sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add SSP driver

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2746 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-06-14 23:14:20 +00:00
parent 2b587ee7a8
commit 9207b2dee1
5 changed files with 904 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/src/lpc17xx/Make.defs
View File

@ -53,7 +53,7 @@ CMN_CSRCS = up_assert.c up_blocktask.c up_copystate.c up_createstack.c \
CHIP_ASRCS =
CHIP_CSRCS = lpc17_allocateheap.c lpc17_clockconfig.c lpc17_gpio.c \
lpc17_gpioint.c lpc17_irq.c lpc17_lowputc.c lpc17_serial.c \
lpc17_start.c lpc17_timerisr.c
lpc17_ssp.c lpc17_start.c lpc17_timerisr.c
# Configuration-dependent LPC17xx files

69
arch/arm/src/lpc17xx/lpc17_internal.h
View File

@ -205,7 +205,7 @@
#define GPIO_SSP1_MISO (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN8)
#define GPIO_MAT2p2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN8)
#define GPIO_I2S_TXSDA_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN9)
#define GPIO_MOSI1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN9)
#define GPIO_SSP1_MOSI (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN9)
#define GPIO_MAT2p3 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN9)
#define GPIO_UART2_TXD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN10)
#define GPIO_I2C2_SDA (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN10)
@ -224,7 +224,7 @@
#define GPIO_SPI_MISO (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN17)
#define GPIO_UART1_DCD_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN18)
#define GPIO_SSP0_MOSI_1 (GPIO_ALT2 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN18)
#define GPIO_MOSI (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN18)
#define GPIO_SPI_MOSI (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN18)
#define GPIO_UART1_DSR_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN19)
#define GPIO_I2C1_SDA_2 (GPIO_ALT3 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN19)
#define GPIO_UART1_DTR_1 (GPIO_ALT1 | GPIO_PULLUP | GPIO_PORT0 | GPIO_PIN20)
@ -495,6 +495,71 @@ EXTERN int lpc17_dumpgpio(uint32_t pinset, const char *msg);
# define lpc17_dumpgpio(p,m)
#endif
/************************************************************************************
* Name: lpc17_spi/ssp0/ssp1select and lpc17_spi/ssp0/ssp1status
*
* Description:
* The external functions, lpc17_spi/ssp0/ssp1select and lpc17_spi/ssp0/ssp1status
* must be provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
* are provided by common LPC17xx logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select
* pins.
* 2. Provide lpc17_spi/ssp0/ssp1select() and lpc17_spi/ssp0/ssp1status() functions
* in your board-specific logic. These functions will perform chip selection
* and status operations using GPIOs in the way your board is configured.
* 3. Add a calls to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
************************************************************************************/
struct spi_dev_s;
enum spi_dev_e;
#ifdef CONFIG_LPC17_SPI
EXTERN void lpc17_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t lpc17_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#endif
#ifdef CONFIG_LPC17_SSP0
EXTERN void lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#endif
#ifdef CONFIG_LPC17_SSP1
EXTERN void lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
EXTERN uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#endif
/****************************************************************************
* Name: ssp_flush
*
* Description:
* Flush and discard any words left in the RX fifo. This can be called
* from ssp0/1select after a device is deselected (if you worry about such
* things).
*
* Input Parameters:
* dev - Device-specific state data
*
* Returned Value:
* None
*
****************************************************************************/
struct spi_dev_s;
#ifdef CONFIG_LPC17_SPI
EXTERN void spi_flush(FAR struct spi_dev_s *dev);
#endif
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
EXTERN void ssp_flush(FAR struct spi_dev_s *dev);
#endif
#undef EXTERN
#if defined(__cplusplus)
}

815
arch/arm/src/lpc17xx/lpc17_ssp.c Executable file
View File

@ -0,0 +1,815 @@
/****************************************************************************
* arch/arm/src/lpc17xx/lpc17_ssp.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <errno.h>
#include <debug.h>
#include <arch/board/board.h>
#include <nuttx/arch.h>
#include <nuttx/spi.h>
#include "up_internal.h"
#include "up_arch.h"
#include "chip.h"
#include "lpc17_internal.h"
#include "lpc17_syscon.h"
#include "lpc17_pinconn.h"
#include "lpc17_ssp.h"
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
/****************************************************************************
* Definitions
****************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
#undef SSP_DEBUG /* Define to enable debug */
#undef SSP_VERBOSE /* Define to enable verbose debug */
#ifdef SSP_DEBUG
# define sspdbg lldbg
# ifdef SSP_VERBOSE
# define spivdbg lldbg
# else
# define spivdbg(x...)
# endif
#else
# undef SSP_VERBOSE
# define sspdbg(x...)
# define spivdbg(x...)
#endif
/* SSP Clocking.
*
* The CPU clock by 1, 2, 4, or 8 to get the SSP peripheral clock (SSP_CLOCK).
* SSP_CLOCK may be further divided by 2-254 to get the SSP clock. If we
* want a usable range of 4KHz to 25MHz for the SSP, then:
*
* 1. SSPCLK must be greater than (2*25MHz) = 50MHz, and
* 2. SSPCLK must be less than (254*40Khz) = 101.6MHz.
*
* If we assume that CCLK less than or equal to 100MHz, we can just
* use the CCLK undivided to get the SSP_CLOCK.
*/
#define SSP_PCLKSET_DIV SYSCON_PCLKSEL_CCLK
#define SSP_CLOCK LPC17_CCLK
/****************************************************************************
* Private Types
****************************************************************************/
struct lpc17_sspdev_s
{
struct spi_dev_s spidev; /* Externally visible part of the SPI interface */
uint32_t sspbase; /* SPIn base address */
#ifdef CONFIG_LPC17_SSP_INTERRUPTS
uint8_t sspirq; /* SPI IRQ number */
#endif
#ifndef CONFIG_SPI_OWNBUS
sem_t exclsem; /* Held while chip is selected for mutual exclusion */
uint32_t frequency; /* Requested clock frequency */
uint32_t actual; /* Actual clock frequency */
uint8_t nbits; /* Width of word in bits (8 or 16) */
uint8_t mode; /* Mode 0,1,2,3 */
#endif
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Helpers */
static inline uint32_t ssp_getreg(FAR struct lpc17_sspdev_s *priv, uint8_t offset);
static inline void ssp_putreg(FAR struct lpc17_sspdev_s *priv, uint8_t offset,
uint32_t value);
/* SPI methods */
#ifndef CONFIG_SPI_OWNBUS
static int ssp_lock(FAR struct spi_dev_s *dev, bool lock);
#endif
static void ssp_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected);
static uint32_t ssp_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency);
static void ssp_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode);
static void ssp_setbits(FAR struct spi_dev_s *dev, int nbits);
static uint16_t ssp_send(FAR struct spi_dev_s *dev, uint16_t ch);
static void ssp_sndblock(FAR struct spi_dev_s *dev, FAR const void *buffer, size_t nwords);
static void ssp_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t nwords);
/****************************************************************************
* Private Data
****************************************************************************/
#ifdef CONFIG_LPC17_SSP0
static const struct spi_ops_s g_spi0ops =
{
#ifndef CONFIG_SPI_OWNBUS
.lock = ssp_lock,
#endif
.select = lpc17_ssp0select,
.setfrequency = ssp_setfrequency,
.setmode = ssp_setmode,
.setbits = ssp_setbits,
.status = lpc17_ssp0status,
.send = ssp_send,
.sndblock = ssp_sndblock,
.recvblock = ssp_recvblock,
.registercallback = 0, /* Not implemented */
};
static struct lpc17_sspdev_s g_ssp0dev =
{
.spidev = { &g_spi0ops },
.sspbase = LPC17_SSP0_BASE,
#ifdef CONFIG_LPC17_SSP_INTERRUPTS
.sspirq = LPC17_IRQ_SSP0,
#endif
};
#endif /* CONFIG_LPC17_SSP0 */
#ifdef CONFIG_LPC17_SSP1
static const struct spi_ops_s g_spi1ops =
{
#ifndef CONFIG_SPI_OWNBUS
.lock = ssp_lock,
#endif
.select = lpc17_ssp1select,
.setfrequency = ssp_setfrequency,
.setmode = ssp_setmode,
.setbits = ssp_setbits,
.status = lpc17_ssp1status,
.send = ssp_send,
.sndblock = ssp_sndblock,
.recvblock = ssp_recvblock,
.registercallback = 0, /* Not implemented */
};
static struct lpc17_sspdev_s g_ssp1dev =
{
.spidev = { &g_spi1ops },
.sspbase = LPC17_SSP1_BASE,
#ifdef CONFIG_LPC17_SSP_INTERRUPTS
.sspirq = LPC17_IRQ_SSP1,
#endif
};
#endif /* CONFIG_LPC17_SSP1 */
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/************************************************************************************
* Name: ssp_getreg
*
* Description:
* Get the contents of the SPI register at offset
*
* Input Parameters:
* priv - private SPI device structure
* offset - offset to the register of interest
*
* Returned Value:
* The contents of the 32-bit register
*
************************************************************************************/
static inline uint32_t ssp_getreg(FAR struct lpc17_sspdev_s *priv, uint8_t offset)
{
return ssp_getreg(priv, priv->sspbase + offset);
}
/************************************************************************************
* Name: ssp_putreg
*
* Description:
* Write a 32-bit value to the SPI register at offset
*
* Input Parameters:
* priv - private SPI device structure
* offset - offset to the register of interest
* value - the 16-bit value to be written
*
* Returned Value:
* None
*
************************************************************************************/
static inline void ssp_putreg(FAR struct lpc17_sspdev_s *priv, uint8_t offset, uint32_t value)
{
putreg32(value, priv->sspbase + offset);
}
/****************************************************************************
* Name: ssp_lock
*
* Description:
* On SPI busses where there are multiple devices, it will be necessary to
* lock SPI to have exclusive access to the busses for a sequence of
* transfers. The bus should be locked before the chip is selected. After
* locking the SPI bus, the caller should then also call the setfrequency,
* setbits, and setmode methods to make sure that the SPI is properly
* configured for the device. If the SPI buss is being shared, then it
* may have been left in an incompatible state.
*
* Input Parameters:
* dev - Device-specific state data
* lock - true: Lock spi bus, false: unlock SPI bus
*
* Returned Value:
* None
*
****************************************************************************/
#ifndef CONFIG_SPI_OWNBUS
static int ssp_lock(FAR struct spi_dev_s *dev, bool lock)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
if (lock)
{
/* Take the semaphore (perhaps waiting) */
while (sem_wait(&priv->exclsem) != 0)
{
/* The only case that an error should occur here is if the wait was awakened
* by a signal.
*/
ASSERT(errno == EINTR);
}
}
else
{
(void)sem_post(&priv->exclsem);
}
return OK;
}
#endif
/****************************************************************************
* Name: ssp_setfrequency
*
* Description:
* Set the SPI frequency.
*
* Input Parameters:
* dev - Device-specific state data
* frequency - The SPI frequency requested
*
* Returned Value:
* Returns the actual frequency selected
*
****************************************************************************/
static uint32_t ssp_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
uint32_t divisor;
uint32_t actual;
/* Check if the requested frequence is the same as the frequency selection */
DEBUGASSERT(priv && frequency <= SSP_CLOCK / 2);
#ifndef CONFIG_SPI_OWNBUS
if (priv->frequency == frequency)
{
/* We are already at this frequency. Return the actual. */
return priv->actual;
}
#endif
/* frequency = SSP_CLOCK / divisor, or divisor = SSP_CLOCK / frequency */
divisor = SSP_CLOCK / frequency;
/* "In master mode, CPSDVSRmin = 2 or larger (even numbers only)" */
if (divisor < 2)
{
divisor = 2;
}
else if (divisor > 254)
{
divisor = 254;
}
divisor = (divisor + 1) & ~1;
/* Save the new divisor value */
ssp_putreg(priv, LPC17_SSP_CPSR_OFFSET, divisor);
/* Calculate the new actual */
actual = SSP_CLOCK / divisor;
/* Save the frequency setting */
#ifndef CONFIG_SPI_OWNBUS
priv->frequency = frequency;
priv->actual = actual;
#endif
sspdbg("Frequency %d->%d\n", frequency, actual);
return actual;
}
/****************************************************************************
* Name: ssp_setmode
*
* Description:
* Set the SPI mode. Optional. See enum spi_mode_e for mode definitions
*
* Input Parameters:
* dev - Device-specific state data
* mode - The SPI mode requested
*
* Returned Value:
* none
*
****************************************************************************/
static void ssp_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
uint32_t regval;
/* Has the mode changed? */
#ifndef CONFIG_SPI_OWNBUS
if (mode != priv->mode)
{
#endif
/* Yes... Set CR0 appropriately */
regval = ssp_getreg(priv, LPC17_SSP_CR0_OFFSET);
regval &= ~(SSP_CR0_CPOL|SSP_CR0_CPHA);
switch (mode)
{
case SPIDEV_MODE0: /* CPOL=0; CPHA=0 */
break;
case SPIDEV_MODE1: /* CPOL=0; CPHA=1 */
regval |= SSP_CR0_CPHA;
break;
case SPIDEV_MODE2: /* CPOL=1; CPHA=0 */
regval |= SSP_CR0_CPOL;
break;
case SPIDEV_MODE3: /* CPOL=1; CPHA=1 */
regval |= (SSP_CR0_CPOL|SSP_CR0_CPHA);
break;
default:
DEBUGASSERT(FALSE);
return;
}
ssp_putreg(priv, LPC17_SSP_CR0_OFFSET, regval);
/* Save the mode so that subsequent re-configuratins will be faster */
#ifndef CONFIG_SPI_OWNBUS
priv->mode = mode;
}
#endif
}
/****************************************************************************
* Name: ssp_setbits
*
* Description:
* Set the number if bits per word.
*
* Input Parameters:
* dev - Device-specific state data
* nbits - The number of bits requests
*
* Returned Value:
* none
*
****************************************************************************/
static void ssp_setbits(FAR struct spi_dev_s *dev, int nbits)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
uint32_t regval;
/* Has the number of bits changed? */
DEBUGASSERT(priv && nbits > 3 && nbits < 17);
#ifndef CONFIG_SPI_OWNBUS
if (nbits != priv->nbits)
{
#endif
/* Yes... Set CR1 appropriately */
regval = ssp_getreg(priv, LPC17_SSP_CR0_OFFSET);
regval &= ~SSP_CR0_DSS_MASK;
regval |= ((nbits - 1) << SSP_CR0_DSS_SHIFT);
regval = ssp_getreg(priv, LPC17_SSP_CR0_OFFSET);
/* Save the selection so the subsequence re-configurations will be faster */
#ifndef CONFIG_SPI_OWNBUS
priv->nbits = nbits;
}
#endif
}
/****************************************************************************
* Name: ssp_send
*
* Description:
* Exchange one word on SPI
*
* Input Parameters:
* dev - Device-specific state data
* wd - The word to send. the size of the data is determined by the
* number of bits selected for the SPI interface.
*
* Returned Value:
* response
*
****************************************************************************/
static uint16_t ssp_send(FAR struct spi_dev_s *dev, uint16_t wd)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
register uint16_t regval;
/* Wait while the TX FIFO is full */
while (!(ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_TNF));
/* Write the byte to the TX FIFO */
ssp_putreg(priv, LPC17_SSP_DR_OFFSET, (uint32_t)wd);
/* Wait for the RX FIFO not empty */
while (!(ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_RNE));
/* Get the value from the RX FIFO and return it */
regval = ssp_getreg(priv, LPC17_SSP_DR_OFFSET);
sspdbg("%04x->%04x\n", wd, regval);
return regval;
}
/*************************************************************************
* Name: ssp_sndblock
*
* Description:
* Send a block of data on SPI
*
* Input Parameters:
* dev - Device-specific state data
* buffer - A pointer to the buffer of data to be sent
* nwords - the length of data to send from the buffer in number of words.
* The wordsize is determined by the number of bits-per-word
* selected for the SPI interface. If nbits <= 8, the data is
* packed into uint8_t's; if nbits >8, the data is packed into uint16_t's
*
* Returned Value:
* None
*
****************************************************************************/
static void ssp_sndblock(FAR struct spi_dev_s *dev, FAR const void *buffer, size_t nwords)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
FAR const uint8_t *ptr = (FAR const uint8_t *)buffer;
uint8_t sr;
/* Loop while thre are bytes remaining to be sent */
sspdbg("nwords: %d\n", nwords);
while (nwords > 0)
{
/* While the TX FIFO is not full and there are bytes left to send */
while ((ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_TNF) && nwords)
{
/* Send the data */
ssp_putreg(priv, LPC17_SSP_DR_OFFSET, (uint32_t)*ptr);
ptr++;
nwords--;
}
}
/* Then discard all card responses until the RX & TX FIFOs are emptied. */
sspdbg("discarding\n");
do
{
/* Is there anything in the RX fifo? */
sr = ssp_getreg(priv, LPC17_SSP_SR_OFFSET);
if ((sr & SSP_SR_RNE) != 0)
{
/* Yes.. Read and discard */
(void)ssp_getreg(priv, LPC17_SSP_DR_OFFSET);
}
/* There is a race condition where TFE may go true just before
* RNE goes true and this loop terminates prematurely. The nasty little
* delay in the following solves that (it could probably be tuned
* to improve performance).
*/
else if ((sr & SSP_SR_TFE) != 0)
{
up_udelay(100);
sr = ssp_getreg(priv, LPC17_SSP_SR_OFFSET);
}
}
while ((sr & SSP_SR_RNE) != 0 || (sr & SSP_SR_TFE) == 0);
}
/****************************************************************************
* Name: ssp_recvblock
*
* Description:
* Revice a block of data from SPI
*
* Input Parameters:
* dev - Device-specific state data
* buffer - A pointer to the buffer in which to recieve data
* nwords - the length of data that can be received in the buffer in number
* of words. The wordsize is determined by the number of bits-per-word
* selected for the SPI interface. If nbits <= 8, the data is
* packed into uint8_t's; if nbits >8, the data is packed into uint16_t's
*
* Returned Value:
* None
*
****************************************************************************/
static void ssp_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t nwords)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
FAR uint8_t *ptr = (FAR uint8_t*)buffer;
uint32_t rxpending = 0;
/* While there is remaining to be sent (and no synchronization error has occurred) */
sspdbg("nwords: %d\n", nwords);
while (nwords || rxpending)
{
/* Fill the transmit FIFO with 0xff...
* Write 0xff to the data register while (1) the TX FIFO is
* not full, (2) we have not exceeded the depth of the TX FIFO,
* and (3) there are more bytes to be sent.
*/
spivdbg("TX: rxpending: %d nwords: %d\n", rxpending, nwords);
while ((ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_TNF) &&
(rxpending < LPC17_SSP_FIFOSZ) && nwords)
{
ssp_putreg(priv, LPC17_SSP_DR_OFFSET, 0xff);
nwords--;
rxpending++;
}
/* Now, read the RX data from the RX FIFO while the RX FIFO is not empty */
spivdbg("RX: rxpending: %d\n", rxpending);
while (ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_RNE)
{
*ptr++ = (uint8_t)ssp_getreg(priv, LPC17_SSP_DR_OFFSET);
rxpending--;
}
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_spiinitialize
*
* Description:
* Initialize the selected SPI port
*
* Input Parameter:
* Port number (for hardware that has mutiple SPI interfaces)
*
* Returned Value:
* Valid SPI device structure reference on succcess; a NULL on failure
*
****************************************************************************/
FAR struct spi_dev_s *up_spiinitialize(int port)
{
FAR struct lpc17_sspdev_s *priv;
irqstate_t flags;
uint32_t regval;
int i;
/* Only the SSP0 and SSP1 interfaces are supported */
switch (port)
{
#ifdef CONFIG_LPC17_SSP0
case 0:
priv = &g_ssp0dev;
break;
#endif
#ifdef CONFIG_LPC17_SSP1
case 1:
priv = &g_ssp1dev;
break;
#endif
default:
return NULL;
}
/* Configure multiplexed pins as connected on the board. Chip select
* pins must be configured by board-specific logic. All SSP0 pins and
* one SSP1 pin (SCK) have multiple, alternative pin selection.
* Definitions in the board.h file must be provided to resolve the
* board-specific pin configuration like:
*
* #define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
*/
flags = irqsave();
#ifdef CONFIG_LPC17_SSP0
lpc17_configgpio(GPIO_SSP0_SCK);
lpc17_configgpio(GPIO_SSP0_MISO);
lpc17_configgpio(GPIO_SSP0_MOSI);
#endif
#ifdef CONFIG_LPC17_SSP0
lpc17_configgpio(GPIO_SSP1_SCK);
lpc17_configgpio(GPIO_SSP1_MISO);
lpc17_configgpio(GPIO_SSP1_MOSI);
#endif
/* Configure clocking */
#ifdef CONFIG_LPC17_SSP0
regval = getreg32(LPC17_SYSCON_PCLKSEL1);
regval &= ~SYSCON_PCLKSEL1_SSP0_MASK;
regval |= (SSP_PCLKSET_DIV << SYSCON_PCLKSEL1_SSP0_SHIFT);
putreg32(regval, LPC17_SYSCON_PCLKSEL1);
#endif
#ifdef CONFIG_LPC17_SSP0
regval = getreg32(LPC17_SYSCON_PCLKSEL0);
regval &= ~SYSCON_PCLKSEL0_SSP1_MASK;
regval |= (SSP_PCLKSET_DIV << SYSCON_PCLKSEL0_SSP1_SHIFT);
putreg32(regval, LPC17_SYSCON_PCLKSEL0);
#endif
/* Enable peripheral clocking to SSP0 and SSP1 */
regval = getreg32(LPC17_SYSCON_PCONP);
regval &= ~(SYSCON_PCONP_PCSSP0|SYSCON_PCONP_PCSSP1);
#ifdef CONFIG_LPC17_SSP0
regval |= SYSCON_PCONP_PCSSP0;
#else
regval |= SYSCON_PCONP_PCSSP1;
#endif
putreg32(regval, LPC17_SYSCON_PCONP);
irqrestore(flags);
/* Configure 8-bit SPI mode */
ssp_putreg(priv, LPC17_SSP_CR0_OFFSET, SSP_CR0_DSS_8BIT|SSP_CR0_FRF_SPI);
/* Disable the SSP and all interrupts (we'll poll for all data) */
ssp_putreg(priv, LPC17_SSP_CR1_OFFSET, 0);
ssp_putreg(priv, LPC17_SSP_IMSC_OFFSET, 0);
/* Set the initial SSP configuration */
#ifndef CONFIG_SPI_OWNBUS
priv->frequency = 0;
priv->nbits = 8;
priv->mode = SPIDEV_MODE0;
#endif
/* Select a default frequency of approx. 400KHz */
ssp_setfrequency((FAR struct spi_dev_s *)priv, 400000);
/* Initialize the SPI semaphore that enforces mutually exclusive access */
#ifndef CONFIG_SPI_OWNBUS
sem_init(&priv->exclsem, 0, 1);
#endif
/* Enable the SPI */
regval = ssp_getreg(priv, LPC17_SSP_CR1_OFFSET);
ssp_putreg(priv, LPC17_SSP_CR1_OFFSET, regval | SSP_CR1_SSE);
for (i = 0; i < 8; i++)
{
(void)ssp_getreg(priv, LPC17_SSP_DR_OFFSET);
}
return &priv->spidev;
}
/****************************************************************************
* Name: ssp_flush
*
* Description:
* Flush and discard any words left in the RX fifo. This can be done
* after a device is deselected if you worry about such things.
*
* Input Parameters:
* dev - Device-specific state data
*
* Returned Value:
* None
*
****************************************************************************/
void ssp_flush(FAR struct spi_dev_s *dev)
{
FAR struct lpc17_sspdev_s *priv = (FAR struct lpc17_sspdev_s *)dev;
/* Wait for the TX FIFO not full indication */
while (!(ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_TNF));
ssp_putreg(priv, LPC17_SSP_DR_OFFSET, 0xff);
/* Wait until TX FIFO and TX shift buffer are empty */
while (ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_BSY);
/* Wait until RX FIFO is not empty */
while (!(ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_RNE));
/* Then read and discard bytes until the RX FIFO is empty */
do
{
(void)ssp_getreg(priv, LPC17_SSP_DR_OFFSET);
}
while (ssp_getreg(priv, LPC17_SSP_SR_OFFSET) & SSP_SR_RNE);
}
#endif /* CONFIG_LPC17_SSP0/1 */

3
arch/arm/src/lpc17xx/lpc17_ssp.h
View File

@ -48,6 +48,9 @@
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* 8 frame FIFOs for both transmit and receive */
#define LPC17_SSP_FIFOSZ 8
/* Register offsets *****************************************************************/

18
configs/nucleus2g/include/board.h
View File

@ -140,6 +140,7 @@
#define LED_PANIC 7 /* RED RED NC (1Hz flashing) */
/* Alternate pin selections *********************************************************/
/* UART1 -- Not connected */
#define GPIO_UART1_TXD GPIO_UART1_TXD_1
#define GPIO_UART1_RXD GPIO_UART1_RXD_1
@ -150,12 +151,29 @@
#define GPIO_UART1_RI GPIO_UART1_RI_1
#define GPIO_UART1_RTS GPIO_UART1_RTS_1
/* UART2 -- Not connected */
#define GPIO_UART2_TXD GPIO_UART2_TXD_1
#define GPIO_UART2_RXD GPIO_UART2_RXD_1
/* UART3 -- Not connected */
#define GPIO_UART3_TXD GPIO_UART3_TXD_1
#define GPIO_UART3_RXD GPIO_UART3_RXD_1
/* Either SPI or SSP0 can drive the MMC/SD slot (SSP0 alternate pin settings are
* not connected)
*/
#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1
#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1
#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1
/* SSP1 */
#define GPIO_SSP1_SCK GPIO_SSP1_SCK_1
/************************************************************************************
* Public Data
************************************************************************************/