Add NX configuration for the STM3210E-EVAL board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3746 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
84b779ea6f
commit
9951e10f86
@ -1867,4 +1867,5 @@
|
|||||||
* arch/arm/src/stm32/stm32_lowputc.c and stm32_serial.c. Correct severl bugs
|
* arch/arm/src/stm32/stm32_lowputc.c and stm32_serial.c. Correct severl bugs
|
||||||
involving serial port configuration. These bugs are only critical if you
|
involving serial port configuration. These bugs are only critical if you
|
||||||
are trying to using multiple UARTs on STM32.
|
are trying to using multiple UARTs on STM32.
|
||||||
|
* configs/stm3210e-eval/src/up_lcd.c: Add a driver for the STM3210E-EVAL's LCD.
|
||||||
|
* configs/stm3210e-eval/nx: Add NX configuration for the STM3210E-EVAL.
|
||||||
|
|||||||
@ -160,7 +160,6 @@ int up_progmem_ispageerased(uint16_t page)
|
|||||||
uint32_t addr;
|
uint32_t addr;
|
||||||
uint16_t count;
|
uint16_t count;
|
||||||
uint16_t bwritten = 0;
|
uint16_t bwritten = 0;
|
||||||
uint16_t hword;
|
|
||||||
|
|
||||||
if (page >= STM32_FLASH_NPAGES)
|
if (page >= STM32_FLASH_NPAGES)
|
||||||
return -EFAULT;
|
return -EFAULT;
|
||||||
|
|||||||
@ -452,25 +452,41 @@ Where <subdir> is one of the following:
|
|||||||
to account for this. And (2) input is not automatically echoed so
|
to account for this. And (2) input is not automatically echoed so
|
||||||
you will have to turn local echo on.
|
you will have to turn local echo on.
|
||||||
|
|
||||||
|
nx:
|
||||||
|
---
|
||||||
|
And example using the NuttX graphics system (NX). This example
|
||||||
|
uses the Nokia 6100 LCD driver.
|
||||||
|
|
||||||
|
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
|
||||||
|
|
||||||
ostest:
|
ostest:
|
||||||
------
|
------
|
||||||
This configuration directory, performs a simple OS test using
|
This configuration directory, performs a simple OS test using
|
||||||
examples/ostest. By default, this project assumes that you are
|
examples/ostest. By default, this project assumes that you are
|
||||||
using the DFU bootloader.
|
using the DFU bootloader.
|
||||||
|
|
||||||
|
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin
|
||||||
|
|
||||||
RIDE
|
RIDE
|
||||||
----
|
----
|
||||||
This configuration builds a trivial bring-up binary. It is
|
This configuration builds a trivial bring-up binary. It is
|
||||||
useful only because it words with the RIDE7 IDE and R-Link debugger.
|
useful only because it words with the RIDE7 IDE and R-Link debugger.
|
||||||
|
|
||||||
|
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
|
||||||
|
|
||||||
usbserial:
|
usbserial:
|
||||||
---------
|
---------
|
||||||
This configuration directory exercises the USB serial class
|
This configuration directory exercises the USB serial class
|
||||||
driver at examples/usbserial. See examples/README.txt for
|
driver at examples/usbserial. See examples/README.txt for
|
||||||
more information.
|
more information.
|
||||||
|
|
||||||
|
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin
|
||||||
|
|
||||||
usbstorage:
|
usbstorage:
|
||||||
----------
|
----------
|
||||||
This configuration directory exercises the USB mass storage
|
This configuration directory exercises the USB mass storage
|
||||||
class driver at examples/usbstorage. See examples/README.txt for
|
class driver at examples/usbstorage. See examples/README.txt for
|
||||||
more information.
|
more information.
|
||||||
|
|
||||||
|
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin
|
||||||
|
|
||||||
|
|||||||
@ -303,9 +303,6 @@ CONFIG_HAVE_LIBM=n
|
|||||||
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||||
# desciptors by task_create() when a new task is started. If
|
# desciptors by task_create() when a new task is started. If
|
||||||
# set, all sockets will appear to be closed in the new task.
|
# set, all sockets will appear to be closed in the new task.
|
||||||
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
|
||||||
# This format will support execution of NuttX binaries located
|
|
||||||
# in a ROMFS filesystem (see examples/nxflat).
|
|
||||||
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||||
# handle delayed processing from interrupt handlers. This feature
|
# handle delayed processing from interrupt handlers. This feature
|
||||||
# is required for some drivers but, if there are not complaints,
|
# is required for some drivers but, if there are not complaints,
|
||||||
@ -334,9 +331,9 @@ CONFIG_ARCH_LOWPUTC=y
|
|||||||
CONFIG_RR_INTERVAL=200
|
CONFIG_RR_INTERVAL=200
|
||||||
CONFIG_SCHED_INSTRUMENTATION=n
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
CONFIG_TASK_NAME_SIZE=0
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
CONFIG_START_YEAR=2009
|
CONFIG_START_YEAR=2011
|
||||||
CONFIG_START_MONTH=9
|
CONFIG_START_MONTH=7
|
||||||
CONFIG_START_DAY=21
|
CONFIG_START_DAY=5
|
||||||
CONFIG_GREGORIAN_TIME=n
|
CONFIG_GREGORIAN_TIME=n
|
||||||
CONFIG_JULIAN_TIME=n
|
CONFIG_JULIAN_TIME=n
|
||||||
CONFIG_DEV_CONSOLE=y
|
CONFIG_DEV_CONSOLE=y
|
||||||
@ -348,13 +345,29 @@ CONFIG_SEM_NNESTPRIO=0
|
|||||||
CONFIG_FDCLONE_DISABLE=n
|
CONFIG_FDCLONE_DISABLE=n
|
||||||
CONFIG_FDCLONE_STDIO=n
|
CONFIG_FDCLONE_STDIO=n
|
||||||
CONFIG_SDCLONE_DISABLE=y
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
CONFIG_NXFLAT=n
|
|
||||||
CONFIG_SCHED_WORKQUEUE=y
|
CONFIG_SCHED_WORKQUEUE=y
|
||||||
CONFIG_SCHED_WORKPRIORITY=50
|
CONFIG_SCHED_WORKPRIORITY=50
|
||||||
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||||
CONFIG_SCHED_WORKSTACKSIZE=1024
|
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||||
CONFIG_SIG_SIGWORK=4
|
CONFIG_SIG_SIGWORK=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for NXFLAT
|
||||||
|
#
|
||||||
|
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||||
|
# This format will support execution of NuttX binaries located
|
||||||
|
# in a ROMFS filesystem (see examples/nxflat).
|
||||||
|
# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals
|
||||||
|
# with. CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and
|
||||||
|
# CONFIG_DEBUG_BINFMT have to be defined or
|
||||||
|
# CONFIG_NXFLAT_DUMPBUFFER does nothing.
|
||||||
|
# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table
|
||||||
|
# is ordered by symbol name
|
||||||
|
#
|
||||||
|
CONFIG_NXFLAT=y
|
||||||
|
CONFIG_NXFLAT_DUMPBUFFER=n
|
||||||
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||||
|
|
||||||
#
|
#
|
||||||
# The following can be used to disable categories of
|
# The following can be used to disable categories of
|
||||||
# APIs supported by the OS. If the compiler supports
|
# APIs supported by the OS. If the compiler supports
|
||||||
@ -459,6 +472,7 @@ CONFIG_PREALLOC_TIMERS=4
|
|||||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
#
|
||||||
CONFIG_FS_FAT=y
|
CONFIG_FS_FAT=y
|
||||||
CONFIG_FS_ROMFS=n
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
|||||||
@ -1,5 +1,5 @@
|
|||||||
#!/bin/bash
|
#!/bin/bash
|
||||||
# configs/stm3210e-eval/dfu/setenv.sh
|
# configs/stm3210e-eval/nsh2/setenv.sh
|
||||||
#
|
#
|
||||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
|||||||
174
configs/stm3210e-eval/nx/Make.defs
Normal file
174
configs/stm3210e-eval/nx/Make.defs
Normal file
@ -0,0 +1,174 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/stm3210e-eval/nx/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
# Setup for the selected toolchain
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_STM32_DFU),y)
|
||||||
|
LDSCRIPT = ld.script.dfu
|
||||||
|
else
|
||||||
|
LDSCRIPT = ld.script
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
|
||||||
|
# CodeSourcery under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
|
||||||
|
# CodeSourcery under Linux
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_DEVKITARM),y)
|
||||||
|
# devkitARM under Windows
|
||||||
|
CROSSDEV = arm-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_RAISONANCE),y)
|
||||||
|
# Raisonance RIDE7 under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_STM32_BUILDROOT),y)
|
||||||
|
# NuttX buildroot under Linux or Cygwin
|
||||||
|
CROSSDEV = arm-elf-
|
||||||
|
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -Os
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT)}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nx/$(LDSCRIPT)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define PREPROCESS
|
||||||
|
@echo "CPP: $1->$2"
|
||||||
|
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILEXX
|
||||||
|
@echo "CXX: $1"
|
||||||
|
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
39
configs/stm3210e-eval/nx/appconfig
Normal file
39
configs/stm3210e-eval/nx/appconfig
Normal file
@ -0,0 +1,39 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/stm3210e-eval/nx/appconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
# Path to example in apps/examples containing the user_start entry point
|
||||||
|
|
||||||
|
CONFIGURED_APPS += examples/nx
|
||||||
|
|
||||||
975
configs/stm3210e-eval/nx/defconfig
Normal file
975
configs/stm3210e-eval/nx/defconfig
Normal file
@ -0,0 +1,975 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/stm3210e-eval/nx/defconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# architecture selection
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||||
|
# processor architecture.
|
||||||
|
# CONFIG_ARCH_family - for use in C code. This identifies the
|
||||||
|
# particular chip family that the architecture is implemented
|
||||||
|
# in.
|
||||||
|
# CONFIG_ARCH_architecture - for use in C code. This identifies the
|
||||||
|
# specific architecture within the chip familyl.
|
||||||
|
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||||
|
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||||
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||||
|
# the board that supports the particular chip or SoC.
|
||||||
|
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||||
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||||
|
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||||
|
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||||
|
# CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||||
|
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
|
||||||
|
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||||
|
# stack. If defined, this symbol is the size of the interrupt
|
||||||
|
# stack in bytes. If not defined, the user task stacks will be
|
||||||
|
# used during interrupt handling.
|
||||||
|
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||||
|
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
|
||||||
|
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||||
|
# cause a 100 second delay during boot-up. This 100 second delay
|
||||||
|
# serves no purpose other than it allows you to calibrate
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||||
|
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||||
|
# the delay actually is 100 seconds.
|
||||||
|
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||||
|
#
|
||||||
|
CONFIG_ARCH=arm
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
CONFIG_ARCH_CORTEXM3=y
|
||||||
|
CONFIG_ARCH_CHIP=stm32
|
||||||
|
CONFIG_ARCH_CHIP_STM32F103ZET6=y
|
||||||
|
CONFIG_ARCH_BOARD=stm3210e-eval
|
||||||
|
CONFIG_ARCH_BOARD_STM3210E_EVAL=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=5483
|
||||||
|
CONFIG_DRAM_SIZE=0x00010000
|
||||||
|
CONFIG_DRAM_START=0x20000000
|
||||||
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=n
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_ARCH_BOOTLOADER=n
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_BUTTONS=n
|
||||||
|
CONFIG_ARCH_CALIBRATION=n
|
||||||
|
CONFIG_ARCH_DMA=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Identify toolchain and linker options
|
||||||
|
#
|
||||||
|
CONFIG_STM32_CODESOURCERYW=y
|
||||||
|
CONFIG_STM32_CODESOURCERYL=n
|
||||||
|
CONFIG_STM32_DEVKITARM=n
|
||||||
|
CONFIG_STM32_RAISONANCE=n
|
||||||
|
CONFIG_STM32_BUILDROOT=n
|
||||||
|
CONFIG_STM32_DFU=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
# AHB:
|
||||||
|
CONFIG_STM32_DMA1=n
|
||||||
|
CONFIG_STM32_DMA2=y
|
||||||
|
CONFIG_STM32_CRC=n
|
||||||
|
CONFIG_STM32_FSMC=y
|
||||||
|
CONFIG_STM32_SDIO=y
|
||||||
|
# APB1:
|
||||||
|
CONFIG_STM32_TIM2=n
|
||||||
|
CONFIG_STM32_TIM3=n
|
||||||
|
CONFIG_STM32_TIM4=n
|
||||||
|
CONFIG_STM32_TIM5=n
|
||||||
|
CONFIG_STM32_TIM6=n
|
||||||
|
CONFIG_STM32_TIM7=n
|
||||||
|
CONFIG_STM32_WWDG=n
|
||||||
|
CONFIG_STM32_SPI2=n
|
||||||
|
CONFIG_STM32_SPI4=n
|
||||||
|
CONFIG_STM32_USART2=y
|
||||||
|
CONFIG_STM32_USART3=n
|
||||||
|
CONFIG_STM32_UART4=n
|
||||||
|
CONFIG_STM32_UART5=n
|
||||||
|
CONFIG_STM32_I2C1=y
|
||||||
|
CONFIG_STM32_I2C2=n
|
||||||
|
CONFIG_STM32_USB=y
|
||||||
|
CONFIG_STM32_CAN=n
|
||||||
|
CONFIG_STM32_BKP=n
|
||||||
|
CONFIG_STM32_PWR=n
|
||||||
|
CONFIG_STM32_DAC=n
|
||||||
|
# APB2:
|
||||||
|
CONFIG_STM32_ADC1=n
|
||||||
|
CONFIG_STM32_ADC2=n
|
||||||
|
CONFIG_STM32_TIM1=n
|
||||||
|
CONFIG_STM32_SPI1=n
|
||||||
|
CONFIG_STM32_TIM8=n
|
||||||
|
CONFIG_STM32_USART1=y
|
||||||
|
CONFIG_STM32_ADC3=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# STM32F103Z specific serial device driver settings
|
||||||
|
#
|
||||||
|
# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the
|
||||||
|
# console and ttys0 (default is the USART1).
|
||||||
|
# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received.
|
||||||
|
# This specific the size of the receive buffer
|
||||||
|
# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before
|
||||||
|
# being sent. This specific the size of the transmit buffer
|
||||||
|
# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be
|
||||||
|
# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||||
|
# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||||
|
# CONFIG_USARTn_2STOP - Two stop bits
|
||||||
|
#
|
||||||
|
CONFIG_USART1_SERIAL_CONSOLE=y
|
||||||
|
CONFIG_USART2_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_USART3_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_USART4_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_USART5_SERIAL_CONSOLE=n
|
||||||
|
|
||||||
|
CONFIG_USART1_TXBUFSIZE=256
|
||||||
|
CONFIG_USART2_TXBUFSIZE=256
|
||||||
|
CONFIG_USART3_TXBUFSIZE=256
|
||||||
|
CONFIG_USART4_TXBUFSIZE=256
|
||||||
|
CONFIG_USART5_TXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_USART1_RXBUFSIZE=256
|
||||||
|
CONFIG_USART2_RXBUFSIZE=256
|
||||||
|
CONFIG_USART3_RXBUFSIZE=256
|
||||||
|
CONFIG_USART4_RXBUFSIZE=256
|
||||||
|
CONFIG_USART5_RXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_USART1_BAUD=115200
|
||||||
|
CONFIG_USART2_BAUD=115200
|
||||||
|
CONFIG_USART3_BAUD=115200
|
||||||
|
CONFIG_USART4_BAUD=115200
|
||||||
|
CONFIG_USART5_BAUD=115200
|
||||||
|
|
||||||
|
CONFIG_USART1_BITS=8
|
||||||
|
CONFIG_USART2_BITS=8
|
||||||
|
CONFIG_USART3_BITS=8
|
||||||
|
CONFIG_USART4_BITS=8
|
||||||
|
CONFIG_USART5_BITS=8
|
||||||
|
|
||||||
|
CONFIG_USART1_PARITY=0
|
||||||
|
CONFIG_USART2_PARITY=0
|
||||||
|
CONFIG_USART3_PARITY=0
|
||||||
|
CONFIG_USART4_PARITY=0
|
||||||
|
CONFIG_USART5_PARITY=0
|
||||||
|
|
||||||
|
CONFIG_USART1_2STOP=0
|
||||||
|
CONFIG_USART2_2STOP=0
|
||||||
|
CONFIG_USART3_2STOP=0
|
||||||
|
CONFIG_USART4_2STOP=0
|
||||||
|
CONFIG_USART5_2STOP=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# STM32F103Z specific SSI device driver settings
|
||||||
|
#
|
||||||
|
# CONFIG_SSIn_DISABLE - select to disable all support for
|
||||||
|
# the SSI
|
||||||
|
# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support
|
||||||
|
# Poll-waiting is recommended if the interrupt rate would be to
|
||||||
|
# high in the interrupt driven case.
|
||||||
|
# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
|
||||||
|
# emptying the Rx FIFO. If the SPI frequency is high and this
|
||||||
|
# value is large, then larger values of this setting may cause
|
||||||
|
# Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
|
||||||
|
#
|
||||||
|
CONFIG_SSI0_DISABLE=n
|
||||||
|
CONFIG_SSI1_DISABLE=y
|
||||||
|
CONFIG_SSI_POLLWAIT=y
|
||||||
|
#CONFIG_SSI_TXLIMIT=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# General build options
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||||
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||||
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||||
|
# different loaders using the GNU objcopy program. This option
|
||||||
|
# should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||||
|
#
|
||||||
|
CONFIG_RRLOAD_BINARY=n
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_MOTOROLA_SREC=n
|
||||||
|
CONFIG_RAW_BINARY=n
|
||||||
|
CONFIG_HAVE_LIBM=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# General OS setup
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR - Identifies the relative path to the directory
|
||||||
|
# that builds the application to link with NuttX. Default: ../apps
|
||||||
|
# CONFIG_DEBUG - enables built-in debug options
|
||||||
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||||
|
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||||
|
# debug symbols (needed for use with a debugger).
|
||||||
|
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||||
|
# regions of memory to allocate from, this specifies the
|
||||||
|
# number of memory regions that the memory manager must
|
||||||
|
# handle and enables the API mm_addregion(start, end);
|
||||||
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||||
|
# time console output
|
||||||
|
# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
|
||||||
|
# or MSEC_PER_TICK=10. This setting may be defined to
|
||||||
|
# inform NuttX that the processor hardware is providing
|
||||||
|
# system timer interrupts at some interrupt interval other
|
||||||
|
# than 10 msec.
|
||||||
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||||
|
# this number of milliseconds; Round robin scheduling can
|
||||||
|
# be disabled by setting this value to zero.
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||||
|
# scheduler to monitor system performance
|
||||||
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||||
|
# task name to save in the TCB. Useful if scheduler
|
||||||
|
# instrumentation is selected. Set to zero to disable.
|
||||||
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||||
|
# Used to initialize the internal time logic.
|
||||||
|
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
|
||||||
|
# You would only need this if you are concerned about accurate
|
||||||
|
# time conversions in the past or in the distant future.
|
||||||
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
|
||||||
|
# would only need this if you are concerned about accurate
|
||||||
|
# time conversion in the distand past. You must also define
|
||||||
|
# CONFIG_GREGORIAN_TIME in order to use Julian time.
|
||||||
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||||
|
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||||
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||||
|
# driver (minimul support)
|
||||||
|
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||||
|
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||||
|
# inheritance on mutexes and semaphores.
|
||||||
|
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||||
|
# inheritance is enabled. It defines the maximum number of
|
||||||
|
# different threads (minus one) that can take counts on a
|
||||||
|
# semaphore with priority inheritance support. This may be
|
||||||
|
# set to zero if priority inheritance is disabled OR if you
|
||||||
|
# are only using semaphores as mutexes (only one holder) OR
|
||||||
|
# if no more than two threads participate using a counting
|
||||||
|
# semaphore.
|
||||||
|
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||||
|
# then this setting is the maximum number of higher priority
|
||||||
|
# threads (minus 1) than can be waiting for another thread
|
||||||
|
# to release a count on a semaphore. This value may be set
|
||||||
|
# to zero if no more than one thread is expected to wait for
|
||||||
|
# a semaphore.
|
||||||
|
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||||
|
# by task_create() when a new task is started. If set, all
|
||||||
|
# files/drivers will appear to be closed in the new task.
|
||||||
|
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||||
|
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||||
|
# when a new task is started. If set, all files/drivers will
|
||||||
|
# appear to be closed in the new task except for stdin, stdout,
|
||||||
|
# and stderr.
|
||||||
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||||
|
# desciptors by task_create() when a new task is started. If
|
||||||
|
# set, all sockets will appear to be closed in the new task.
|
||||||
|
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||||
|
# handle delayed processing from interrupt handlers. This feature
|
||||||
|
# is required for some drivers but, if there are not complaints,
|
||||||
|
# can be safely disabled. The worker thread also performs
|
||||||
|
# garbage collection -- completing any delayed memory deallocations
|
||||||
|
# from interrupt handlers. If the worker thread is disabled,
|
||||||
|
# then that clean will be performed by the IDLE thread instead
|
||||||
|
# (which runs at the lowest of priority and may not be appropriate
|
||||||
|
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
|
||||||
|
# is enabled, then the following options can also be used:
|
||||||
|
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
|
||||||
|
# thread. Default: 50
|
||||||
|
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
|
||||||
|
# work in units of microseconds. Default: 50*1000 (50 MS).
|
||||||
|
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
|
||||||
|
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||||
|
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||||
|
# the worker thread. Default: 4
|
||||||
|
#
|
||||||
|
#CONFIG_APPS_DIR=
|
||||||
|
CONFIG_DEBUG=n
|
||||||
|
CONFIG_DEBUG_VERBOSE=n
|
||||||
|
CONFIG_DEBUG_GRAPHICS=n
|
||||||
|
CONFIG_DEBUG_SYMBOLS=n
|
||||||
|
CONFIG_MM_REGIONS=1
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
CONFIG_START_YEAR=2011
|
||||||
|
CONFIG_START_MONTH=7
|
||||||
|
CONFIG_START_DAY=5
|
||||||
|
CONFIG_GREGORIAN_TIME=n
|
||||||
|
CONFIG_JULIAN_TIME=n
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=n
|
||||||
|
CONFIG_MUTEX_TYPES=n
|
||||||
|
CONFIG_PRIORITY_INHERITANCE=n
|
||||||
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||||
|
CONFIG_SEM_NNESTPRIO=0
|
||||||
|
CONFIG_FDCLONE_DISABLE=n
|
||||||
|
CONFIG_FDCLONE_STDIO=n
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_SCHED_WORKQUEUE=y
|
||||||
|
CONFIG_SCHED_WORKPRIORITY=50
|
||||||
|
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||||
|
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||||
|
CONFIG_SIG_SIGWORK=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for NXFLAT
|
||||||
|
#
|
||||||
|
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||||
|
# This format will support execution of NuttX binaries located
|
||||||
|
# in a ROMFS filesystem (see examples/nxflat).
|
||||||
|
# CONFIG_NXFLAT_DUMPBUFFER. Dump a most buffers that NXFFLAT deals
|
||||||
|
# with. CONFIG_DEBUG, CONFIG_DEBUG_VERBOSE, and
|
||||||
|
# CONFIG_DEBUG_BINFMT have to be defined or
|
||||||
|
# CONFIG_NXFLAT_DUMPBUFFER does nothing.
|
||||||
|
# CONFIG_SYMTAB_ORDEREDBYNAME. Select if the system symbol table
|
||||||
|
# is ordered by symbol name
|
||||||
|
#
|
||||||
|
CONFIG_NXFLAT=y
|
||||||
|
CONFIG_NXFLAT_DUMPBUFFER=n
|
||||||
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# The following can be used to disable categories of
|
||||||
|
# APIs supported by the OS. If the compiler supports
|
||||||
|
# weak functions, then it should not be necessary to
|
||||||
|
# disable functions unless you want to restrict usage
|
||||||
|
# of those APIs.
|
||||||
|
#
|
||||||
|
# There are certain dependency relationships in these
|
||||||
|
# features.
|
||||||
|
#
|
||||||
|
# o mq_notify logic depends on signals to awaken tasks
|
||||||
|
# waiting for queues to become full or empty.
|
||||||
|
# o pthread_condtimedwait() depends on signals to wake
|
||||||
|
# up waiting tasks.
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_CLOCK=n
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||||
|
CONFIG_DISABLE_PTHREAD=n
|
||||||
|
CONFIG_DISABLE_SIGNALS=n
|
||||||
|
CONFIG_DISABLE_MQUEUE=n
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Misc libc settings
|
||||||
|
#
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||||
|
# little smaller if we do not support fieldwidthes
|
||||||
|
#
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Allow for architecture optimized implementations
|
||||||
|
#
|
||||||
|
# The architecture can provide optimized versions of the
|
||||||
|
# following to improve system performance
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_MEMCPY=n
|
||||||
|
CONFIG_ARCH_MEMCMP=n
|
||||||
|
CONFIG_ARCH_MEMMOVE=n
|
||||||
|
CONFIG_ARCH_MEMSET=n
|
||||||
|
CONFIG_ARCH_STRCMP=n
|
||||||
|
CONFIG_ARCH_STRCPY=n
|
||||||
|
CONFIG_ARCH_STRNCPY=n
|
||||||
|
CONFIG_ARCH_STRLEN=n
|
||||||
|
CONFIG_ARCH_STRNLEN=n
|
||||||
|
CONFIG_ARCH_BZERO=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||||
|
# active tasks. This value must be a power of two.
|
||||||
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||||
|
# of parameters that a task may receive (i.e., maxmum value
|
||||||
|
# of 'argc')
|
||||||
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||||
|
# specific data that can be retained
|
||||||
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||||
|
# descriptors (one for each open)
|
||||||
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||||
|
# can be fopen'ed
|
||||||
|
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||||
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||||
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||||
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# message structures to minimize dynamic allocations
|
||||||
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||||
|
# a fixed payload size given by this settin (does not include
|
||||||
|
# other message structure overhead.
|
||||||
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||||
|
# can be passed to a watchdog handler
|
||||||
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# watchdog structures to minimize dynamic allocations
|
||||||
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||||
|
# timer structures. The system manages a pool of preallocated
|
||||||
|
# timer structures to minimize dynamic allocations. Set to
|
||||||
|
# zero for all dynamic allocations.
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=12
|
||||||
|
CONFIG_NFILE_STREAMS=12
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=256
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Framebuffer driver options
|
||||||
|
#
|
||||||
|
CONFIG_FB_CMAP=n
|
||||||
|
CONFIG_FB_HWCURSOR=n
|
||||||
|
CONFIG_FB_HWCURSORIMAGE=n
|
||||||
|
#CONFIG_FB_HWCURSORSIZE
|
||||||
|
#CONFIG_FB_TRANSPARENCY
|
||||||
|
|
||||||
|
#
|
||||||
|
# Filesystem configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
#
|
||||||
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_MMCSD_NSLOTS
|
||||||
|
# Number of MMC/SD slots supported by the driver
|
||||||
|
# CONFIG_MMCSD_READONLY
|
||||||
|
# Provide read-only access (default is read/write)
|
||||||
|
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
|
||||||
|
# Default is 20MHz.
|
||||||
|
#
|
||||||
|
CONFIG_MMCSD_NSLOTS=1
|
||||||
|
CONFIG_MMCSD_READONLY=n
|
||||||
|
CONFIG_MMCSD_SPICLOCK=12500000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Block driver buffering
|
||||||
|
#
|
||||||
|
# CONFIG_FS_READAHEAD
|
||||||
|
# Enable read-ahead buffering
|
||||||
|
# CONFIG_FS_WRITEBUFFER
|
||||||
|
# Enable write buffering
|
||||||
|
#
|
||||||
|
CONFIG_FS_READAHEAD=n
|
||||||
|
CONFIG_FS_WRITEBUFFER=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SDIO-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_SDIO_DMA
|
||||||
|
# SDIO driver supports DMA
|
||||||
|
# CONFIG_MMCSD_MMCSUPPORT
|
||||||
|
# Enable support for MMC cards
|
||||||
|
# CONFIG_MMCSD_HAVECARDDETECT
|
||||||
|
# SDIO driver card detection is 100% accurate
|
||||||
|
#
|
||||||
|
CONFIG_SDIO_DMA=y
|
||||||
|
CONFIG_MMCSD_MMCSUPPORT=n
|
||||||
|
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# TCP/IP and UDP support via uIP
|
||||||
|
# CONFIG_NET - Enable or disable all network features
|
||||||
|
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||||
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||||
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||||
|
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||||
|
# CONFIG_NET_TCP - TCP support on or off
|
||||||
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||||
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||||
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||||
|
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||||
|
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||||
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||||
|
# CONFIG_NET_UDP - UDP support on or off
|
||||||
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||||
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||||
|
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||||
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||||
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||||
|
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||||
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||||
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||||
|
# CONFIG_NET_BROADCAST - Broadcast support
|
||||||
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||||
|
#
|
||||||
|
CONFIG_NET=n
|
||||||
|
CONFIG_NET_IPv6=n
|
||||||
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||||
|
CONFIG_NET_SOCKOPTS=y
|
||||||
|
CONFIG_NET_BUFSIZE=420
|
||||||
|
CONFIG_NET_TCP=n
|
||||||
|
CONFIG_NET_TCP_CONNS=40
|
||||||
|
CONFIG_NET_MAX_LISTENPORTS=40
|
||||||
|
CONFIG_NET_UDP=n
|
||||||
|
CONFIG_NET_UDP_CHECKSUMS=y
|
||||||
|
#CONFIG_NET_UDP_CONNS=10
|
||||||
|
CONFIG_NET_ICMP=n
|
||||||
|
CONFIG_NET_ICMP_PING=n
|
||||||
|
#CONFIG_NET_PINGADDRCONF=0
|
||||||
|
CONFIG_NET_STATISTICS=y
|
||||||
|
#CONFIG_NET_RECEIVE_WINDOW=
|
||||||
|
#CONFIG_NET_ARPTAB_SIZE=8
|
||||||
|
CONFIG_NET_BROADCAST=n
|
||||||
|
#CONFIG_NET_FWCACHE_SIZE=2
|
||||||
|
|
||||||
|
#
|
||||||
|
# UIP Network Utilities
|
||||||
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||||
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||||
|
#
|
||||||
|
CONFIG_NET_DHCP_LIGHT=n
|
||||||
|
CONFIG_NET_RESOLV_ENTRIES=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBDEV
|
||||||
|
# Enables USB device support
|
||||||
|
# CONFIG_USBDEV_ISOCHRONOUS
|
||||||
|
# Build in extra support for isochronous endpoints
|
||||||
|
# CONFIG_USBDEV_DUALSPEED
|
||||||
|
# Hardware handles high and full speed operation (USB 2.0)
|
||||||
|
# CONFIG_USBDEV_SELFPOWERED
|
||||||
|
# Will cause USB features to indicate that the device is
|
||||||
|
# self-powered
|
||||||
|
# CONFIG_USBDEV_MAXPOWER
|
||||||
|
# Maximum power consumption in mA
|
||||||
|
# CONFIG_USBDEV_TRACE
|
||||||
|
# Enables USB tracing for debug
|
||||||
|
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||||
|
# Number of trace entries to remember
|
||||||
|
#
|
||||||
|
CONFIG_USBDEV=n
|
||||||
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||||
|
CONFIG_USBDEV_DUALSPEED=n
|
||||||
|
CONFIG_USBDEV_SELFPOWERED=y
|
||||||
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||||
|
CONFIG_USBDEV_MAXPOWER=100
|
||||||
|
CONFIG_USBDEV_TRACE=n
|
||||||
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSER
|
||||||
|
# Enable compilation of the USB serial driver
|
||||||
|
# CONFIG_USBSER_EPINTIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# interrupt IN operation
|
||||||
|
# CONFIG_USBSER_EPBULKOUT
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk OUT operation
|
||||||
|
# CONFIG_USBSER_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk IN operation
|
||||||
|
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||||
|
# Size of the serial receive/transmit buffers
|
||||||
|
#
|
||||||
|
CONFIG_USBSER=n
|
||||||
|
CONFIG_USBSER_EPINTIN=1
|
||||||
|
CONFIG_USBSER_EPBULKOUT=2
|
||||||
|
CONFIG_USBSER_EPBULKIN=3
|
||||||
|
CONFIG_USBSER_NWRREQS=4
|
||||||
|
CONFIG_USBSER_NRDREQS=4
|
||||||
|
CONFIG_USBSER_VENDORID=0x067b
|
||||||
|
CONFIG_USBSER_PRODUCTID=0x2303
|
||||||
|
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||||
|
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||||
|
CONFIG_USBSER_RXBUFSIZE=512
|
||||||
|
CONFIG_USBSER_TXBUFSIZE=512
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Storage Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSTRG
|
||||||
|
# Enable compilation of the USB storage driver
|
||||||
|
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||||
|
# Max packet size for endpoint 0
|
||||||
|
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoints that support
|
||||||
|
# bulk OUT and IN operations
|
||||||
|
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||||
|
# The size of the buffer in each write/read request. This
|
||||||
|
# value needs to be at least as large as the endpoint
|
||||||
|
# maxpacket and ideally as large as a block device sector.
|
||||||
|
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSTRG_REMOVABLE
|
||||||
|
# Select if the media is removable
|
||||||
|
#
|
||||||
|
CONFIG_USBSTRG=n
|
||||||
|
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||||
|
CONFIG_USBSTRG_EPBULKOUT=2
|
||||||
|
CONFIG_USBSTRG_EPBULKIN=5
|
||||||
|
CONFIG_USBSTRG_NRDREQS=2
|
||||||
|
CONFIG_USBSTRG_NWRREQS=2
|
||||||
|
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||||
|
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||||
|
CONFIG_USBSTRG_VENDORID=0x584e
|
||||||
|
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||||
|
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||||
|
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||||
|
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||||
|
CONFIG_USBSTRG_REMOVABLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics related configuration settings
|
||||||
|
#
|
||||||
|
# CONFIG_NX
|
||||||
|
# Enables overall support for graphics library and NX
|
||||||
|
# CONFIG_NX_MULTIUSER
|
||||||
|
# Configures NX in multi-user mode
|
||||||
|
# CONFIG_NX_NPLANES
|
||||||
|
# Some YUV color formats requires support for multiple planes,
|
||||||
|
# one for each color component. Unless you have such special
|
||||||
|
# hardware, this value should be undefined or set to 1
|
||||||
|
# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP,
|
||||||
|
# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP,
|
||||||
|
# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and
|
||||||
|
# CONFIG_NX_DISABLE_32BPP
|
||||||
|
# NX supports a variety of pixel depths. You can save some
|
||||||
|
# memory by disabling support for unused color depths.
|
||||||
|
# CONFIG_NX_PACKEDMSFIRST
|
||||||
|
# If a pixel depth of less than 8-bits is used, then NX needs
|
||||||
|
# to know if the pixels pack from the MS to LS or from LS to MS
|
||||||
|
# CONFIG_NX_LCDDRIVER
|
||||||
|
# By default, NX builds to use a framebuffer driver (see
|
||||||
|
# include/nuttx/fb.h). If this option is defined, NX will
|
||||||
|
# build to use an LCD driver (see include/nuttx/lcd/lcd.h).
|
||||||
|
# CONFIG_LCD_MAXPOWER - The full-on power setting for an LCD device.
|
||||||
|
# CONFIG_LCD_MAXCONTRAST - The maximum contrast value for an LCD device.
|
||||||
|
# CONFIG_NX_MOUSE
|
||||||
|
# Build in support for mouse input
|
||||||
|
# CONFIG_NX_KBD
|
||||||
|
# Build in support of keypad/keyboard input
|
||||||
|
# CONFIG_NXTK_BORDERWIDTH
|
||||||
|
# Specifies with with of the border (in pixels) used with
|
||||||
|
# framed windows. The default is 4.
|
||||||
|
# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2
|
||||||
|
# Specify the colors of the border used with framed windows.
|
||||||
|
# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so
|
||||||
|
# is normally darker. The default is medium and dark grey,
|
||||||
|
# respectively
|
||||||
|
# CONFIG_NXTK_AUTORAISE
|
||||||
|
# If set, a window will be raised to the top if the mouse position
|
||||||
|
# is over a visible portion of the window. Default: A mouse
|
||||||
|
# button must be clicked over a visible portion of the window.
|
||||||
|
# CONFIG_NXFONTS_CHARBITS
|
||||||
|
# The number of bits in the character set. Current options are
|
||||||
|
# only 7 and 8. The default is 7.
|
||||||
|
# CONFIG_NXFONT_SANS
|
||||||
|
# At present, there is only one font. But if there were were more,
|
||||||
|
# then this option would select the sans serif font.
|
||||||
|
#
|
||||||
|
# NX Multi-user only options:
|
||||||
|
#
|
||||||
|
# CONFIG_NX_BLOCKING
|
||||||
|
# Open the client message queues in blocking mode. In this case,
|
||||||
|
# nx_eventhandler() will not return until a message is received and processed.
|
||||||
|
# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS
|
||||||
|
# Specifies the maximum number of messages that can fit in
|
||||||
|
# the message queues. No additional resources are allocated, but
|
||||||
|
# this can be set to prevent flooding of the client or server with
|
||||||
|
# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many
|
||||||
|
# messages are pre-allocated).
|
||||||
|
#
|
||||||
|
CONFIG_NX=y
|
||||||
|
CONFIG_NX_MULTIUSER=n
|
||||||
|
CONFIG_NX_NPLANES=1
|
||||||
|
CONFIG_NX_DISABLE_1BPP=y
|
||||||
|
CONFIG_NX_DISABLE_2BPP=y
|
||||||
|
CONFIG_NX_DISABLE_4BPP=y
|
||||||
|
CONFIG_NX_DISABLE_8BPP=y
|
||||||
|
CONFIG_NX_DISABLE_16BPP=n
|
||||||
|
CONFIG_NX_DISABLE_24BPP=y
|
||||||
|
CONFIG_NX_DISABLE_32BPP=y
|
||||||
|
CONFIG_NX_PACKEDMSFIRST=n
|
||||||
|
CONFIG_NX_LCDDRIVER=y
|
||||||
|
CONFIG_LCD_MAXPOWER=1
|
||||||
|
CONFIG_LCD_MAXCONTRAST=1
|
||||||
|
CONFIG_NX_MOUSE=y
|
||||||
|
CONFIG_NX_KBD=y
|
||||||
|
#CONFIG_NXTK_BORDERWIDTH=4
|
||||||
|
CONFIG_NXTK_BORDERCOLOR1=0xd69a
|
||||||
|
CONFIG_NXTK_BORDERCOLOR2=0xad55
|
||||||
|
CONFIG_NXTK_AUTORAISE=n
|
||||||
|
CONFIG_NXFONT_SANS=y
|
||||||
|
CONFIG_NXFONTS_CHARBITS=7
|
||||||
|
CONFIG_NX_BLOCKING=y
|
||||||
|
CONFIG_NX_MXSERVERMSGS=32
|
||||||
|
CONFIG_NX_MXCLIENTMSGS=16
|
||||||
|
|
||||||
|
#
|
||||||
|
# STM3210E-EVAL LCD Hardware Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_LCD_LANDSCAPE - Define for 320x240 display support.
|
||||||
|
# Default is 320x240 (this setting is informative only... not used).
|
||||||
|
# CONFIG_LCD_PORTRAIT - Define for 240x320 display support.
|
||||||
|
# Default is 320x240.
|
||||||
|
#
|
||||||
|
CONFIG_LCD_LANDSCAPE=n
|
||||||
|
CONFIG_LCD_PORTRAIT=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/uip
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nettest
|
||||||
|
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/ostest
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for apps/nshlib
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||||
|
# CONFIG_NSH_STRERROR - Use strerror(errno)
|
||||||
|
# CONFIG_NSH_LINELEN - Maximum length of one command line
|
||||||
|
# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
|
||||||
|
# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||||
|
# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
|
||||||
|
# CONFIG_NSH_DISABLEBG - Disable background commands
|
||||||
|
# CONFIG_NSH_ROMFSETC - Use startup script in /etc
|
||||||
|
# CONFIG_NSH_CONSOLE - Use serial console front end
|
||||||
|
# CONFIG_NSH_CONDEV - Select the serial device used to support
|
||||||
|
# the NSH console. Default: stdin and stdout
|
||||||
|
# CONFIG_NSH_TELNET - Use telnetd console front end
|
||||||
|
# CONFIG_NSH_ARCHINIT - Platform provides architecture
|
||||||
|
# specific initialization (nsh_archinitialize()).
|
||||||
|
#
|
||||||
|
# If CONFIG_NSH_TELNET is selected:
|
||||||
|
# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||||
|
# CONFIG_NSH_DHCPC - Obtain address using DHCP
|
||||||
|
# CONFIG_NSH_IPADDR - Provides static IP address
|
||||||
|
# CONFIG_NSH_DRIPADDR - Provides static router IP address
|
||||||
|
# CONFIG_NSH_NETMASK - Provides static network mask
|
||||||
|
# CONFIG_NSH_NOMAC - Use a bogus MAC address
|
||||||
|
#
|
||||||
|
# If CONFIG_NSH_ROMFSETC is selected:
|
||||||
|
# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||||
|
# CONFIG_NSH_INITSCRIPT - Relative path to init script
|
||||||
|
# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||||
|
# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||||
|
# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
|
||||||
|
# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
|
||||||
|
# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
|
||||||
|
# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||||
|
#
|
||||||
|
CONFIG_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_NSH_STRERROR=n
|
||||||
|
CONFIG_NSH_LINELEN=64
|
||||||
|
CONFIG_NSH_STACKSIZE=2048
|
||||||
|
CONFIG_NSH_NESTDEPTH=3
|
||||||
|
CONFIG_NSH_DISABLESCRIPT=n
|
||||||
|
CONFIG_NSH_DISABLEBG=n
|
||||||
|
CONFIG_NSH_ROMFSETC=n
|
||||||
|
CONFIG_NSH_CONSOLE=y
|
||||||
|
CONFIG_NSH_CONDEV="/dev/ttyS1"
|
||||||
|
CONFIG_NSH_TELNET=n
|
||||||
|
CONFIG_NSH_ARCHINIT=y
|
||||||
|
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||||
|
CONFIG_NSH_DHCPC=n
|
||||||
|
CONFIG_NSH_NOMAC=n
|
||||||
|
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
||||||
|
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
||||||
|
CONFIG_NSH_ROMFSDEVNO=0
|
||||||
|
CONFIG_NSH_ROMFSSECTSIZE=64
|
||||||
|
CONFIG_NSH_FATDEVNO=1
|
||||||
|
CONFIG_NSH_FATSECTSIZE=512
|
||||||
|
CONFIG_NSH_FATNSECTORS=1024
|
||||||
|
CONFIG_NSH_FATMOUNTPT=/tmp
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture-specific NSH options
|
||||||
|
#
|
||||||
|
CONFIG_NSH_MMCSDSPIPORTNO=0
|
||||||
|
CONFIG_NSH_MMCSDSLOTNO=0
|
||||||
|
CONFIG_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/usbserial
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_INONLY
|
||||||
|
# Only verify IN (device-to-host) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
||||||
|
# Only verify OUT (host-to-device) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
||||||
|
# Send only small, single packet messages. Default: Send large and small.
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
||||||
|
# Send only large, multi-packet messages. Default: Send large and small.
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||||
|
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nx
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame-
|
||||||
|
# buffer driver for use in the test. Default: 0
|
||||||
|
# CONFIG_EXAMPLES_NX_DEVNO - The LCD device to select from the LCD
|
||||||
|
# driver for use in the test: Default: 0
|
||||||
|
# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options
|
||||||
|
# include 2, 4, 8, 16, 24, and 32. Default is 32.
|
||||||
|
# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to
|
||||||
|
# use pretty, framed NXTK windows with toolbars.
|
||||||
|
# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating
|
||||||
|
# the NX server. Default 2048
|
||||||
|
# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80
|
||||||
|
# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120
|
||||||
|
# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with
|
||||||
|
# nx_eventnotify(). Default: 4
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NX_VPLANE=0
|
||||||
|
CONFIG_EXAMPLES_NX_DEVNO=0
|
||||||
|
CONFIG_EXAMPLES_NX_BGCOLOR=0x0011
|
||||||
|
CONFIG_EXAMPLES_NX_COLOR1=0xaedc
|
||||||
|
CONFIG_EXAMPLES_NX_COLOR2=0xe7ff
|
||||||
|
CONFIG_EXAMPLES_NX_TBCOLOR=0xd69a
|
||||||
|
CONFIG_EXAMPLES_NX_FONTCOLOR=0x0000
|
||||||
|
CONFIG_EXAMPLES_NX_BPP=16
|
||||||
|
CONFIG_EXAMPLES_NX_RAWWINDOWS=n
|
||||||
|
CONFIG_EXAMPLES_NX_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_NX_CLIENTPRIO=80
|
||||||
|
CONFIG_EXAMPLES_NX_SERVERPRIO=120
|
||||||
|
CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
|
||||||
|
CONFIG_EXAMPLES_NX_EXTERNINIT=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||||
|
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||||
|
# (should also be =n for the STM3210E-EVAL which always runs from flash)
|
||||||
|
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||||
|
# but copy themselves entirely into RAM for better performance.
|
||||||
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||||
|
# all stack operations outside of the nuttx model.
|
||||||
|
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||||
|
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||||
|
# This is the thread that (1) performs the inital boot of the system up
|
||||||
|
# to the point where user_start() is spawned, and (2) there after is the
|
||||||
|
# IDLE thread that executes only when there is no other thread ready to
|
||||||
|
# run.
|
||||||
|
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||||
|
# for the main user thread that begins at the user_start() entry point.
|
||||||
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||||
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||||
|
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||||
|
# CONFIG_HEAP_SIZE - The size of the heap
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=n
|
||||||
|
CONFIG_BOOT_COPYTORAM=n
|
||||||
|
CONFIG_CUSTOM_STACK=n
|
||||||
|
CONFIG_STACK_POINTER=
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
CONFIG_HEAP_BASE=
|
||||||
|
CONFIG_HEAP_SIZE=
|
||||||
112
configs/stm3210e-eval/nx/ld.script
Normal file
112
configs/stm3210e-eval/nx/ld.script
Normal file
@ -0,0 +1,112 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/stm3210e-eval/nx/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
|
||||||
|
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
|
||||||
|
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
|
||||||
|
* begin execution by jumping to the entry point in the 0x0800:0000 address
|
||||||
|
* range.
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
|
||||||
|
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.);
|
||||||
|
|
||||||
|
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
.ARM.exidx : {
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
} >sram
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
|
||||||
|
.bss : {
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
111
configs/stm3210e-eval/nx/ld.script.dfu
Normal file
111
configs/stm3210e-eval/nx/ld.script.dfu
Normal file
@ -0,0 +1,111 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/stm3210e-eval/nx/ld.script.dfu
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The STM32F103ZET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
|
||||||
|
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
|
||||||
|
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
|
||||||
|
* load .text load address is 0x08003000 (leaving 464Kb).
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
|
||||||
|
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.);
|
||||||
|
|
||||||
|
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
.ARM.exidx : {
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
} >sram
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
|
||||||
|
.bss : {
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
62
configs/stm3210e-eval/nx/setenv.sh
Executable file
62
configs/stm3210e-eval/nx/setenv.sh
Executable file
@ -0,0 +1,62 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/stm3210e-eval/nx/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$_" = "$0" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
if [ ! -x "setenv.sh" ]; then
|
||||||
|
echo "This script must be executed from the top-level NuttX build directory"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then
|
||||||
|
export PATH_ORIG="${PATH}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# This the Cygwin path to the location where I installed the CodeSourcery
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the CodeSourcery toolchain in any other location
|
||||||
|
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||||
|
|
||||||
|
# This the Cygwin path to the location where I build the buildroot
|
||||||
|
# toolchain.
|
||||||
|
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
|
||||||
|
# Add the path to the toolchain to the PATH varialble
|
||||||
|
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
@ -40,17 +40,22 @@ CFLAGS += -I$(TOPDIR)/sched
|
|||||||
ASRCS =
|
ASRCS =
|
||||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||||
|
|
||||||
CSRCS = up_boot.c up_lcd.c up_leds.c up_buttons.c up_spi.c \
|
CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c
|
||||||
up_usbdev.c up_extcontext.c up_selectnor.c up_deselectnor.c \
|
|
||||||
up_selectsram.c up_deselectsram.c up_selectlcd.c \
|
ifeq ($(CONFIG_STM32_FSMC),y)
|
||||||
up_deselectlcd.c
|
CSRCS += up_lcd.c up_extcontext.c up_extmem.c up_selectnor.c \
|
||||||
|
up_deselectnor.c up_selectsram.c up_deselectsram.c \
|
||||||
|
up_selectlcd.c up_deselectlcd.c
|
||||||
|
endif
|
||||||
|
|
||||||
ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
||||||
CSRCS += up_nsh.c
|
CSRCS += up_nsh.c
|
||||||
endif
|
endif
|
||||||
|
|
||||||
ifeq ($(CONFIG_USBSTRG),y)
|
ifeq ($(CONFIG_USBSTRG),y)
|
||||||
CSRCS += up_usbstrg.c
|
CSRCS += up_usbstrg.c
|
||||||
endif
|
endif
|
||||||
|
|
||||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||||
|
|
||||||
SRCS = $(ASRCS) $(CSRCS)
|
SRCS = $(ASRCS) $(CSRCS)
|
||||||
|
|||||||
@ -189,32 +189,3 @@ void stm32_disablefsmc(void)
|
|||||||
regval &= ~RCC_AHBENR_FSMCEN;
|
regval &= ~RCC_AHBENR_FSMCEN;
|
||||||
putreg32(regval, STM32_RCC_AHBENR);
|
putreg32(regval, STM32_RCC_AHBENR);
|
||||||
}
|
}
|
||||||
|
|
||||||
/************************************************************************************
|
|
||||||
* Name: stm32_deselectsram
|
|
||||||
*
|
|
||||||
* Description:
|
|
||||||
* Disable NOR FLASH
|
|
||||||
*
|
|
||||||
************************************************************************************/
|
|
||||||
|
|
||||||
void stm32_deselectsram(struct extmem_save_s *restore)
|
|
||||||
{
|
|
||||||
/* Restore registers to their power up settings */
|
|
||||||
|
|
||||||
putreg32(0x000030d2, STM32_FSMC_BCR3);
|
|
||||||
|
|
||||||
/* Bank1 NOR/SRAM timing register configuration */
|
|
||||||
|
|
||||||
putreg32(0x0fffffff, STM32_FSMC_BTR3);
|
|
||||||
|
|
||||||
/* Disable AHB clocking to the FSMC */
|
|
||||||
|
|
||||||
stm32_disableclocks();
|
|
||||||
|
|
||||||
/* Restore GPIOs */
|
|
||||||
|
|
||||||
stm32_restoregpios(restore);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
|
|||||||
@ -77,6 +77,16 @@
|
|||||||
# define CONFIG_LCD_MAXPOWER 1
|
# define CONFIG_LCD_MAXPOWER 1
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/* Check orientation */
|
||||||
|
|
||||||
|
#if defined(CONFIG_LCD_PORTRAIT)
|
||||||
|
# if defined(CONFIG_LCD_LANDSCAPE)
|
||||||
|
# error "Cannot define both portrait and landscape orientations"
|
||||||
|
# endif
|
||||||
|
#elif !defined(CONFIG_LCD_LANDSCAPE)
|
||||||
|
# define CONFIG_LCD_LANDSCAPE 1
|
||||||
|
#endif
|
||||||
|
|
||||||
/* Define CONFIG_LCD_DEBUG to enable register-level debug output. Verbose debug must
|
/* Define CONFIG_LCD_DEBUG to enable register-level debug output. Verbose debug must
|
||||||
* also be enabled.
|
* also be enabled.
|
||||||
*/
|
*/
|
||||||
|
|||||||
@ -1,7 +1,7 @@
|
|||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* graphics/nxtk/nxtk_bitmapwindow.c
|
* graphics/nxtk/nxtk_bitmapwindow.c
|
||||||
*
|
*
|
||||||
* Copyright (C) 2008-2009 Gregory Nutt. All rights reserved.
|
* Copyright (C) 2008-2009, 2011 Gregory Nutt. All rights reserved.
|
||||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
*
|
*
|
||||||
* Redistribution and use in source and binary forms, with or without
|
* Redistribution and use in source and binary forms, with or without
|
||||||
@ -94,7 +94,7 @@
|
|||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
int nxtk_bitmapwindow(NXTKWINDOW hfwnd, FAR const struct nxgl_rect_s *dest,
|
int nxtk_bitmapwindow(NXTKWINDOW hfwnd, FAR const struct nxgl_rect_s *dest,
|
||||||
FAR const void *src[CONFIG_NX_NPLANES],
|
FAR const void **src,
|
||||||
FAR const struct nxgl_point_s *origin, unsigned int stride)
|
FAR const struct nxgl_point_s *origin, unsigned int stride)
|
||||||
{
|
{
|
||||||
FAR struct nxtk_framedwindow_s *fwnd = (FAR struct nxtk_framedwindow_s *)hfwnd;
|
FAR struct nxtk_framedwindow_s *fwnd = (FAR struct nxtk_framedwindow_s *)hfwnd;
|
||||||
|
|||||||
@ -286,7 +286,7 @@ EXTERN int nxtk_movewindow(NXTKWINDOW hfwnd, FAR const struct nxgl_rect_s *rect,
|
|||||||
|
|
||||||
EXTERN int nxtk_bitmapwindow(NXTKWINDOW hfwnd,
|
EXTERN int nxtk_bitmapwindow(NXTKWINDOW hfwnd,
|
||||||
FAR const struct nxgl_rect_s *dest,
|
FAR const struct nxgl_rect_s *dest,
|
||||||
FAR const void *src[CONFIG_NX_NPLANES],
|
FAR const void **src,
|
||||||
FAR const struct nxgl_point_s *origin,
|
FAR const struct nxgl_point_s *origin,
|
||||||
unsigned int stride);
|
unsigned int stride);
|
||||||
|
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user