diff --git a/configs/teensy-3.x/Kconfig b/configs/teensy-3.x/Kconfig new file mode 100644 index 0000000000..ae2bf31307 --- /dev/null +++ b/configs/teensy-3.x/Kconfig @@ -0,0 +1,4 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# diff --git a/configs/teensy-3.x/include/board.h b/configs/teensy-3.x/include/board.h index e4b6d7c3d0..2a3cbb94b0 100644 --- a/configs/teensy-3.x/include/board.h +++ b/configs/teensy-3.x/include/board.h @@ -138,12 +138,12 @@ /* LED index values for use with sam_setled() */ -#define BOARD_STATUS_LED 0 +#define BOARD_LED 0 #define BOARD_NLEDS 1 /* LED bits for use with sam_setleds() */ -#define BOARD_STATUS LED_BIT (1 << BOARD_STATUS_LED) +#define BOARD_LED_BIT (1 << BOARD_LED) /* When CONFIG_ARCH_LEDS is defined in the NuttX configuration, NuttX will * control the LED as defined below. Thus if the LED is statically on, NuttX has @@ -165,7 +165,40 @@ /* The teensy-3.1 board has no standard GPIO contact buttons */ /* Alternative pin resolution *******************************************************/ -/* To be provided */ +/* The K20 has three UARTs with pin availability as follows: + * + * --------- ------ ----------- ------------------------- + * UART PORT BOARD PJRC PINOUT DESCRIPTION + * FUNCTION LABEL + * --------- ------ ----------- ------------------------- + * UART0_RX PTA1 (See above) MINI54TAN / Bootloader + * PTB16 Pin 0 RX1 / Touch + * PTD6 Pin 21 / A7 RX1 / CS / PWM + * UART0_TX PTA2 (See above) MINI54TAN / Bootloader + * PTB17 Pin 1 TX1 / Touch + * PTD7 Pin 5 TX1 / PWM + * --------- ------ ----------- ------------------------- + * UART1_RX PTC3 Pin 9 RX2 / CS / PWM + * PTE1 Pad 26 (Pad on back of board) + * UART1_TX PTC4 Pin 10 TX2 / CS / PWM + * PTE0 Pad 31 (Pad on back of board) + * --------- ------ ----------- ------------------------- + * UART2_RX PTD2 Pin 7 RX3 / DOUT + * UART2_TX PTD3 Pin 8 TX3 / DIN + * --------- ------ ----------- ------------------------- + * + * The default serial console is UART0 on pins 0 (RX) and 1 (TX). + */ + +#ifdef CONFIG_KINETIS_UART0 +# define PIN_UART0_RX PIN_UART0_RX_2 +# define PIN_UART0_TX PIN_UART0_TX_2 +#endif + +#ifdef CONFIG_KINETIS_UART1 +# define PIN_UART0_RX PIN_UART1_RX_1 +# define PIN_UART0_TX PIN_UART1_TX_1 +#endif /************************************************************************************ * Public Data diff --git a/configs/teensy-3.x/nsh/Make.defs b/configs/teensy-3.x/nsh/Make.defs new file mode 100644 index 0000000000..b11556a1bc --- /dev/null +++ b/configs/teensy-3.x/nsh/Make.defs @@ -0,0 +1,112 @@ +############################################################################ +# configs/teensy-3.1/nsh/Make.defs +# +# Copyright (C) 2015 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +LDSCRIPT = flash.ld + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/configs/teensy-3.x/nsh/defconfig b/configs/teensy-3.x/nsh/defconfig new file mode 100644 index 0000000000..3c2b2384a9 --- /dev/null +++ b/configs/teensy-3.x/nsh/defconfig @@ -0,0 +1,813 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX is not set +CONFIG_ARCH_CHIP_KINETIS=y +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM3 is not set +CONFIG_ARCH_CORTEXM4=y +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="kinetis" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_FPU=y +# CONFIG_ARCH_HAVE_DPFPU is not set +# CONFIG_ARCH_FPU is not set +# CONFIG_ARMV7M_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW is not set +# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y +# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set +# CONFIG_ARMV7M_HAVE_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set + +# +# Kinetis Configuration Options +# +CONFIG_ARCH_CHIP_MK20DX256VLH7=y +# CONFIG_ARCH_CHIP_MK40N512VLQ100 is not set +# CONFIG_ARCH_CHIP_MK40N512VMD100 is not set +# CONFIG_ARCH_CHIP_MK40X128VLQ100 is not set +# CONFIG_ARCH_CHIP_MK40X128VMD100 is not set +# CONFIG_ARCH_CHIP_MK40X256VLQ100 is not set +# CONFIG_ARCH_CHIP_MK40X256VMD100 is not set +# CONFIG_ARCH_CHIP_MK60N256VLQ100 is not set +# CONFIG_ARCH_CHIP_MK60N256VMD100 is not set +# CONFIG_ARCH_CHIP_MK60N512VLQ100 is not set +# CONFIG_ARCH_CHIP_MK60N512VMD100 is not set +# CONFIG_ARCH_CHIP_MK60X256VLQ100 is not set +# CONFIG_ARCH_CHIP_MK60X256VMD100 is not set +CONFIG_ARCH_FAMILY_K20=y +# CONFIG_ARCH_FAMILY_K40 is not set +# CONFIG_ARCH_FAMILY_K60 is not set + +# +# Kinetis Peripheral Support +# +# CONFIG_KINETIS_TRACE is not set +# CONFIG_KINETIS_FLEXBUS is not set +CONFIG_KINETIS_UART0=y +# CONFIG_KINETIS_UART1 is not set +# CONFIG_KINETIS_UART2 is not set +# CONFIG_KINETIS_UART3 is not set +# CONFIG_KINETIS_UART4 is not set +# CONFIG_KINETIS_UART5 is not set +# CONFIG_KINETIS_FLEXCAN0 is not set +# CONFIG_KINETIS_FLEXCAN1 is not set +# CONFIG_KINETIS_SPI0 is not set +# CONFIG_KINETIS_SPI1 is not set +# CONFIG_KINETIS_SPI2 is not set +# CONFIG_KINETIS_I2C0 is not set +# CONFIG_KINETIS_I2C1 is not set +# CONFIG_KINETIS_I2S is not set +# CONFIG_KINETIS_DAC0 is not set +# CONFIG_KINETIS_DAC1 is not set +# CONFIG_KINETIS_ADC0 is not set +# CONFIG_KINETIS_ADC1 is not set +# CONFIG_KINETIS_CMP is not set +# CONFIG_KINETIS_VREF is not set +# CONFIG_KINETIS_SDHC is not set +# CONFIG_KINETIS_FTM0 is not set +# CONFIG_KINETIS_FTM1 is not set +# CONFIG_KINETIS_FTM2 is not set +# CONFIG_KINETIS_LPTIMER is not set +# CONFIG_KINETIS_RTC is not set +# CONFIG_KINETIS_EWM is not set +# CONFIG_KINETIS_CMT is not set +# CONFIG_KINETIS_USBOTG is not set +# CONFIG_KINETIS_USBDCD is not set +# CONFIG_KINETIS_LLWU is not set +# CONFIG_KINETIS_TSI is not set +# CONFIG_KINETIS_FTFL is not set +# CONFIG_KINETIS_DMA is not set +# CONFIG_KINETIS_CRC is not set +# CONFIG_KINETIS_PDB is not set +# CONFIG_KINETIS_PIT is not set + +# +# Kinetis GPIO Interrupt Configuration +# +# CONFIG_GPIO_IRQ is not set + +# +# Kinetis UART Configuration +# +CONFIG_KINETIS_UARTFIFOS=y + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_USE_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +CONFIG_ARCH_RAMFUNCS=y +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x1fff8000 +CONFIG_RAM_SIZE=65536 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_TEENSY_3X=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="teensy-3.x" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# +# CONFIG_LIB_BOARDCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2011 +CONFIG_START_MONTH=12 +CONFIG_START_DAY=6 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=16 +CONFIG_WDOG_INTRESERVE=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +CONFIG_TASK_NAME_SIZE=0 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 + +# +# Work Queue Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_HPWORK is not set +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_PWM is not set +# CONFIG_ARCH_HAVE_I2CRESET is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_OWNBUS is not set +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_SPI_CALLBACK is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +# CONFIG_ARCH_HAVE_UART is not set +CONFIG_ARCH_HAVE_UART0=y +# CONFIG_ARCH_HAVE_UART1 is not set +# CONFIG_ARCH_HAVE_UART2 is not set +# CONFIG_ARCH_HAVE_UART3 is not set +# CONFIG_ARCH_HAVE_UART4 is not set +# CONFIG_ARCH_HAVE_UART5 is not set +# CONFIG_ARCH_HAVE_UART6 is not set +# CONFIG_ARCH_HAVE_UART7 is not set +# CONFIG_ARCH_HAVE_UART8 is not set +# CONFIG_ARCH_HAVE_SCI0 is not set +# CONFIG_ARCH_HAVE_SCI1 is not set +# CONFIG_ARCH_HAVE_USART0 is not set +# CONFIG_ARCH_HAVE_USART1 is not set +# CONFIG_ARCH_HAVE_USART2 is not set +# CONFIG_ARCH_HAVE_USART3 is not set +# CONFIG_ARCH_HAVE_USART4 is not set +# CONFIG_ARCH_HAVE_USART5 is not set +# CONFIG_ARCH_HAVE_USART6 is not set +# CONFIG_ARCH_HAVE_USART7 is not set +# CONFIG_ARCH_HAVE_USART8 is not set +# CONFIG_ARCH_HAVE_OTHER_UART is not set + +# +# USART Configuration +# +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_ARCH_HAVE_SERIAL_TERMIOS is not set +# CONFIG_UART0_SERIAL_CONSOLE is not set +# CONFIG_OTHER_SERIAL_CONSOLE is not set +CONFIG_NO_SERIAL_CONSOLE=y + +# +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_CONSOLE is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_FS_READABLE is not set +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +# CONFIG_FS_PROCFS is not set +# CONFIG_FS_UNIONFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG is not set +# CONFIG_SYSLOG_TIMESTAMP is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_IOCTL_VARIADIC is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CPUHOG is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_WEBSERVER is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +# CONFIG_NSH_CMDOPT_HEXDUMP is not set +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_INIFILE is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_SYSTEM_POWEROFF is not set +# CONFIG_SYSTEM_RAMTRON is not set +# CONFIG_SYSTEM_SDCARD is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_SYSINFO is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/teensy-3.x/nsh/setenv.sh b/configs/teensy-3.x/nsh/setenv.sh new file mode 100755 index 0000000000..c9fa4636cb --- /dev/null +++ b/configs/teensy-3.x/nsh/setenv.sh @@ -0,0 +1,80 @@ +#!/bin/bash +# configs/teensy-3.1/nsh/setenv.sh +# +# Copyright (C) 2015 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the RIDE +# toolchain under windows. You will also have to edit this if you install +# the RIDE toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" + +# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors" +# You can this free toolchain here https://launchpad.net/gcc-arm-embedded +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2014q4/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH variable +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/configs/teensy-3.x/scripts/flash.ld b/configs/teensy-3.x/scripts/flash.ld new file mode 100644 index 0000000000..742ea90c9e --- /dev/null +++ b/configs/teensy-3.x/scripts/flash.ld @@ -0,0 +1,141 @@ +/**************************************************************************** + * configs/teensy-3.x/scripts/flash.ld + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The K20X256VLQ100 has 256Kb of FLASH beginning at address 0x0000:0000 and + * 64Kb of SRAM beginning at address 0x1c00:0000 (SRAM_L) and 0x2000:000 + * bitband region (SRAM_U). + * + * NOTE: that the first part of the K20 FLASH region is reserved for + * interrupt vectflash and, following that, is a region from 0x0000:0400 + * to 0x0000:040f that is reserved for the FLASH control fields (FCF). + * + * NOTE: The on-chip RAM is split evenly among SRAM_L and SRAM_U. The RAM is + * also implemented such that the SRAM_L and SRAM_U ranges form a + * contiguous block in the memory map. + */ + +MEMORY +{ + vectflash (rx) : ORIGIN = 0x00000000, LENGTH = 1K - 16 + cfmprotect (rx) : ORIGIN = 0x00000400, LENGTH = 16 + progflash (rx) : ORIGIN = 0x00000800, LENGTH = 256K - 2K + datasram (rwx) : ORIGIN = 0x1fff8000, LENGTH = 64K +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .vectors : { + _svectors = ABSOLUTE(.); + *(.vectors) + _evectors = ABSOLUTE(.); + } > vectflash + + .cfmprotect : { + *(.cfmconfig) + } > cfmprotect + + .text : { + _stext = ABSOLUTE(.); + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > progflash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > progflash + + .ARM.extab : { + *(.ARM.extab*) + } > progflash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > progflash + __exidx_end = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > datasram AT > progflash + + _eronly = LOADADDR(.data); + + .ramfunc ALIGN(4): { + _sramfuncs = ABSOLUTE(.); + *(.ramfunc .ramfunc.*) + _eramfuncs = ABSOLUTE(.); + } > datasram AT > progflash + + _framfuncs = LOADADDR(.ramfunc); + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > datasram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/teensy-3.x/src/.gitignore b/configs/teensy-3.x/src/.gitignore new file mode 100644 index 0000000000..726d936e1e --- /dev/null +++ b/configs/teensy-3.x/src/.gitignore @@ -0,0 +1,2 @@ +/.depend +/Make.dep diff --git a/configs/teensy-3.x/src/Makefile b/configs/teensy-3.x/src/Makefile new file mode 100644 index 0000000000..99b549a8f9 --- /dev/null +++ b/configs/teensy-3.x/src/Makefile @@ -0,0 +1,91 @@ +############################################################################ +# configs/teensy-3.x/src/Makefile +# +# Copyright (C) 2015 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +CFLAGS += -I$(TOPDIR)/sched + +ASRCS = +AOBJS = $(ASRCS:.S=$(OBJEXT)) + +CSRCS = k20_boot.c k20_spi.c + +ifeq ($(CONFIG_ARCH_LEDS),y) +CSRCS += k20_autoleds.c +endif + +ifeq ($(CONFIG_NSH_ARCHINIT),y) +CSRCS += k20_nsh.c +endif + +COBJS = $(CSRCS:.c=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) +OBJS = $(AOBJS) $(COBJS) + +ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src +ifeq ($(WINTOOL),y) + CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \ + -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}" +else + CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m +endif + +all: libboard$(LIBEXT) + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +libboard$(LIBEXT): $(OBJS) + $(call ARCHIVE, $@, $(OBJS)) + +.depend: Makefile $(SRCS) + $(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep + $(Q) touch $@ + +depend: .depend +clean: + $(call DELFILE, libboard$(LIBEXT)) + $(call CLEAN) + +distclean: clean + $(call DELFILE, Make.dep) + $(call DELFILE, .depend) + +-include Make.dep diff --git a/configs/teensy-3.x/src/k20_autoleds.c b/configs/teensy-3.x/src/k20_autoleds.c new file mode 100644 index 0000000000..2fb385982f --- /dev/null +++ b/configs/teensy-3.x/src/k20_autoleds.c @@ -0,0 +1,115 @@ +/**************************************************************************** + * configs/teensy-3.x/src/k20_autoleds.c + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include + +#include "kinetis_internal.h" +#include "teensy-3x.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG + * with CONFIG_DEBUG_VERBOSE too) + */ + +#ifdef CONFIG_DEBUG_LEDS +# define leddbg lldbg +# define ledvdbg llvdbg +#else +# define leddbg(x...) +# define ledvdbg(x...) +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_led_initialize + * + * Description: + * Initialize LED GPIOs so that LEDs can be controlled. + * + ****************************************************************************/ + +#ifdef CONFIG_ARCH_LEDS +void board_led_initialize(void) +{ + kinetis_pinconfig(GPIO_LED); +} + +/**************************************************************************** + * Name: board_led_on + ****************************************************************************/ + +void board_led_on(int led) +{ + if (led != 2) + { + kinetis_gpiowrite(GPIO_LED, (led != 0)); + } +} + +/**************************************************************************** + * Name: board_led_off + ****************************************************************************/ + +void board_led_off(int led) +{ + if (led != 2) + { + kinetis_gpiowrite(GPIO_LED, false); + } +} + +#endif /* CONFIG_ARCH_LEDS */ diff --git a/configs/teensy-3.x/src/k20_boot.c b/configs/teensy-3.x/src/k20_boot.c new file mode 100644 index 0000000000..4d77b845f4 --- /dev/null +++ b/configs/teensy-3.x/src/k20_boot.c @@ -0,0 +1,90 @@ +/************************************************************************************ + * configs/teensy-3.x/src/k20_boot.c + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include +#include + +#include "up_arch.h" +#include "teensy-3x.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: kinetis_boardinitialize + * + * Description: + * All Kinetis architectures must provide the following entry point. This entry + * point is called early in the initialization -- after all memory has been + * configured and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void kinetis_boardinitialize(void) +{ +#if defined(CONFIG_KINETIS_SPI1) || defined(CONFIG_KINETIS_SPI2) + /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function + * kinetis_spiinitialize() has been brought into the link. + */ + + if (kinetis_spiinitialize) + { + kinetis_spiinitialize(); + } +#endif + +#ifdef CONFIG_ARCH_LEDS + /* Configure on-board LEDs if LED support has been selected. */ + + board_led_initialize(); +#endif +} diff --git a/configs/teensy-3.x/src/k20_nsh.c b/configs/teensy-3.x/src/k20_nsh.c new file mode 100644 index 0000000000..4199f45b9b --- /dev/null +++ b/configs/teensy-3.x/src/k20_nsh.c @@ -0,0 +1,78 @@ +/**************************************************************************** + * config/teensy-3.x/src/k20_nsh.c + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include "teensy-3x.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ +/* Configuration ************************************************************/ + +/**************************************************************************** + * Private Types + ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_app_initialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +int board_app_initialize(void) +{ + return OK; +} diff --git a/configs/teensy-3.x/src/k20_spi.c b/configs/teensy-3.x/src/k20_spi.c new file mode 100644 index 0000000000..bf9c47479f --- /dev/null +++ b/configs/teensy-3.x/src/k20_spi.c @@ -0,0 +1,163 @@ +/************************************************************************************ + * configs/teensy-3.x/src/k20_spi.c + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include + +#include +#include + +#include "up_arch.h" +#include "chip.h" +#include "kinetis_internal.h" +#include "teensy-3x.h" + +#if defined(CONFIG_KINETIS_SPI1) || defined(CONFIG_KINETIS_SPI2) + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Enables debug output from this file (needs CONFIG_DEBUG too) */ + +#ifdef CONFIG_DEBUG_SPI +# define spidbg lldbg +# ifdef CONFIG_DEBUG_SPI_VERBOSE +# define spivdbg lldbg +# else +# define spivdbg(x...) +# endif +#else +# undef CONFIG_DEBUG_SPI_VERBOSE +# define spidbg(x...) +# define spivdbg(x...) +#endif + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: kinetis_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the KwikStik-K40 board. + * + ************************************************************************************/ + +void weak_function kinetis_spiinitialize(void) +{ +# warning "Missing logic" +} + +/************************************************************************************ + * Name: kinetis_spi1/2/3select and kinetis_spi1/2/3status + * + * Description: + * The external functions, kinetis_spi1/2/3select and kinetis_spi1/2/3status must be + * provided by board-specific logic. They are implementations of the select + * and status methods of the SPI interface defined by struct spi_ops_s (see + * include/nuttx/spi/spi.h). All other methods (including up_spiinitialize()) + * are provided by common Kinetis logic. To use this common SPI logic on your + * board: + * + * 1. Provide logic in kinetis_boardinitialize() to configure SPI chip select + * pins. + * 2. Provide kinetis_spi1/2/3select() and kinetis_spi1/2/3status() functions in your + * board-specific logic. These functions will perform chip selection and + * status operations using GPIOs in the way your board is configured. + * 3. Add a calls to up_spiinitialize() in your low level application + * initialization logic + * 4. The handle returned by up_spiinitialize() may then be used to bind the + * SPI driver to higher level logic (e.g., calling + * mmcsd_spislotinitialize(), for example, will bind the SPI driver to + * the SPI MMC/SD driver). + * + ************************************************************************************/ + +#ifdef CONFIG_KINETIS_SPI1 +void kinetis_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +{ + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); +# warning "Missing logic" +} + +uint8_t kinetis_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +{ +# warning "Missing logic" + return SPI_STATUS_PRESENT; +} +#endif + +#ifdef CONFIG_KINETIS_SPI2 +void kinetis_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +{ + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); +# warning "Missing logic" +} + +uint8_t kinetis_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +{ +# warning "Missing logic" + return SPI_STATUS_PRESENT; +} +#endif + +#ifdef CONFIG_KINETIS_SPI3 +void kinetis_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected) +{ + spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert"); +# warning "Missing logic" +} + +uint8_t kinetis_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid) +{ +# warning "Missing logic" + return SPI_STATUS_PRESENT; +} +#endif + +#endif /* CONFIG_KINETIS_SPI1 || CONFIG_KINETIS_SPI2 */ diff --git a/configs/teensy-3.x/src/teensy-3x.h b/configs/teensy-3.x/src/teensy-3x.h new file mode 100644 index 0000000000..b8823cadcb --- /dev/null +++ b/configs/teensy-3.x/src/teensy-3x.h @@ -0,0 +1,106 @@ +/************************************************************************************ + * configs/teensy-3.x/src/teensy-3x.h + * + * Copyright (C) 2015 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIGS_TEENSY_3X_SRC_TEENSY_3X_H +#define __CONFIGS_TEENSY_3X_SRC_TEENSY_3X_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include +#include +#include + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI + * modules (others may support more -- in such case, the following must be + * expanded). + */ + +#if KINETIS_NSPI < 1 +# undef CONFIG_KINETIS_SPI1 +# undef CONFIG_KINETIS_SPI2 +#elif KINETIS_NSPI < 2 +# undef CONFIG_KINETIS_SPI2 +#endif + +/* Teensy 3.1 GPIOs *****************************************************************/ +/* A single LED is available driven by PTC5. The LED is grounded so bringing PTC5 + * high will illuminate the LED. + */ + +#define GPIO_LED (GPIO_LOWDRIVE | GPIO_OUTPUT_ZER0 | PIN_PORTC | PIN5) + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: kinetis_spiinitialize + * + * Description: + * Called to configure SPI chip select GPIO pins for the KwikStik-K40 board. + * + ************************************************************************************/ + +extern void weak_function kinetis_spiinitialize(void); + +/************************************************************************************ + * Name: kinetis_usbinitialize + * + * Description: + * Called to setup USB-related GPIO pins for the KwikStik-K40 board. + * + ************************************************************************************/ + +extern void weak_function kinetis_usbinitialize(void); + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_TEENSY_3X_SRC_TEENSY_3X_H */ +