SAMV71-XULT: Add another NSH configuration for text kernel modules

configs/samv71-xult/README.txt

@@ -1743,9 +1743,10 @@ Configuration sub-directories
        If you do this a lot, you will probably want to invest a little time
        to develop a tool to automate these steps.
 
-  mxtxplnd:
+  module:
 
-    Configures the NuttShell (nsh) located at examples/nsh.  There are four
+    A simple stripped down configuration that was used for testing NuttX
+    OS modules.  There are five
     very similar NSH configurations:
 
       - knsh.  This is a somewhat simplified version of the nsh configuration
@@ -1754,6 +1755,25 @@ Configuration sub-directories
         driver testing.  It has no network.
       - netnsh.  This configuration is focused on network testing and
         has only limited command support.
+      - module.  A simple stripped down configuration that was used for testing
+        NuttXOS modules.
+      - mxtxplnd.  This configuration is identical to the nsh configuration
+        but assumes that you have a maXTouch Xplained Pro LCD attached
+        and includes extra tests for the touchscreen and LCD.
+
+  mxtxplnd:
+
+    Configures the NuttShell (nsh) located at examples/nsh.  There are five
+    very similar NSH configurations:
+
+      - knsh.  This is a somewhat simplified version of the nsh configuration
+        that builds using the protected build mode (CONFIG_BUILD_PROTECTED=y).
+      - nsh.  This configuration is focused on low level, command-line
+        driver testing.  It has no network.
+      - netnsh.  This configuration is focused on network testing and
+        has only limited command support.
+      - module.  A simple stripped down configuration that was used for testing
+        NuttXOS modules.
       - mxtxplnd.  This configuration is identical to the nsh configuration
         but assumes that you have a maXTouch Xplained Pro LCD attached
         and includes extra tests for the touchscreen and LCD.
@@ -1852,7 +1872,7 @@ Configuration sub-directories
 
   netnsh:
 
-    Configures the NuttShell (nsh) located at examples/nsh.  There are four
+    Configures the NuttShell (nsh) located at examples/nsh.  There are five
     very similar NSH configurations:
 
       - knsh.  This is a somewhat simplified version of the nsh configuration
@@ -1861,6 +1881,8 @@ Configuration sub-directories
         driver testing.  It has no network.
       - netnsh.  This configuration is focused on network testing and
         has only limited command support.
+      - module.  A simple stripped down configuration that was used for testing
+        NuttXOS modules.
       - mxtxplnd.  This configuration is identical to the nsh configuration
         but assumes that you have a maXTouch Xplained Pro LCD attached
         and includes extra tests for the touchscreen and LCD.
@@ -1965,7 +1987,7 @@ Configuration sub-directories
 
   nsh:
 
-    Configures the NuttShell (nsh) located at examples/nsh.  There are four
+    Configures the NuttShell (nsh) located at examples/nsh.  There are five
     very similar NSH configurations:
 
       - knsh.  This is a somewhat simplified version of the nsh configuration
@@ -1974,6 +1996,8 @@ Configuration sub-directories
         driver testing.  It has no network.
       - netnsh.  This configuration is focused on network testing and
         has only limited command support.
+      - module.  A simple stripped down configuration that was used for testing
+        NuttXOS modules.
       - mxtxplnd.  This configuration is identical to the nsh configuration
         but assumes that you have a maXTouch Xplained Pro LCD attached
         and includes extra tests for the touchscreen and LCD.

configs/samv71-xult/module/Make.defs

@@ -0,0 +1,130 @@
+############################################################################
+# configs/samv71-xult/module/Make.defs
+#
+#   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+ifeq ($(CONFIG_ARMV7M_DTCM),y)
+  LDSCRIPT = flash-dtcm.ld
+else
+  LDSCRIPT = flash-sram.ld
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION)
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -fno-strict-aliasing
+ARCHWARNINGSXX = -Wall -Wshadow -Wundef
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+# NXFLAT module definitions
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+# Loadable module definitions
+
+CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
+
+LDMODULEFLAGS = -r -e module_initialize
+ifeq ($(WINTOOL),y)
+  LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/sched/module/gnu-elf.ld}"
+else
+  LDMODULEFLAGS += -T $(TOPDIR)/sched/module/gnu-elf.ld
+endif
+
+ASMEXT = .S
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
+HOSTLDFLAGS =
+

configs/samv71-xult/module/setenv.sh

@@ -0,0 +1,77 @@
+#!/bin/bash
+# configs/samv7-xult/nsh/Make.defs
+#
+#   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the Atmel GCC
+# toolchain under Windows.  You will also have to edit this if you install
+# this toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
+# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin"
+
+# This is the path to the location where I installed the devkitARM toolchain
+# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+# export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"