Prep for 6.1 release

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3489 42af7a65-404d-4744-a932-0658087f49c3

configs/README.txt

@@ -981,6 +981,11 @@ configs/lm3s6965-ek
     an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
     arm-elf toolchain*.  STATUS:  This port is complete and mature.
 
+configs/lpcxpresso-lpc1768
+    Embedded Artists base board with NXP LPCExpresso LPC1768.  This board
+    is based on the NXP LPC1768.  The Code Red toolchain is used by default.
+    STATUS:  Under development.
+
 configs/m68322evb
     This is a work in progress for the venerable m68322evb board from
     Motorola. This OS is also built with the arm-elf toolchain*.  STATUS:

configs/lpcxpresso-lpc1768/README.txt

@@ -215,6 +215,60 @@ Code Red IDE
   /cygdrive/c/nxp/lpcxpreeso_3.6/bin, and
   /cygdrive/c/nxp/lpcxpreeso_3.6/Tools/bin
 
+  Command Line Flash Programming
+  ------------------------------
+
+  If using LPCLink as your debug connection, first of all boot the LPC-Link using
+  the script:
+
+    bin\Scripts\bootLPCXpresso type
+
+  where type = winusb for Windows XP, or type = hid for Windows Vista / 7.
+
+  Now run the flash programming utility with the following options
+
+    flash_utility wire -ptarget -flash-load[-exec]=filename [-load-base=base_address]
+
+  Where flash_utility is one of:
+
+    crt_emu_lpc11_13 (for LPC11xx or LPC13xx parts)
+    crt_emu_cm3_nxp (for LPC17xx parts)
+    crt_emu_a7_nxp (for LPC21/22/23/24 parts)
+    crt_emu_a9_nxp (for LPC31/32 and LPC29xx parts)
+    crt_emu_cm3_lmi (for TI Stellaris LM3S parts
+
+  wire is one of:
+
+    (empty) (for Red Probe+, Red Probe, RDB1768v1, or TI Stellaris evaluation boards)
+    -wire=hid (for RDB1768v2 without upgraded firmware)
+    -wire=winusb (for RDB1768v2 with upgraded firmware)
+    -wire=winusb (for LPC-Link on Windows XP)
+    -wire=hid (for LPC-Link on Windows Vista/ Windows 7)
+
+  target is the target chip name. For example LPC1343, LPC1114/301, LPC1768 etc.
+
+  filename is the file to flash program. It may be an executable (axf) or a binary
+  (bin) file. If using a binary file, the base_address must be specified.
+
+  base_address is the base load address when flash programming a binary file. It
+  should be specified as a hex value with a leading 0x.
+
+  Note:
+  - flash-load will leave the processor in a stopped state
+  - flash-load-exec will start execution of application as soon as download has
+    completed.
+
+  Examples
+    To load the executable file app.axf and start it executing on an LPC1758
+	target using Red Probe, use the following command line:
+
+      crt_emu_cm3_nxp -pLPC1758 -flash-load-exec=app.axf
+
+    To load the binary file binary.bin to address 0x1000 to an LPC1343 target
+	using LPC-Link on Windows XP, use the following command line:
+
+      crt_emu_lpc11_13_nxp -wire=hid -pLPC1343 -flash-load=binary.bin -load-base=0x1000
+
 NuttX buildroot Toolchain
 ^^^^^^^^^^^^^^^^^^^^^^^^^
 

configs/lpcxpresso-lpc1768/tools/flash.sh

@@ -0,0 +1,127 @@
+#!/bin/bash
+####################################################################################
+# flash.sh
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+####################################################################################
+
+USAGE="$0 <nuttx-path>"
+echo "Assumptions:"
+echo ""
+echo "  - Windows 7"
+echo "  - LPCXpresso 4.6 installed at /cygdrive/c/nxp/lpcxpresso_3.6"
+echo "  - AXF image built with Code Red"
+echo "  - LPC17xx"
+echo ""
+echo "You will need to edit this is any of the above are false"
+
+# This is the default install location for binaries on Linux
+#BINDIR=/usr/local/LPCXpresso/bin/dfu-util
+
+# This is the default install location for binaries on Windows (note that this
+# path could change with the Code Red version number
+BINDIR=/cygdrive/c/nxp/lpcxpresso_3.6/bin
+
+# This is the default install location for DFUAPP.exe on Windows
+DFUAPP="$BINDIR/DFUAPP.exe"
+
+# ROM image for resetting LPC-Link
+# ROM=LPCXpressoWIN.enc # WinUSB
+# ROM=LPCXpressoFS.enc # Win2000
+# ROM=LPCXpressoFS.enc # WinXP
+# ROM=LPCXpressoFS.enc # Win2003
+# ROM=LPCXpressoHS.enc # WinVista
+ROM=LPCXpressoHS.enc # Win7
+
+ROMPATH=`cygpath -w "$BINDIR/$ROM"`
+
+# FLASHUTIL="$BINDIR/crt_emu_lpc11_13" # for LPC11xx or LPC13xx parts)
+FLASHUTIL="$BINDIR/crt_emu_cm3_nxp"  # for LPC17xx parts
+# FLASHUTIL="$BINDIR/crt_emu_a7_nxp"   # for LPC21/22/23/24 parts)
+# FLASHUTIL="$BINDIR/crt_emu_a9_nxp"   # for LPC31/32 and LPC29xx parts)
+# FLASHUTIL="$BINDIR/crt_emu_cm3_lmi"  # for TI Stellaris LM3S parts
+
+if [ ! -x "$FLASHUTIL" ]; then
+	echo "No executable file at ${FLASHUTIL}"
+	exit 1
+fi
+
+# unset WIRE          # for Red Probe+, Red Probe, RDB1768v1, or TI Stellaris evaluation boards
+# WIRE="-wire=hi"     # for RDB1768v2 without upgraded firmware)
+# WIRE="-wire=winusb" # for RDB1768v2 with upgraded firmware)
+# WIRE="-wire=winusb" # for LPC-Link on Windows XP)
+WIRE="-wire=hid"      # for LPC-Link on Windows Vista/ Windows 7)
+
+TARGET=LPC1768
+#TARGET=NXP_dir_part_LPC17
+
+# The nuttx directory must be provided as an argument
+
+NUTTX=$1
+if [ -z "${NUTTX}" ]; then
+	echo "Missing argument"
+	echo $USAGE
+	exit 1
+fi
+
+if [ ! -d "${NUTTX}" ]; then
+	echo "Directory ${NUTTX} does not exist"
+	echo $USAGE
+	exit 1
+fi
+
+# The binary to download:
+
+if [ ! -f "${NUTTX}/nuttx.axf" ]; then
+	if [ -f "${NUTTX}/nuttx" ]; then
+		echo "Renaming ${NUTTX}/nuttx to ${NUTTX}/nuttx.axf"
+		mv ${NUTTX}/nuttx ${NUTTX}/nuttx.axf
+	fi
+else
+	if [ -f "${NUTTX}/nuttx" ]; then
+		echo "Both ${NUTTX}/nuttx ${NUTTX}/nuttx.axf exist.."
+		echo "  Deleting ${NUTTX}/nuttx.axf"
+		rm -f ${NUTTX}/nuttx.axf
+		echo "Renaming ${NUTTX}/nuttx to ${NUTTX}/nuttx.axf"
+		mv ${NUTTX}/nuttx ${NUTTX}/nuttx.axf
+	fi
+fi
+
+# First of all boot the LPC-Link using the script:
+
+#${DFUAPP} /f ${ROMPATH} /tl 250 dfuapp.log
+
+# Then program the FLASH
+
+#${FLASHUTIL} ${WIRE} -p${TARGET} -flash-load="${NUTTX}/nuttx.axf"
+${FLASHUTIL} -p${TARGET} -flash-load="${NUTTX}/nuttx.axf"
+