Add a stub that can be used when networking is enabled, but there is no ethernet driver

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3368 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2011-03-11 23:35:36 +00:00
parent f69bf78abb
commit 93cf78af8b
5 changed files with 106 additions and 30 deletions

View File

@ -0,0 +1,86 @@
/****************************************************************************
* arch/arm/src/common/up_etherstub.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include "up_internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_netinitialize (stub)
*
* Description:
* This is a stub version os up_netinitialize. Normally, up_netinitialize
* is defined in board/up_network.c for board-specific ethernet
* implementations, or chip/xyx_ethernet.c for chip-specific ethernet
* implementations. The stub version here is used in the cornercase where
* the network is enable yet there is no ethernet driver to be initialized.
* In this case, up_initialize will still try to call up_netinitialize()
* when one does not exist. This cornercase would occur if, for example,
* only a USB network interface is being used or perhaps if a SLIP is
* being used).
*
* In the long run, it might be better to have some kind of CONFIG_NO_ETHERNET
* to suppress the call to up_netinitialize() in up_initialize(). Then
* this stub would not be needed.
*
****************************************************************************/
void up_netinitialize(void)
{
}

View File

@ -1,7 +1,7 @@
/****************************************************************************
* common/up_internal.h
*
* Copyright (C) 2007-2010 Gregory Nutt. All rights reserved.
* Copyright (C) 2007-2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -259,7 +259,11 @@ extern void up_ledoff(int led);
# define up_ledoff(led)
#endif
/* Defined in board/up_network.c */
/* Defined in board/up_network.c for board-specific ethernet implementations,
* or chip/xyx_ethernet.c for chip-specific ethernet implementations, or
* common/up_etherstub.c for a cornercase where the network is enable yet
* there is no ethernet driver to be initialized.
*/
#ifdef CONFIG_NET
extern void up_netinitialize(void);

View File

@ -48,6 +48,12 @@ CMN_CSRCS = up_assert.c up_blocktask.c up_copystate.c up_createstack.c \
up_sigdeliver.c up_unblocktask.c up_usestack.c up_doirq.c \
up_hardfault.c up_svcall.c
ifeq ($(CONFIG_NET),y)
ifneq ($(CONFIG_LPC17_ETHERNET),y)
CMN_CSRCS += up_etherstub.c
endif
endif
# Required LPC17xx files
CHIP_ASRCS =
@ -77,6 +83,8 @@ ifeq ($(CONFIG_LPC17_GPDMA),y)
CHIP_CSRCS += lpc17_gpdma.c
endif
ifdef CONFIG_NET
ifeq ($(CONFIG_NET),y)
ifeq ($(CONFIG_LPC17_ETHERNET),y)
CHIP_CSRCS += lpc17_ethernet.c
endif
endif

View File

@ -1770,25 +1770,3 @@ int usbhost_wlaninit(void)
return usbhost_registerclass(&g_wlan);
}
#if defined(CONFIG_NET) && defined(CONFIG_NET_WLAN)
/****************************************************************************
* Name: up_netinitialize
*
* Description:
* Initialize the first network interface. If there are more than one
* interface in the chip, then board-specific logic will have to provide
* this function to determine which, if any, Ethernet controllers should
* be initialized.
*
****************************************************************************/
#ifndef CONFIG_LPC17_ETHERNET
void up_netinitialize(void)
{
/* stub */
}
#endif
#endif /* CONFIG_NET && CONFIG_NET_WLAN */

View File

@ -494,16 +494,16 @@ static int nsh_execute(FAR struct nsh_vtbl_s *vtbl, int argc, char *argv[])
/* If the command was not found, then try to execute the command from
* a list of pre-built applications.
*/
*/
#ifdef CONFIG_EXAMPLES_NSH_BUILTIN_APPS
if (handler == cmd_unrecognized && nsh_execapp(vtbl, cmd, argv) == OK)
{
/* The pre-built application was successfully started -- run OK.
* If not, then fall through to execute the cmd_nrecognized handler.
*/
/* The pre-built application was successfully started -- return OK.
* If not, then fall through to execute the cmd_nrecognized handler.
*/
return OK;
return OK;
}
#endif