sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Correct some ARMv6-M NVIC addresses

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5680 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2013-02-27 16:19:07 +00:00
parent 2ad48f5ee5
commit 8a776f6dd6
1 changed files with 14 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
configs/nutiny-nuc120/README.txt
View File

@ -95,6 +95,12 @@ LEDs
Serial Console
==============
As with most NuttX configurations, the NuTiny-SKD-NUC120 configurations
depend on having a serial console to interact with the software. The
NuTiny-SDK-NUC120, however, has not on-board RS-232 drivers so will be
necessary to connect the NuTiny-SDK-NUC120 UART pins to an external
RS-232 driver board or TTL-to-Serial USB adaptor.
By default UART1 is used as the serial console on these boards. NUC120LE3AN
is provided as an LQFP48 package and, for this case, the UART1 RX signal
(RXD1) is on PB.4, pin 8, and the TX signal (TXD1) is on PB.5, pin 9.
@ -300,7 +306,8 @@ Where <subdir> is one of the following:
CONFIG_WINDOWS_CYGWIN=y : Using Cygwin
CONFIG_ARMV6M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
3. Serial Console. The serial console is on UART1 which is available
3. Serial Console. A serial console is required to see the OS test
output. The serial console is configured on UART1 which is available
on JP5:
UART1 RX signal (RXD1) is on PB.4, pin 8, and
@ -331,12 +338,17 @@ Where <subdir> is one of the following:
CONFIG_WINDOWS_CYGWIN=y : Using Cygwin
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
3. Serial Console. The serial console is on UART1 which is available
3. Serial Console. A serial console is necessary to interrupt with
NSH. The serial console is configured on UART1 which is available
on JP5:
UART1 RX signal (RXD1) is on PB.4, pin 8, and
UART1 TX signal (TXD1) is on PB.5, pin 9.
It is possible to configure NSH to use a USB serial console instead
of an RS-232 serial console. However, that configuration has not
been impelmented as of this writing.
4. This configuration includes USB Support (CDC/ACM device)
CONFIG_STM32_USB=y : STM32 USB device support