Add option for ARM interrupt stack
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@981 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
f0b8289e37
commit
976be5deaa
@ -124,8 +124,8 @@ defconfig -- This is a configuration file similar to the Linux
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
Some architectures require a description of the RAM configuration:
|
||||
|
||||
|
||||
@ -1,6 +1,78 @@
|
||||
README
|
||||
^^^^^^
|
||||
|
||||
ARM/C5471-specific Configuration Options
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||
be set to:
|
||||
|
||||
CONFIG_ARCH=arm
|
||||
|
||||
CONFIG_ARCH_name - For use in C code:
|
||||
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
|
||||
CONFIG_ARCH_CHIP=c5471
|
||||
|
||||
CONFIG_ARCH_CHIP_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_CHIP_C5471
|
||||
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
|
||||
CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM)
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM)
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
CONFIG_ROM_VECTORS - should be defined for the C5471 because the
|
||||
interrupt vectors are in ROM
|
||||
|
||||
CONFIG_DRAM_END - the size of installed DRAM. Unique to c5471
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||
have LEDs
|
||||
|
||||
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
stack. If defined, this symbol is the size of the interrupt
|
||||
stack in bytes. If not defined, the user task stacks will be
|
||||
used during interrupt handling.
|
||||
|
||||
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
|
||||
C5471 specific device driver settings
|
||||
|
||||
CONFIG_SERIAL_IRDA_CONSOLE - selects the IRDA UART for the
|
||||
console ant ttys0 (default is the modem UART).
|
||||
CONFIG_UART_*_HWFLOWCONTROL - enables hardware flow control
|
||||
CONFIG_UART_*_RXBUFSIZE - Characters are buffered as received.
|
||||
This specific the size of the receive buffer
|
||||
CONFIG_UART_*_TXBUFSIZE - Characters are buffered before
|
||||
being sent. This specific the size of the transmit buffer
|
||||
CONFIG_UART_*_BAUD - The configure BAUD of the UART. Must be
|
||||
CONFIG_UART_*_BITS - The number of bits. Must be either 7 or 8.
|
||||
CONFIG_UART_*_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
CONFIG_UART_*_2STOP - Two stop bits
|
||||
|
||||
C5471 Ethernet Driver settings
|
||||
|
||||
CONFIG_C5471_NET_STATS
|
||||
CONFIG_C5471_ETHERNET_PHY={ETHERNET_PHY_LU3X31T_T64,ETHERNET_PHY_AC101L}
|
||||
CONFIG_NET_C5471_AUTONEGOTIATION
|
||||
CONFIG_NET_C5471_BASET100
|
||||
CONFIG_NET_C5471_BASET10
|
||||
|
||||
defconfig
|
||||
^^^^^^^^^
|
||||
The default configuration file, defconfig, performs a
|
||||
|
||||
@ -51,6 +51,10 @@
|
||||
# CONFIG_DRAM_END - the size of installed DRAM.
|
||||
# Unique to c5471
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471.
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250
|
||||
CONFIG_ROM_VECTORS=n
|
||||
CONFIG_DRAM_END=0x11000000
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
|
||||
@ -51,6 +51,10 @@
|
||||
# CONFIG_DRAM_END - the size of installed DRAM.
|
||||
# Unique to c5471
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471.
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250
|
||||
CONFIG_ROM_VECTORS=n
|
||||
CONFIG_DRAM_END=0x11000000
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
|
||||
@ -51,6 +51,10 @@
|
||||
# CONFIG_DRAM_END - the size of installed DRAM.
|
||||
# Unique to c5471
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471.
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250
|
||||
CONFIG_ROM_VECTORS=n
|
||||
CONFIG_DRAM_END=0x11000000
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
|
||||
@ -51,6 +51,10 @@
|
||||
# CONFIG_DRAM_END - the size of installed DRAM.
|
||||
# Unique to c5471
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to c5471.
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_BOARD_LOOPSPERMSEC=1250
|
||||
CONFIG_ROM_VECTORS=n
|
||||
CONFIG_DRAM_END=0x11000000
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
|
||||
@ -15,6 +15,102 @@ For example, the path to the built lpc21isp binary will most likely
|
||||
have to have change. Then move this script to the top level NuttX
|
||||
directory and simply execute it to load NuttX onto the board.
|
||||
|
||||
ARM/LPC214X-specific Configuration Options
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||
be set to:
|
||||
|
||||
CONFIG_ARCH=arm
|
||||
|
||||
CONFIG_ARCH_name - For use in C code:
|
||||
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
|
||||
CONFIG_ARCH_CHIP=c5471
|
||||
|
||||
CONFIG_ARCH_CHIP_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_CHIP_C5471
|
||||
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
|
||||
CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM)
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM)
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
|
||||
CONFIG_DRAM_START - The start address of installed DRAM
|
||||
|
||||
CONFIG_DRAM_END - Should be (CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||
have LEDs
|
||||
|
||||
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
stack. If defined, this symbol is the size of the interrupt
|
||||
stack in bytes. If not defined, the user task stacks will be
|
||||
used during interrupt handling.
|
||||
|
||||
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
|
||||
LPC2148 specific chip initialization
|
||||
|
||||
CONFIG_EXTMEM_MODE, CONFIG_RAM_MODE, CONFIG_CODE_BASE, CONFIG_PLL_SETUP,
|
||||
CONFIG_MAM_SETUP, CONFIG_APBDIV_SETUP, CONFIG_EMC_SETUP, CONFIG_BCFG0_SETUP,
|
||||
CONFIG_BCFG1_SETUP, CONFIG_BCFG2_SETUP, CONFIG_BCFG3_SETUP, CONFIG_ADC_SETUP
|
||||
|
||||
LPC214X specific device driver settings
|
||||
|
||||
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
console and ttys0 (default is the UART0).
|
||||
|
||||
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
This specific the size of the receive buffer
|
||||
|
||||
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||
being sent. This specific the size of the transmit buffer
|
||||
|
||||
CONFIG_UARTn_BAUD - The configure BAUD of the UART.
|
||||
|
||||
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
|
||||
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity, 3=mark 1, 4=space 0
|
||||
|
||||
CONFIG_UARTn_2STOP - Two stop bits
|
||||
|
||||
LPC214X USB Configuration
|
||||
|
||||
CONFIG_LPC214X_USBDEV_FRAME_INTERRUPT
|
||||
Handle USB Start-Of-Frame events.
|
||||
Enable reading SOF from interrupt handler vs. simply reading on demand.
|
||||
Probably a bad idea... Unless there is some issue with sampling the SOF
|
||||
from hardware asynchronously.
|
||||
|
||||
CONFIG_LPC214X_USBDEV_EPFAST_INTERRUPT
|
||||
Enable high priority interrupts. I have no idea why you might want to
|
||||
do that
|
||||
|
||||
CONFIG_LPC214X_USBDEV_NDMADESCRIPTORS
|
||||
Number of DMA descriptors to allocate in the 8Kb USB RAM. This is a
|
||||
tradeoff between the number of DMA channels that can be supported vs
|
||||
the size of the DMA buffers available.
|
||||
|
||||
CONFIG_LPC214X_USBDEV_DMA
|
||||
Enable lpc214x-specific DMA support
|
||||
|
||||
Configurations
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
|
||||
@ -50,6 +50,10 @@
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to lpc2148.
|
||||
# CONFIG_DRAM_SIZE - Describes the internal DRAM.
|
||||
# CONFIG_DRAM_START - The start address of internal DRAM
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -62,6 +66,7 @@ CONFIG_ARCH_LEDS=y
|
||||
CONFIG_DRAM_SIZE=0x00008000
|
||||
CONFIG_DRAM_START=0x40000000
|
||||
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
|
||||
@ -50,6 +50,10 @@
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to lpc2148.
|
||||
# CONFIG_DRAM_SIZE - Describes the internal DRAM.
|
||||
# CONFIG_DRAM_START - The start address of internal DRAM
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -62,6 +66,7 @@ CONFIG_ARCH_LEDS=y
|
||||
CONFIG_DRAM_SIZE=0x00008000
|
||||
CONFIG_DRAM_START=0x40000000
|
||||
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
|
||||
@ -1,6 +1,83 @@
|
||||
README
|
||||
^^^^^^
|
||||
|
||||
ARM/DM320-specific Configuration Options
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||
be set to:
|
||||
|
||||
CONFIG_ARCH=arm
|
||||
|
||||
CONFIG_ARCH_name - For use in C code:
|
||||
|
||||
CONFIG_ARCH_ARM=y
|
||||
|
||||
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
|
||||
CONFIG_ARCH_CHIP=c5471
|
||||
|
||||
CONFIG_ARCH_CHIP_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_CHIP_C5471
|
||||
|
||||
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||
hence, the board that supports the particular chip or SoC.
|
||||
|
||||
CONFIG_ARCH_BOARD=c5471evm (for the Spectrum Digital C5471 EVM)
|
||||
|
||||
CONFIG_ARCH_BOARD_name - For use in C code
|
||||
|
||||
CONFIG_ARCH_BOARD_C5471EVM (for the Spectrum Digital C5471 EVM)
|
||||
|
||||
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||
of delay loops
|
||||
|
||||
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||
endian)
|
||||
|
||||
CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
|
||||
CONFIG_DRAM_START - The start address of installed DRAM
|
||||
|
||||
CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
|
||||
|
||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||
have LEDs
|
||||
|
||||
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
stack. If defined, this symbol is the size of the interrupt
|
||||
stack in bytes. If not defined, the user task stacks will be
|
||||
used during interrupt handling.
|
||||
|
||||
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
|
||||
DM320 specific device driver settings
|
||||
|
||||
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
console and ttys0 (default is the UART0).
|
||||
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
This specific the size of the receive buffer
|
||||
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||
being sent. This specific the size of the transmit buffer
|
||||
CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
CONFIG_UARTn_2STOP - Two stop bits
|
||||
|
||||
DM320 USB Configuration
|
||||
|
||||
CONFIG_DM320_GIO_USBATTACH
|
||||
GIO that detects USB attach/detach events
|
||||
CONFIG_DM320_GIO_USBDPPULLUP
|
||||
GIO
|
||||
CONFIG_DMA320_USBDEV_DMA
|
||||
Enable DM320-specific DMA support
|
||||
CONFIG_DM320_GIO_USBATTACH=6
|
||||
|
||||
Configurations
|
||||
^^^^^^^^^^^^^^
|
||||
|
||||
Each Neuros OSD configuration is maintained in a sudirectory and
|
||||
can be selected as follow:
|
||||
|
||||
|
||||
@ -50,6 +50,10 @@
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||
# CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000
|
||||
CONFIG_DRAM_START=0x01000000
|
||||
CONFIG_DRAM_VSTART=0x00000000
|
||||
CONFIG_DRAM_NUTTXENTRY=0x01008000
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=n
|
||||
|
||||
#
|
||||
|
||||
@ -50,6 +50,10 @@
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||
# CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000
|
||||
CONFIG_DRAM_START=0x01000000
|
||||
CONFIG_DRAM_VSTART=0x00000000
|
||||
CONFIG_DRAM_NUTTXENTRY=0x01008000
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=n
|
||||
|
||||
#
|
||||
|
||||
@ -50,6 +50,10 @@
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||
# CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000
|
||||
CONFIG_DRAM_START=0x01000000
|
||||
CONFIG_DRAM_VSTART=0x00000000
|
||||
CONFIG_DRAM_NUTTXENTRY=0x01008000
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
|
||||
#
|
||||
|
||||
@ -50,6 +50,10 @@
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||
# CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000
|
||||
CONFIG_DRAM_START=0x01000000
|
||||
CONFIG_DRAM_VSTART=0x00000000
|
||||
CONFIG_DRAM_NUTTXENTRY=0x01008000
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=n
|
||||
|
||||
#
|
||||
|
||||
@ -50,6 +50,10 @@
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||
# CONFIG_DRAM_VSTART - The startaddress of DRAM (virtual)
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
@ -63,6 +67,7 @@ CONFIG_DRAM_SIZE=0x01000000
|
||||
CONFIG_DRAM_START=0x01000000
|
||||
CONFIG_DRAM_VSTART=0x00000000
|
||||
CONFIG_DRAM_NUTTXENTRY=0x01008000
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=n
|
||||
|
||||
#
|
||||
|
||||
Loading…
Reference in New Issue
Block a user