Add FAT long filename support to the Olimex LPC1766-STK NSH and FTPC configuration
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4248 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
parent
d8f2758a03
commit
85464307f5
@ -2300,7 +2300,7 @@
|
|||||||
|
|
||||||
6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
|
||||||
* tools/Makefile.txport, mkexport.sh, and configure.sh: Changes submitted
|
* tools/Makefile.export, mkexport.sh, and configure.sh: Changes submitted
|
||||||
by Mike Smith to support configuration and 'make export' on MAC OS.
|
by Mike Smith to support configuration and 'make export' on MAC OS.
|
||||||
* arch/arm/src/stm32/stm32_gpio.c: Disabled interrupts while configuring
|
* arch/arm/src/stm32/stm32_gpio.c: Disabled interrupts while configuring
|
||||||
GPIO pins so that we have exclusive access to the GPIO configuration
|
GPIO pins so that we have exclusive access to the GPIO configuration
|
||||||
|
@ -8,7 +8,7 @@
|
|||||||
<tr align="center" bgcolor="#e4e4e4">
|
<tr align="center" bgcolor="#e4e4e4">
|
||||||
<td>
|
<td>
|
||||||
<h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
|
<h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
|
||||||
<p>Last Updated: December 26, 2011</p>
|
<p>Last Updated: January 1, 2012</p>
|
||||||
</td>
|
</td>
|
||||||
</tr>
|
</tr>
|
||||||
</table>
|
</table>
|
||||||
@ -2773,8 +2773,36 @@ buildroot-1.10 2011-05-06 <gnutt@nuttx.org>
|
|||||||
<ul><pre>
|
<ul><pre>
|
||||||
nuttx-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
nuttx-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
|
||||||
|
* tools/Makefile.export, mkexport.sh, and configure.sh: Changes submitted
|
||||||
|
by Mike Smith to support configuration and 'make export' on MAC OS.
|
||||||
|
* arch/arm/src/stm32/stm32_gpio.c: Disabled interrupts while configuring
|
||||||
|
GPIO pins so that we have exclusive access to the GPIO configuration
|
||||||
|
registers.
|
||||||
|
* arch/mips/src/pic32mx/pic32mx_usbdev.c: Add a USB device-side driver
|
||||||
|
for the PIC32MX family.
|
||||||
|
* arch/arm/src/stm32/stm32_gpio.c: Correct an error in some of the GPIO
|
||||||
|
initialization logic. Fix submitted by Mike Smith.
|
||||||
|
* configs/olimex-lpc1766stk/src/up_leds.c: Add new interfaces so that is
|
||||||
|
CONFIG_ARCH_LEDS are not set, the LEDs may be controlled from application
|
||||||
|
logic.
|
||||||
|
* configs/olimex-lpc1766stk/src/up_buttons.c: Add support form the buttons
|
||||||
|
on the Olimex LPC1766-STK board.
|
||||||
|
* Makefile: Added 'apps_clean' and 'apps_distclean' target to simplify
|
||||||
|
managing the state of the application directory while in the NuttX directory
|
||||||
|
* Documentation/NuttXGettingStarted.html: Added a "Getting Started" Guide
|
||||||
|
for NuttX. At present, this is just a stub and it refers to the NuttX
|
||||||
|
top-level README.txt file which is the only, real "Getting Started" Guide
|
||||||
|
that exists at the time being.
|
||||||
|
* arch/arm/src/lpc17xx/lpc17_gpioint.c: Correct an value used as the lower
|
||||||
|
end of an IRQ number range test.
|
||||||
|
* arch/arm/src/lpc17xx/lpc17_gpio.c: Fix a integer flow problem in shift.
|
||||||
|
This error would prevent pins > 15 from being used as interrupt sources.
|
||||||
|
|
||||||
apps-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
apps-6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
|
||||||
|
* apps/examples/buttons/main.c: The test needs to up_buttoninit() to
|
||||||
|
properly configure the button interrupt GPIOs.
|
||||||
|
|
||||||
pascal-3.1 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
pascal-3.1 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
|
||||||
buildroot-1.11 2012-xx-xx <gnutt@nuttx.org>
|
buildroot-1.11 2012-xx-xx <gnutt@nuttx.org>
|
||||||
|
@ -812,12 +812,25 @@ Where <subdir> is one of the following:
|
|||||||
where xx.xx.xx.xx is the IP address of the FTP server and pp is an
|
where xx.xx.xx.xx is the IP address of the FTP server and pp is an
|
||||||
optional port number (default is the standard FTP port number 21).
|
optional port number (default is the standard FTP port number 21).
|
||||||
|
|
||||||
You may also want to define the following in your configuration file.
|
NOTES:
|
||||||
Otherwise, you will have not feeback about what is going on:
|
|
||||||
|
1. Support for FAT long file names is built-in but can easily be
|
||||||
|
removed if you are concerned about Microsoft patent issues (see the
|
||||||
|
section "FAT Long File Names" in the top-level COPYING file).
|
||||||
|
|
||||||
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FAT_LCNAMES=y <-- Long file name support
|
||||||
|
CONFIG_FAT_LFN=y
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
2. You may also want to define the following in your configuration file.
|
||||||
|
Otherwise, you will have not feedback about what is going on:
|
||||||
|
|
||||||
CONFIG_DEBUG=y
|
CONFIG_DEBUG=y
|
||||||
CONFIG_DEBUG_VERBOSE=y
|
CONFIG_DEBUG_VERBOSE=y
|
||||||
CONFIG_DEBUG_FTPC=y
|
CONFIG_DEBUG_FTPC=y
|
||||||
|
|
||||||
hidkbd:
|
hidkbd:
|
||||||
This configuration directory, performs a simple test of the USB host
|
This configuration directory, performs a simple test of the USB host
|
||||||
@ -831,8 +844,7 @@ Where <subdir> is one of the following:
|
|||||||
nsh:
|
nsh:
|
||||||
Configures the NuttShell (nsh) located at apps/examples/nsh. The
|
Configures the NuttShell (nsh) located at apps/examples/nsh. The
|
||||||
Configuration enables both the serial and telnet NSH interfaces.
|
Configuration enables both the serial and telnet NSH interfaces.
|
||||||
Support for the board's SPI-based MicroSD card is included
|
Support for the board's SPI-based MicroSD card is included.
|
||||||
(but not passing tests as of this writing).
|
|
||||||
|
|
||||||
NOTE: If you start the program with no SD card inserted, there will be
|
NOTE: If you start the program with no SD card inserted, there will be
|
||||||
a substantial delay. This is because there is no hardware support to sense
|
a substantial delay. This is because there is no hardware support to sense
|
||||||
@ -840,9 +852,37 @@ Where <subdir> is one of the following:
|
|||||||
go through many retries and timeouts before it finally decides that there
|
go through many retries and timeouts before it finally decides that there
|
||||||
is not SD card in the slot.
|
is not SD card in the slot.
|
||||||
|
|
||||||
|
Configuration Notes:
|
||||||
|
|
||||||
|
1. Uses the buildroot toolchaing (CONFIG_LPC17_BUILDROOT=y). But that is
|
||||||
|
easily reconfigured (see above)
|
||||||
|
2. Support for FAT long file names is built-in but can easily be
|
||||||
|
removed if you are concerned about Microsoft patent issues (see the
|
||||||
|
section "FAT Long File Names" in the top-level COPYING file).
|
||||||
|
|
||||||
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FAT_LCNAMES=y <-- Long file name support
|
||||||
|
CONFIG_FAT_LFN=y
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
3. Includes logic to support a button test (apps/examples/buttons). To
|
||||||
|
enable the button test, make the following changes in the .config
|
||||||
|
after configuring:
|
||||||
|
|
||||||
|
-CONFIG_ARCH_BUTTONS=n
|
||||||
|
+CONFIG_ARCH_BUTTONS=y
|
||||||
|
|
||||||
|
-CONFIG_GPIO_IRQ=n
|
||||||
|
-CONFIG_ARCH_IRQBUTTONS=n
|
||||||
|
+CONFIG_GPIO_IRQ=y
|
||||||
|
+CONFIG_ARCH_IRQBUTTONS=y
|
||||||
|
|
||||||
nx:
|
nx:
|
||||||
And example using the NuttX graphics system (NX). This example
|
An example using the NuttX graphics system (NX). This example uses
|
||||||
uses the Nokia 6100 LCD driver.
|
the Nokia 6100 LCD driver. NOTE: The Nokia 6100 driver does not
|
||||||
|
work on this board as of this writing.
|
||||||
|
|
||||||
ostest:
|
ostest:
|
||||||
This configuration directory, performs a simple OS test using
|
This configuration directory, performs a simple OS test using
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/ftpc/defconfig
|
# configs/olimex-lpc1766stk/ftpc/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -483,9 +483,49 @@ CONFIG_PREALLOC_TIMERS=8
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=y
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FAT_LCNAMES=y
|
||||||
|
CONFIG_FAT_LFN=y
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/hidkbd/defconfig
|
# configs/olimex-lpc1766stk/hidkbd/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
@ -466,9 +466,49 @@ CONFIG_PREALLOC_TIMERS=4
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/nettest/defconfig
|
# configs/olimex-lpc1766stk/nettest/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -466,9 +466,49 @@ CONFIG_PREALLOC_TIMERS=8
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -51,4 +51,7 @@ CONFIGURED_APPS += netutils/tftpc
|
|||||||
CONFIGURED_APPS += netutils/webclient
|
CONFIGURED_APPS += netutils/webclient
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
||||||
|
CONFIGURED_APPS += examples/buttons
|
||||||
|
endif
|
||||||
|
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/nsh/defconfig
|
# configs/olimex-lpc1766stk/nsh/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
@ -484,9 +484,49 @@ CONFIG_PREALLOC_TIMERS=4
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=y
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FAT_LCNAMES=y
|
||||||
|
CONFIG_FAT_LFN=y
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/nx/defconfig
|
# configs/olimex-lpc1766stk/nx/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -478,9 +478,49 @@ CONFIG_FB_HWCURSORIMAGE=n
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/ostest/defconfig
|
# configs/olimex-lpc1766stk/ostest/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -459,9 +459,49 @@ CONFIG_PREALLOC_TIMERS=4
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,7 +1,7 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/slip-httpd/defconfig
|
# configs/olimex-lpc1766stk/slip-httpd/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
@ -477,9 +477,49 @@ CONFIG_PREALLOC_TIMERS=8
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=y
|
CONFIG_FS_ROMFS=y
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/thttpd/defconfig
|
# configs/olimex-lpc1766stk/thttpd/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -475,9 +475,49 @@ CONFIG_PREALLOC_TIMERS=8
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=y
|
CONFIG_FS_ROMFS=y
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/usbserial/defconfig
|
# configs/olimex-lpc1766stk/usbserial/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/usbstorage/defconfig
|
# configs/olimex-lpc1766stk/usbstorage/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
@ -1,8 +1,8 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/olimex-lpc1766stk/wlan/defconfig
|
# configs/olimex-lpc1766stk/wlan/defconfig
|
||||||
#
|
#
|
||||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
# modification, are permitted provided that the following conditions
|
# modification, are permitted provided that the following conditions
|
||||||
@ -460,9 +460,49 @@ CONFIG_PREALLOC_TIMERS=4
|
|||||||
#
|
#
|
||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3
|
||||||
|
# file name support.
|
||||||
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims
|
||||||
|
# patents on FAT long file name technology. Please read the
|
||||||
|
# disclaimer in the top-level COPYING file and only enable this
|
||||||
|
# feature if you understand these issues.
|
||||||
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the
|
||||||
|
# default, maximum long file name is 255 bytes. This can eat up
|
||||||
|
# a lot of memory (especially stack space). If you are willing
|
||||||
|
# to live with some non-standard, short long file names, then
|
||||||
|
# define this value. A good choice would be the same value as
|
||||||
|
# selected for CONFIG_NAME_MAX which will limit the visibility
|
||||||
|
# of longer file names anyway.
|
||||||
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support.
|
||||||
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH.
|
||||||
|
# This must have one of the values of 0xff or 0x00.
|
||||||
|
# Default: 0xff.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name.
|
||||||
|
# Default: 255.
|
||||||
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data,
|
||||||
|
# don't both with file chunks smaller than this number of data bytes.
|
||||||
|
# Default: 32.
|
||||||
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean
|
||||||
|
# packing files together toward the end of the file or, if file are
|
||||||
|
# deleted at the end of the file, clean up can simply mean erasing
|
||||||
|
# the end of FLASH memory so that it can be re-used again. However,
|
||||||
|
# doing this can also harm the life of the FLASH part because it can
|
||||||
|
# mean that the tail end of the FLASH is re-used too often. This
|
||||||
|
# threshold determines if/when it is worth erased the tail end of FLASH
|
||||||
|
# and making it available for re-use (and possible over-wear).
|
||||||
|
# Default: 8192.
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this
|
||||||
|
# option will enable a limited form of memory mapping that is
|
||||||
|
# implemented by copying whole files into memory.
|
||||||
#
|
#
|
||||||
CONFIG_FS_FAT=n
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FAT_LCNAMES=n
|
||||||
|
CONFIG_FAT_LFN=n
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
CONFIG_FS_NXFFS=n
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
#
|
#
|
||||||
|
Loading…
x
Reference in New Issue
Block a user