configs/eagle100/nxflat: Configuration converted to use the kconfig-frontends tools
This commit is contained in:
Gregory Nutt
parent
884182db9e
commit
9282d8add0
@ -21,29 +21,30 @@ Development Environment
|
||||
GNU Toolchain Options
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The NuttX make system has been modified to support the following different
|
||||
toolchain options.
|
||||
The NuttX make system has been modified to support the multiple toolchain
|
||||
options including:
|
||||
|
||||
1. The CodeSourcery GNU toolchain,
|
||||
2. The devkitARM GNU toolchain, or
|
||||
2. The devkitARM GNU toolchain,
|
||||
3. The NuttX buildroot Toolchain (see below).
|
||||
|
||||
All testing has been conducted using the NuttX buildroot toolchain. However,
|
||||
the make system is setup to default to use the devkitARM toolchain. To use
|
||||
the CodeSourcery or devkitARM GNU toolchain, you simply need to build the
|
||||
system as follows:
|
||||
the CodeSourcery or devkitARM, you simply need to add one of the following
|
||||
configuration options to your .config (or defconfig) file:
|
||||
|
||||
make # Will build for the devkitARM toolchain
|
||||
make CROSSDEV=arm-eabi- # Will build for the devkitARM toolchain
|
||||
make CROSSDEV=arm-none-eabi- # Will build for the CodeSourcery toolchain
|
||||
make CROSSDEV=arm-nuttx-elf- # Will build for the NuttX buildroot toolchain
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
|
||||
Of course, hard coding this CROSS_COMPILE value in Make.defs file will save
|
||||
some repetitive typing.
|
||||
If you are not using CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT, then you may also have to modify
|
||||
the PATH in the setenv.h file if your make cannot find the tools.
|
||||
|
||||
NOTE: the CodeSourcery and devkitARM toolchains are Windows native toolchains.
|
||||
The NuttX buildroot toolchain is a Cygwin toolchain. There are several limitations
|
||||
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
|
||||
NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains.
|
||||
The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or Linux
|
||||
native toolchains. There are several limitations to using a Windows based
|
||||
toolchain in a Cygwin environment. The three biggest are:
|
||||
|
||||
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
||||
performed automatically in the Cygwin makefiles using the 'cygpath' utility
|
||||
@ -58,7 +59,7 @@ GNU Toolchain Options
|
||||
directory. If you use a Windows toolchain, you should get in the habit of
|
||||
making like this:
|
||||
|
||||
make clean_context; make CROSSDEV=arm-none-eabi-
|
||||
make clean_context all
|
||||
|
||||
An alias in your .bashrc file might make that less painful.
|
||||
|
||||
@ -74,33 +75,7 @@ GNU Toolchain Options
|
||||
|
||||
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
|
||||
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
|
||||
path or will get the wrong version of make. It has been reported to me that the
|
||||
devkitARM will require an lower optimization level of -O1. Currently all of the
|
||||
Make.def files have -O2 for devkitARM -- if you are using this toolchain, you may
|
||||
need to review these settings.
|
||||
|
||||
CodeSourcery on Linux
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
If you select the CodeSourcery toolchain, the make system will assume that you
|
||||
are running a Windows version of the toolchain. If you are running under Linux,
|
||||
the make will probably fail. The fix is to edit your Make.defs file and
|
||||
use something like:
|
||||
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = n
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
MAXOPTIMIZATION = -O2
|
||||
|
||||
The values for TOPDIR is provided by the make system; the value for CONFIG_ARCH_BOARD
|
||||
is provided in your defconfig file.
|
||||
|
||||
For an example of a CodeSourcery-under-Linux Make.defs file, see
|
||||
configs/stm3210e-eval/nsh/Make.defs.
|
||||
path or will get the wrong version of make.
|
||||
|
||||
NuttX EABI "buildroot" Toolchain
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
@ -151,18 +126,10 @@ NuttX OABI "buildroot" Toolchain
|
||||
The older, OABI buildroot toolchain is also available. To use the OABI
|
||||
toolchain:
|
||||
|
||||
1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3
|
||||
configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI
|
||||
configuration such as cortexm3-defconfig-4.3.3
|
||||
|
||||
2. Modify the Make.defs file to use the OABI conventions:
|
||||
|
||||
+CROSSDEV = arm-nuttx-elf-
|
||||
+ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
|
||||
-CROSSDEV = arm-nuttx-eabi-
|
||||
-ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
-NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
When building the buildroot toolchain, either (1) modify the
|
||||
cortexm3-eabi-defconfig-4.6.3 configuration to use EABI (using
|
||||
'make menuconfig'), or (2) use an exising OABI configuration such
|
||||
as cortexm3-defconfig-4.3.3
|
||||
|
||||
NXFLAT Toolchain
|
||||
^^^^^^^^^^^^^^^^
|
||||
@ -405,17 +372,7 @@ Where <subdir> is one of the following:
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. As a consequence of (1), selection of toolchains differs from
|
||||
the discussion above under GNU Toolchain Options. You should
|
||||
*not* add the CROSSDEV setting on the make command line. Rather,
|
||||
you should reconfigure and select the toolchain that you want
|
||||
from the "System Type" menu.
|
||||
|
||||
Eventually, all of the eagle100 configurations will be changed
|
||||
to use the new configuration mechanism and at that time, the
|
||||
above discussion will be corrected for all configurations.
|
||||
|
||||
3. This configuration is set to use Cygwin under Windows and the
|
||||
2. This configuration is set to use Cygwin under Windows and the
|
||||
CodeSourcery toolchain. That, however, is easily reconfigurable:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
@ -437,17 +394,7 @@ Where <subdir> is one of the following:
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. As a consequence of (1), selection of toolchains differs from
|
||||
the discussion above under GNU Toolchain Options. You should
|
||||
*not* add the CROSSDEV setting on the make command line. Rather,
|
||||
you should reconfigure and select the toolchain that you want
|
||||
from the "System Type" menu.
|
||||
|
||||
Eventually, all of the eagle100 configurations will be changed
|
||||
to use the new configuration mechanism and at that time, the
|
||||
above discussion will be corrected for all configurations.
|
||||
|
||||
3. This configuration is set to use Cygwin under Windows and the
|
||||
2. This configuration is set to use Cygwin under Windows and the
|
||||
CodeSourcery toolchain. That, however, is easily reconfigurable:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
@ -474,17 +421,7 @@ Where <subdir> is one of the following:
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. As a consequence of (1), selection of toolchains differs from
|
||||
the discussion above under GNU Toolchain Options. You should
|
||||
*not* add the CROSSDEV setting on the make command line. Rather,
|
||||
you should reconfigure and select the toolchain that you want
|
||||
from the "System Type" menu.
|
||||
|
||||
Eventually, all of the eagle100 configurations will be changed
|
||||
to use the new configuration mechanism and at that time, the
|
||||
above discussion will be corrected for all configurations.
|
||||
|
||||
3. This configuration is set to use Cygwin under Windows and the
|
||||
4. This configuration is set to use Cygwin under Windows and the
|
||||
devkitARM toolchain. That, however, is easily reconfigurable:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
@ -494,9 +431,26 @@ Where <subdir> is one of the following:
|
||||
nxflat:
|
||||
This builds the NXFLAT example at apps/examples/nxfalt.
|
||||
|
||||
NOTE: See note above with regard to the EABI/OABI buildroot
|
||||
toolchains. This example can only be built using the older
|
||||
OABI toolchain.
|
||||
NOTES:
|
||||
|
||||
1. This configuration uses the mconf-based configuration tool. To
|
||||
change this configurations using that tool, you should:
|
||||
|
||||
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||||
and misc/tools/
|
||||
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. This example can only be built using the NuttX buildroot
|
||||
toolchain with the NXFLAT tools.
|
||||
|
||||
3. This configuration is set to use Cygwin under Windows and the
|
||||
devkitARM toolchain. That, however, is easily reconfigurable:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
CONFIG_ARM7M_TOOLCHAIN_DEVKITARM=y
|
||||
|
||||
thttpd:
|
||||
This builds the THTTPD web server example using the THTTPD and
|
||||
@ -513,17 +467,7 @@ Where <subdir> is one of the following:
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. As a consequence of (1), selection of toolchains differs from
|
||||
the discussion above under GNU Toolchain Options. You should
|
||||
*not* add the CROSSDEV setting on the make command line. Rather,
|
||||
you should reconfigure and select the toolchain that you want
|
||||
from the "System Type" menu.
|
||||
|
||||
Eventually, all of the eagle100 configurations will be changed
|
||||
to use the new configuration mechanism and at that time, the
|
||||
above discussion will be corrected for all configurations.
|
||||
|
||||
3. This configuration is set to use Linux and the buildroot toolchain.
|
||||
2. This configuration is set to use Linux and the buildroot toolchain.
|
||||
That, however, is easily reconfigurable:
|
||||
|
||||
CONFIG_HOST_LINUX=y
|
||||
|
||||
@ -95,7 +95,7 @@ OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
ifneq ($(CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT),y)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
|
||||
@ -95,14 +95,13 @@ OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
ifneq ($(CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT),y)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
|
||||
@ -95,7 +95,7 @@ OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
ifneq ($(CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT),y)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
|
||||
@ -35,14 +35,24 @@
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
# The default value for CROSSDEV can be overridden from the make command line:
|
||||
# make -- Will build for the devkitARM toolchain
|
||||
# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain
|
||||
# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain
|
||||
# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX OABI buildroot toolchain
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
endif
|
||||
|
||||
CROSSDEV = arm-eabi-
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
@ -52,31 +62,9 @@ NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
MKNXFLAT = mknxflat
|
||||
LDNXFLAT = ldnxflat
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
MAXOPTIMIZATION = -Os
|
||||
else
|
||||
WINTOOL = y
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
@ -92,35 +80,29 @@ ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \
|
||||
$(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) \
|
||||
-T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoffset.ld \
|
||||
-no-check-sections
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
ifneq ($(CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT),y)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
|
||||
@ -1,39 +0,0 @@
|
||||
############################################################################
|
||||
# configs/eagle100/nxflat/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/nxflat
|
||||
|
||||
@ -1,201 +1,274 @@
|
||||
############################################################################
|
||||
# configs/eagle100/nxflat/defconfig
|
||||
#
|
||||
# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
#
|
||||
# Architecture Selection
|
||||
#
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_ARM=y
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
CONFIG_ARCH_CHIP="lm"
|
||||
CONFIG_ARCH_CHIP_LM=y
|
||||
CONFIG_ARCH_CHIP_LM3S=y
|
||||
CONFIG_ARCH_CHIP_LM3S6918=y
|
||||
CONFIG_ARCH_BOARD="eagle100"
|
||||
CONFIG_ARCH_BOARD_EAGLE100=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=4531
|
||||
CONFIG_RAM_SIZE=65536
|
||||
CONFIG_RAM_START=0x20000000
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_CALIBRATION=n
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Disable support for interrupts on GPIOJ which does not
|
||||
# exist on the LM3S6918. Additional interrupt support can be
|
||||
# disabled if desired to reduce memory footprint.
|
||||
CONFIG_LM_DISABLE_GPIOA_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOB_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOC_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOD_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOE_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOF_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOG_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOH_IRQS=n
|
||||
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_DEFAULT_SMALL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# LM3S6918 specific serial device driver settings
|
||||
# Build Configuration
|
||||
#
|
||||
CONFIG_LM_UART0=y
|
||||
CONFIG_LM_UART1=n
|
||||
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||
CONFIG_UART1_SERIAL_CONSOLE=n
|
||||
CONFIG_UART0_TXBUFSIZE=256
|
||||
CONFIG_UART1_TXBUFSIZE=256
|
||||
CONFIG_UART0_RXBUFSIZE=256
|
||||
CONFIG_UART1_RXBUFSIZE=256
|
||||
CONFIG_UART0_BAUD=115200
|
||||
CONFIG_UART1_BAUD=115200
|
||||
CONFIG_UART0_BITS=8
|
||||
CONFIG_UART1_BITS=8
|
||||
CONFIG_UART0_PARITY=0
|
||||
CONFIG_UART1_PARITY=0
|
||||
CONFIG_UART0_2STOP=0
|
||||
CONFIG_UART1_2STOP=0
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# LM3S6918 specific SSI device driver settings
|
||||
# Binary Output Formats
|
||||
#
|
||||
CONFIG_SSI0_DISABLE=n
|
||||
CONFIG_SSI1_DISABLE=y
|
||||
CONFIG_SSI_POLLWAIT=y
|
||||
#CONFIG_SSI_TXLIMIT=4
|
||||
|
||||
#
|
||||
# LM3S6918 specific serial device driver settings
|
||||
#
|
||||
CONFIG_LM_ETHERNET=n
|
||||
CONFIG_LM_ETHLEDS=n
|
||||
CONFIG_LM_BOARDMAC=y
|
||||
CONFIG_LM_ETHHDUPLEX=n
|
||||
CONFIG_LM_ETHNOAUTOCRC=n
|
||||
CONFIG_LM_ETHNOPAD=n
|
||||
CONFIG_LM_MULTICAST=n
|
||||
CONFIG_LM_PROMISCUOUS=n
|
||||
CONFIG_LM_BADCRC=n
|
||||
CONFIG_LM_DUMPPACKET=n
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=n
|
||||
CONFIG_MOTOROLA_SREC=n
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# General OS setup
|
||||
# Customize Header Files
|
||||
#
|
||||
CONFIG_USER_ENTRYPOINT="nxflat_main"
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_DEBUG_BINFMT=y
|
||||
CONFIG_MM_REGIONS=1
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
CONFIG_ARCH_HAVE_STACKCHECK=y
|
||||
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
CONFIG_ARCH_HAVE_CUSTOMOPT=y
|
||||
# CONFIG_DEBUG_NOOPT is not set
|
||||
# CONFIG_DEBUG_CUSTOMOPT is not set
|
||||
CONFIG_DEBUG_FULLOPT=y
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_A1X is not set
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
CONFIG_ARCH_CHIP_LM=y
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAMA5 is not set
|
||||
# CONFIG_ARCH_CHIP_SAMD is not set
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
# CONFIG_ARCH_ARM7TDMI is not set
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
# CONFIG_ARCH_CORTEXM4 is not set
|
||||
# CONFIG_ARCH_CORTEXA5 is not set
|
||||
# CONFIG_ARCH_CORTEXA8 is not set
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="lm"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
# CONFIG_ARCH_HAVE_FPU is not set
|
||||
# CONFIG_ARCH_HAVE_MPU is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
|
||||
|
||||
#
|
||||
# Stellaris Configuration Options
|
||||
#
|
||||
CONFIG_ARCH_CHIP_LM3S6918=y
|
||||
# CONFIG_ARCH_CHIP_LM3S9B96 is not set
|
||||
# CONFIG_ARCH_CHIP_LM3S6432 is not set
|
||||
# CONFIG_ARCH_CHIP_LM3S6965 is not set
|
||||
# CONFIG_ARCH_CHIP_LM3S8962 is not set
|
||||
# CONFIG_ARCH_CHIP_LM4F120 is not set
|
||||
CONFIG_ARCH_CHIP_LM3S=y
|
||||
CONFIG_LM_HAVE_SSI1=y
|
||||
# CONFIG_LM_REVA2 is not set
|
||||
|
||||
#
|
||||
# Stellaris Peripheral Support
|
||||
#
|
||||
CONFIG_LM_UART0=y
|
||||
# CONFIG_LM_UART1 is not set
|
||||
# CONFIG_LM_UART2 is not set
|
||||
# CONFIG_SSI0_DISABLE is not set
|
||||
CONFIG_SSI1_DISABLE=y
|
||||
# CONFIG_LM_ETHERNET is not set
|
||||
# CONFIG_LM_FLASH is not set
|
||||
|
||||
#
|
||||
# Disable GPIO Interrupts
|
||||
#
|
||||
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
|
||||
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
|
||||
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
|
||||
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
|
||||
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
|
||||
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
|
||||
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
|
||||
# CONFIG_LM_DISABLE_GPIOH_IRQS is not set
|
||||
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
|
||||
|
||||
#
|
||||
# Stellaris SSI Configuration
|
||||
#
|
||||
CONFIG_SSI_POLLWAIT=y
|
||||
CONFIG_SSI_TXLIMIT=4
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_HAVE_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
# CONFIG_ARCH_HAVE_MMU is not set
|
||||
# CONFIG_ARCH_NAND_HWECC is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_IDLE_CUSTOM is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=4531
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# Interrupt options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
|
||||
# CONFIG_ARCH_HIPRI_INTERRUPT is not set
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Boot Memory Configuration
|
||||
#
|
||||
CONFIG_RAM_START=0x20000000
|
||||
CONFIG_RAM_SIZE=65536
|
||||
# CONFIG_ARCH_HAVE_SDRAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_EAGLE100=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="eagle100"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
# CONFIG_SYSTEM_TIME64 is not set
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
# CONFIG_SCHED_CPULOAD is not set
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2009
|
||||
CONFIG_START_MONTH=5
|
||||
CONFIG_START_DAY=6
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
CONFIG_MUTEX_TYPES=n
|
||||
CONFIG_PRIORITY_INHERITANCE=n
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=0
|
||||
CONFIG_FDCLONE_DISABLE=n
|
||||
CONFIG_FDCLONE_STDIO=n
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
|
||||
#
|
||||
# Settings for examples/nxflat
|
||||
#
|
||||
CONFIG_NXFLAT=y
|
||||
CONFIG_NXFLAT_DUMPBUFFER=n
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
# APIs supported by the OS. If the compiler supports
|
||||
# weak functions, then it should not be necessary to
|
||||
# disable functions unless you want to restrict usage
|
||||
# of those APIs.
|
||||
#
|
||||
# There are certain dependency relationships in these
|
||||
# features.
|
||||
#
|
||||
# o mq_notify logic depends on signals to awaken tasks
|
||||
# waiting for queues to become full or empty.
|
||||
# o pthread_condtimedwait() depends on signals to wake
|
||||
# up waiting tasks.
|
||||
#
|
||||
CONFIG_DISABLE_CLOCK=n
|
||||
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||
CONFIG_DISABLE_PTHREAD=n
|
||||
CONFIG_DISABLE_SIGNALS=n
|
||||
CONFIG_DISABLE_MQUEUE=n
|
||||
CONFIG_DISABLE_MOUNTPOINT=n
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nxflat_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Misc libc settings
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||
|
||||
#
|
||||
# Allow for architecture optimized implementations
|
||||
#
|
||||
# The architecture can provide optimized versions of the
|
||||
# following to improve system performance
|
||||
#
|
||||
CONFIG_ARCH_MEMCPY=n
|
||||
CONFIG_ARCH_MEMCMP=n
|
||||
CONFIG_ARCH_MEMMOVE=n
|
||||
CONFIG_ARCH_MEMSET=n
|
||||
CONFIG_ARCH_STRCMP=n
|
||||
CONFIG_ARCH_STRCPY=n
|
||||
CONFIG_ARCH_STRNCPY=n
|
||||
CONFIG_ARCH_STRLEN=n
|
||||
CONFIG_ARCH_STRNLEN=n
|
||||
CONFIG_ARCH_BZERO=n
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
@ -206,130 +279,392 @@ CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Filesystem configuration
|
||||
#
|
||||
CONFIG_FS_FAT=n
|
||||
CONFIG_FS_ROMFS=y
|
||||
|
||||
#
|
||||
# Maintain legacy build behavior (revisit)
|
||||
#
|
||||
|
||||
CONFIG_MMCSD=y
|
||||
CONFIG_MMCSD_SPI=y
|
||||
CONFIG_MTD=y
|
||||
|
||||
#
|
||||
# SPI-based MMC/SD driver
|
||||
#
|
||||
CONFIG_MMCSD_NSLOTS=1
|
||||
CONFIG_MMCSD_READONLY=n
|
||||
CONFIG_MMCSD_SPICLOCK=12500000
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
#
|
||||
CONFIG_NET=n
|
||||
CONFIG_NET_IPv6=n
|
||||
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=420
|
||||
CONFIG_NET_TCP=n
|
||||
CONFIG_NET_TCP_CONNS=40
|
||||
CONFIG_NET_MAX_LISTENPORTS=40
|
||||
CONFIG_NET_UDP=n
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
#CONFIG_NET_UDP_CONNS=10
|
||||
CONFIG_NET_ICMP=n
|
||||
CONFIG_NET_ICMP_PING=n
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
|
||||
#
|
||||
# UIP Network Utilities
|
||||
#
|
||||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# Settings for examples/uip
|
||||
#
|
||||
CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
|
||||
CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
|
||||
CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
|
||||
CONFIG_EXAMPLES_UIP_DHCPC=n
|
||||
|
||||
#
|
||||
# Settings for examples/nettest
|
||||
CONFIG_EXAMPLES_NETTEST_SERVER=n
|
||||
CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
|
||||
CONFIG_EXAMPLES_NETTEST_NOMAC=n
|
||||
CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
|
||||
CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
|
||||
CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
|
||||
CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
|
||||
|
||||
#
|
||||
# Settings for examples/ostest
|
||||
#
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
|
||||
#
|
||||
# Settings for apps/nshlib
|
||||
#
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_STRERROR=n
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
CONFIG_NSH_DISABLESCRIPT=n
|
||||
CONFIG_NSH_DISABLEBG=n
|
||||
CONFIG_NSH_ROMFSETC=n
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
CONFIG_NSH_TELNET=n
|
||||
CONFIG_NSH_ARCHINIT=n
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_NSH_DHCPC=n
|
||||
CONFIG_NSH_NOMAC=n
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_NSH_ROMFSDEVNO=0
|
||||
CONFIG_NSH_ROMFSSECTSIZE=64
|
||||
CONFIG_NSH_FATDEVNO=1
|
||||
CONFIG_NSH_FATSECTSIZE=512
|
||||
CONFIG_NSH_FATNSECTORS=1024
|
||||
CONFIG_NSH_FATMOUNTPT="/tmp"
|
||||
|
||||
#
|
||||
# Architecture-specific NSH options
|
||||
#
|
||||
CONFIG_NSH_MMCSDSPIPORTNO=0
|
||||
CONFIG_NSH_MMCSDSLOTNO=0
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_BOOT_RUNFROMFLASH=n
|
||||
CONFIG_BOOT_COPYTORAM=n
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_ARCH_HAVE_I2CRESET is not set
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_I2S is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_VIDEO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_UART0=y
|
||||
|
||||
#
|
||||
# USART Configuration
|
||||
#
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# UART0 Configuration
|
||||
#
|
||||
CONFIG_UART0_RXBUFSIZE=256
|
||||
CONFIG_UART0_TXBUFSIZE=256
|
||||
CONFIG_UART0_BAUD=115200
|
||||
CONFIG_UART0_BITS=8
|
||||
CONFIG_UART0_PARITY=0
|
||||
CONFIG_UART0_2STOP=0
|
||||
# CONFIG_UART0_IFLOWCONTROL is not set
|
||||
# CONFIG_UART0_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_ARCH_HAVE_NET is not set
|
||||
# CONFIG_ARCH_HAVE_PHY is not set
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
|
||||
CONFIG_FS_READABLE=y
|
||||
# CONFIG_FS_WRITABLE is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
# CONFIG_FS_FAT is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
CONFIG_FS_ROMFS=y
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_PROCFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=1
|
||||
# CONFIG_ARCH_HAVE_HEAP2 is not set
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
CONFIG_NXFLAT=y
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
CONFIG_PIC=y
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
CONFIG_EXAMPLES_NXFLAT=y
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# Platform-specific Support
|
||||
#
|
||||
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||
|
||||
#
|
||||
# System Libraries and NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# USB CDC/ACM Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# USB Composite Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# INI File Parser
|
||||
#
|
||||
# CONFIG_SYSTEM_INIFILE is not set
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# NxPlayer media player library / command Line
|
||||
#
|
||||
# CONFIG_SYSTEM_NXPLAYER is not set
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# EMACS-like Command Line Editor
|
||||
#
|
||||
# CONFIG_SYSTEM_CLE is not set
|
||||
|
||||
#
|
||||
# VI Work-Alike Editor
|
||||
#
|
||||
# CONFIG_SYSTEM_VI is not set
|
||||
|
||||
#
|
||||
# Stack Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# USB Mass Storage Device Commands
|
||||
#
|
||||
|
||||
#
|
||||
# Zmodem Commands
|
||||
#
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
|
||||
@ -47,10 +47,24 @@ if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
|
||||
@ -95,7 +95,7 @@ OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
ifneq ($(CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT),y)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
|
||||
@ -114,8 +114,8 @@ Development Environment
|
||||
GNU Toolchain Options
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The NuttX make system has been modified to support the following different
|
||||
toolchain options.
|
||||
The NuttX make system has been modified to support the multiple toolchain
|
||||
options including:
|
||||
|
||||
1. The CodeSourcery GNU toolchain,
|
||||
2. The devkitARM GNU toolchain,
|
||||
@ -126,12 +126,12 @@ GNU Toolchain Options
|
||||
the CodeSourcery or devkitARM, you simply need to add one of the following
|
||||
configuration options to your .config (or defconfig) file:
|
||||
|
||||
CONFIG_LM_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_LM_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_LM_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_LM_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
|
||||
If you are not using CONFIG_LM_BUILDROOT, then you may also have to modify
|
||||
If you are not using CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT, then you may also have to modify
|
||||
the PATH in the setenv.h file if your make cannot find the tools.
|
||||
|
||||
NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains.
|
||||
|
||||
Loading…
Reference in New Issue
Block a user