tiva/lm3s: Fix nxstyle warnings
arch/arm/src/tiva/lm/lm3s_gpio.c:
* Fix nxstyle warnings. No functional changes.
arch/arm/src/tiva/lm/lm3s_gpio.h:
* Fix nxstyle warnings. No functional changes.
This commit is contained in:
Nathan Hartman
Alan Carvalho de Assis
parent
2e4ec442ad
commit
8eec165aab
@ -611,12 +611,12 @@ static inline void tiva_interrupt(pinconfig_t pinconfig)
|
||||
}
|
||||
|
||||
/* "The GPIO IBE register is the interrupt both-edges register. When the
|
||||
* corresponding bit in the GPIO Interrupt Sense (GPIO IS) register ... is
|
||||
* set to detect edges, bits set to High in GPIO IBE configure the
|
||||
* corresponding bit in the GPIO Interrupt Sense (GPIO IS) register ...
|
||||
* is set to detect edges, bits set to High in GPIO IBE configure the
|
||||
* corresponding pin to detect both rising and falling edges, regardless
|
||||
* of the corresponding bit in the GPIO Interrupt Event (GPIO IEV) register ...
|
||||
* Clearing a bit configures the pin to be controlled by GPIOIEV. All bits
|
||||
* are cleared by a reset.
|
||||
* of the corresponding bit in the GPIO Interrupt Event (GPIO IEV)
|
||||
* register ... Clearing a bit configures the pin to be controlled by
|
||||
* GPIOIEV. All bits are cleared by a reset.
|
||||
*/
|
||||
|
||||
modifyreg32(base + TIVA_GPIO_IBE_OFFSET, ibeclr, ibeset);
|
||||
@ -629,12 +629,12 @@ static inline void tiva_interrupt(pinconfig_t pinconfig)
|
||||
|
||||
modifyreg32(base + TIVA_GPIO_IS_OFFSET, isclr, isset);
|
||||
|
||||
/* "The GPIOIEV register is the interrupt event register. Bits set to
|
||||
* High in GPIO IEV configure the corresponding pin to detect rising edges
|
||||
* or high levels, depending on the corresponding bit value in the GPIO
|
||||
* Interrupt Sense (GPIO IS) register... Clearing a bit configures the pin to
|
||||
* detect falling edges or low levels, depending on the corresponding bit
|
||||
* value in GPIOIS. All bits are cleared by a reset.
|
||||
/* "The GPIOIEV register is the interrupt event register. Bits set to High
|
||||
* in GPIO IEV configure the corresponding pin to detect rising edges or
|
||||
* high levels, depending on the corresponding bit value in the GPIO
|
||||
* Interrupt Sense (GPIO IS) register... Clearing a bit configures the
|
||||
* pin to detect falling edges or low levels, depending on the
|
||||
* corresponding bit value in GPIOIS. All bits are cleared by a reset.
|
||||
*/
|
||||
|
||||
modifyreg32(base + TIVA_GPIO_IEV_OFFSET, ievclr, ievset);
|
||||
@ -750,9 +750,9 @@ int tiva_configgpio(pinconfig_t pinconfig)
|
||||
tiva_portcontrol(base, pinno, pinconfig, &g_funcbits[0]);
|
||||
#endif
|
||||
|
||||
/* Then set up pad strengths and pull-ups. These setups should be done before
|
||||
* setting up the function because some function settings will over-ride these
|
||||
* user options.
|
||||
/* Then set up pad strengths and pull-ups. These setups should be done
|
||||
* before setting up the function because some function settings will
|
||||
* over-ride these user options.
|
||||
*/
|
||||
|
||||
tiva_gpiopadstrength(base, pin, pinconfig);
|
||||
@ -810,17 +810,18 @@ void tiva_gpiowrite(pinconfig_t pinconfig, bool value)
|
||||
|
||||
/* "The GPIO DATA register is the data register. In software control mode,
|
||||
* values written in the GPIO DATA register are transferred onto the GPIO
|
||||
* port pins if the respective pins have been configured as outputs through
|
||||
* the GPIO Direction (GPIO DIR) register ...
|
||||
* port pins if the respective pins have been configured as outputs
|
||||
* through the GPIO Direction (GPIO DIR) register ...
|
||||
*
|
||||
* "In order to write to GPIO DATA, the corresponding bits in the mask,
|
||||
* resulting from the address bus bits [9:2], must be High. Otherwise, the
|
||||
* bit values remain unchanged by the write.
|
||||
* resulting from the address bus bits [9:2], must be High. Otherwise,
|
||||
* the bit values remain unchanged by the write.
|
||||
*
|
||||
* "... All bits are cleared by a reset."
|
||||
*/
|
||||
|
||||
putreg32((uint32_t)value << pinno, base + TIVA_GPIO_DATA_OFFSET + (1 << (pinno + 2)));
|
||||
putreg32((uint32_t)value << pinno,
|
||||
base + TIVA_GPIO_DATA_OFFSET + (1 << (pinno + 2)));
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
@ -846,18 +847,19 @@ bool tiva_gpioread(pinconfig_t pinconfig)
|
||||
|
||||
base = tiva_gpiobaseaddress(port);
|
||||
|
||||
/* "... the values read from this register are determined for each bit
|
||||
* by the mask bit derived from the address used to access the data register,
|
||||
* bits [9:2]. Bits that are 1 in the address mask cause the corresponding
|
||||
* bits in GPIODATA to be read, and bits that are 0 in the address mask cause
|
||||
* the corresponding bits in GPIO DATA to be read as 0, regardless of their
|
||||
* value.
|
||||
/* "... the values read from this register are determined for each bit by
|
||||
* the mask bit derived from the address used to access the data
|
||||
* register, bits [9:2]. Bits that are 1 in the address mask cause the
|
||||
* corresponding bits in GPIODATA to be read, and bits that are 0 in the
|
||||
* address mask cause the corresponding bits in GPIO DATA to be read as
|
||||
* 0, regardless of their value.
|
||||
*
|
||||
* "A read from GPIO DATA returns the last bit value written if the respective
|
||||
* pins are configured as outputs, or it returns the value on the
|
||||
* corresponding input pin when these are configured as inputs. All bits
|
||||
* are cleared by a reset."
|
||||
* "A read from GPIO DATA returns the last bit value written if the
|
||||
* respective pins are configured as outputs, or it returns the value on
|
||||
* the corresponding input pin when these are configured as inputs. All
|
||||
* bits are cleared by a reset."
|
||||
*/
|
||||
|
||||
return (getreg32(base + TIVA_GPIO_DATA_OFFSET + (1 << (pinno + 2))) != 0);
|
||||
}
|
||||
|
||||
@ -906,5 +908,6 @@ void tiva_gpio_lockport(pinconfig_t pinconfig, bool lock)
|
||||
|
||||
/* Restrict access to the TIVA_GPIO_CR_OFFSET register */
|
||||
|
||||
modifyreg32(base + TIVA_GPIO_LOCK_OFFSET, GPIO_LOCK_UNLOCK, GPIO_LOCK_LOCKED);
|
||||
modifyreg32(base + TIVA_GPIO_LOCK_OFFSET, GPIO_LOCK_UNLOCK,
|
||||
GPIO_LOCK_LOCKED);
|
||||
}
|
||||
|
||||
@ -213,7 +213,8 @@
|
||||
# define GPIO_ALT_15 (15 << GPIO_ALT_SHIFT)
|
||||
#endif
|
||||
|
||||
/* If the pin is an GPIO digital output, then this identifies the initial output value:
|
||||
/* If the pin is an GPIO digital output, then this identifies the initial
|
||||
* output value:
|
||||
* .... .... .... .... .... ...V .... ....
|
||||
*/
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user