sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs/ubw32/nsh converted to use the kconfig-frontends tools

Browse Source
This commit is contained in:
Gregory Nutt 2014-03-01 12:12:07 -06:00
parent 317586c657
commit 98462d7c40
3 changed files with 57 additions and 236 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ChangeLog
View File

@ -6720,4 +6720,6 @@
kconfig-frontends tools (2014-3-1) kconfig-frontends tools (2014-3-1)
* configs/pic32mx7mmb/nsh: Configuration converted to use the * configs/pic32mx7mmb/nsh: Configuration converted to use the
kconfig-frontends tools (2014-3-1). kconfig-frontends tools (2014-3-1).
* configs/ubw32/nsh: Configuration converted to use the kconfig-frontends
tools (2014-3-1).

69
configs/ubw32/README.txt
View File

@ -580,48 +580,57 @@ selected as follow:
Where <subdir> is one of the following: Where <subdir> is one of the following:
nsh: nsh:
====
Description.
------------
This is the NuttShell (NSH) using the NSH startup logic at This is the NuttShell (NSH) using the NSH startup logic at
apps/examples/nsh. apps/examples/nsh.
Serial Output. NOTES:
--------------
The OS test produces all of its test output on the serial console.
This configuration has UART1 enabled as a serial console.
TX -- J4 pin 31: U1TX/RF8 1. This configuration uses the mconf-based configuration tool. To
RX -- J4 pin 30: U1RX/RF2 change this configurations using that tool, you should:
GND -- J4 pin 40: GND
Vcc -- J4 pin 39: 5V
USB Configuations. a. Build and install the kconfig-mconf tool. See nuttx/README.txt
----------------- and misc/tools/
Several USB device configurations can be enabled and included
as NSH built-in built in functions.
All USB device configurations require the following basic setup in b. Execute 'make menuconfig' in nuttx/ in order to start the
your NuttX configuration file to enable USB device support: reconfiguration process.
CONFIG_USBDEV=y : Enable basic USB device support 2. Serial Output
CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
examples/usbterm - This option can be enabled by uncommenting The OS test produces all of its test output on the serial console.
the following line in the appconfig file: This configuration has UART1 enabled as a serial console.
CONFIGURED_APPS += examples/usbterm TX -- J4 pin 31: U1TX/RF8
RX -- J4 pin 30: U1RX/RF2
GND -- J4 pin 40: GND
Vcc -- J4 pin 39: 5V
And by enabling one of the USB serial devices: 3. USB Configuations
CONFIG_PL2303=y : Enable the Prolifics PL2303 emulation Several USB device configurations can be enabled and included
CONFIG_CDCACM=y : or the CDC/ACM serial driver (not both) as NSH built-in built in functions.
system/cdcacm - The system/cdcacm program can be included as an All USB device configurations require the following basic setup in
function by uncommenting the following line in the appconfig file: your NuttX configuration file to enable USB device support:
CONFIGURED_APPS += system/cdcacm CONFIG_USBDEV=y : Enable basic USB device support
CONFIG_PIC32MX_USBDEV=y : Enable PIC32 USB device support
and defining the following in your .config file: examples/usbterm - This option can be enabled by adding the
following to the NuttX configuration file:
CONFIG_CDCACM=y : Enable the CDCACM device CONFIG_EXAMPLES_USBTERM=y
And by enabling one of the USB serial devices:
CONFIG_PL2303=y : Enable the Prolifics PL2303 emulation
CONFIG_CDCACM=y : or the CDC/ACM serial driver (not both)
system/cdcacm - The system/cdcacm program can be included as an
function by adding the following to the NuttX configuration file:
CONFIG_SYSTEM_CDCACM=y
and defining the following in your .config file:
CONFIG_CDCACM=y : Enable the CDCACM device

222
configs/ubw32/nsh/defconfig
View File

@ -31,6 +31,18 @@
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE # ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE. # POSSIBILITY OF SUCH DAMAGE.
# #
############################################################################
CONFIG_EXAMPLES_NSH=y
CONFIG_NSH_READLINE=y
# CONFIG_NSH_CLE is not set
CONFIG_SYSTEM_READLINE=y
# CONFIG_SYSTEM_CLE is not set
CONFIG_NSH_LIBRARY=y
CONFIG_HOST_WINDOWS=y
CONFIG_WINDOWS_CYGWIN=y
############################################################################ ############################################################################
# #
# Architecture Selection # Architecture Selection
@ -65,10 +77,10 @@ CONFIG_ARCH_RAMFUNCS=n
# #
# Identify toolchain and linker options # Identify toolchain and linker options
# #
CONFIG_PIC32MX_MICROCHIPW=n CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW=n
CONFIG_PIC32MX_MICROCHIPL=n CONFIG_MIPS32_TOOLCHAIN_MICROCHIPL=n
CONFIG_PIC32MX_MICROCHIPW_LITE=y CONFIG_MIPS32_TOOLCHAIN_MICROCHIPW_LITE=y
CONFIG_PIC32MX_MICROCHIPL_LITE=n CONFIG_MIPS32_TOOLCHAIN_MICROCHIPL_LITE=n
# #
# Individual subsystems can be enabled: # Individual subsystems can be enabled:
@ -120,25 +132,18 @@ CONFIG_PIC32MX_ICESEL=1
# PIC32MX specific serial device driver settings # PIC32MX specific serial device driver settings
# #
CONFIG_UART1_SERIAL_CONSOLE=y CONFIG_UART1_SERIAL_CONSOLE=y
CONFIG_UART2_SERIAL_CONSOLE=n
CONFIG_UART1_TXBUFSIZE=256 CONFIG_UART1_TXBUFSIZE=256
CONFIG_UART2_TXBUFSIZE=256
CONFIG_UART1_RXBUFSIZE=256 CONFIG_UART1_RXBUFSIZE=256
CONFIG_UART2_RXBUFSIZE=256
CONFIG_UART1_BAUD=115200 CONFIG_UART1_BAUD=115200
CONFIG_UART2_BAUD=115200
CONFIG_UART1_BITS=8 CONFIG_UART1_BITS=8
CONFIG_UART2_BITS=8
CONFIG_UART1_PARITY=0 CONFIG_UART1_PARITY=0
CONFIG_UART2_PARITY=0
CONFIG_UART1_2STOP=0 CONFIG_UART1_2STOP=0
CONFIG_UART2_2STOP=0
# #
# General build options # General build options
@ -171,27 +176,12 @@ CONFIG_JULIAN_TIME=n
CONFIG_DEV_CONSOLE=y CONFIG_DEV_CONSOLE=y
CONFIG_DEV_LOWCONSOLE=n CONFIG_DEV_LOWCONSOLE=n
CONFIG_MUTEX_TYPES=n CONFIG_MUTEX_TYPES=n
CONFIG_PRIORITY_INHERITANCE=n
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SEM_NNESTPRIO=0
CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_DISABLE=n
CONFIG_FDCLONE_STDIO=n CONFIG_FDCLONE_STDIO=n
CONFIG_SDCLONE_DISABLE=y CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WORKQUEUE=n
CONFIG_SCHED_WORKPRIORITY=192
CONFIG_SCHED_WORKPERIOD=50000
CONFIG_SCHED_WORKSTACKSIZE=1024
CONFIG_SIG_SIGWORK=17
CONFIG_SCHED_WAITPID=y CONFIG_SCHED_WAITPID=y
CONFIG_SCHED_ATEXIT=n CONFIG_SCHED_ATEXIT=n
#
# Settings for nxflat
#
CONFIG_NXFLAT=n
CONFIG_NXFLAT_DUMPBUFFER=n
CONFIG_SYMTAB_ORDEREDBYNAME=y
# #
# The following can be used to disable categories of # The following can be used to disable categories of
# APIs supported by the OS. If the compiler supports # APIs supported by the OS. If the compiler supports
@ -271,15 +261,12 @@ CONFIG_FS_ROMFS=n
# #
CONFIG_MMCSD=y CONFIG_MMCSD=y
CONFIG_MMCSD_SPI=y
CONFIG_MTD=y
# #
# SPI-based MMC/SD driver # SPI-based MMC/SD driver
# #
CONFIG_MMCSD_NSLOTS=1 CONFIG_MMCSD_NSLOTS=1
CONFIG_MMCSD_READONLY=n CONFIG_MMCSD_READONLY=n
CONFIG_MMCSD_SPICLOCK=12500000
# #
# Block driver buffering # Block driver buffering
@ -294,130 +281,6 @@ CONFIG_SDIO_DMA=n
CONFIG_MMCSD_MMCSUPPORT=n CONFIG_MMCSD_MMCSUPPORT=n
CONFIG_MMCSD_HAVECARDDETECT=n CONFIG_MMCSD_HAVECARDDETECT=n
#
# TCP/IP and UDP support via uIP
#
CONFIG_NET=n
CONFIG_NET_IPv6=n
CONFIG_NSOCKET_DESCRIPTORS=0
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_BUFSIZE=420
CONFIG_NET_TCP=n
CONFIG_NET_TCP_CONNS=40
CONFIG_NET_MAX_LISTENPORTS=40
CONFIG_NET_UDP=n
CONFIG_NET_UDP_CHECKSUMS=y
#CONFIG_NET_UDP_CONNS=10
CONFIG_NET_ICMP=n
CONFIG_NET_ICMP_PING=n
#CONFIG_NET_PINGADDRCONF=0
CONFIG_NET_STATISTICS=y
#CONFIG_NET_RECEIVE_WINDOW=
#CONFIG_NET_ARPTAB_SIZE=8
CONFIG_NET_BROADCAST=n
#
# UIP Network Utilities
#
CONFIG_NET_DHCP_LIGHT=n
CONFIG_NET_RESOLV_ENTRIES=4
#
# USB Device Configuration
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
CONFIG_USBDEV_DUALSPEED=n
CONFIG_USBDEV_SELFPOWERED=y
CONFIG_USBDEV_REMOTEWAKEUP=n
CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# USB Serial Device Configuration
#
CONFIG_PL2303=n
CONFIG_PL2303_EPINTIN=1
CONFIG_PL2303_EPBULKOUT=2
CONFIG_PL2303_EPBULKIN=5
CONFIG_PL2303_NWRREQS=4
CONFIG_PL2303_NRDREQS=4
CONFIG_PL2303_VENDORID=0x067b
CONFIG_PL2303_PRODUCTID=0x2303
CONFIG_PL2303_VENDORSTR="Nuttx"
CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
CONFIG_PL2303_RXBUFSIZE=512
CONFIG_PL2303_TXBUFSIZE=512
#
# USB serial device class driver (Standard CDC ACM class)
#
CONFIG_CDCACM=n
CONFIG_CDCACM_CONSOLE=n
#CONFIG_CDCACM_EP0MAXPACKET
CONFIG_CDCACM_EPINTIN=1
#CONFIG_CDCACM_EPINTIN_FSSIZE
#CONFIG_CDCACM_EPINTIN_HSSIZE
CONFIG_CDCACM_EPBULKOUT=3
#CONFIG_CDCACM_EPBULKOUT_FSSIZE
#CONFIG_CDCACM_EPBULKOUT_HSSIZE
CONFIG_CDCACM_EPBULKIN=2
#CONFIG_CDCACM_EPBULKIN_FSSIZE
#CONFIG_CDCACM_EPBULKIN_HSSIZE
#CONFIG_CDCACM_NWRREQS
#CONFIG_CDCACM_NRDREQS
#CONFIG_CDCACM_VENDORID
#CONFIG_CDCACM_VENDORSTR
#CONFIG_CDCACM_PRODUCTID
#CONFIG_CDCACM_PRODUCTSTR
#CONFIG_CDCACM_RXBUFSIZE
#CONFIG_CDCACM_TXBUFSIZE
#
# USB Storage Device Configuration
#
CONFIG_USBMSC=n
CONFIG_USBMSC_EP0MAXPACKET=64
CONFIG_USBMSC_EPBULKOUT=1
CONFIG_USBMSC_EPBULKIN=2
CONFIG_USBMSC_NRDREQS=8
CONFIG_USBMSC_NWRREQS=2
CONFIG_USBMSC_BULKINREQLEN=256
CONFIG_USBMSC_BULKOUTREQLEN=64
CONFIG_USBMSC_VENDORID=0x584e
CONFIG_USBMSC_VENDORSTR="NuttX"
CONFIG_USBMSC_PRODUCTID=0x5342
CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
CONFIG_USBMSC_VERSIONNO=0x0399
CONFIG_USBMSC_REMOVABLE=y
#
# Settings for examples/uip
#
CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
CONFIG_EXAMPLES_UIP_DHCPC=n
#
# Settings for examples/nettest
#
CONFIG_EXAMPLES_NETTEST_SERVER=n
CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
CONFIG_EXAMPLES_NETTEST_NOMAC=y
CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
#
# Settings for examples/ostest
#
CONFIG_EXAMPLES_OSTEST_LOOPS=1
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
# #
# Settings for apps/nshlib # Settings for apps/nshlib
# #
@ -433,66 +296,13 @@ CONFIG_NSH_ROMFSETC=n
CONFIG_NSH_CONSOLE=y CONFIG_NSH_CONSOLE=y
CONFIG_NSH_TELNET=n CONFIG_NSH_TELNET=n
CONFIG_NSH_ARCHINIT=y CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_IOBUFFER_SIZE=512
CONFIG_NSH_DHCPC=n
CONFIG_NSH_NOMAC=n
CONFIG_NSH_IPADDR=0x0a000002
CONFIG_NSH_DRIPADDR=0x0a000001
CONFIG_NSH_NETMASK=0xffffff00
CONFIG_NSH_ROMFSMOUNTPT="/etc"
CONFIG_NSH_INITSCRIPT="init.d/rcS"
CONFIG_NSH_ROMFSDEVNO=0
CONFIG_NSH_ROMFSSECTSIZE=64
CONFIG_NSH_FATDEVNO=1
CONFIG_NSH_FATSECTSIZE=512
CONFIG_NSH_FATNSECTORS=1024
CONFIG_NSH_FATMOUNTPT="/tmp"
# #
# Architecture-specific NSH options # Architecture-specific NSH options
# #
CONFIG_NSH_MMCSDSPIPORTNO=1
CONFIG_NSH_MMCSDSLOTNO=0 CONFIG_NSH_MMCSDSLOTNO=0
CONFIG_NSH_MMCSDMINOR=0 CONFIG_NSH_MMCSDMINOR=0
#
# Settings for examples/usbserial
#
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
#
# Settings for system/usbmsc
#
CONFIG_SYSTEM_USBMSC_NLUNS=1
CONFIG_SYSTEM_USBMSC_DEVMINOR1=0
CONFIG_SYSTEM_USBMSC_DEVPATH1="/dev/mmcsd0"
CONFIG_SYSTEM_USBMSC_TRACEINIT=n
CONFIG_SYSTEM_USBMSC_TRACECLASS=n
CONFIG_SYSTEM_USBMSC_TRACETRANSFERS=n
CONFIG_SYSTEM_USBMSC_TRACECONTROLLER=n
CONFIG_SYSTEM_USBMSC_TRACEINTERRUPTS=n
#
# Settings for system/cdcacm
#
# Configuration prequisites:
#
CONFIG_SYSTEM_CDCACM_DEVMINOR=0
CONFIG_SYSTEM_CDCACM_TRACEINIT=n
CONFIG_SYSTEM_CDCACM_TRACECLASS=n
CONFIG_SYSTEM_CDCACM_TRACETRANSFERS=n
CONFIG_SYSTEM_CDCACM_TRACECONTROLLER=n
CONFIG_SYSTEM_CDCACM_TRACEINTERRUPTS=n
# #
# Stack and heap information # Stack and heap information
# #