SAM3U-EK touchscreen is now functional; created an NxWM configuration to test it further
This commit is contained in:
Gregory Nutt
parent
940b82bf61
commit
8ba8ad39f9
@ -5087,4 +5087,9 @@
|
||||
SRAM to be functional (2013-6-28).
|
||||
* arch/arm/src/sam34/sam3u_gpio.c: Need to disable write
|
||||
protection before configuring PIO pins.
|
||||
* configs/sam3u-ek/nsh: The touchscreen is now function. The above
|
||||
fix to the sam3u_gpio.c write protection also fixed the touchscreen
|
||||
problem (2013-6-28).
|
||||
* confgis/sam3u_ek/nxwm: Created a configuration for the NxWM
|
||||
window manager for the SAM3U-EK board.
|
||||
|
||||
|
||||
@ -583,6 +583,7 @@ Configuration sub-directories
|
||||
CONFIG_ADS7843E_SPIDEV=2 : Use SPI CS 2 for communication
|
||||
CONFIG_ADS7843E_SPIMODE=0 : Use SPI mode 0
|
||||
CONFIG_ADS7843E_FREQUENCY=1000000 : SPI BAUD 1MHz
|
||||
CONFIG_ADS7843E_SWAPXY=y : If landscpe orientation
|
||||
CONFIG_ADS7843E_THRESHX=51 : These will probably need to be tuned
|
||||
CONFIG_ADS7843E_THRESHY=39
|
||||
|
||||
@ -611,16 +612,71 @@ Configuration sub-directories
|
||||
CONFIG_DEBUG_INPUT=y : Enable debug output from input devices
|
||||
|
||||
STATUS:
|
||||
2013-6-16: The touchscreen is not functional. It seems to
|
||||
perform good measurements but I am not getting the /PENIRQ
|
||||
interrupt. The interrupt is set up correctly (I can ground
|
||||
A24 and I get the interrupt), so apparently the ADS7843E is
|
||||
not generating interrupts. No idea why.
|
||||
2013-6-28: The touchscreen is functional.
|
||||
|
||||
nx:
|
||||
Configures to use examples/nx using the HX834x LCD hardware on
|
||||
the SAM3U-EK development board.
|
||||
|
||||
nxwm
|
||||
----
|
||||
This is a special configuration setup for the NxWM window manager
|
||||
UnitTest. The NxWM window manager can be found here:
|
||||
|
||||
nuttx-code/NxWidgets/nxwm
|
||||
|
||||
The NxWM unit test can be found at:
|
||||
|
||||
nuttx-code/NxWidgets/UnitTests/nxwm
|
||||
|
||||
Documentation for installing the NxWM unit test can be found here:
|
||||
|
||||
nuttx-code/NxWidgets/UnitTests/README.txt
|
||||
|
||||
Here is the quick summary of the build steps (Assuming that all of
|
||||
the required packages are available in a directory ~/nuttx-code):
|
||||
|
||||
1. Intall the nxwm configuration
|
||||
|
||||
$ cd ~/nuttx-code/nuttx/tools
|
||||
$ ./configure.sh stm3240g-eval/nxwm
|
||||
|
||||
2. Make the build context (only)
|
||||
|
||||
$ cd ..
|
||||
$ . ./setenv.sh
|
||||
$ make context
|
||||
...
|
||||
|
||||
3. Install the nxwm unit test
|
||||
|
||||
$ cd ~/nuttx-code/NxWidgets
|
||||
$ tools/install.sh ~/nuttx-code/apps nxwm
|
||||
Creating symbolic link
|
||||
- To ~/nuttx-code/NxWidgets/UnitTests/nxwm
|
||||
- At ~/nuttx-code/apps/external
|
||||
|
||||
4. Build the NxWidgets library
|
||||
|
||||
$ cd ~/nuttx-code/NxWidgets/libnxwidgets
|
||||
$ make TOPDIR=~/nuttx-code/nuttx
|
||||
...
|
||||
|
||||
5. Build the NxWM library
|
||||
|
||||
$ cd ~/nuttx-code/NxWidgets/nxwm
|
||||
$ make TOPDIR=~/nuttx-code/nuttx
|
||||
...
|
||||
|
||||
6. Built NuttX with the installed unit test as the application
|
||||
|
||||
$ cd ~/nuttx-code/nuttx
|
||||
$ make
|
||||
|
||||
STATUS:
|
||||
2013-6-28: Created the configuration but have not yet done
|
||||
anything with it.
|
||||
|
||||
ostest:
|
||||
This configuration directory, performs a simple OS test using
|
||||
examples/ostest. By default, this project assumes that you are
|
||||
|
||||
109
configs/sam3u-ek/nxwm/Make.defs
Normal file
109
configs/sam3u-ek/nxwm/Make.defs
Normal file
@ -0,0 +1,109 @@
|
||||
############################################################################
|
||||
# configs/sam3u-ek/nxwm/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
998
configs/sam3u-ek/nxwm/defconfig
Normal file
998
configs/sam3u-ek/nxwm/defconfig
Normal file
@ -0,0 +1,998 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
CONFIG_DEBUG=y
|
||||
CONFIG_DEBUG_VERBOSE=y
|
||||
|
||||
#
|
||||
# Subsystem Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG_MM is not set
|
||||
# CONFIG_DEBUG_SCHED is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_LIB is not set
|
||||
# CONFIG_DEBUG_BINFMT is not set
|
||||
# CONFIG_DEBUG_GRAPHICS is not set
|
||||
|
||||
#
|
||||
# Driver Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG_LCD is not set
|
||||
# CONFIG_DEBUG_LEDS is not set
|
||||
CONFIG_DEBUG_INPUT=y
|
||||
# CONFIG_DEBUG_ANALOG is not set
|
||||
# CONFIG_DEBUG_SPI is not set
|
||||
# CONFIG_DEBUG_GPIO is not set
|
||||
# CONFIG_DEBUG_AUDIO is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
CONFIG_ARCH_CHIP_SAM34=y
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="sam34"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
# CONFIG_ARCH_HAVE_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
# CONFIG_DEBUG_HARDFAULT is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
|
||||
CONFIG_GPIO_IRQ=y
|
||||
|
||||
#
|
||||
# AT91SAM3/4 Configuration Options
|
||||
#
|
||||
CONFIG_ARCH_CHIP_ATSAM3U4E=y
|
||||
# CONFIG_ARCH_CHIP_ATSAM3X8E is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3X8C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3X4E is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3X4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3A8C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM3A4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4SD32C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4SD32B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4SD16C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4SD16B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4SA16C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4SA16B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4S16C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4S16B is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4S8C is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAM4S8B is not set
|
||||
CONFIG_ARCH_CHIP_SAM3U=y
|
||||
# CONFIG_ARCH_CHIP_SAM3X is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3A is not set
|
||||
# CONFIG_ARCH_CHIP_SAM4L is not set
|
||||
# CONFIG_ARCH_CHIP_SAM4S is not set
|
||||
|
||||
#
|
||||
# AT91SAM3/4 Peripheral Support
|
||||
#
|
||||
CONFIG_SAM34_SPI0=y
|
||||
# CONFIG_SAM34_SSC is not set
|
||||
# CONFIG_SAM34_TC0 is not set
|
||||
# CONFIG_SAM34_TC1 is not set
|
||||
# CONFIG_SAM34_TC2 is not set
|
||||
# CONFIG_SAM34_PWM is not set
|
||||
# CONFIG_SAM34_TWIM0 is not set
|
||||
# CONFIG_SAM34_TWIS0 is not set
|
||||
# CONFIG_SAM34_TWIM1 is not set
|
||||
# CONFIG_SAM34_TWIS1 is not set
|
||||
CONFIG_SAM34_UART0=y
|
||||
# CONFIG_SAM34_USART0 is not set
|
||||
# CONFIG_SAM34_USART1 is not set
|
||||
# CONFIG_SAM34_USART2 is not set
|
||||
# CONFIG_SAM34_USART3 is not set
|
||||
# CONFIG_SAM34_ADC12B is not set
|
||||
# CONFIG_SAM34_ADC is not set
|
||||
# CONFIG_SAM34_SMC is not set
|
||||
# CONFIG_SAM34_NAND is not set
|
||||
# CONFIG_SAM34_DMA is not set
|
||||
# CONFIG_SAM34_UDPHS is not set
|
||||
# CONFIG_SAM34_UOTGHS is not set
|
||||
# CONFIG_SAM34_RTC is not set
|
||||
# CONFIG_SAM34_RTT is not set
|
||||
# CONFIG_SAM34_WDT is not set
|
||||
# CONFIG_SAM34_HSMCI is not set
|
||||
|
||||
#
|
||||
# AT91SAM3/4 USART Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# AT91SAM3/4 GPIO Interrupt Configuration
|
||||
#
|
||||
CONFIG_GPIOA_IRQ=y
|
||||
# CONFIG_GPIOB_IRQ is not set
|
||||
# CONFIG_GPIOC_IRQ is not set
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
CONFIG_ARCH_HAVE_EXTNAND=y
|
||||
CONFIG_ARCH_HAVE_EXTNOR=y
|
||||
CONFIG_ARCH_HAVE_EXTSRAM0=y
|
||||
CONFIG_ARCH_HAVE_EXTSRAM1=y
|
||||
# CONFIG_ARCH_EXTNAND is not set
|
||||
# CONFIG_ARCH_EXTNOR is not set
|
||||
# CONFIG_ARCH_EXTSRAM0 is not set
|
||||
# CONFIG_ARCH_EXTSRAM1 is not set
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
CONFIG_ARCH_HAVE_RAMFUNCS=y
|
||||
# CONFIG_ARCH_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=8720
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=32768
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_SAM3UEK=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="sam3u-ek"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
CONFIG_ARCH_BUTTONS=y
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
# CONFIG_ARCH_IRQBUTTONS is not set
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2013
|
||||
CONFIG_START_MONTH=6
|
||||
CONFIG_START_DAY=28
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
CONFIG_SCHED_ONEXIT=y
|
||||
CONFIG_SCHED_ONEXIT_MAX=1
|
||||
CONFIG_USER_ENTRYPOINT="nxwm_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
# CONFIG_DISABLE_ENVIRON is not set
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
CONFIG_SIG_SIGWORK=17
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=12
|
||||
CONFIG_NFILE_STREAMS=12
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=32
|
||||
CONFIG_MQ_MAXMSGSIZE=48
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=1024
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=1024
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_OWNBUS=y
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_TSC2007 is not set
|
||||
CONFIG_INPUT_ADS7843E=y
|
||||
# CONFIG_ADS7843E_MULTIPLE is not set
|
||||
CONFIG_ADS7843E_SPIDEV=2
|
||||
CONFIG_ADS7843E_DEVMINOR=0
|
||||
CONFIG_ADS7843E_SPIMODE=0
|
||||
CONFIG_ADS7843E_FREQUENCY=100000
|
||||
CONFIG_ADS7843E_SWAPXY=y
|
||||
CONFIG_ADS7843E_THRESHX=51
|
||||
CONFIG_ADS7843E_THRESHY=39
|
||||
# CONFIG_INPUT_STMPE811 is not set
|
||||
CONFIG_LCD=y
|
||||
|
||||
#
|
||||
# Common LCD Settings
|
||||
#
|
||||
# CONFIG_LCD_NOGETRUN is not set
|
||||
CONFIG_LCD_MAXCONTRAST=1
|
||||
CONFIG_LCD_MAXPOWER=31
|
||||
|
||||
#
|
||||
# Graphic LCD Devices
|
||||
#
|
||||
# CONFIG_LCD_P14201 is not set
|
||||
# CONFIG_LCD_NOKIA6100 is not set
|
||||
# CONFIG_LCD_MIO283QT2 is not set
|
||||
# CONFIG_LCD_UG9664HSWAG01 is not set
|
||||
# CONFIG_LCD_UG2864HSWEG01 is not set
|
||||
# CONFIG_LCD_UG2832HSWEG04 is not set
|
||||
# CONFIG_LCD_ST7567 is not set
|
||||
# CONFIG_LCD_UG2864AMBAG01 is not set
|
||||
# CONFIG_LCD_SSD1289 is not set
|
||||
CONFIG_LCD_LANDSCAPE=y
|
||||
# CONFIG_LCD_PORTRAIT is not set
|
||||
# CONFIG_LCD_RPORTRAIT is not set
|
||||
# CONFIG_LCD_RLANDSCAPE is not set
|
||||
|
||||
#
|
||||
# Alphanumeric/Segment LCD Devices
|
||||
#
|
||||
# CONFIG_LCD_LCD1602 is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_UART0=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
# CONFIG_SERIAL_TIOCSERGSTRUCT is not set
|
||||
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# UART0 Configuration
|
||||
#
|
||||
CONFIG_UART0_RXBUFSIZE=256
|
||||
CONFIG_UART0_TXBUFSIZE=256
|
||||
CONFIG_UART0_BAUD=115200
|
||||
CONFIG_UART0_BITS=8
|
||||
CONFIG_UART0_PARITY=0
|
||||
CONFIG_UART0_2STOP=0
|
||||
# CONFIG_UART0_IFLOWCONTROL is not set
|
||||
# CONFIG_UART0_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
# CONFIG_FS_FAT is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
CONFIG_NX=y
|
||||
CONFIG_NX_LCDDRIVER=y
|
||||
CONFIG_NX_NPLANES=1
|
||||
CONFIG_NX_WRITEONLY=y
|
||||
|
||||
#
|
||||
# Supported Pixel Depths
|
||||
#
|
||||
CONFIG_NX_DISABLE_1BPP=y
|
||||
CONFIG_NX_DISABLE_2BPP=y
|
||||
CONFIG_NX_DISABLE_4BPP=y
|
||||
CONFIG_NX_DISABLE_8BPP=y
|
||||
# CONFIG_NX_DISABLE_16BPP is not set
|
||||
CONFIG_NX_DISABLE_24BPP=y
|
||||
CONFIG_NX_DISABLE_32BPP=y
|
||||
CONFIG_NX_PACKEDMSFIRST=y
|
||||
|
||||
#
|
||||
# Input Devices
|
||||
#
|
||||
CONFIG_NX_MOUSE=y
|
||||
CONFIG_NX_KBD=y
|
||||
|
||||
#
|
||||
# Framed Window Borders
|
||||
#
|
||||
CONFIG_NXTK_BORDERWIDTH=4
|
||||
CONFIG_NXTK_DEFAULT_BORDERCOLORS=y
|
||||
# CONFIG_NXTK_AUTORAISE is not set
|
||||
|
||||
#
|
||||
# Font Selections
|
||||
#
|
||||
CONFIG_NXFONTS_CHARBITS=7
|
||||
# CONFIG_NXFONT_MONO5X8 is not set
|
||||
# CONFIG_NXFONT_SANS17X22 is not set
|
||||
# CONFIG_NXFONT_SANS20X26 is not set
|
||||
CONFIG_NXFONT_SANS23X27=y
|
||||
# CONFIG_NXFONT_SANS22X29 is not set
|
||||
# CONFIG_NXFONT_SANS28X37 is not set
|
||||
# CONFIG_NXFONT_SANS39X48 is not set
|
||||
# CONFIG_NXFONT_SANS17X23B is not set
|
||||
# CONFIG_NXFONT_SANS20X27B is not set
|
||||
CONFIG_NXFONT_SANS22X29B=y
|
||||
# CONFIG_NXFONT_SANS28X37B is not set
|
||||
# CONFIG_NXFONT_SANS40X49B is not set
|
||||
# CONFIG_NXFONT_SERIF22X29 is not set
|
||||
# CONFIG_NXFONT_SERIF29X37 is not set
|
||||
# CONFIG_NXFONT_SERIF38X48 is not set
|
||||
# CONFIG_NXFONT_SERIF22X28B is not set
|
||||
# CONFIG_NXFONT_SERIF27X38B is not set
|
||||
# CONFIG_NXFONT_SERIF38X49B is not set
|
||||
CONFIG_NXCONSOLE=y
|
||||
|
||||
#
|
||||
# NxConsole Output Text/Graphics Options
|
||||
#
|
||||
CONFIG_NXCONSOLE_BPP=16
|
||||
CONFIG_NXCONSOLE_CURSORCHAR=137
|
||||
CONFIG_NXCONSOLE_MXCHARS=325
|
||||
CONFIG_NXCONSOLE_CACHESIZE=32
|
||||
CONFIG_NXCONSOLE_LINESEPARATION=0
|
||||
# CONFIG_NXCONSOLE_NOWRAP is not set
|
||||
|
||||
#
|
||||
# NxConsole Input options
|
||||
#
|
||||
CONFIG_NXCONSOLE_NXKBDIN=y
|
||||
CONFIG_NXCONSOLE_KBDBUFSIZE=16
|
||||
CONFIG_NXCONSOLE_NPOLLWAITERS=4
|
||||
|
||||
#
|
||||
# NX Multi-user only options
|
||||
#
|
||||
CONFIG_NX_MULTIUSER=y
|
||||
CONFIG_NX_BLOCKING=y
|
||||
CONFIG_NX_MXSERVERMSGS=32
|
||||
CONFIG_NX_MXCLIENTMSGS=16
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=3
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_BINFMT_EXEPATH is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
CONFIG_SCHED_WORKQUEUE=y
|
||||
CONFIG_SCHED_HPWORK=y
|
||||
CONFIG_SCHED_WORKPRIORITY=192
|
||||
CONFIG_SCHED_WORKPERIOD=50000
|
||||
CONFIG_SCHED_WORKSTACKSIZE=2048
|
||||
# CONFIG_SCHED_LPWORK is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
CONFIG_CXX_NEWLONG=y
|
||||
|
||||
#
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
# CONFIG_UCLIBCXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
# CONFIG_NSH_DISABLE_DD is not set
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
# CONFIG_NSH_DISABLE_MKFATFS is not set
|
||||
# CONFIG_NSH_DISABLE_MKFIFO is not set
|
||||
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PING is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
CONFIG_NXWIDGETS=y
|
||||
|
||||
#
|
||||
# NX Server/Device Configuration
|
||||
#
|
||||
CONFIG_NXWIDGETS_FLICKERFREE=y
|
||||
CONFIG_NXWIDGETS_DEVNO=0
|
||||
CONFIG_NXWIDGETS_VPLANE=0
|
||||
CONFIG_NXWIDGETS_SERVERPRIO=110
|
||||
CONFIG_NXWIDGETS_SERVERSTACK=1596
|
||||
CONFIG_NXWIDGETS_CLIENTPRIO=100
|
||||
CONFIG_NXWIDGETS_LISTENERPRIO=100
|
||||
CONFIG_NXWIDGETS_LISTENERSTACK=1596
|
||||
# CONFIG_NXWIDGETS_EXTERNINIT is not set
|
||||
# CONFIG_NXWIDGET_EVENTWAIT is not set
|
||||
|
||||
#
|
||||
# NXWidget Configuration
|
||||
#
|
||||
CONFIG_NXWIDGETS_BPP=16
|
||||
CONFIG_NXWIDGETS_SIZEOFCHAR=1
|
||||
|
||||
#
|
||||
# NXWidget Default Values
|
||||
#
|
||||
# CONFIG_NXWIDGETS_SYSTEM_CUSTOM_FONTID is not set
|
||||
CONFIG_NXWIDGETS_TNXARRAY_INITIALSIZE=16
|
||||
CONFIG_NXWIDGETS_TNXARRAY_SIZEINCREMENT=8
|
||||
# CONFIG_NXWIDGETS_CUSTOM_FILLCOLORS is not set
|
||||
# CONFIG_NXWIDGETS_CUSTOM_EDGECOLORS is not set
|
||||
# CONFIG_NXWIDGETS_CUSTOM_TEXTCOLORS is not set
|
||||
CONFIG_NXWIDGETS_TRANSPARENT_COLOR=0x0
|
||||
|
||||
#
|
||||
# Keypad behavior
|
||||
#
|
||||
CONFIG_NXWIDGETS_FIRST_REPEAT_TIME=500
|
||||
CONFIG_NXWIDGETS_CONTINUE_REPEAT_TIME=200
|
||||
CONFIG_NXWIDGETS_DOUBLECLICK_TIME=350
|
||||
CONFIG_NXWIDGETS_KBDBUFFER_SIZE=16
|
||||
CONFIG_NXWIDGETS_CURSORCONTROL_SIZE=4
|
||||
# CONFIG_NXWIDGET_MEMMONITOR is not set
|
||||
CONFIG_NXWM=y
|
||||
|
||||
#
|
||||
# General settings
|
||||
#
|
||||
# CONFIG_NXWM_SYSTEM_CUSTOM_FONTID is not set
|
||||
CONFIG_NXWM_UNITTEST=y
|
||||
|
||||
#
|
||||
# Color configuration
|
||||
#
|
||||
# CONFIG_NXWM_CUSTOM_FILLCOLORS is not set
|
||||
# CONFIG_NXWM_CUSTOM_EDGECOLORS is not set
|
||||
# CONFIG_NXWM_CUSTOM_TEXTCOLORS is not set
|
||||
|
||||
#
|
||||
# Horizontal and vertical spacing of icons in the task bar
|
||||
#
|
||||
CONFIG_NXWM_TASKBAR_VSPACING=4
|
||||
CONFIG_NXWM_TASKBAR_HSPACING=4
|
||||
# CONFIG_NXWM_TASKBAR_TOP is not set
|
||||
# CONFIG_NXWM_TASKBAR_BOTTOM is not set
|
||||
CONFIG_NXWM_TASKBAR_LEFT=y
|
||||
# CONFIG_NXWM_TASKBAR_RIGHT is not set
|
||||
# CONFIG_NXWM_CUSTOM_TASKBAR_WIDTH is not set
|
||||
# CONFIG_NXWM_DISABLE_MINIMIZE is not set
|
||||
# CONFIG_NXWM_TASKBAR_NO_BORDER is not set
|
||||
|
||||
#
|
||||
# Tool Bar Configuration
|
||||
#
|
||||
# CONFIG_NXWM_CUSTOM_TOOLBAR_HEIGHT is not set
|
||||
|
||||
#
|
||||
# Background Image
|
||||
#
|
||||
# CONFIG_NXWM_DISABLE_BACKGROUND_IMAGE is not set
|
||||
CONFIG_NXWM_BACKGROUND_IMAGE=""
|
||||
|
||||
#
|
||||
# Application Window Configuration
|
||||
#
|
||||
# CONFIG_NXWM_CUSTOM_APPWINDOW_ICONS is not set
|
||||
|
||||
#
|
||||
# Start Window Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Horizontal and vertical spacing of icons in the task bar
|
||||
#
|
||||
CONFIG_NXWM_STARTWINDOW_VSPACING=4
|
||||
CONFIG_NXWM_STARTWINDOW_HSPACING=4
|
||||
# CONFIG_NXWM_CUSTOM_STARTWINDOW_ICON is not set
|
||||
CONFIG_NXWM_STARTWINDOW_MQNAME="/dev/nxwm"
|
||||
CONFIG_NXWM_STARTWINDOW_MXMSGS=32
|
||||
CONFIG_NXWM_STARTWINDOW_MXMPRIO=42
|
||||
CONFIG_NXWM_STARTWINDOW_PRIO=100
|
||||
CONFIG_NXWM_STARTWINDOW_STACKSIZE=1596
|
||||
|
||||
#
|
||||
# NxConsole Window Configuration
|
||||
#
|
||||
CONFIG_NXWM_NXCONSOLE_PRIO=100
|
||||
CONFIG_NXWM_NXCONSOLE_STACKSIZE=1596
|
||||
# CONFIG_NXWM_NXCONSOLE_CUSTOM_COLORS is not set
|
||||
# CONFIG_NXWM_NXCONSOLE_CUSTOM_FONTID is not set
|
||||
# CONFIG_NXWM_CUSTOM_NXCONSOLE_ICON is not set
|
||||
CONFIG_NXWM_TOUCHSCREEN=y
|
||||
|
||||
#
|
||||
# Touchscreen device settings
|
||||
#
|
||||
CONFIG_NXWM_TOUCHSCREEN_DEVNO=0
|
||||
CONFIG_NXWM_TOUCHSCREEN_DEVPATH="/dev/input0"
|
||||
CONFIG_NXWM_TOUCHSCREEN_SIGNO=5
|
||||
CONFIG_NXWM_TOUCHSCREEN_LISTENERPRIO=100
|
||||
CONFIG_NXWM_TOUCHSCREEN_LISTENERSTACK=1596
|
||||
CONFIG_NXWM_KEYBOARD=y
|
||||
|
||||
#
|
||||
# Keyboard device settings
|
||||
#
|
||||
CONFIG_NXWM_KEYBOARD_DEVPATH="/dev/console"
|
||||
CONFIG_NXWM_KEYBOARD_SIGNO=6
|
||||
CONFIG_NXWM_KEYBOARD_BUFSIZE=16
|
||||
CONFIG_NXWM_KEYBOARD_LISTENERPRIO=100
|
||||
CONFIG_NXWM_KEYBOARD_LISTENERSTACK=1024
|
||||
|
||||
#
|
||||
# Calibration display settings
|
||||
#
|
||||
# CONFIG_NXWM_CALIBRATION_CUSTOM_COLORS is not set
|
||||
# CONFIG_NXWM_CUSTOM_CALIBRATION_ICON is not set
|
||||
CONFIG_NXWM_CALIBRATION_SIGNO=5
|
||||
CONFIG_NXWM_CALIBRATION_LISTENERPRIO=100
|
||||
CONFIG_NXWM_CALIBRATION_LISTENERSTACK=1024
|
||||
|
||||
#
|
||||
# Hex Calculator display settings
|
||||
#
|
||||
# CONFIG_NXWM_HEXCALCULATOR_CUSTOM_COLORS is not set
|
||||
# CONFIG_NXWM_CUSTOM_HEXCALCULATOR_ICON is not set
|
||||
CONFIG_NXWM_HEXCALCULATOR_CUSTOM_FONTID=y
|
||||
CONFIG_NXWM_HEXCALCULATOR_FONTID=5
|
||||
# CONFIG_NXWM_MEDIAPLAYER is not set
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
74
configs/sam3u-ek/nxwm/setenv.sh
Executable file
74
configs/sam3u-ek/nxwm/setenv.sh
Executable file
@ -0,0 +1,74 @@
|
||||
#!/bin/bash
|
||||
# configs/sam3u-ek/nxwm/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
Loading…
Reference in New Issue
Block a user