/ACM serial class */ + + ret = usbhost_cdcacm_initialize(); + if (ret != OK) + { + udbg("ERROR: Failed to register the CDC/ACM serial class: %d\n", ret); + } +#endif + + /* Then get an instance of the USB host interface */ + + uvdbg("Initialize USB host\n"); + g_usbconn = stm32_otghshost_initialize(0); + if (g_usbconn) + { + /* Start a thread to handle device connection. */ + + uvdbg("Start usbhost_waiter\n"); + + pid = task_create("usbhost", CONFIG_STM32H407_USBHOST_PRIO, + CONFIG_STM32H407_USBHOST_STACKSIZE, + (main_t)usbhost_waiter, (FAR char * const *)NULL); + return pid < 0 ? -ENOEXEC : OK; + } + + return -ENODEV; +} +#endif + +/*********************************************************************************** + * Name: stm32_usbhost_vbusdrive + * + * Description: + * Enable/disable driving of VBUS 5V output. This function must be provided be + * each platform that implements the STM32 OTG HS host interface + * + * "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump + * or, if 5 V are available on the application board, a basic power switch, must + * be added externally to drive the 5 V VBUS line. The external charge pump can + * be driven by any GPIO output. When the application decides to power on VBUS + * using the chosen GPIO, it must also set the port power bit in the host port + * control and status register (PPWR bit in OTG_HS_HPRT). + * + * "The application uses this field to control power to this port, and the core + * clears this bit on an overcurrent condition." + * + * Input Parameters: + * iface - For future growth to handle multiple USB host interface. Should be zero. + * enable - true: enable VBUS power; false: disable VBUS power + * + * Returned Value: + * None + * + ***********************************************************************************/ + +#ifdef CONFIG_USBHOST +void stm32_usbhost_vbusdrive(int iface, bool enable) +{ + DEBUGASSERT(iface == 0); + + if (enable) + { + /* Enable the Power Switch by driving the enable pin low */ + + stm32_gpiowrite(GPIO_OTGHS_PWRON, false); + } + else + { + /* Disable the Power Switch by driving the enable pin high */ + + stm32_gpiowrite(GPIO_OTGHS_PWRON, true); + } +} +#endif + +/************************************************************************************ + * Name: stm32_setup_overcurrent + * + * Description: + * Setup to receive an interrupt-level callback if an overcurrent condition is + * detected. + * + * Input Parameters: + * handler - New overcurrent interrupt handler + * + * Returned Value: + * Old overcurrent interrupt handler + * + ************************************************************************************/ + +#ifdef CONFIG_USBHOST +xcpt_t stm32_setup_overcurrent(xcpt_t handler) +{ + return stm32_gpiosetevent(GPIO_OTGHS_OVER, true, true, true, handler); +} +#endif + +/************************************************************************************ + * Name: stm32_usbsuspend + * + * Description: + * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is + * used. This function is called whenever the USB enters or leaves suspend mode. + * This is an opportunity for the board logic to shutdown clocks, power, etc. + * while the USB is suspended. + * + ************************************************************************************/ + +#ifdef CONFIG_USBDEV +void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) +{ + ulldbg("resume: %d\n", resume); +} +#endif + +#endif /* CONFIG_STM32_OTGHS */ diff --git a/configs/olimex-stm32-h407/src/stm32_userleds.c b/configs/olimex-stm32-h407/src/stm32_userleds.c new file mode 100644 index 0000000000..2dd8e8708f --- /dev/null +++ b/configs/olimex-stm32-h407/src/stm32_userleds.c @@ -0,0 +1,118 @@ +/**************************************************************************** + * configs/olimex-stm32-h405/src/stm32_leds.c + * + * Copyright (C) 2014-2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include +#include +#include + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" +#include "stm32.h" +#include "olimex-stm32-h407.h" + +#ifndef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG + * with CONFIG_DEBUG_VERBOSE too) + */ + +#ifdef CONFIG_DEBUG_LEDS +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ +/* This array maps an LED number to GPIO pin configuration */ + +static uint32_t g_ledcfg[BOARD_NLEDS] = +{ + GPIO_LED_STATUS +}; + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_userled_initialize + ****************************************************************************/ + +void board_userled_initialize(void) +{ + /* Configure LED1-4 GPIOs for output */ + + stm32_configgpio(GPIO_LED_STATUS); +} + +/**************************************************************************** + * Name: board_userled + ****************************************************************************/ + +void board_userled(int led, bool ledon) +{ + if ((unsigned)led < BOARD_NLEDS) + { + stm32_gpiowrite(g_ledcfg[led], ledon); + } +} + +/**************************************************************************** + * Name: board_userled_all + ****************************************************************************/ + +void board_userled_all(uint8_t ledset) +{ + stm32_gpiowrite(GPIO_LED_STATUS, (ledset & BOARD_LED1_BIT) != 0); +} + +#endif /* !CONFIG_ARCH_LEDS */