diff --git a/configs/Kconfig b/configs/Kconfig index fd5fb80c5e..c7f8704765 100644 --- a/configs/Kconfig +++ b/configs/Kconfig @@ -1166,6 +1166,15 @@ config ARCH_BOARD_STM32F746_WS ---help--- Waveshare STM32F746 development board featuring the STM32F746IG MCU. +config ARCH_BOARD_B_L475E_IOT01A + bool "STMicro IoT Discovery kit" + depends on ARCH_CHIP_STM32L475VG + select ARCH_HAVE_LEDS + ---help--- + STMicro IoT development board featuring the STM32L475VG + MCU. The STM32L475VG is a Cortex-M4 optimised for low-power operation + at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM. + config ARCH_BOARD_STM32L476VG_DISCO bool "STMicro STM32L476VG -Discovery board" depends on ARCH_CHIP_STM32L476RG @@ -1613,6 +1622,7 @@ config ARCH_BOARD default "stm32f429i-disco" if ARCH_BOARD_STM32F429I_DISCO default "stm32f746g-disco" if ARCH_BOARD_STM32F746G_DISCO default "stm32f746-ws" if ARCH_BOARD_STM32F746_WS + default "b-l475e-iot01a" if ARCH_BOARD_B_L475E_IOT01A default "stm32l476vg-disco" if ARCH_BOARD_STM32L476VG_DISCO default "stm32l476-mdk" if ARCH_BOARD_STM32L476_MDK default "stm32ldiscovery" if ARCH_BOARD_STM32L_DISCOVERY @@ -2004,6 +2014,9 @@ endif if ARCH_BOARD_STM32F746G_DISCO source "configs/stm32f746g-disco/Kconfig" endif +if ARCH_BOARD_B_L475E_IOT01A +source "configs/b-l475e-iot01a/Kconfig" +endif if ARCH_BOARD_STM32F746_WS source "configs/stm32f746-ws/Kconfig" endif diff --git a/configs/b-l475e-iot01a/Kconfig b/configs/b-l475e-iot01a/Kconfig new file mode 100644 index 0000000000..60da88320a --- /dev/null +++ b/configs/b-l475e-iot01a/Kconfig @@ -0,0 +1,10 @@ +# +# For a description of the syntax of this configuration file, +# see the file kconfig-language.txt in the NuttX tools repository. +# + +# if ARCH_BOARD_B_L475E_IOT01A + +# TODO + +# endif \ No newline at end of file diff --git a/configs/b-l475e-iot01a/include/b-l475e-iot01a_clock.h b/configs/b-l475e-iot01a/include/b-l475e-iot01a_clock.h new file mode 100644 index 0000000000..98d789327e --- /dev/null +++ b/configs/b-l475e-iot01a/include/b-l475e-iot01a_clock.h @@ -0,0 +1,509 @@ +/************************************************************************************ + * configs/b-l475e-iot01a/include/b-l475e-iot01a_clock.h + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIG_B_L475E_IOT01A_INCLUDE_B_L475E_IOT01A_CLOCK_H +#define __CONFIG_B_L475E_IOT01A_INCLUDE_B_L475E_IOT01A_CLOCK_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include +#ifndef __ASSEMBLY__ +# include +#endif + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +#if 1 +# define HSI_CLOCK_CONFIG /* HSI-16 clock configuration */ +#elif 0 +/* Make sure you installed one! */ + +# define HSE_CLOCK_CONFIG /* HSE with 8 MHz xtal */ +#else +# define MSI_CLOCK_CONFIG /* MSI @ 4 MHz autotrimmed via LSE */ +#endif + +/* Clocking *************************************************************************/ + +#if defined(HSI_CLOCK_CONFIG) +/* The STMicro IoT board supports both HSE and LSE crystals. As shipped, the HSE + * crystal (X1) is not populated. Therefore the STMicro IoT board will need to run off the + * 16MHz HSI clock, or the 32khz-synced MSI, unless you install the HSE xtal. + * + * System Clock source : PLL (HSI) + * SYSCLK(Hz) : 80000000 Determined by PLL configuration + * HCLK(Hz) : 80000000 (STM32L4_RCC_CFGR_HPRE) (Max 80 MHz) + * AHB Prescaler : 1 (STM32L4_RCC_CFGR_HPRE) (Max 80 MHz) + * APB1 Prescaler : 1 (STM32L4_RCC_CFGR_PPRE1) (Max 80 MHz) + * APB2 Prescaler : 1 (STM32L4_RCC_CFGR_PPRE2) (Max 80 MHz) + * HSI Frequency(Hz) : 16000000 (nominal) + * PLLM : 1 (STM32L4_PLLCFG_PLLM) + * PLLN : 10 (STM32L4_PLLCFG_PLLN) + * PLLP : 0 (STM32L4_PLLCFG_PLLP) + * PLLQ : 0 (STM32L4_PLLCFG_PLLQ) + * PLLR : 2 (STM32L4_PLLCFG_PLLR) + * PLLSAI1N : 12 + * PLLSAI1Q : 4 + * Flash Latency(WS) : 4 + * Prefetch Buffer : OFF + * 48MHz for USB OTG FS, : Doable if required using PLLSAI1 or MSI + * SDIO and RNG clock + */ + +/* HSI - 16 MHz RC factory-trimmed + * LSI - 32 KHz RC (X2) + * MSI - variable up to 48 MHz, synchronized to LSE + * HSE - not installed (X1) + * LSE - 32.768 kHz installed + */ + +#define STM32L4_HSI_FREQUENCY 16000000ul +#define STM32L4_LSI_FREQUENCY 32000 +#define STM32L4_LSE_FREQUENCY 32768 + +#define STM32L4_BOARD_USEHSI 1 + +/* XXX sysclk mux = pllclk */ + +/* XXX pll source mux = hsi */ + +/* REVISIT: Trimming of the HSI and MSI is not yet supported. */ + +/* Main PLL Configuration. + * + * Formulae: + * + * VCO input frequency = PLL input clock frequency / PLLM, 1 <= PLLM <= 8 + * VCO output frequency = VCO input frequency × PLLN, 8 <= PLLN <= 86, frequency range 64 to 344 MHz + * PLL output P (SAI3) clock frequency = VCO frequency / PLLP, PLLP = 7, or 17, or 0 to disable + * PLL output Q (48M1) clock frequency = VCO frequency / PLLQ, PLLQ = 2, 4, 6, or 8, or 0 to disable + * PLL output R (CLK) clock frequency = VCO frequency / PLLR, PLLR = 2, 4, 6, or 8, or 0 to disable + * + * PLL output P is used for SAI + * PLL output Q is used for OTG FS, SDMMC, RNG + * PLL output R is used for SYSCLK + * PLLP = 0 (not used) + * PLLQ = 0 (not used) + * PLLR = 2 + * PLLN = 10 + * PLLM = 1 + * + * We will configure like this + * + * PLL source is HSI + * + * PLL_REF = STM32L4_HSI_FREQUENCY / PLLM + * = 16,000,000 / 1 + * = 16,000,000 + * + * PLL_VCO = PLL_REF * PLLN + * = 16,000,000 * 10 + * = 160,000,000 + * + * PLL_CLK = PLL_VCO / PLLR + * = 160,000,000 / 2 = 80,000,000 + * PLL_48M1 = disabled + * PLL_SAI3 = disabled + * + * ---------------------------------------- + * + * PLLSAI1 Configuration + * + * The clock input and M divider are identical to the main PLL. + * However the multiplier and postscalers are independent. + * The PLLSAI1 is configured only if CONFIG_STM32L4_SAI1PLL is defined + * + * SAI1VCO input frequency = PLL input clock frequency + * SAI1VCO output frequency = SAI1VCO input frequency × PLLSAI1N, 8 <= PLLSAI1N <= 86, frequency range 64 to 344 MHz + * SAI1PLL output P (SAI1) clock frequency = SAI1VCO frequency / PLLSAI1P, PLLP = 7, or 17, or 0 to disable + * SAI1PLL output Q (48M2) clock frequency = SAI1VCO frequency / PLLSAI1Q, PLLQ = 2, 4, 6, or 8, or 0 to disable + * SAI1PLL output R (ADC1) clock frequency = SAI1VCO frequency / PLLSAI1R, PLLR = 2, 4, 6, or 8, or 0 to disable + * + * We will configure like this + * + * PLLSAI1 disabled + * + * ---------------------------------------- + * + * PLLSAI2 Configuration + * + * The clock input and M divider are identical to the main PLL. + * However the multiplier and postscalers are independent. + * The PLLSAI2 is configured only if CONFIG_STM32L4_SAI2PLL is defined + * + * SAI2VCO input frequency = PLL input clock frequency + * SAI2VCO output frequency = SAI2VCO input frequency × PLLSAI2N, 8 <= PLLSAI1N <= 86, frequency range 64 to 344 MHz + * SAI2PLL output P (SAI2) clock frequency = SAI2VCO frequency / PLLSAI2P, PLLP = 7, or 17, or 0 to disable + * SAI2PLL output R (ADC2) clock frequency = SAI2VCO frequency / PLLSAI2R, PLLR = 2, 4, 6, or 8, or 0 to disable + * + * We will configure like this + * + * PLLSAI2 disabled + * + * ---------------------------------------- + * + * TODO: The STM32L is a low power peripheral and all these clocks should be configurable at runtime. + * + * ---------------------------------------- + * + * TODO These clock sources can be configured in Kconfig (this is not a board feature) + * USART1 + * USART2 + * USART3 + * UART4 + * UART5 + * LPUART1 + * I2C1 + * I2C2 + * I2C3 + * LPTIM1 + * LPTIM2 + * SAI1 + * SAI2 + * CLK48 + * ADC + * SWPMI + * DFSDM + */ + +/* prescaler common to all PLL inputs; will be 1 (XXX source is implicitly + as per comment above HSI) */ + +#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1) + +/* 'main' PLL config; we use this to generate our system clock via the R + * output. We set it up as 16 MHz / 1 * 10 / 2 = 80 MHz + * + * XXX NOTE: currently the main PLL is implicitly turned on and is implicitly + * the system clock; this should be configurable since not all applications may + * want things done this way. + */ + +#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(10) +#define STM32L4_PLLCFG_PLLP 0 +#undef STM32L4_PLLCFG_PLLP_ENABLED +#define STM32L4_PLLCFG_PLLQ RCC_PLLCFG_PLLQ_2 +#define STM32L4_PLLCFG_PLLQ_ENABLED +#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR(2) +#define STM32L4_PLLCFG_PLLR_ENABLED + +/* 'SAIPLL1' is used to generate the 48 MHz clock, since we can't + * do that with the main PLL's N value. We set N = 12, and enable + * the Q output (ultimately for CLK48) with /4. So, + * 16 MHz / 1 * 12 / 4 = 48 MHz + * + * XXX NOTE: currently the SAIPLL /must/ be explicitly selected in the + * menuconfig, or else all this is a moot point, and the various 48 MHz + * peripherals will not work (RNG at present). I would suggest removing + * that option from Kconfig altogether, and simply making it an option + * that is selected via a #define here, like all these other params. + */ + +#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(12) +#define STM32L4_PLLSAI1CFG_PLLP 0 +#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED +#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_4 +#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED +#define STM32L4_PLLSAI1CFG_PLLR 0 +#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED + +/* 'SAIPLL2' is not used in this application */ + +#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8) +#define STM32L4_PLLSAI2CFG_PLLP 0 +#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED +#define STM32L4_PLLSAI2CFG_PLLR 0 +#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED + +#define STM32L4_SYSCLK_FREQUENCY 80000000ul + +/* CLK48 will come from PLLSAI1 (implicitly Q) */ + +#define STM32L4_USE_CLK48 +#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1 + +/* enable the LSE oscillator, used automatically trim the MSI, and for RTC */ + +#define STM32L4_USE_LSE 1 + +/* AHB clock (HCLK) is SYSCLK (80MHz) */ + +#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ +#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY +#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */ + +/* APB1 clock (PCLK1) is HCLK/1 (80MHz) */ + +#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */ +#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY/1) + +/* Timers driven from APB1 will be twice PCLK1 */ +/* REVISIT : this can be configured */ + +#define STM32L4_APB1_TIM2_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM3_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM4_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM5_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM6_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM7_CLKIN (2*STM32L4_PCLK1_FREQUENCY) + +/* APB2 clock (PCLK2) is HCLK (80MHz) */ + +#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */ +#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY/1) + +/* Timers driven from APB2 will be twice PCLK2 */ +/* REVISIT : this can be configured */ + +#define STM32L4_APB2_TIM1_CLKIN (2*STM32L4_PCLK2_FREQUENCY) +#define STM32L4_APB2_TIM8_CLKIN (2*STM32L4_PCLK2_FREQUENCY) + +/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx + * otherwise frequency is 2xAPBx. + * Note: TIM1,8 are on APB2, others on APB1 + */ +/* REVISIT : this can be configured */ + +/* TODO SDMMC */ + +#elif defined(HSE_CLOCK_CONFIG) + +/* Use the HSE */ + +#define STM32L4_BOARD_USEHSE 1 + +/* XXX sysclk mux = pllclk */ + +/* XXX pll source mux = hse */ + +/* Prescaler common to all PLL inputs */ + +#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1) + +/* 'main' PLL config; we use this to generate our system clock */ + +#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(20) +#define STM32L4_PLLCFG_PLLP 0 +#undef STM32L4_PLLCFG_PLLP_ENABLED +#define STM32L4_PLLCFG_PLLQ 0 +#undef STM32L4_PLLCFG_PLLQ_ENABLED +#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2 +#define STM32L4_PLLCFG_PLLR_ENABLED + +/* 'SAIPLL1' is used to generate the 48 MHz clock */ + +#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(12) +#define STM32L4_PLLSAI1CFG_PLLP 0 +#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED +#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_2 +#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED +#define STM32L4_PLLSAI1CFG_PLLR 0 +#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED + +/* 'SAIPLL2' is not used in this application */ + +#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8) +#define STM32L4_PLLSAI2CFG_PLLP 0 +#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED +#define STM32L4_PLLSAI2CFG_PLLR 0 +#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED + +#define STM32L4_SYSCLK_FREQUENCY 80000000ul + +/* Enable CLK48; get it from PLLSAI1 */ + +#define STM32L4_USE_CLK48 +#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1 + +/* Enable LSE (for the RTC) */ + +#define STM32L4_USE_LSE 1 + +/* Configure the HCLK divisor (for the AHB bus, core, memory, and DMA */ + +#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ +#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY +#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */ + +/* Configure the APB1 prescaler */ + +#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */ +#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY/1) + +#define STM32L4_APB1_TIM2_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM3_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM4_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM5_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM6_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM7_CLKIN (2*STM32L4_PCLK1_FREQUENCY) + +/* Configure the APB2 prescaler */ + +#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */ +#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY/1) + +#define STM32L4_APB2_TIM1_CLKIN (2*STM32L4_PCLK2_FREQUENCY) +#define STM32L4_APB2_TIM8_CLKIN (2*STM32L4_PCLK2_FREQUENCY) + +#elif defined(MSI_CLOCK_CONFIG) + +/* Use the MSI; frequ = 4 MHz; autotrim from LSE */ + +#define STM32L4_BOARD_USEMSI 1 +#define STM32L4_BOARD_MSIRANGE RCC_CR_MSIRANGE_4M + +/* XXX sysclk mux = pllclk */ + +/* XXX pll source mux = msi */ + +/* prescaler common to all PLL inputs */ + +#define STM32L4_PLLCFG_PLLM RCC_PLLCFG_PLLM(1) + +/* 'main' PLL config; we use this to generate our system clock */ + +#define STM32L4_PLLCFG_PLLN RCC_PLLCFG_PLLN(40) +#define STM32L4_PLLCFG_PLLP 0 +#undef STM32L4_PLLCFG_PLLP_ENABLED +#define STM32L4_PLLCFG_PLLQ 0 +#undef STM32L4_PLLCFG_PLLQ_ENABLED +#define STM32L4_PLLCFG_PLLR RCC_PLLCFG_PLLR_2 +#define STM32L4_PLLCFG_PLLR_ENABLED + +/* 'SAIPLL1' is used to generate the 48 MHz clock */ + +#define STM32L4_PLLSAI1CFG_PLLN RCC_PLLSAI1CFG_PLLN(24) +#define STM32L4_PLLSAI1CFG_PLLP 0 +#undef STM32L4_PLLSAI1CFG_PLLP_ENABLED +#define STM32L4_PLLSAI1CFG_PLLQ RCC_PLLSAI1CFG_PLLQ_2 +#define STM32L4_PLLSAI1CFG_PLLQ_ENABLED +#define STM32L4_PLLSAI1CFG_PLLR 0 +#undef STM32L4_PLLSAI1CFG_PLLR_ENABLED + +/* 'SAIPLL2' is not used in this application */ + +#define STM32L4_PLLSAI2CFG_PLLN RCC_PLLSAI2CFG_PLLN(8) +#define STM32L4_PLLSAI2CFG_PLLP 0 +#undef STM32L4_PLLSAI2CFG_PLLP_ENABLED +#define STM32L4_PLLSAI2CFG_PLLR 0 +#undef STM32L4_PLLSAI2CFG_PLLR_ENABLED + +#define STM32L4_SYSCLK_FREQUENCY 80000000ul + +/* Enable CLK48; get it from PLLSAI1 */ + +#define STM32L4_USE_CLK48 +#define STM32L4_CLK48_SEL RCC_CCIPR_CLK48SEL_PLLSAI1 + +/* Enable LSE (for the RTC) */ + +#define STM32L4_USE_LSE 1 + +/* Configure the HCLK divisor (for the AHB bus, core, memory, and DMA */ + +#define STM32L4_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ +#define STM32L4_HCLK_FREQUENCY STM32L4_SYSCLK_FREQUENCY +#define STM32L4_BOARD_HCLK STM32L4_HCLK_FREQUENCY /* Same as above, to satisfy compiler */ + +/* Configure the APB1 prescaler */ + +#define STM32L4_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLK /* PCLK1 = HCLK / 1 */ +#define STM32L4_PCLK1_FREQUENCY (STM32L4_HCLK_FREQUENCY/1) + +#define STM32L4_APB1_TIM2_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM3_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM4_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM5_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM6_CLKIN (2*STM32L4_PCLK1_FREQUENCY) +#define STM32L4_APB1_TIM7_CLKIN (2*STM32L4_PCLK1_FREQUENCY) + +/* Configure the APB2 prescaler */ + +#define STM32L4_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK /* PCLK2 = HCLK / 1 */ +#define STM32L4_PCLK2_FREQUENCY (STM32L4_HCLK_FREQUENCY/1) + +#define STM32L4_APB2_TIM1_CLKIN (2*STM32L4_PCLK2_FREQUENCY) +#define STM32L4_APB2_TIM8_CLKIN (2*STM32L4_PCLK2_FREQUENCY) + +#endif + +/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx + * otherwise frequency is 2xAPBx. + * Note: TIM1,8,15,16,17 are on APB2, others on APB1 + */ + +#define BOARD_TIM1_FREQUENCY STM32L4_HCLK_FREQUENCY +#define BOARD_TIM2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) +#define BOARD_TIM3_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) +#define BOARD_TIM4_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) +#define BOARD_TIM5_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) +#define BOARD_TIM6_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) +#define BOARD_TIM7_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) +#define BOARD_TIM8_FREQUENCY STM32L4_HCLK_FREQUENCY +#define BOARD_TIM15_FREQUENCY STM32L4_HCLK_FREQUENCY +#define BOARD_TIM16_FREQUENCY STM32L4_HCLK_FREQUENCY +#define BOARD_TIM17_FREQUENCY STM32L4_HCLK_FREQUENCY +#define BOARD_LPTIM1_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) +#define BOARD_LPTIM2_FREQUENCY (STM32L4_HCLK_FREQUENCY / 2) + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" +{ +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIG_B_L475E_IOT01A_INCLUDE_B_L475E_IOT01A_CLOCK */ diff --git a/configs/b-l475e-iot01a/include/board.h b/configs/b-l475e-iot01a/include/board.h new file mode 100644 index 0000000000..6c10a3aab9 --- /dev/null +++ b/configs/b-l475e-iot01a/include/board.h @@ -0,0 +1,149 @@ +/************************************************************************************ + * configs/b-l475e-iot01a/include/board.h + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * Author: Simon Piriou + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __CONFIG_B_L475E_IOT01A_INCLUDE_BOARD_H +#define __CONFIG_B_L475E_IOT01A_INCLUDE_BOARD_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#ifndef __ASSEMBLY__ +# include +#endif + +#include + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* Clocking *************************************************************************/ + +#include + +/* LED definitions ******************************************************************/ +/* LEDs + * + * Two user LEDs are available on pins PA5 and PB14. + */ + +/* LED index values for use with board_userled() */ + +#define BOARD_LED1 0 +#define BOARD_LED2 1 +#define BOARD_NLEDS 2 + +/* LED bits for use with board_userled_all() */ + +#define BOARD_LED1_BIT (1 << BOARD_LED1) +#define BOARD_LED2_BIT (1 << BOARD_LED2) + +/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is + * defined. In that case, the usage by the board port is defined in + * include/board.h and src/sam_autoleds.c. The LEDs are used to encode + * OS-related events as follows: + * + * ------------------- ---------------------------- ------ + * SYMBOL Meaning LED + * ------------------- ---------------------------- ------ */ + +#define LED_STARTED 0 /* NuttX has been started OFF */ +#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */ +#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */ +#define LED_STACKCREATED 1 /* Idle stack created ON */ +#define LED_INIRQ 2 /* In an interrupt N/C */ +#define LED_SIGNAL 2 /* In a signal handler N/C */ +#define LED_ASSERTION 2 /* An assertion failed N/C */ +#define LED_PANIC 3 /* The system has crashed FLASH */ +#undef LED_IDLE /* MCU is is sleep mode Not used */ + +/* Thus if LED is statically on, NuttX has successfully booted and is, + * apparently, running normally. If LED is flashing at approximately + * 2Hz, then a fatal error has been detected and the system has halted. + */ + +/* Alternate function pin selections ************************************************/ + +/* USART1: Connected to STLink Debug via PB6, PB7 */ + +#define GPIO_USART1_RX GPIO_USART1_RX_2 +#define GPIO_USART1_TX GPIO_USART1_TX_2 + +/* UART4: Connected to arduino compatible pins DO/D1 via PA0, PA1 */ + +#define GPIO_UART4_RX GPIO_UART4_RX_1 +#define GPIO_UART4_TX GPIO_UART4_TX_1 + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" +{ +#else +#define EXTERN extern +#endif + +/************************************************************************************ + * Public Function Prototypes + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the initialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void stm32_boardinitialize(void); + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIG_B_L475E_IOT01A_INCLUDE_BOARD_H */ diff --git a/configs/b-l475e-iot01a/nsh/Make.defs b/configs/b-l475e-iot01a/nsh/Make.defs new file mode 100644 index 0000000000..899cfeb22f --- /dev/null +++ b/configs/b-l475e-iot01a/nsh/Make.defs @@ -0,0 +1,118 @@ +############################################################################ +# configs/b-l475e-iot01a/nsh/Make.defs +# +# Copyright (C) 2017 Gregory Nutt. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +# TODO add stm32 bootloader support +LDSCRIPT = flash.ld + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +# See http://dfu-util.sourceforge.net/ + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = + +define DOWNLOAD + $(Q) echo "Download firmware $(1).bin" + $(Q) st-flash write $(1).bin 0x08000000 +endef \ No newline at end of file diff --git a/configs/b-l475e-iot01a/nsh/defconfig b/configs/b-l475e-iot01a/nsh/defconfig new file mode 100644 index 0000000000..ecbe88986c --- /dev/null +++ b/configs/b-l475e-iot01a/nsh/defconfig @@ -0,0 +1,1179 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set +# CONFIG_DFU_BINARY is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set +# CONFIG_ARCH_DEBUG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG_ALERT=y +# CONFIG_DEBUG_FEATURES is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +CONFIG_ARCH_HAVE_HEAPCHECK=y +# CONFIG_HEAP_COLORATION is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_MISOC is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_RISCV is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_XTENSA is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX1 is not set +# CONFIG_ARCH_CHIP_IMX6 is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_MOXART is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STM32F0 is not set +# CONFIG_ARCH_CHIP_STM32F7 is not set +CONFIG_ARCH_CHIP_STM32L4=y +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_CHIP_TMS570 is not set +# CONFIG_ARCH_CHIP_XMC4 is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM23 is not set +# CONFIG_ARCH_CORTEXM3 is not set +# CONFIG_ARCH_CORTEXM33 is not set +CONFIG_ARCH_CORTEXM4=y +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +# CONFIG_ARCH_CORTEXA9 is not set +# CONFIG_ARCH_CORTEXR4 is not set +# CONFIG_ARCH_CORTEXR4F is not set +# CONFIG_ARCH_CORTEXR5 is not set +# CONFIG_ARCH_CORTEXR5F is not set +# CONFIG_ARCH_CORTEXR7 is not set +# CONFIG_ARCH_CORTEXR7F is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32l4" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +CONFIG_ARMV7M_CMNVECTOR=y +# CONFIG_ARMV7M_LAZYFPU is not set +CONFIG_ARCH_HAVE_FPU=y +# CONFIG_ARCH_HAVE_DPFPU is not set +CONFIG_ARCH_FPU=y +# CONFIG_ARCH_HAVE_TRUSTZONE is not set +CONFIG_ARM_HAVE_MPU_UNIFIED=y +# CONFIG_ARM_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y +# CONFIG_ARMV7M_TOOLCHAIN_CLANGL is not set +CONFIG_ARMV7M_HAVE_STACKCHECK=y +# CONFIG_ARMV7M_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +# CONFIG_SERIAL_TERMIOS is not set +# CONFIG_UART4_RS485 is not set +# CONFIG_SERIAL_DISABLE_REORDERING is not set + +# +# STM32L4 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32L432KB is not set +# CONFIG_ARCH_CHIP_STM32L432KC is not set +# CONFIG_ARCH_CHIP_STM32L442KC is not set +# CONFIG_ARCH_CHIP_STM32L433CB is not set +# CONFIG_ARCH_CHIP_STM32L433CC is not set +# CONFIG_ARCH_CHIP_STM32L433RB is not set +# CONFIG_ARCH_CHIP_STM32L433RC is not set +# CONFIG_ARCH_CHIP_STM32L433VC is not set +# CONFIG_ARCH_CHIP_STM32L443CC is not set +# CONFIG_ARCH_CHIP_STM32L443RC is not set +# CONFIG_ARCH_CHIP_STM32L443VC is not set +# CONFIG_ARCH_CHIP_STM32L451CC is not set +# CONFIG_ARCH_CHIP_STM32L451CE is not set +# CONFIG_ARCH_CHIP_STM32L451RC is not set +# CONFIG_ARCH_CHIP_STM32L451RE is not set +# CONFIG_ARCH_CHIP_STM32L451VC is not set +# CONFIG_ARCH_CHIP_STM32L451VE is not set +# CONFIG_ARCH_CHIP_STM32L452CC is not set +# CONFIG_ARCH_CHIP_STM32L452CE is not set +# CONFIG_ARCH_CHIP_STM32L452RC is not set +# CONFIG_ARCH_CHIP_STM32L452RE is not set +# CONFIG_ARCH_CHIP_STM32L452VC is not set +# CONFIG_ARCH_CHIP_STM32L452VE is not set +# CONFIG_ARCH_CHIP_STM32L462CE is not set +# CONFIG_ARCH_CHIP_STM32L462RE is not set +# CONFIG_ARCH_CHIP_STM32L462VE is not set +# CONFIG_ARCH_CHIP_STM32L475RG is not set +# CONFIG_ARCH_CHIP_STM32L475RE is not set +# CONFIG_ARCH_CHIP_STM32L475RC is not set +CONFIG_ARCH_CHIP_STM32L475VG=y +# CONFIG_ARCH_CHIP_STM32L475VE is not set +# CONFIG_ARCH_CHIP_STM32L475VC is not set +# CONFIG_ARCH_CHIP_STM32L476RG is not set +# CONFIG_ARCH_CHIP_STM32L476RE is not set +# CONFIG_ARCH_CHIP_STM32L486 is not set +# CONFIG_ARCH_CHIP_STM32L496ZE is not set +# CONFIG_ARCH_CHIP_STM32L496ZG is not set +# CONFIG_ARCH_CHIP_STM32L4A6 is not set +# CONFIG_STM32L4_STM32L4X1 is not set +# CONFIG_STM32L4_STM32L4X2 is not set +# CONFIG_STM32L4_STM32L4X3 is not set +CONFIG_STM32L4_STM32L4X5=y +# CONFIG_STM32L4_STM32L4X6 is not set +# CONFIG_STM32L4_STM32L431XX is not set +# CONFIG_STM32L4_STM32L432XX is not set +# CONFIG_STM32L4_STM32L433XX is not set +# CONFIG_STM32L4_STM32L442XX is not set +# CONFIG_STM32L4_STM32L443XX is not set +# CONFIG_STM32L4_STM32L451XX is not set +# CONFIG_STM32L4_STM32L452XX is not set +# CONFIG_STM32L4_STM32L462XX is not set +# CONFIG_STM32L4_STM32L471XX is not set +CONFIG_STM32L4_STM32L475XX=y +# CONFIG_STM32L4_STM32L476XX is not set +# CONFIG_STM32L4_STM32L486XX is not set +# CONFIG_STM32L4_STM32L496XX is not set +# CONFIG_STM32L4_STM32L4A6XX is not set +CONFIG_STM32L4_FLASH_OVERRIDE_DEFAULT=y +# CONFIG_STM32L4_FLASH_OVERRIDE_B is not set +# CONFIG_STM32L4_FLASH_OVERRIDE_C is not set +# CONFIG_STM32L4_FLASH_OVERRIDE_E is not set +# CONFIG_STM32L4_FLASH_OVERRIDE_G is not set +# CONFIG_STM32L4_FLASH_CONFIG_C is not set +# CONFIG_STM32L4_FLASH_CONFIG_E is not set +CONFIG_STM32L4_FLASH_CONFIG_G=y +# CONFIG_STM32L4_IO_CONFIG_K is not set +# CONFIG_STM32L4_IO_CONFIG_C is not set +CONFIG_STM32L4_IO_CONFIG_R=y +# CONFIG_STM32L4_IO_CONFIG_J is not set +# CONFIG_STM32L4_IO_CONFIG_M is not set +# CONFIG_STM32L4_IO_CONFIG_V is not set +# CONFIG_STM32L4_IO_CONFIG_Q is not set +# CONFIG_STM32L4_IO_CONFIG_Z is not set +# CONFIG_STM32L4_IO_CONFIG_A is not set + +# +# STM32L4 SRAM2 Options +# +# CONFIG_STM32L4_SRAM2_HEAP is not set +# CONFIG_STM32L4_SRAM2_INIT is not set + +# +# STM32L4 Peripherals +# + +# +# STM32L4 Peripheral Support +# +CONFIG_STM32L4_HAVE_ADC2=y +CONFIG_STM32L4_HAVE_ADC3=y +# CONFIG_STM32L4_HAVE_AES is not set +# CONFIG_STM32L4_HAVE_CAN2 is not set +CONFIG_STM32L4_HAVE_COMP=y +CONFIG_STM32L4_HAVE_DAC2=y +# CONFIG_STM32L4_HAVE_DCMI is not set +CONFIG_STM32L4_HAVE_DFSDM1=y +# CONFIG_STM32L4_HAVE_DMA2D is not set +CONFIG_STM32L4_HAVE_FSMC=y +# CONFIG_STM32L4_HAVE_HASH is not set +# CONFIG_STM32L4_HAVE_I2C4 is not set +# CONFIG_STM32L4_HAVE_LCD is not set +# CONFIG_STM32L4_HAVE_LTDC is not set +CONFIG_STM32L4_HAVE_LPTIM1=y +CONFIG_STM32L4_HAVE_LPTIM2=y +CONFIG_STM32L4_HAVE_OTGFS=y +CONFIG_STM32L4_HAVE_SAI1=y +CONFIG_STM32L4_HAVE_SAI2=y +CONFIG_STM32L4_HAVE_SDMMC1=y +CONFIG_STM32L4_HAVE_TIM3=y +CONFIG_STM32L4_HAVE_TIM4=y +CONFIG_STM32L4_HAVE_TIM5=y +CONFIG_STM32L4_HAVE_TIM7=y +CONFIG_STM32L4_HAVE_TIM8=y +CONFIG_STM32L4_HAVE_TIM17=y +# CONFIG_STM32L4_ADC is not set +# CONFIG_STM32L4_CAN is not set +# CONFIG_STM32L4_DAC is not set +# CONFIG_STM32L4_DMA is not set +# CONFIG_STM32L4_I2C is not set +# CONFIG_STM32L4_SAI is not set +# CONFIG_STM32L4_SPI is not set +CONFIG_STM32L4_USART=y +# CONFIG_STM32L4_LPTIM is not set + +# +# AHB1 Peripherals +# +# CONFIG_STM32L4_DMA1 is not set +# CONFIG_STM32L4_DMA2 is not set +# CONFIG_STM32L4_CRC is not set +# CONFIG_STM32L4_TSC is not set + +# +# AHB2 Peripherals +# +# CONFIG_STM32L4_OTGFS is not set +# CONFIG_STM32L4_ADC1 is not set +# CONFIG_STM32L4_ADC2 is not set +# CONFIG_STM32L4_ADC3 is not set +# CONFIG_STM32L4_RNG is not set + +# +# AHB3 Peripherals +# +# CONFIG_STM32L4_FSMC is not set +# CONFIG_STM32L4_QSPI is not set + +# +# APB1 Peripherals +# +# CONFIG_STM32L4_PWR is not set +# CONFIG_STM32L4_TIM2 is not set +# CONFIG_STM32L4_TIM3 is not set +# CONFIG_STM32L4_TIM4 is not set +# CONFIG_STM32L4_TIM5 is not set +# CONFIG_STM32L4_TIM6 is not set +# CONFIG_STM32L4_TIM7 is not set +# CONFIG_STM32L4_SPI2 is not set +# CONFIG_STM32L4_SPI3 is not set +# CONFIG_STM32L4_USART2 is not set +# CONFIG_STM32L4_USART3 is not set +CONFIG_STM32L4_UART4=y +# CONFIG_STM32L4_UART5 is not set +# CONFIG_STM32L4_I2C1 is not set +# CONFIG_STM32L4_I2C2 is not set +# CONFIG_STM32L4_I2C3 is not set +# CONFIG_STM32L4_CAN1 is not set +# CONFIG_STM32L4_DAC1 is not set +# CONFIG_STM32L4_DAC2 is not set +# CONFIG_STM32L4_OPAMP is not set +# CONFIG_STM32L4_LPTIM1 is not set +# CONFIG_STM32L4_LPUART1 is not set +# CONFIG_STM32L4_SWPMI is not set +# CONFIG_STM32L4_LPTIM2 is not set + +# +# APB2 Peripherals +# +CONFIG_STM32L4_SYSCFG=y +CONFIG_STM32L4_FIREWALL=y +# CONFIG_STM32L4_SDMMC1 is not set +# CONFIG_STM32L4_TIM1 is not set +# CONFIG_STM32L4_SPI1 is not set +# CONFIG_STM32L4_TIM8 is not set +# CONFIG_STM32L4_USART1 is not set +# CONFIG_STM32L4_TIM15 is not set +# CONFIG_STM32L4_TIM16 is not set +# CONFIG_STM32L4_TIM17 is not set +# CONFIG_STM32L4_COMP is not set +# CONFIG_STM32L4_SAI1 is not set +# CONFIG_STM32L4_SAI2 is not set +# CONFIG_STM32L4_DFSDM1 is not set + +# +# Other Peripherals +# +# CONFIG_STM32L4_BKPSRAM is not set +# CONFIG_STM32L4_IWDG is not set +# CONFIG_STM32L4_WWDG is not set +CONFIG_STM32L4_FLASH_PREFETCH=y +# CONFIG_STM32L4_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set +# CONFIG_ARCH_BOARD_STM32L4_CUSTOM_CLOCKCONFIG is not set +# CONFIG_STM32L4_SAI1PLL is not set +# CONFIG_STM32L4_SAI2PLL is not set + +# +# Timer Configuration +# +# CONFIG_STM32L4_ONESHOT is not set +# CONFIG_STM32L4_FREERUN is not set +# CONFIG_STM32L4_TIM3_CAP is not set +# CONFIG_STM32L4_TIM4_CAP is not set +# CONFIG_STM32L4_TIM5_CAP is not set +# CONFIG_STM32L4_TIM8_CAP is not set +CONFIG_STM32L4_HAVE_USART1=y +CONFIG_STM32L4_HAVE_USART2=y +CONFIG_STM32L4_HAVE_USART3=y +CONFIG_STM32L4_HAVE_UART4=y +CONFIG_STM32L4_HAVE_UART5=y + +# +# U[S]ART Configuration +# +# CONFIG_STM32L4_FLOWCONTROL_BROKEN is not set +# CONFIG_STM32L4_USART_BREAKS is not set +# CONFIG_ARCH_TOOLCHAIN_IAR is not set +CONFIG_ARCH_TOOLCHAIN_GNU=y + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +# CONFIG_ARCH_HAVE_MULTICPU is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +CONFIG_ARCH_HAVE_RESET=y +# CONFIG_ARCH_HAVE_RTC_SUBSECONDS is not set +# CONFIG_ARCH_USE_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set +# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=114688 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_B_L475E_IOT01A=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="b-l475e-iot01a" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y + +# +# Board-Specific Options +# +# CONFIG_BOARD_CRASHDUMP is not set +CONFIG_LIB_BOARDCTL=y +# CONFIG_BOARDCTL_RESET is not set +# CONFIG_BOARDCTL_UNIQUEID is not set +# CONFIG_BOARDCTL_TSCTEST is not set +# CONFIG_BOARDCTL_GRAPHICS is not set +# CONFIG_BOARDCTL_IOCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# +CONFIG_ARCH_HAVE_TICKLESS=y +# CONFIG_SCHED_TICKLESS is not set +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_ARCH_HAVE_TIMEKEEPING is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2011 +CONFIG_START_MONTH=12 +CONFIG_START_DAY=6 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=16 +CONFIG_WDOG_INTRESERVE=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_SPINLOCK is not set +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=31 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_PTHREAD_MUTEX_TYPES is not set +CONFIG_PTHREAD_MUTEX_ROBUST=y +# CONFIG_PTHREAD_MUTEX_UNSAFE is not set +# CONFIG_PTHREAD_MUTEX_BOTH is not set +CONFIG_NPTHREAD_KEYS=4 +# CONFIG_PTHREAD_CLEANUP is not set +# CONFIG_CANCELLATION_POINTS is not set + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_HPWORK is not set +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_URANDOM is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +CONFIG_ARCH_HAVE_I2CRESET=y +# CONFIG_I2C is not set +# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set +# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set +CONFIG_ARCH_HAVE_SPI_BITORDER=y +# CONFIG_SPI is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_ONESHOT is not set +# CONFIG_RTC is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_DEVPATH="/dev/watchdog0" +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set + +# +# IO Expander/GPIO Support +# +# CONFIG_IOEXPANDER is not set +# CONFIG_DEV_GPIO is not set + +# +# LCD Driver Support +# +# CONFIG_LCD is not set +# CONFIG_SLCD is not set + +# +# LED Support +# +# CONFIG_USERLED is not set +# CONFIG_RGBLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_NCP5623C is not set +# CONFIG_MMCSD is not set +# CONFIG_MODEM is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_SERIAL_REMOVABLE is not set +CONFIG_SERIAL_CONSOLE=y +# CONFIG_16550_UART is not set +# CONFIG_UART_SERIALDRIVER is not set +# CONFIG_UART0_SERIALDRIVER is not set +# CONFIG_UART1_SERIALDRIVER is not set +# CONFIG_UART2_SERIALDRIVER is not set +# CONFIG_UART3_SERIALDRIVER is not set +CONFIG_UART4_SERIALDRIVER=y +# CONFIG_UART5_SERIALDRIVER is not set +# CONFIG_UART6_SERIALDRIVER is not set +# CONFIG_UART7_SERIALDRIVER is not set +# CONFIG_UART8_SERIALDRIVER is not set +# CONFIG_SCI0_SERIALDRIVER is not set +# CONFIG_SCI1_SERIALDRIVER is not set +# CONFIG_USART0_SERIALDRIVER is not set +# CONFIG_USART1_SERIALDRIVER is not set +# CONFIG_USART2_SERIALDRIVER is not set +# CONFIG_USART3_SERIALDRIVER is not set +# CONFIG_USART4_SERIALDRIVER is not set +# CONFIG_USART5_SERIALDRIVER is not set +# CONFIG_USART6_SERIALDRIVER is not set +# CONFIG_USART7_SERIALDRIVER is not set +# CONFIG_USART8_SERIALDRIVER is not set +# CONFIG_OTHER_UART_SERIALDRIVER is not set +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_UART4_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART4 Configuration +# +CONFIG_UART4_RXBUFSIZE=256 +CONFIG_UART4_TXBUFSIZE=256 +CONFIG_UART4_BAUD=115200 +CONFIG_UART4_BITS=8 +CONFIG_UART4_PARITY=0 +CONFIG_UART4_2STOP=0 +# CONFIG_UART4_IFLOWCONTROL is not set +# CONFIG_UART4_OFLOWCONTROL is not set +# CONFIG_UART4_DMA is not set +# CONFIG_PSEUDOTERM is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_USBMISC is not set +# CONFIG_HAVE_USBTRACE is not set +# CONFIG_DRIVERS_WIRELESS is not set +# CONFIG_DRIVERS_CONTACTLESS is not set + +# +# System Logging +# +# CONFIG_ARCH_SYSLOG is not set +CONFIG_SYSLOG_WRITE=y +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_BUFFER is not set +# CONFIG_SYSLOG_INTBUFFER is not set +# CONFIG_SYSLOG_TIMESTAMP is not set +CONFIG_SYSLOG_SERIAL_CONSOLE=y +# CONFIG_SYSLOG_CHAR is not set +CONFIG_SYSLOG_CONSOLE=y +# CONFIG_SYSLOG_NONE is not set +# CONFIG_SYSLOG_FILE is not set +# CONFIG_SYSLOG_CHARDEV is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_PSEUDOFS_SOFTLINKS is not set +CONFIG_FS_READABLE=y +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +CONFIG_FS_PROCFS=y +# CONFIG_FS_PROCFS_REGISTER is not set + +# +# Exclude individual procfs entries +# +# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set +# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set +# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set +# CONFIG_FS_UNIONFS is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Common I/O Buffer Support +# +# CONFIG_MM_IOB is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Wireless Support +# +# CONFIG_WIRELESS is not set + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# + +# +# Standard C I/O +# +# CONFIG_STDIO_DISABLE_BUFFERING is not set +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_SCANSET is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_MEMCPY_VIK is not set +# CONFIG_LIBM is not set + +# +# Architecture-Specific Support +# +CONFIG_ARCH_LOWPUTC=y +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_LIBC_ARCH_MEMCPY is not set +# CONFIG_LIBC_ARCH_MEMCMP is not set +# CONFIG_LIBC_ARCH_MEMMOVE is not set +# CONFIG_LIBC_ARCH_MEMSET is not set +# CONFIG_LIBC_ARCH_STRCHR is not set +# CONFIG_LIBC_ARCH_STRCMP is not set +# CONFIG_LIBC_ARCH_STRCPY is not set +# CONFIG_LIBC_ARCH_STRNCPY is not set +# CONFIG_LIBC_ARCH_STRLEN is not set +# CONFIG_LIBC_ARCH_STRNLEN is not set +# CONFIG_LIBC_ARCH_ELF is not set +# CONFIG_ARMV7M_MEMCPY is not set + +# +# stdlib Options +# +CONFIG_LIB_RAND_ORDER=1 +CONFIG_LIB_HOMEDIR="/" + +# +# Program Execution Options +# +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 + +# +# errno Decode Support +# +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set + +# +# memcpy/memset Options +# +# CONFIG_MEMSET_OPTSPEED is not set +# CONFIG_LIBC_DLLFCN is not set +# CONFIG_LIBC_MODLIB is not set +# CONFIG_LIBC_WCHAR is not set +# CONFIG_LIBC_LOCALE is not set + +# +# Time/Time Zone Support +# +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_ARCH_HAVE_TLS=y + +# +# Thread Local Storage (TLS) +# +# CONFIG_TLS is not set + +# +# Network-Related Options +# +# CONFIG_LIBC_IPv4_ADDRCONV is not set +# CONFIG_LIBC_IPv6_ADDRCONV is not set +# CONFIG_LIBC_NETDB is not set + +# +# NETDB Support +# +# CONFIG_NETDB_HOSTFILE is not set +# CONFIG_LIBC_IOCTL_VARIADIC is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 + +# +# Non-standard Library Support +# +# CONFIG_LIB_CRC64_FAST is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set +# CONFIG_LIB_HEX2BIN is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +# CONFIG_CXX_NEWLONG is not set + +# +# LLVM C++ Library (libcxx) +# +# CONFIG_LIBCXX is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# NxWidgets/NxWM +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_CCTYPE is not set +# CONFIG_EXAMPLES_CHAT is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NSH_CXXINITIALIZE is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PCA9635 is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_RFID_READUID is not set +# CONFIG_EXAMPLES_RGBLED is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMP is not set +# CONFIG_EXAMPLES_STAT is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WEBSERVER is not set +# CONFIG_EXAMPLES_XBC_TEST is not set + +# +# File System Utilities +# +# CONFIG_FSUTILS_INIFILE is not set +# CONFIG_FSUTILS_PASSWD is not set + +# +# GPS Utilities +# +# CONFIG_GPSUTILS_MINMEA_LIB is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_BAS is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set +# CONFIG_INTERPRETERS_MINIBASIC is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_ESP8266 is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +# CONFIG_NSH_MOTD is not set + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_BASENAME is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_DIRNAME is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_IFUPDOWN is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_PRINTF=y +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TIME is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_TELNETD is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +# CONFIG_NSH_CMDOPT_DD_STATS is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +# CONFIG_NSH_CMDOPT_HEXDUMP is not set +CONFIG_NSH_PROC_MOUNTPOINT="/proc" +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +CONFIG_NSH_ARCHINIT=y +# CONFIG_NSH_LOGIN is not set +# CONFIG_NSH_CONSOLE_LOGIN is not set + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set +CONFIG_HAVE_CXXINITIALIZE=y + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_READLINE_TABCOMPLETION is not set +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_SYSTEM is not set +# CONFIG_SYSTEM_TEE is not set +# CONFIG_SYSTEM_UBLOXMODEM is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set + +# +# Wireless Libraries and NSH Add-Ons +# + +# +# IEEE 802.15.4 applications +# +# CONFIG_IEEE802154_LIBMAC is not set +# CONFIG_IEEE802154_LIBUTILS is not set +# CONFIG_IEEE802154_I8SAK is not set diff --git a/configs/b-l475e-iot01a/scripts/flash.ld b/configs/b-l475e-iot01a/scripts/flash.ld new file mode 100644 index 0000000000..1812d08126 --- /dev/null +++ b/configs/b-l475e-iot01a/scripts/flash.ld @@ -0,0 +1,120 @@ +/**************************************************************************** + * configs/b-l475e-iot01a/scripts/flash.ld + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The STM32L475VG has 1024Kb of FLASH beginning at address 0x0800:0000 and + * 128Kb of SRAM. SRAM is split up into three blocks: + * + * 1) 96Kb of SRAM beginning at address 0x2000:0000 + * 2) 32Kb of SRAM beginning at address 0x2001:8000 + * + * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000 + * where the code expects to begin execution by jumping to the entry point in + * the 0x0800:0000 address + * range. + */ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 128K +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/b-l475e-iot01a/src/.gitignore b/configs/b-l475e-iot01a/src/.gitignore new file mode 100644 index 0000000000..726d936e1e --- /dev/null +++ b/configs/b-l475e-iot01a/src/.gitignore @@ -0,0 +1,2 @@ +/.depend +/Make.dep diff --git a/configs/b-l475e-iot01a/src/Makefile b/configs/b-l475e-iot01a/src/Makefile new file mode 100644 index 0000000000..1eb8cab4da --- /dev/null +++ b/configs/b-l475e-iot01a/src/Makefile @@ -0,0 +1,50 @@ +############################################################################ +# configs/b-l475e-iot01a/src/Makefile +# +# Copyright (C) 2017 Gregory Nutt. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +ASRCS = +CSRCS = stm32_boot.c stm32_bringup.c + +ifeq ($(CONFIG_LIB_BOARDCTL),y) +CSRCS += stm32_appinit.c +endif + +ifeq ($(CONFIG_ARCH_LEDS),y) +CSRCS += stm32_autoleds.c +else +CSRCS += stm32_userleds.c +endif + +include $(TOPDIR)/configs/Board.mk diff --git a/configs/b-l475e-iot01a/src/b-l475e-iot01a.h b/configs/b-l475e-iot01a/src/b-l475e-iot01a.h new file mode 100644 index 0000000000..390becb9df --- /dev/null +++ b/configs/b-l475e-iot01a/src/b-l475e-iot01a.h @@ -0,0 +1,88 @@ +/**************************************************************************** + * configs/b-l475e-iot01a/src/b-l475e-iot01a.h + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * Author: Simon Piriou + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#ifndef __CONFIGS_B_L475E_IOT01A_SRC_B_L475E_IOT01A_H +#define __CONFIGS_B_L475E_IOT01A_SRC_B_L475E_IOT01A_H + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include +#include + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* LEDs */ + +#define GPIO_LED1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN5) +#define GPIO_LED2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\ + GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN14) + +/**************************************************************************** + * Public Types + ****************************************************************************/ + +/**************************************************************************** + * Public data + ****************************************************************************/ + +#ifndef __ASSEMBLY__ + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_bringup + * + * Description: + * Called either by board_intialize() if CONFIG_BOARD_INITIALIZE or by + * board_app_initialize if CONFIG_LIB_BOARDCTL is selected. This function + * initializes and configures all on-board features appropriate for the + * selected configuration. + * + ****************************************************************************/ + +#if defined(CONFIG_LIB_BOARDCTL) || defined(CONFIG_BOARD_INITIALIZE) +int stm32l4_bringup(void); +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_B_L475E_IOT01A_SRC_B_L475E_IOT01A_H */ diff --git a/configs/b-l475e-iot01a/src/stm32_appinit.c b/configs/b-l475e-iot01a/src/stm32_appinit.c new file mode 100644 index 0000000000..cbb2f01043 --- /dev/null +++ b/configs/b-l475e-iot01a/src/stm32_appinit.c @@ -0,0 +1,90 @@ +/**************************************************************************** + * config/b-l475e-iot01a/src/stm32_appinit.c + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include + +#include + +#include "b-l475e-iot01a.h" + +#ifdef CONFIG_LIB_BOARDCTL + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_app_initialize + * + * Description: + * Perform application specific initialization. This function is never + * called directly from application code, but only indirectly via the + * (non-standard) boardctl() interface using the command BOARDIOC_INIT. + * + * Input Parameters: + * arg - The boardctl() argument is passed to the board_app_initialize() + * implementation without modification. The argument has no + * meaning to NuttX; the meaning of the argument is a contract + * between the board-specific initalization logic and the + * matching application logic. The value cold be such things as a + * mode enumeration value, a set of DIP switch switch settings, a + * pointer to configuration data read from a file or serial FLASH, + * or whatever you would like to do with it. Every implementation + * should accept zero/NULL as a default configuration. + * + * Returned Value: + * Zero (OK) is returned on success; a negated errno value is returned on + * any failure to indicate the nature of the failure. + * + ****************************************************************************/ + +int board_app_initialize(uintptr_t arg) +{ +#ifndef CONFIG_BOARD_INITIALIZE + /* Perform board initialization */ + + return stm32l4_bringup(); +#else + return OK; +#endif +} + +#endif /* CONFIG_LIB_BOARDCTL */ diff --git a/configs/b-l475e-iot01a/src/stm32_autoleds.c b/configs/b-l475e-iot01a/src/stm32_autoleds.c new file mode 100644 index 0000000000..ecf8b5f713 --- /dev/null +++ b/configs/b-l475e-iot01a/src/stm32_autoleds.c @@ -0,0 +1,116 @@ +/**************************************************************************** + * configs/b-l475e-iot01a/src/stm32_autoleds.c + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* LEDs + * + * A single LED is available driven by PA13. + * + * These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is + * defined. In that case, the usage by the board port is defined in + * include/board.h and src/sam_autoleds.c. The LEDs are used to encode + * OS-related events as follows: + * + * ------------------- ----------------------- ------ + * SYMBOL Meaning LED + * ------------------- ----------------------- ------ + * LED_STARTED NuttX has been started OFF + * LED_HEAPALLOCATE Heap has been allocated OFF + * LED_IRQSENABLED Interrupts enabled OFF + * LED_STACKCREATED Idle stack created ON + * LED_INIRQ In an interrupt N/C + * LED_SIGNAL In a signal handler N/C + * LED_ASSERTION An assertion failed N/C + * LED_PANIC The system has crashed FLASH + * + * Thus is LED is statically on, NuttX has successfully booted and is, + * apparently, running normally. If LED is flashing at approximately + * 2Hz, then a fatal error has been detected and the system has halted. + */ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include + +#include +#include + +#include "stm32l4_gpio.h" +#include "b-l475e-iot01a.h" + +#ifdef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_autoled_initialize + ****************************************************************************/ + +void board_autoled_initialize(void) +{ + /* Configure LED gpio as output */ + + stm32l4_configgpio(GPIO_LED2); +} + +/**************************************************************************** + * Name: board_autoled_on + ****************************************************************************/ + +void board_autoled_on(int led) +{ + if (led == 1 || led == 3) + { + stm32l4_gpiowrite(GPIO_LED2, true); + } +} + +/**************************************************************************** + * Name: board_autoled_off + ****************************************************************************/ + +void board_autoled_off(int led) +{ + if (led == 3) + { + stm32l4_gpiowrite(GPIO_LED2, false); + } +} + +#endif /* CONFIG_ARCH_LEDS */ diff --git a/configs/b-l475e-iot01a/src/stm32_boot.c b/configs/b-l475e-iot01a/src/stm32_boot.c new file mode 100644 index 0000000000..a4a1b3cf58 --- /dev/null +++ b/configs/b-l475e-iot01a/src/stm32_boot.c @@ -0,0 +1,91 @@ +/************************************************************************************ + * configs/b-l475e-iot01a/src/stm32_boot.c + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * Author: Simon Piriou + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include + +#include "up_arch.h" +#include "b-l475e-iot01a.h" + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This entry point + * is called early in the initialization -- after all memory has been configured + * and mapped but before any devices have been initialized. + * + ************************************************************************************/ + +void stm32l4_boardinitialize(void) +{ +#ifdef CONFIG_ARCH_LEDS + /* Configure on-board LEDs if LED support has been selected. */ + + board_autoled_initialize(); +#endif +} + +/**************************************************************************** + * Name: board_initialize + * + * Description: + * If CONFIG_BOARD_INITIALIZE is selected, then an additional + * initialization call will be performed in the boot-up sequence to a + * function called board_initialize(). board_initialize() will be + * called immediately after up_intitialize() is called and just before the + * initial application is started. This additional initialization phase + * may be used, for example, to initialize board-specific device drivers. + * + ****************************************************************************/ + +#ifdef CONFIG_BOARD_INITIALIZE +void board_initialize(void) +{ + /* Perform board initialization */ + + (void)stm32_bringup(); +} +#endif /* CONFIG_BOARD_INITIALIZE */ diff --git a/configs/b-l475e-iot01a/src/stm32_bringup.c b/configs/b-l475e-iot01a/src/stm32_bringup.c new file mode 100644 index 0000000000..55bb4d41b3 --- /dev/null +++ b/configs/b-l475e-iot01a/src/stm32_bringup.c @@ -0,0 +1,101 @@ +/**************************************************************************** + * config/b-l475e-iot01a/src/stm32_bringup.c + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * Author: Simon Piriou + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include + +#include +#include +#include + +#include +#include +#include + +#include + +#include "b-l475e-iot01a.h" + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32l4_bringup + * + * Description: + * Called either by board_intialize() if CONFIG_BOARD_INITIALIZE or by + * board_app_initialize if CONFIG_LIB_BOARDCTL is selected. This function + * initializes and configures all on-board features appropriate for the + * selected configuration. + * + ****************************************************************************/ + +int stm32l4_bringup(void) +{ + int ret = OK; + +#ifdef CONFIG_FS_PROCFS + /* Mount the procfs file system */ + + ret = mount(NULL, "/proc", "procfs", 0, NULL); + if (ret < 0) + { + syslog(LOG_ERR, "ERROR: Failed to mount procfs at /proc: %d\n", ret); + } +#endif + +#if defined(CONFIG_USERLED) && !defined(CONFIG_ARCH_LEDS) +#ifdef CONFIG_USERLED_LOWER + /* Register the LED driver */ + + ret = userled_lower_initialize("/dev/userleds"); + if (ret != OK) + { + syslog(LOG_ERR, "ERROR: userled_lower_initialize() failed: %d\n", ret); + return ret; + } +#else + /* Enable USER LED support for some other purpose */ + + board_userled_initialize(); +#endif /* CONFIG_USERLED_LOWER */ +#endif /* CONFIG_USERLED && !CONFIG_ARCH_LEDS */ + + return ret; +} diff --git a/configs/b-l475e-iot01a/src/stm32_userleds.c b/configs/b-l475e-iot01a/src/stm32_userleds.c new file mode 100644 index 0000000000..c509015b36 --- /dev/null +++ b/configs/b-l475e-iot01a/src/stm32_userleds.c @@ -0,0 +1,92 @@ +/**************************************************************************** + * configs/b-l475e-iot01a/src/stm32_userleds.c + * + * Copyright (C) 2017 Gregory Nutt. All rights reserved. + * Author: Simon Piriou + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include +#include + +#include +#include "b-l475e-iot01a.h" + +#include "stm32l4_gpio.h" + +#ifndef CONFIG_ARCH_LEDS + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: board_userled_initialize + ****************************************************************************/ + +void board_userled_initialize(void) +{ + /* Configure LED gpio as output */ + + stm32l4_configgpio(GPIO_LED1); + stm32l4_configgpio(GPIO_LED2); +} + +/**************************************************************************** + * Name: board_userled + ****************************************************************************/ + +void board_userled(int led, bool ledon) +{ + if (led == BOARD_LED1) + { + stm32l4_gpiowrite(GPIO_LED1, ledon); + } + else if (led == BOARD_LED2) + { + stm32l4_gpiowrite(GPIO_LED2, ledon); + } +} + +/**************************************************************************** + * Name: board_userled_all + ****************************************************************************/ + +void board_userled_all(uint8_t ledset) +{ + stm32l4_gpiowrite(GPIO_LED1, !!(ledset & BOARD_LED1_BIT)); + stm32l4_gpiowrite(GPIO_LED2, !!(ledset & BOARD_LED2_BIT)); +} + +#endif /* !CONFIG_ARCH_LEDS */ diff --git a/configs/sim/README.txt b/configs/sim/README.txt index 37c064be01..20f76fbf29 100644 --- a/configs/sim/README.txt +++ b/configs/sim/README.txt @@ -504,6 +504,7 @@ ipforward +CONFIG_NET_ICMPv6=y +CONFIG_NET_ICMPv6_PING=y +CONFIG_NET_ETHERNET=y + +CONFIG_NET_IPFORWARD_BROADCAST=y Additional required settings will also be selected when you manually select the above via 'make menuconfig'.