sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs/mikroe-stm32f4: Add new configurations plus support for the MIO283QT2 display from Ken Pettit

Browse Source
This commit is contained in:
Gregory Nutt 2013-05-07 14:34:09 -06:00
parent 3747e8f899
commit 9a25b51c8f
20 changed files with 4547 additions and 328 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

95
configs/mikroe-stm32f4/README.txt
View File

@ -405,6 +405,16 @@ There are two version of the FPU support built into the STM32 port.
+ENTRY(__start) /* Treat __start as the anchor for dead code stripping */
+EXTERN(_vectors) /* Force the vectors to be included in the output */
MIO283QT-2
==========
The Mikroe-SMT32F4 board as an on-board MIO283QT-2 TFT LCD that can be
configured and used. This is a 320x240 resolution display with color
capability to 262K colors, though the mio283qt-2 driver in NuttX only
supports 16-bit color depth, or 65K colors. Changes to both the
mio283qt-2 driver and the driver interface layer would need to be made
to support 24 BPP mode.
CFLAGS
------
@ -738,6 +748,54 @@ instead of configure.sh:
Where <subdir> is one of the following:
fulldemo
--------
This is an example that includes an NSH shell over USB that also
enables all features of the Mikroe-STM32F4 board including the LCD,
on-board 1M Flash with SMART filesystem, Aux RS-232 serial port on the
expansion header, etc. A couple of the NX graphics commands are made
available via the NSH prompt for performing LCD demonstrations, and the
nximage example is used as a splash-screen at startup.
nsh
---
This is an NSH example that uses USART2 as the console. Note that
the Mikroe-STM32F4 board doesn't actually have onboard line drivers
or a connector for USART2, but it does route the USART2 signals to
the expansion header. To use this demo, you would need to connect
an external 3.3V RS-232 line driver to the USART's I/O lines on the
expansion header.
NOTE: This demo doesn't quite work yet. I can get output to the
USART, but so far, I have not gotten nsh to actually come up.
nx
--
An example using the NuttX graphics system (NX). This example
focuses on general window controls, movement, mouse and keyboard
input.
CONFIG_LCD_LANDSCAPE=y : 320x240 landscape orientation
CONFIG_LCD_MIO283QT2
nxlines:
------
An example using the NuttX graphics system (NX). This example focuses on
placing lines on the background in various orientations using the
on-board TFT LCD.
CONFIG_LCD_LANDSCAPE=y : 320x240 landscape orientation
CONFIG_LCD_MIO283QT2
nxtext:
------
Another example using the NuttX graphics system (NX). This
example focuses on placing text on the background while pop-up
windows occur. Text should continue to update normally with
or without the popup windows present.
usbnsh:
-------
@ -810,40 +868,3 @@ Where <subdir> is one of the following:
CONFIG_PL2303=y : The Prolifics PL2303 emulation is enabled
CONFIG_PL2303_CONSOLE=y : The PL2303 serial device is the console
winbuild:
--------
This is a version of the apps/example/ostest, but configure to build natively
in the Windows CMD shell.
NOTES:
1. The beginnings of a Windows native build are in place but still not full
usable as of this writing. The windows native build logic is currently
separate and must be started by:
make -f Makefile.win
This build:
- Uses all Windows style paths
- Uses primarily Windows batch commands from cmd.exe, with
- A few extensions from GNUWin32 (or MSYS is you prefer)
In this build, you cannot use a Cygwin or MSYS shell. Rather the build must
be performed in a Windows console. Here is a better shell than than the
standard issue, CMD.exe shell: ConEmu which can be downloaded from:
http://code.google.com/p/conemu-maximus5/
CONFIG_HOST_WINDOWS=y : Windows
CONFIG_WINDOWS_NATIVE=y : Native Windows environment
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
Build Tools. The build still relies on some Unix-like commands. I use
the GNUWin32 tools that can be downloaded from http://gnuwin32.sourceforge.net/.
The MSYS tools are probably also a option but are likely lower performance
since they are based on Cygwin 1.3.
Host Compiler: I use the MingGW compiler which can be downloaded from
http://www.mingw.org/. If you are using GNUWin32, then it is recommended
the you not install the optional MSYS components as there may be conflicts.

111
configs/mikroe-stm32f4/fulldemo/Make.defs Normal file
View File

@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

916
configs/mikroe-stm32f4/fulldemo/defconfig Normal file
View File

@ -0,0 +1,916 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
CONFIG_DEBUG_SYMBOLS=y
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM4=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_FPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
# CONFIG_SERIAL_TERMIOS is not set
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
CONFIG_ARCH_CHIP_STM32F407VG=y
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
CONFIG_STM32_STM32F40XX=y
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
# CONFIG_STM32_ADC1 is not set
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
# CONFIG_STM32_BKPSRAM is not set
# CONFIG_STM32_CAN1 is not set
# CONFIG_STM32_CAN2 is not set
# CONFIG_STM32_CCMDATARAM is not set
# CONFIG_STM32_CRC is not set
# CONFIG_STM32_CRYP is not set
# CONFIG_STM32_DMA1 is not set
# CONFIG_STM32_DMA2 is not set
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_DCMI is not set
# CONFIG_STM32_ETHMAC is not set
# CONFIG_STM32_FSMC is not set
# CONFIG_STM32_HASH is not set
# CONFIG_STM32_I2C1 is not set
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_I2C3 is not set
# CONFIG_STM32_IWDG is not set
CONFIG_STM32_OTGFS=y
# CONFIG_STM32_OTGHS is not set
CONFIG_STM32_PWR=y
CONFIG_STM32_RNG=y
# CONFIG_STM32_SDIO is not set
# CONFIG_STM32_SPI1 is not set
CONFIG_STM32_SPI2=y
CONFIG_STM32_SPI3=y
CONFIG_STM32_SYSCFG=y
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
# CONFIG_STM32_TIM3 is not set
# CONFIG_STM32_TIM4 is not set
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
# CONFIG_STM32_TIM9 is not set
# CONFIG_STM32_TIM10 is not set
# CONFIG_STM32_TIM11 is not set
# CONFIG_STM32_TIM12 is not set
# CONFIG_STM32_TIM13 is not set
# CONFIG_STM32_TIM14 is not set
# CONFIG_STM32_USART1 is not set
CONFIG_STM32_USART2=y
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
# CONFIG_STM32_USART6 is not set
# CONFIG_STM32_WWDG is not set
CONFIG_STM32_SPI=y
#
# Alternate Pin Mapping
#
# CONFIG_STM32_FLASH_PREFETCH is not set
# CONFIG_STM32_JTAG_DISABLE is not set
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
CONFIG_STM32_USART=y
#
# U[S]ART Configuration
#
# CONFIG_USART2_RS485 is not set
# CONFIG_STM32_USART_SINGLEWIRE is not set
#
# SPI Configuration
#
# CONFIG_STM32_SPI_INTERRUPTS is not set
# CONFIG_STM32_SPI_DMA is not set
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=114688
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
# CONFIG_ARCH_BOARD_STM32F4_DISCOVERY is not set
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="mikroe-stm32f4"
#
# Common Board Options
#
CONFIG_NSH_MMCSDMINOR=0
CONFIG_NSH_MMCSDSLOTNO=0
CONFIG_NSH_MMCSDSPIPORTNO=0
#
# Board-Specific Options
#
CONFIG_MIKROE_FLASH=y
CONFIG_MIKROE_FLASH_MINOR=0
CONFIG_MIKROE_FLASH_PART=y
CONFIG_MIKROE_FLASH_PART_LIST="256,768"
# CONFIG_MIKROE_RAMMTD is not set
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=1
CONFIG_START_DAY=27
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
CONFIG_DEV_ZERO=y
CONFIG_ARCH_HAVE_RNG=y
CONFIG_DEV_RANDOM=y
CONFIG_LOOP=y
CONFIG_RAMDISK=y
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
CONFIG_ARCH_HAVE_I2CRESET=y
CONFIG_SPI=y
# CONFIG_SPI_OWNBUS is not set
CONFIG_SPI_EXCHANGE=y
# CONFIG_SPI_CMDDATA is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
CONFIG_LCD=y
# CONFIG_LCD_NOGETRUN is not set
CONFIG_LCD_MAXCONTRAST=63
CONFIG_LCD_MAXPOWER=1
# CONFIG_LCD_P14201 is not set
# CONFIG_LCD_NOKIA6100 is not set
CONFIG_LCD_MIO283QT2=y
# CONFIG_LCD_UG9664HSWAG01 is not set
# CONFIG_LCD_ST7567 is not set
# CONFIG_LCD_UG2864AMBAG01 is not set
# CONFIG_LCD_SSD1289 is not set
CONFIG_LCD_LANDSCAPE=y
# CONFIG_LCD_PORTRAIT is not set
# CONFIG_LCD_RPORTRAIT is not set
# CONFIG_LCD_RLANDSCAPE is not set
CONFIG_MMCSD=y
CONFIG_MMCSD_NSLOTS=1
# CONFIG_MMCSD_READONLY is not set
# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
CONFIG_MMCSD_MMCSUPPORT=y
CONFIG_MMCSD_HAVECARDDETECT=y
CONFIG_MMCSD_SPI=y
CONFIG_MMCSD_SPICLOCK=20000000
# CONFIG_MMCSD_SDIO is not set
CONFIG_MTD=y
#
# MTD Configuration
#
CONFIG_MTD_PARTITION=y
CONFIG_MTD_BYTE_WRITE=y
#
# MTD Device Drivers
#
CONFIG_RAMMTD=y
CONFIG_RAMMTD_BLOCKSIZE=512
CONFIG_RAMMTD_ERASESIZE=4096
CONFIG_RAMMTD_ERASESTATE=0xff
# CONFIG_RAMMTD_FLASHSIM is not set
# CONFIG_MTD_AT24XX is not set
# CONFIG_MTD_AT45DB is not set
CONFIG_MTD_M25P=y
CONFIG_M25P_SPIMODE=0
CONFIG_M25P_MANUFACTURER=0x1C
CONFIG_M25P_MEMORY_TYPE=0x31
CONFIG_M25P_SUBSECTOR_ERASE=y
CONFIG_MTD_SMART=y
CONFIG_MTD_SMART_SECTOR_SIZE=512
# CONFIG_MTD_RAMTRON is not set
# CONFIG_MTD_SST25 is not set
# CONFIG_MTD_SST39FV is not set
# CONFIG_MTD_W25 is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
CONFIG_SERIAL_REMOVABLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_USART2=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
# CONFIG_USART2_SERIAL_CONSOLE is not set
CONFIG_NO_SERIAL_CONSOLE=y
#
# USART2 Configuration
#
CONFIG_USART2_RXBUFSIZE=256
CONFIG_USART2_TXBUFSIZE=256
CONFIG_USART2_BAUD=115200
CONFIG_USART2_BITS=8
CONFIG_USART2_PARITY=0
CONFIG_USART2_2STOP=0
CONFIG_USBDEV=y
#
# USB Device Controller Driver Options
#
# CONFIG_USBDEV_ISOCHRONOUS is not set
# CONFIG_USBDEV_DUALSPEED is not set
CONFIG_USBDEV_SELFPOWERED=y
# CONFIG_USBDEV_BUSPOWERED is not set
CONFIG_USBDEV_MAXPOWER=100
# CONFIG_USBDEV_DMA is not set
# CONFIG_USBDEV_TRACE is not set
#
# USB Device Class Driver Options
#
# CONFIG_USBDEV_COMPOSITE is not set
# CONFIG_PL2303 is not set
CONFIG_CDCACM=y
CONFIG_CDCACM_CONSOLE=y
CONFIG_CDCACM_EP0MAXPACKET=64
CONFIG_CDCACM_EPINTIN=1
CONFIG_CDCACM_EPINTIN_FSSIZE=64
CONFIG_CDCACM_EPINTIN_HSSIZE=64
CONFIG_CDCACM_EPBULKOUT=3
CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
CONFIG_CDCACM_EPBULKIN=2
CONFIG_CDCACM_EPBULKIN_FSSIZE=64
CONFIG_CDCACM_EPBULKIN_HSSIZE=512
CONFIG_CDCACM_NWRREQS=4
CONFIG_CDCACM_NRDREQS=4
CONFIG_CDCACM_RXBUFSIZE=256
CONFIG_CDCACM_TXBUFSIZE=256
CONFIG_CDCACM_VENDORID=0x0525
CONFIG_CDCACM_PRODUCTID=0xa4a7
CONFIG_CDCACM_VENDORSTR="NuttX"
CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial"
# CONFIG_USBMSC is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
CONFIG_FS_FAT=y
# CONFIG_FAT_LCNAMES is not set
# CONFIG_FAT_LFN is not set
# CONFIG_FS_FATTIME is not set
# CONFIG_FAT_DMAMEMORY is not set
# CONFIG_FS_NXFFS is not set
CONFIG_FS_ROMFS=y
CONFIG_FS_SMARTFS=y
CONFIG_SMARTFS_ERASEDSTATE=0xff
CONFIG_SMARTFS_MAXNAMLEN=16
# CONFIG_SMARTFS_MULTI_ROOT_DIRS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
CONFIG_SYSLOG=y
CONFIG_SYSLOG_CHAR=y
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
#
# Graphics Support
#
CONFIG_NX=y
CONFIG_NX_LCDDRIVER=y
CONFIG_NX_NPLANES=1
# CONFIG_NX_WRITEONLY is not set
#
# Supported Pixel Depths
#
CONFIG_NX_DISABLE_1BPP=y
CONFIG_NX_DISABLE_2BPP=y
CONFIG_NX_DISABLE_4BPP=y
CONFIG_NX_DISABLE_8BPP=y
# CONFIG_NX_DISABLE_16BPP is not set
CONFIG_NX_DISABLE_24BPP=y
CONFIG_NX_DISABLE_32BPP=y
CONFIG_NX_PACKEDMSFIRST=y
#
# Input Devices
#
# CONFIG_NX_MOUSE is not set
# CONFIG_NX_KBD is not set
#
# Framed Window Borders
#
CONFIG_NXTK_BORDERWIDTH=3
CONFIG_NXTK_BORDERCOLOR1=0x8410
CONFIG_NXTK_BORDERCOLOR2=0x4208
CONFIG_NXTK_BORDERCOLOR3=0xc618
# CONFIG_NXTK_AUTORAISE is not set
#
# Font Selections
#
CONFIG_NXFONTS_CHARBITS=7
# CONFIG_NXFONT_MONO5X8 is not set
# CONFIG_NXFONT_SANS17X22 is not set
# CONFIG_NXFONT_SANS20X26 is not set
# CONFIG_NXFONT_SANS23X27 is not set
# CONFIG_NXFONT_SANS22X29 is not set
# CONFIG_NXFONT_SANS28X37 is not set
# CONFIG_NXFONT_SANS39X48 is not set
# CONFIG_NXFONT_SANS17X23B is not set
# CONFIG_NXFONT_SANS20X27B is not set
# CONFIG_NXFONT_SANS22X29B is not set
# CONFIG_NXFONT_SANS28X37B is not set
# CONFIG_NXFONT_SANS40X49B is not set
# CONFIG_NXFONT_SERIF22X29 is not set
# CONFIG_NXFONT_SERIF29X37 is not set
# CONFIG_NXFONT_SERIF38X48 is not set
CONFIG_NXFONT_SERIF22X28B=y
# CONFIG_NXFONT_SERIF27X38B is not set
# CONFIG_NXFONT_SERIF38X49B is not set
# CONFIG_NXCONSOLE is not set
#
# NX Multi-user only options
#
# CONFIG_NX_MULTIUSER is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=2
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
CONFIG_LIBC_STRERROR=y
# CONFIG_LIBC_STRERROR_SHORT is not set
CONFIG_LIBC_PERROR_STDOUT=y
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
# CONFIG_CXX_NEWLONG is not set
#
# uClibc++ Standard C++ Library
#
# CONFIG_UCLIBCXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CDCACM is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_CXXTEST is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MTDPART is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
CONFIG_EXAMPLES_NX=y
CONFIG_EXAMPLES_NX_BUILTIN=y
CONFIG_EXAMPLES_NX_VPLANE=0
CONFIG_EXAMPLES_NX_DEVNO=0
CONFIG_EXAMPLES_NX_DEFAULT_COLORS=y
CONFIG_EXAMPLES_NX_DEFAULT_FONT=y
CONFIG_EXAMPLES_NX_BPP=16
# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set
# CONFIG_EXAMPLES_NX_EXTERNINIT is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
CONFIG_EXAMPLES_NXIMAGE=y
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_FLASH_TEST is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
CONFIG_NSH_BUILTIN_APPS=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_KILL is not set
# CONFIG_NSH_DISABLE_LOSETUP is not set
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MKFIFO is not set
# CONFIG_NSH_DISABLE_MKRD is not set
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
#
# Configure Command Options
#
CONFIG_NSH_CMDOPT_DF_H=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_STRERROR=y
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_ROMFSETC is not set
CONFIG_NSH_CONSOLE=y
# CONFIG_NSH_USBCONSOLE is not set
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
CONFIG_NSH_ARCHINIT=y
#
# NxWidgets/NxWM
#
# CONFIG_NXWIDGETS is not set
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
CONFIG_SYSTEM_FLASH_ERASEALL=y
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor
#

77
configs/mikroe-stm32f4/fulldemo/setenv.sh Executable file
View File

@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

151
configs/mikroe-stm32f4/nsh/defconfig
View File

@ -8,14 +8,10 @@ CONFIG_NUTTX_NEWCONFIG=y
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
# CONFIG_HOST_LINUX is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
CONFIG_HOST_WINDOWS=y
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
# CONFIG_WINDOWS_NATIVE is not set
CONFIG_WINDOWS_CYGWIN=y
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
#
# Build Configuration
@ -93,13 +89,10 @@ CONFIG_ARCH_HAVE_MPU=y
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
# CONFIG_SERIAL_TERMIOS is not set
#
@ -178,11 +171,11 @@ CONFIG_STM32_STM32F40XX=y
# CONFIG_STM32_OTGFS is not set
# CONFIG_STM32_OTGHS is not set
CONFIG_STM32_PWR=y
# CONFIG_STM32_RNG is not set
CONFIG_STM32_RNG=y
# CONFIG_STM32_SDIO is not set
CONFIG_STM32_SPI1=y
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_SPI3 is not set
# CONFIG_STM32_SPI1 is not set
CONFIG_STM32_SPI2=y
CONFIG_STM32_SPI3=y
CONFIG_STM32_SYSCFG=y
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
@ -215,8 +208,9 @@ CONFIG_STM32_SPI=y
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
CONFIG_STM32_USART=y
@ -282,25 +276,26 @@ CONFIG_BOOT_RUNFROMFLASH=y
#
# Board Selection
#
CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
# CONFIG_ARCH_BOARD_STM32F4_DISCOVERY is not set
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="stm32f4discovery"
CONFIG_ARCH_BOARD="mikroe-stm32f4"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
# CONFIG_ARCH_IRQBUTTONS is not set
CONFIG_NSH_MMCSDMINOR=0
CONFIG_NSH_MMCSDSLOTNO=0
CONFIG_NSH_MMCSDSPIPORTNO=0
#
# Board-Specific Options
#
CONFIG_MIKROE_FLASH=y
CONFIG_MIKROE_FLASH_MINOR=0
CONFIG_MIKROE_FLASH_PART=y
CONFIG_MIKROE_FLASH_PART_LIST="256,768"
# CONFIG_MIKROE_RAMMTD is not set
#
# RTOS Features
@ -312,10 +307,10 @@ CONFIG_RR_INTERVAL=200
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2011
CONFIG_START_MONTH=12
CONFIG_START_DAY=6
CONFIG_DEV_CONSOLE=y
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=1
CONFIG_START_DAY=27
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
@ -326,13 +321,7 @@ CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
# CONFIG_DISABLE_OS_API is not set
#
# Signal Numbers
@ -360,7 +349,7 @@ CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
@ -370,9 +359,11 @@ CONFIG_PTHREAD_STACK_DEFAULT=2048
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
CONFIG_DEV_ZERO=y
CONFIG_ARCH_HAVE_RNG=y
CONFIG_DEV_RANDOM=y
CONFIG_LOOP=y
CONFIG_RAMDISK=y
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
@ -387,13 +378,48 @@ CONFIG_SPI_EXCHANGE=y
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
CONFIG_MMCSD=y
CONFIG_MMCSD_NSLOTS=1
# CONFIG_MMCSD_READONLY is not set
# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
CONFIG_MMCSD_MMCSUPPORT=y
CONFIG_MMCSD_HAVECARDDETECT=y
CONFIG_MMCSD_SPI=y
CONFIG_MMCSD_SPICLOCK=20000000
# CONFIG_MMCSD_SDIO is not set
CONFIG_MTD=y
#
# MTD Configuration
#
CONFIG_MTD_PARTITION=y
CONFIG_MTD_BYTE_WRITE=y
#
# MTD Device Drivers
#
CONFIG_RAMMTD=y
CONFIG_RAMMTD_BLOCKSIZE=512
CONFIG_RAMMTD_ERASESIZE=4096
CONFIG_RAMMTD_ERASESTATE=0xff
# CONFIG_RAMMTD_FLASHSIM is not set
# CONFIG_MTD_AT24XX is not set
# CONFIG_MTD_AT45DB is not set
CONFIG_MTD_M25P=y
CONFIG_M25P_SPIMODE=0
CONFIG_M25P_MANUFACTURER=0x1C
CONFIG_M25P_MEMORY_TYPE=0x31
CONFIG_M25P_SUBSECTOR_ERASE=y
CONFIG_MTD_SMART=y
CONFIG_MTD_SMART_SECTOR_SIZE=512
# CONFIG_MTD_RAMTRON is not set
# CONFIG_MTD_SST25 is not set
# CONFIG_MTD_SST39FV is not set
# CONFIG_MTD_W25 is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
@ -406,8 +432,8 @@ CONFIG_USART2_SERIAL_CONSOLE=y
#
# USART2 Configuration
#
CONFIG_USART2_RXBUFSIZE=128
CONFIG_USART2_TXBUFSIZE=128
CONFIG_USART2_RXBUFSIZE=256
CONFIG_USART2_TXBUFSIZE=256
CONFIG_USART2_BAUD=115200
CONFIG_USART2_BITS=8
CONFIG_USART2_PARITY=0
@ -439,17 +465,26 @@ CONFIG_USART2_2STOP=0
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_FAT is not set
CONFIG_FS_FAT=y
# CONFIG_FAT_LCNAMES is not set
# CONFIG_FAT_LFN is not set
# CONFIG_FS_FATTIME is not set
# CONFIG_FAT_DMAMEMORY is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
CONFIG_FS_ROMFS=y
CONFIG_FS_SMARTFS=y
CONFIG_SMARTFS_ERASEDSTATE=0xff
CONFIG_SMARTFS_MAXNAMLEN=16
# CONFIG_SMARTFS_MULTI_ROOT_DIRS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
CONFIG_SYSLOG=y
CONFIG_SYSLOG_CHAR=y
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
#
# Graphics Support
@ -497,8 +532,9 @@ CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_LIBC_STRERROR=y
# CONFIG_LIBC_STRERROR_SHORT is not set
CONFIG_LIBC_PERROR_STDOUT=y
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
@ -573,7 +609,9 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_FLASH_TEST is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
@ -674,20 +712,22 @@ CONFIG_NSH_BUILTIN_APPS=y
#
# Configure Command Options
#
# CONFIG_NSH_CMDOPT_DF_H is not set
CONFIG_NSH_CMDOPT_DF_H=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_STRERROR=y
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_ROMFSETC is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
# CONFIG_NSH_ARCHINIT is not set
CONFIG_NSH_ARCHINIT=y
#
# NxWidgets/NxWM
@ -714,6 +754,7 @@ CONFIG_NSH_CONSOLE=y
#
# FLASH Erase-all Command
#
CONFIG_SYSTEM_FLASH_ERASEALL=y
#
# readline()
@ -739,7 +780,7 @@ CONFIG_READLINE_ECHO=y
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor

111
configs/mikroe-stm32f4/nx/Make.defs Normal file
View File

@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

786
configs/mikroe-stm32f4/nx/defconfig Normal file
View File

@ -0,0 +1,786 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM4=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_FPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
CONFIG_ARCH_CHIP_STM32F407VG=y
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
CONFIG_STM32_STM32F40XX=y
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
# CONFIG_STM32_ADC1 is not set
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
# CONFIG_STM32_BKPSRAM is not set
# CONFIG_STM32_CAN1 is not set
# CONFIG_STM32_CAN2 is not set
# CONFIG_STM32_CCMDATARAM is not set
# CONFIG_STM32_CRC is not set
# CONFIG_STM32_CRYP is not set
# CONFIG_STM32_DMA1 is not set
# CONFIG_STM32_DMA2 is not set
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_DCMI is not set
# CONFIG_STM32_ETHMAC is not set
# CONFIG_STM32_FSMC is not set
# CONFIG_STM32_HASH is not set
# CONFIG_STM32_I2C1 is not set
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_I2C3 is not set
# CONFIG_STM32_IWDG is not set
# CONFIG_STM32_OTGFS is not set
# CONFIG_STM32_OTGHS is not set
CONFIG_STM32_PWR=y
# CONFIG_STM32_RNG is not set
# CONFIG_STM32_SDIO is not set
# CONFIG_STM32_SPI1 is not set
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_SPI3 is not set
CONFIG_STM32_SYSCFG=y
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
# CONFIG_STM32_TIM3 is not set
# CONFIG_STM32_TIM4 is not set
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
# CONFIG_STM32_TIM9 is not set
# CONFIG_STM32_TIM10 is not set
# CONFIG_STM32_TIM11 is not set
# CONFIG_STM32_TIM12 is not set
# CONFIG_STM32_TIM13 is not set
# CONFIG_STM32_TIM14 is not set
# CONFIG_STM32_USART1 is not set
# CONFIG_STM32_USART2 is not set
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
# CONFIG_STM32_USART6 is not set
# CONFIG_STM32_WWDG is not set
#
# Alternate Pin Mapping
#
# CONFIG_STM32_FLASH_PREFETCH is not set
# CONFIG_STM32_JTAG_DISABLE is not set
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=114688
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
# CONFIG_ARCH_BOARD_STM32F4_DISCOVERY is not set
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="mikroe-stm32f4"
#
# Common Board Options
#
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
# CONFIG_MIKROE_FLASH is not set
# CONFIG_MIKROE_RAMMTD is not set
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=1
CONFIG_START_DAY=27
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nx_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
# CONFIG_DEV_NULL is not set
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
CONFIG_ARCH_HAVE_I2CRESET=y
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
CONFIG_LCD=y
# CONFIG_LCD_NOGETRUN is not set
CONFIG_LCD_MAXCONTRAST=63
CONFIG_LCD_MAXPOWER=1
# CONFIG_LCD_P14201 is not set
# CONFIG_LCD_NOKIA6100 is not set
CONFIG_LCD_MIO283QT2=y
# CONFIG_LCD_UG9664HSWAG01 is not set
# CONFIG_LCD_ST7567 is not set
# CONFIG_LCD_UG2864AMBAG01 is not set
# CONFIG_LCD_SSD1289 is not set
CONFIG_LCD_LANDSCAPE=y
# CONFIG_LCD_PORTRAIT is not set
# CONFIG_LCD_RPORTRAIT is not set
# CONFIG_LCD_RLANDSCAPE is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERIAL is not set
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_FAT is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
CONFIG_SYSLOG=y
CONFIG_SYSLOG_CHAR=y
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
#
# Graphics Support
#
CONFIG_NX=y
CONFIG_NX_LCDDRIVER=y
CONFIG_NX_NPLANES=1
# CONFIG_NX_WRITEONLY is not set
#
# Supported Pixel Depths
#
CONFIG_NX_DISABLE_1BPP=y
CONFIG_NX_DISABLE_2BPP=y
CONFIG_NX_DISABLE_4BPP=y
CONFIG_NX_DISABLE_8BPP=y
# CONFIG_NX_DISABLE_16BPP is not set
CONFIG_NX_DISABLE_24BPP=y
CONFIG_NX_DISABLE_32BPP=y
CONFIG_NX_PACKEDMSFIRST=y
#
# Input Devices
#
# CONFIG_NX_MOUSE is not set
# CONFIG_NX_KBD is not set
#
# Framed Window Borders
#
CONFIG_NXTK_BORDERWIDTH=3
CONFIG_NXTK_BORDERCOLOR1=0x8410
CONFIG_NXTK_BORDERCOLOR2=0x4208
CONFIG_NXTK_BORDERCOLOR3=0xc618
# CONFIG_NXTK_AUTORAISE is not set
#
# Font Selections
#
CONFIG_NXFONTS_CHARBITS=7
# CONFIG_NXFONT_MONO5X8 is not set
# CONFIG_NXFONT_SANS17X22 is not set
# CONFIG_NXFONT_SANS20X26 is not set
# CONFIG_NXFONT_SANS23X27 is not set
# CONFIG_NXFONT_SANS22X29 is not set
# CONFIG_NXFONT_SANS28X37 is not set
# CONFIG_NXFONT_SANS39X48 is not set
# CONFIG_NXFONT_SANS17X23B is not set
# CONFIG_NXFONT_SANS20X27B is not set
# CONFIG_NXFONT_SANS22X29B is not set
# CONFIG_NXFONT_SANS28X37B is not set
# CONFIG_NXFONT_SANS40X49B is not set
# CONFIG_NXFONT_SERIF22X29 is not set
# CONFIG_NXFONT_SERIF29X37 is not set
# CONFIG_NXFONT_SERIF38X48 is not set
CONFIG_NXFONT_SERIF22X28B=y
# CONFIG_NXFONT_SERIF27X38B is not set
# CONFIG_NXFONT_SERIF38X49B is not set
# CONFIG_NXCONSOLE is not set
#
# NX Multi-user only options
#
# CONFIG_NX_MULTIUSER is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=2
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
CONFIG_LIBC_STRERROR=y
# CONFIG_LIBC_STRERROR_SHORT is not set
CONFIG_LIBC_PERROR_STDOUT=y
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
# CONFIG_CXX_NEWLONG is not set
#
# uClibc++ Standard C++ Library
#
# CONFIG_UCLIBCXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_CXXTEST is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
CONFIG_EXAMPLES_NX=y
# CONFIG_EXAMPLES_NX_BUILTIN is not set
CONFIG_EXAMPLES_NX_VPLANE=0
CONFIG_EXAMPLES_NX_DEVNO=0
CONFIG_EXAMPLES_NX_DEFAULT_COLORS=y
CONFIG_EXAMPLES_NX_DEFAULT_FONT=y
CONFIG_EXAMPLES_NX_BPP=16
# CONFIG_EXAMPLES_NX_RAWWINDOWS is not set
# CONFIG_EXAMPLES_NX_EXTERNINIT is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
CONFIG_NSH_BUILTIN_APPS=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_KILL is not set
# CONFIG_NSH_DISABLE_LOSETUP is not set
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MKFIFO is not set
# CONFIG_NSH_DISABLE_MKRD is not set
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
#
# Configure Command Options
#
CONFIG_NSH_CMDOPT_DF_H=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_STRERROR=y
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
CONFIG_NSH_ARCHINIT=y
#
# NxWidgets/NxWM
#
# CONFIG_NXWIDGETS is not set
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor
#

77
configs/mikroe-stm32f4/nx/setenv.sh Executable file
View File

@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

111
configs/mikroe-stm32f4/nxlines/Make.defs Normal file
View File

@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

786
configs/mikroe-stm32f4/nxlines/defconfig Normal file
View File

@ -0,0 +1,786 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM4=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_FPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
CONFIG_ARCH_CHIP_STM32F407VG=y
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
CONFIG_STM32_STM32F40XX=y
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
# CONFIG_STM32_ADC1 is not set
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
# CONFIG_STM32_BKPSRAM is not set
# CONFIG_STM32_CAN1 is not set
# CONFIG_STM32_CAN2 is not set
# CONFIG_STM32_CCMDATARAM is not set
# CONFIG_STM32_CRC is not set
# CONFIG_STM32_CRYP is not set
# CONFIG_STM32_DMA1 is not set
# CONFIG_STM32_DMA2 is not set
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_DCMI is not set
# CONFIG_STM32_ETHMAC is not set
# CONFIG_STM32_FSMC is not set
# CONFIG_STM32_HASH is not set
# CONFIG_STM32_I2C1 is not set
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_I2C3 is not set
# CONFIG_STM32_IWDG is not set
# CONFIG_STM32_OTGFS is not set
# CONFIG_STM32_OTGHS is not set
CONFIG_STM32_PWR=y
# CONFIG_STM32_RNG is not set
# CONFIG_STM32_SDIO is not set
# CONFIG_STM32_SPI1 is not set
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_SPI3 is not set
CONFIG_STM32_SYSCFG=y
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
# CONFIG_STM32_TIM3 is not set
# CONFIG_STM32_TIM4 is not set
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
# CONFIG_STM32_TIM9 is not set
# CONFIG_STM32_TIM10 is not set
# CONFIG_STM32_TIM11 is not set
# CONFIG_STM32_TIM12 is not set
# CONFIG_STM32_TIM13 is not set
# CONFIG_STM32_TIM14 is not set
# CONFIG_STM32_USART1 is not set
# CONFIG_STM32_USART2 is not set
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
# CONFIG_STM32_USART6 is not set
# CONFIG_STM32_WWDG is not set
#
# Alternate Pin Mapping
#
# CONFIG_STM32_FLASH_PREFETCH is not set
# CONFIG_STM32_JTAG_DISABLE is not set
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=114688
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
# CONFIG_ARCH_BOARD_STM32F4_DISCOVERY is not set
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="mikroe-stm32f4"
#
# Common Board Options
#
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
# CONFIG_MIKROE_FLASH is not set
# CONFIG_MIKROE_RAMMTD is not set
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=1
CONFIG_START_DAY=27
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nxlines_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
# CONFIG_DEV_NULL is not set
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
CONFIG_ARCH_HAVE_I2CRESET=y
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
CONFIG_LCD=y
CONFIG_LCD_NOGETRUN=y
CONFIG_LCD_MAXCONTRAST=63
CONFIG_LCD_MAXPOWER=1
# CONFIG_LCD_P14201 is not set
# CONFIG_LCD_NOKIA6100 is not set
CONFIG_LCD_MIO283QT2=y
# CONFIG_LCD_UG9664HSWAG01 is not set
# CONFIG_LCD_ST7567 is not set
# CONFIG_LCD_UG2864AMBAG01 is not set
# CONFIG_LCD_SSD1289 is not set
CONFIG_LCD_LANDSCAPE=y
# CONFIG_LCD_PORTRAIT is not set
# CONFIG_LCD_RPORTRAIT is not set
# CONFIG_LCD_RLANDSCAPE is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERIAL is not set
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_FAT is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
CONFIG_SYSLOG=y
CONFIG_SYSLOG_CHAR=y
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
#
# Graphics Support
#
CONFIG_NX=y
CONFIG_NX_LCDDRIVER=y
CONFIG_NX_NPLANES=1
# CONFIG_NX_WRITEONLY is not set
#
# Supported Pixel Depths
#
CONFIG_NX_DISABLE_1BPP=y
CONFIG_NX_DISABLE_2BPP=y
CONFIG_NX_DISABLE_4BPP=y
CONFIG_NX_DISABLE_8BPP=y
# CONFIG_NX_DISABLE_16BPP is not set
CONFIG_NX_DISABLE_24BPP=y
CONFIG_NX_DISABLE_32BPP=y
CONFIG_NX_PACKEDMSFIRST=y
#
# Input Devices
#
# CONFIG_NX_MOUSE is not set
# CONFIG_NX_KBD is not set
#
# Framed Window Borders
#
CONFIG_NXTK_BORDERWIDTH=3
CONFIG_NXTK_BORDERCOLOR1=0x8410
CONFIG_NXTK_BORDERCOLOR2=0x4208
CONFIG_NXTK_BORDERCOLOR3=0xc618
# CONFIG_NXTK_AUTORAISE is not set
#
# Font Selections
#
CONFIG_NXFONTS_CHARBITS=7
# CONFIG_NXFONT_MONO5X8 is not set
# CONFIG_NXFONT_SANS17X22 is not set
# CONFIG_NXFONT_SANS20X26 is not set
# CONFIG_NXFONT_SANS23X27 is not set
# CONFIG_NXFONT_SANS22X29 is not set
# CONFIG_NXFONT_SANS28X37 is not set
# CONFIG_NXFONT_SANS39X48 is not set
# CONFIG_NXFONT_SANS17X23B is not set
# CONFIG_NXFONT_SANS20X27B is not set
# CONFIG_NXFONT_SANS22X29B is not set
# CONFIG_NXFONT_SANS28X37B is not set
# CONFIG_NXFONT_SANS40X49B is not set
# CONFIG_NXFONT_SERIF22X29 is not set
# CONFIG_NXFONT_SERIF29X37 is not set
# CONFIG_NXFONT_SERIF38X48 is not set
CONFIG_NXFONT_SERIF22X28B=y
# CONFIG_NXFONT_SERIF27X38B is not set
# CONFIG_NXFONT_SERIF38X49B is not set
# CONFIG_NXCONSOLE is not set
#
# NX Multi-user only options
#
# CONFIG_NX_MULTIUSER is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=2
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
# CONFIG_CXX_NEWLONG is not set
#
# uClibc++ Standard C++ Library
#
# CONFIG_UCLIBCXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_CXXTEST is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
CONFIG_EXAMPLES_NXLINES=y
CONFIG_EXAMPLES_NXLINES_VPLANE=0
CONFIG_EXAMPLES_NXLINES_DEVNO=0
CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0
CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
CONFIG_EXAMPLES_NXLINES_LINECOLOR=0x861F
CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=16
CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xFFE0
CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0x87F0
CONFIG_EXAMPLES_NXLINES_BPP=16
# CONFIG_EXAMPLES_NXLINES_EXTERNINIT is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
CONFIG_NSH_BUILTIN_APPS=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_KILL is not set
# CONFIG_NSH_DISABLE_LOSETUP is not set
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MKFIFO is not set
# CONFIG_NSH_DISABLE_MKRD is not set
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
#
# Configure Command Options
#
CONFIG_NSH_CMDOPT_DF_H=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
CONFIG_NSH_ARCHINIT=y
#
# NxWidgets/NxWM
#
# CONFIG_NXWIDGETS is not set
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor
#

77
configs/mikroe-stm32f4/nxlines/setenv.sh Executable file
View File

@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

111
configs/mikroe-stm32f4/nxtext/Make.defs Normal file
View File

@ -0,0 +1,111 @@
############################################################################
# configs/mikroe-stm32f4/usbnsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

797
configs/mikroe-stm32f4/nxtext/defconfig Normal file
View File

@ -0,0 +1,797 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
CONFIG_DEBUG_SYMBOLS=y
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM4=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_FPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
CONFIG_ARCH_CHIP_STM32F407VG=y
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
CONFIG_STM32_STM32F40XX=y
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
# CONFIG_STM32_ADC1 is not set
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
# CONFIG_STM32_BKPSRAM is not set
# CONFIG_STM32_CAN1 is not set
# CONFIG_STM32_CAN2 is not set
# CONFIG_STM32_CCMDATARAM is not set
# CONFIG_STM32_CRC is not set
# CONFIG_STM32_CRYP is not set
# CONFIG_STM32_DMA1 is not set
# CONFIG_STM32_DMA2 is not set
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_DCMI is not set
# CONFIG_STM32_ETHMAC is not set
# CONFIG_STM32_FSMC is not set
# CONFIG_STM32_HASH is not set
# CONFIG_STM32_I2C1 is not set
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_I2C3 is not set
# CONFIG_STM32_IWDG is not set
# CONFIG_STM32_OTGFS is not set
# CONFIG_STM32_OTGHS is not set
CONFIG_STM32_PWR=y
# CONFIG_STM32_RNG is not set
# CONFIG_STM32_SDIO is not set
# CONFIG_STM32_SPI1 is not set
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_SPI3 is not set
CONFIG_STM32_SYSCFG=y
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
# CONFIG_STM32_TIM3 is not set
# CONFIG_STM32_TIM4 is not set
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
# CONFIG_STM32_TIM9 is not set
# CONFIG_STM32_TIM10 is not set
# CONFIG_STM32_TIM11 is not set
# CONFIG_STM32_TIM12 is not set
# CONFIG_STM32_TIM13 is not set
# CONFIG_STM32_TIM14 is not set
# CONFIG_STM32_USART1 is not set
# CONFIG_STM32_USART2 is not set
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
# CONFIG_STM32_USART6 is not set
# CONFIG_STM32_WWDG is not set
#
# Alternate Pin Mapping
#
# CONFIG_STM32_FLASH_PREFETCH is not set
# CONFIG_STM32_JTAG_DISABLE is not set
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=16717
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=114688
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
# CONFIG_ARCH_BOARD_STM32F4_DISCOVERY is not set
CONFIG_ARCH_BOARD_MIKROE_STM32F4=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="mikroe-stm32f4"
#
# Common Board Options
#
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
# CONFIG_MIKROE_FLASH is not set
# CONFIG_MIKROE_RAMMTD is not set
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=1
CONFIG_START_DAY=27
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nxtext_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=2048
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
# CONFIG_DEV_NULL is not set
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
CONFIG_ARCH_HAVE_I2CRESET=y
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
CONFIG_LCD=y
# CONFIG_LCD_NOGETRUN is not set
CONFIG_LCD_MAXCONTRAST=63
CONFIG_LCD_MAXPOWER=1
# CONFIG_LCD_P14201 is not set
# CONFIG_LCD_NOKIA6100 is not set
CONFIG_LCD_MIO283QT2=y
# CONFIG_LCD_UG9664HSWAG01 is not set
# CONFIG_LCD_ST7567 is not set
# CONFIG_LCD_UG2864AMBAG01 is not set
# CONFIG_LCD_SSD1289 is not set
CONFIG_LCD_LANDSCAPE=y
# CONFIG_LCD_PORTRAIT is not set
# CONFIG_LCD_RPORTRAIT is not set
# CONFIG_LCD_RLANDSCAPE is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERIAL is not set
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_FAT is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
CONFIG_SYSLOG=y
CONFIG_SYSLOG_CHAR=y
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
#
# Graphics Support
#
CONFIG_NX=y
CONFIG_NX_LCDDRIVER=y
CONFIG_NX_NPLANES=1
# CONFIG_NX_WRITEONLY is not set
#
# Supported Pixel Depths
#
CONFIG_NX_DISABLE_1BPP=y
CONFIG_NX_DISABLE_2BPP=y
CONFIG_NX_DISABLE_4BPP=y
CONFIG_NX_DISABLE_8BPP=y
# CONFIG_NX_DISABLE_16BPP is not set
CONFIG_NX_DISABLE_24BPP=y
CONFIG_NX_DISABLE_32BPP=y
CONFIG_NX_PACKEDMSFIRST=y
#
# Input Devices
#
# CONFIG_NX_MOUSE is not set
# CONFIG_NX_KBD is not set
#
# Framed Window Borders
#
CONFIG_NXTK_BORDERWIDTH=3
CONFIG_NXTK_BORDERCOLOR1=0x8410
CONFIG_NXTK_BORDERCOLOR2=0x4208
CONFIG_NXTK_BORDERCOLOR3=0xc618
# CONFIG_NXTK_AUTORAISE is not set
#
# Font Selections
#
CONFIG_NXFONTS_CHARBITS=7
# CONFIG_NXFONT_MONO5X8 is not set
# CONFIG_NXFONT_SANS17X22 is not set
# CONFIG_NXFONT_SANS20X26 is not set
# CONFIG_NXFONT_SANS23X27 is not set
# CONFIG_NXFONT_SANS22X29 is not set
# CONFIG_NXFONT_SANS28X37 is not set
# CONFIG_NXFONT_SANS39X48 is not set
# CONFIG_NXFONT_SANS17X23B is not set
# CONFIG_NXFONT_SANS20X27B is not set
# CONFIG_NXFONT_SANS22X29B is not set
# CONFIG_NXFONT_SANS28X37B is not set
# CONFIG_NXFONT_SANS40X49B is not set
# CONFIG_NXFONT_SERIF22X29 is not set
# CONFIG_NXFONT_SERIF29X37 is not set
# CONFIG_NXFONT_SERIF38X48 is not set
CONFIG_NXFONT_SERIF22X28B=y
# CONFIG_NXFONT_SERIF27X38B is not set
# CONFIG_NXFONT_SERIF38X49B is not set
# CONFIG_NXCONSOLE is not set
#
# NX Multi-user only options
#
# CONFIG_NX_MULTIUSER is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=2
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
# CONFIG_CXX_NEWLONG is not set
#
# uClibc++ Standard C++ Library
#
# CONFIG_UCLIBCXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_CXXTEST is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
CONFIG_EXAMPLES_NXTEXT=y
#
# Basic Configuration of the example
#
# CONFIG_EXAMPLES_NXTEXT_BUILTIN is not set
CONFIG_EXAMPLES_NXTEXT_VPLANE=0
CONFIG_EXAMPLES_NXTEXT_DEVNO=0
CONFIG_EXAMPLES_NXTEXT_BPP=16
CONFIG_EXAMPLES_NXTEXT_BMCACHE=128
CONFIG_EXAMPLES_NXTEXT_GLCACHE=16
#
# Example Color Configuration
#
CONFIG_EXAMPLES_NXTEXT_DEFAULT_COLORS=y
#
# Example Font Configuration
#
CONFIG_EXAMPLES_NXTEXT_DEFAULT_FONT=y
# CONFIG_EXAMPLES_NXTEXT_EXTERNINIT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
CONFIG_NSH_BUILTIN_APPS=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_KILL is not set
# CONFIG_NSH_DISABLE_LOSETUP is not set
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MKFIFO is not set
# CONFIG_NSH_DISABLE_MKRD is not set
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
#
# Configure Command Options
#
CONFIG_NSH_CMDOPT_DF_H=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
CONFIG_NSH_ARCHINIT=y
#
# NxWidgets/NxWM
#
# CONFIG_NXWIDGETS is not set
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
CONFIG_SYSTEM_SYSINFO=y
#
# USB Monitor
#

77
configs/mikroe-stm32f4/nxtext/setenv.sh Executable file
View File

@ -0,0 +1,77 @@
#!/bin/bash
# configs/stm32f4discovery/usbnsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export TOOLCHAIN_BIN="/home/ken/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

2
configs/mikroe-stm32f4/src/Makefile
View File

@ -90,7 +90,7 @@ ifeq ($(CONFIG_INPUT),y)
CSRCS += up_touchscreen.c
endif
ifeq ($(ARCH_CONFIG_LCD_MIO283QT2),y)
ifeq ($(CONFIG_LCD_MIO283QT2),y)
CSRCS += up_mio283qt2.c
endif

91
configs/mikroe-stm32f4/src/mikroe-stm32f4-internal.h
View File

@ -115,6 +115,70 @@
# define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN5)
#endif
/* TFT LCD Controller GPIOs
*
* PE8, LCD_RST -- Low value holds in reset
* PE15, LCD_CS -- Low value selects LCD
* PE9, LCD_BLED -- Backlight -- Low value turns off
* PE12, RS -- High values selects data
*
* PE10, PMPRD -- Low to read from the LCD
* PE11, PMPWR -- Low to write to the LCD
*
*/
#define GPIO_LCD_RST (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN8)
#define GPIO_LCD_CS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN15)
#define LCD_CS_PIN GPIO_PIN15
#define GPIO_LCD_BLED (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN9)
#define GPIO_LCD_RS (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN12)
#define LCD_RS_PIN GPIO_PIN12
#define GPIO_LCD_PMPRD (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN10)
#define LCD_PMPRD_PIN GPIO_PIN10
#define GPIO_LCD_PMPWR (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN11)
#define LCD_PMPWR_PIN GPIO_PIN11
#define GPIO_LCD_T_D0 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN0)
#define GPIO_LCD_T_D1 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN1)
#define GPIO_LCD_T_D2 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN2)
#define GPIO_LCD_T_D3 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN3)
#define GPIO_LCD_T_D4 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN4)
#define GPIO_LCD_T_D5 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN5)
#define GPIO_LCD_T_D6 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN6)
#define GPIO_LCD_T_D7 (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_PORTE|GPIO_PIN7)
#define GPIO_TP_DRIVEA (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
#define GPIO_TP_DRIVEB (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
/****************************************************************************************************
* Public Types
****************************************************************************************************/
@ -165,6 +229,31 @@ void weak_function stm32_usbinitialize(void);
#error "The Mikroe-STM32F4 board does not support HOST OTG, only device!"
#endif
/****************************************************************************************************
* Name: stm32_lcdinitialize
*
* Description:
* Initialize the LCD. This function should be called early in the boot sequendce -- Even if the
* LCD is not enabled. In that case we should at a minimum at least disable the LCD backlight.
*
****************************************************************************************************/
#ifdef CONFIG_LCD_MIO283QT2
void stm32_lcdinitialize(void);
#endif
/****************************************************************************************************
* Name: up_lcdinitialize
*
* Description:
* Initialize the LCD video hardware. The initial state of the LCD is fully initialized, display
* memory cleared, and the LCD ready to use, but with the power setting at 0 (full off).
*
****************************************************************************************************/
#ifdef CONFIG_LCD_MIO283QT2
int up_lcdinitialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_MIKROE_STM32F4_SRC_MIKROE_STM32F4_INTERNAL_H */

6
configs/mikroe-stm32f4/src/up_boot.c
View File

@ -71,6 +71,12 @@
void stm32_boardinitialize(void)
{
/* Configure GPIOs for controlling the LCD */
#ifdef CONFIG_LCD_MIO283QT2
stm32_lcdinitialize();
#endif
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* stm32_spiinitialize() has been brought into the link.
*/

476
configs/mikroe-stm32f4/src/up_mio283qt2.c
View File

@ -8,6 +8,8 @@
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
*
* Modified: 2013 by Ken Pettit to support Mikroe-STM32F4 board.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
@ -57,6 +59,7 @@
#include "up_arch.h"
#include "stm32.h"
#include "stm32_gpio.h"
#include "mikroe-stm32f4-internal.h"
#ifdef CONFIG_LCD_MIO283QT2
@ -66,10 +69,6 @@
**************************************************************************************/
/* Configuration **********************************************************************/
#ifndef CONFIG_PIC32MX_PMP
# error "CONFIG_PIC32MX_PMP is required to use the LCD"
#endif
/* Define CONFIG_DEBUG_LCD to enable detailed LCD debug output. Verbose debug must
* also be enabled.
*/
@ -84,59 +83,40 @@
# undef CONFIG_DEBUG_LCD
#endif
/* PIC32MX7MMB LCD Hardware Definitions ***********************************************/
/* Mikroe-STM32F4 Hardware Definitions ************************************************/
/* --- ---------------------------------- -------------------- ------------------------
* PIN CONFIGURATIONS SIGNAL NAME ON-BOARD CONNECTIONS
* (Family Data Sheet Table 1-1) (PIC32MX7 Schematic)
* --- ---------------------------------- -------------------- ------------------------
* 6 RC1/T2CK LCD_RST TFT display
* 43 PMA1/AETXD3/AN14/ERXD2/PMALH/RB14 LCD-CS# TFT display, HDR2 pin 3
* 77 OC3/RD2 LCD_BLED LCD backlight LED
* 44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ LCD-RS TFT display
* PMALL/RB15
* 39 PE8 LCD_RST TFT display
* 46 PE15 LCD-CS# TFT display
* 40 PE9 LCD_BLED LCD backlight LED
* 43 PE12 LCD-RS TFT display
*
* 34 PMA13/AN10/RB10/CVREFOUT LCD-YD TFT display
* 35 PMA12/AETXERR/AN11/ERXERR/RB11 LCD-XR TFT display
* 41 PMA11/AECRS/AN12/ERXD0/RB12 LCD-YU TFT display
* 42 PMA10/AECOL/AN13/ERXD1/RB13 LCD-XL TFT display
*
* 93 PMD0/RE0 PMPD0 TFT display, HDR1 pin 18
* 94 PMD1/RE1 PMPD1 TFT display, HDR1 pin 17
* 98 PMD2/RE2 PMPD2 TFT display, HDR1 pin 16
* 99 PMD3/RE3 PMPD3 TFT display, HDR1 pin 15
* 100 PMD4/RE4 PMPD4 TFT display, HDR1 pin 14
* 3 PMD5/RE5 PMPD5 TFT display, HDR1 pin 13
* 4 PMD6/RE6 PMPD6 TFT display, HDR1 pin 12
* 5 PMD7/RE7 PMPD7 TFT display, HDR1 pin 11
* 90 PMD8/C2RX/RG0 PMPD8 TFT display, HDR1 pin 10
* 89 PMD9/C2TX/ETXERR/RG1 PMPD9 TFT display, HDR1 pin 9
* 88 PMD10/C1TX/ETXD0/RF1 PMPD10 TFT display, HDR1 pin 8
* 87 PMD11/C1RX/ETXD1/RF0 PMPD11 TFT display, HDR1 pin 7
* 79 PMD12/ETXD2/IC5/RD12 PMPD12 TFT display, HDR1 pin 6
* 80 PMD13/CN19/ETXD3/RD13 PMPD13 TFT display, HDR1 pin 5
* 83 PMD14/CN15/ETXEN/RD6 PMPD14 TFT display, HDR1 pin 4
* 84 PMD15/CN16/ETXCLK/RD7 PMPD15 TFT display, HDR1 pin 3
* 97 RE0 T_D0 TFT display
* 98 RE1 T_D1 TFT display
* 1 RE2 T_D2 TFT display
* 2 RE3 T_D3 TFT display
* 3 RE4 T_D4 TFT display
* 4 RE5 T_D5 TFT display
* 5 RE6 T_D6 TFT display
* 38 RE7 T_D7 TFT display
*
* 82 CN14/PMRD/RD5 PMPRD
* 81 CN13/OC5/PMWR/RD4 PMPWR
* 41 PE10 PMPRD
* 42 RE11 PMPWR
*
* TOUCHSCREEN PIN CONFIGURATIONS
* PIN CONFIGURATIONS SIGNAL NAME ON-BOARD CONNECTIONS
* --- ---------------------------------- -------------------- ------------------------
* 35 PB0 LCD-YD TFT display
* ? LCD-XR TFT display
* ? LCD-YU TFT display
* 36 PB1 LCD-XL TFT display
* 95 PB8 DRIVEA TFT display
* 96 PB9 DRIVEB TFT display
*/
/* RC1, Reset -- Low value holds in reset */
#define GPIO_LCD_RST (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTC|GPIO_PIN1)
/* RB14, LCD select -- Low value selects LCD */
#define GPIO_LCD_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTB|GPIO_PIN14)
/* RD2, Backlight -- Low value turns off */
#define GPIO_LCD_BLED (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTD|GPIO_PIN2)
/* RB15, RS -- High values selects data */
#define GPIO_LCD_RS (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTB|GPIO_PIN15)
/* Debug ******************************************************************************/
#ifdef CONFIG_DEBUG_LCD
@ -151,12 +131,11 @@
* Private Type Definition
**************************************************************************************/
struct pic32mx7mmb_dev_s
struct stm32f4_dev_s
{
struct mio283qt2_lcd_s dev; /* The externally visible part of the driver */
bool data; /* true=data selected */
bool selected; /* true=LCD selected */
bool reading; /* true=We are in a read sequence */
bool grammode; /* true=Writing to GRAM (16-bit write vs 8-bit) */
bool firstread;/* First GRAM read? */
FAR struct lcd_dev_s *drvr; /* The saved instance of the LCD driver */
};
@ -165,14 +144,14 @@ struct pic32mx7mmb_dev_s
**************************************************************************************/
/* Low Level LCD access */
static void pic32mx_select(FAR struct mio283qt2_lcd_s *dev);
static void pic32mx_deselect(FAR struct mio283qt2_lcd_s *dev);
static void pic32mx_index(FAR struct mio283qt2_lcd_s *dev, uint8_t index);
#ifndef CONFIG_MIO283QT2_WRONLY
static uint16_t pic32mx_read(FAR struct mio283qt2_lcd_s *dev);
static void stm32_select(FAR struct mio283qt2_lcd_s *dev);
static void stm32_deselect(FAR struct mio283qt2_lcd_s *dev);
static void stm32_index(FAR struct mio283qt2_lcd_s *dev, uint8_t index);
#if !defined(CONFIG_MIO283QT2_WRONLY) && CONFIG_LCD_NOGETRUN != 1
static uint16_t stm32_read(FAR struct mio283qt2_lcd_s *dev);
#endif
static void pic32mx_write(FAR struct mio283qt2_lcd_s *dev, uint16_t data);
static void pic32mx_backlight(FAR struct mio283qt2_lcd_s *dev, int power);
static void stm32_write(FAR struct mio283qt2_lcd_s *dev, uint16_t data);
static void stm32_backlight(FAR struct mio283qt2_lcd_s *dev, int power);
/**************************************************************************************
* Private Data
@ -180,235 +159,331 @@ static void pic32mx_backlight(FAR struct mio283qt2_lcd_s *dev, int power);
/* This is the driver state structure (there is no retained state information) */
static struct pic32mx7mmb_dev_s g_pic32mx7mmb_lcd =
static struct stm32f4_dev_s g_stm32f4_lcd =
{
{
.select = pic32mx_select,
.deselect = pic32mx_deselect,
.index = pic32mx_index,
#ifndef CONFIG_MIO283QT2_WRONLY
.read = pic32mx_read,
.select = stm32_select,
.deselect = stm32_deselect,
.index = stm32_index,
#if !defined(CONFIG_MIO283QT2_WRONLY) && CONFIG_LCD_NOGETRUN != 1
.read = stm32_read,
#endif
.write = pic32mx_write,
.backlight = pic32mx_backlight
.write = stm32_write,
.backlight = stm32_backlight
}
};
static uint32_t * volatile g_portsetreset = (uint32_t *) STM32_GPIOE_BSRR;
/**************************************************************************************
* Private Functions
**************************************************************************************/
/**************************************************************************************
* Name: pic32mx_command
* Name: stm32_tinydelay
*
* Description:
* Delay for a few hundered NS.
*
**************************************************************************************/
static void stm32_tinydelay(void)
{
volatile uint8_t x = 0;
for (x = 1; x > 0; x--)
;
}
/**************************************************************************************
* Name: stm32_command
*
* Description:
* Configure to write an LCD command
*
**************************************************************************************/
static void pic32mx_command(FAR struct pic32mx7mmb_dev_s *priv)
static inline void stm32_command(void)
{
uint32_t * volatile portsetreset = (uint32_t *) STM32_GPIOE_BSRR;
/* Low selects command */
if (priv->data)
{
pic32mx_gpiowrite(GPIO_LCD_RS, false);
priv->data = false; /* Command, not data */
priv->reading = false; /* No read sequence in progress */
}
*portsetreset = (1 << LCD_RS_PIN) << 16;
}
/**************************************************************************************
* Name: pic32mx_data
* Name: stm32_data
*
* Description:
* Configure to read or write LCD data
*
**************************************************************************************/
static void pic32mx_data(FAR struct pic32mx7mmb_dev_s *priv)
static inline void stm32_data(void)
{
/* Hi selects data */
if (!priv->data)
{
pic32mx_gpiowrite(GPIO_LCD_RS, true);
priv->data = true; /* Data, not command */
priv->reading = false; /* No read sequence in progress */
}
*g_portsetreset = 1 << LCD_RS_PIN;
}
/**************************************************************************************
* Name: pic32mx_data
*
* Description:
* Wait until the PMP is no longer busy
*
**************************************************************************************/
static void pic32mx_busywait(void)
{
while ((getreg32(PIC32MX_PMP_MODE) & PMP_MODE_BUSY) != 0);
}
/**************************************************************************************
* Name: pic32mx_select
* Name: stm32_select
*
* Description:
* Select the LCD device
*
**************************************************************************************/
static void pic32mx_select(FAR struct mio283qt2_lcd_s *dev)
static void stm32_select(FAR struct mio283qt2_lcd_s *dev)
{
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
/* CS low selects */
if (!priv->selected)
{
pic32mx_gpiowrite(GPIO_LCD_CS, false);
priv->selected = true; /* LCD selected */
priv->reading = false; /* No read sequence in progress */
}
*g_portsetreset = (1 << LCD_CS_PIN) << 16;
}
/**************************************************************************************
* Name: pic32mx_deselect
* Name: stm32_deselect
*
* Description:
* De-select the LCD device
*
**************************************************************************************/
static void pic32mx_deselect(FAR struct mio283qt2_lcd_s *dev)
static void stm32_deselect(FAR struct mio283qt2_lcd_s *dev)
{
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
/* CS high de-selects */
if (priv->selected)
{
pic32mx_gpiowrite(GPIO_LCD_CS, true);
priv->selected = false; /* LCD not selected */
priv->reading = false; /* No read sequence in progress */
}
*g_portsetreset = 1 << LCD_CS_PIN;
}
/**************************************************************************************
* Name: pic32mx_index
* Name: stm32_index
*
* Description:
* Set the index register
*
**************************************************************************************/
static void pic32mx_index(FAR struct mio283qt2_lcd_s *dev, uint8_t index)
static void stm32_index(FAR struct mio283qt2_lcd_s *dev, uint8_t index)
{
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
FAR struct stm32f4_dev_s *priv = (FAR struct stm32f4_dev_s *)dev;
/* Make sure that the PMP is not busy from the last transaction. Read data is not
* available until the busy bit becomes zero.
/* Setup to write in command mode (vs data mode) */
stm32_command();
/* Write the index register to the 8-bit GPIO pin bus. We are violating the
* datasheet here a little by driving the WR pin low at the same time as
* the data, but the fact is that all ASIC logic will latch on the rising
* edge of WR anyway, not the falling edge. We are just shaving off a few
* cycles every time this routine is called, which will be farirly often.
*/
pic32mx_busywait();
*g_portsetreset = index | ((uint8_t) (~index) << 16) |
((1 << LCD_PMPWR_PIN) << 16);
/* Write the 8-bit command (on the 16-bit data bus) */
/* Record if we are accessing GRAM or not (16 vs 8 bit accesses)
* NOTE. This also serves as a delay between WR low to WR high
* transition.
*/
pic32mx_command(priv);
putreg16((uint16_t)index, PIC32MX_PMP_DIN);
priv->grammode = index == 0x22;
priv->firstread = true;
/* Now raise the WR line */
*g_portsetreset = (1 << LCD_PMPWR_PIN);
/* Back to data mode to read/write the data */
stm32_data();
}
/**************************************************************************************
* Name: pic32mx_read
* Name: stm32_read
*
* Description:
* Read LCD data (GRAM data or register contents)
*
**************************************************************************************/
#ifndef CONFIG_MIO283QT2_WRONLY
static uint16_t pic32mx_read(FAR struct mio283qt2_lcd_s *dev)
#if !defined(CONFIG_MIO283QT2_WRONLY) && CONFIG_LCD_NOGETRUN != 1
static uint16_t stm32_read(FAR struct mio283qt2_lcd_s *dev)
{
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
FAR struct stm32f4_dev_s *priv = (FAR struct stm32f4_dev_s *)dev;
uint32_t * volatile portsetreset = (uint32_t *) STM32_GPIOE_BSRR;
uint32_t * volatile portmode = (uint32_t *) STM32_GPIOE_MODER;
uint32_t * volatile portinput = (uint32_t *) STM32_GPIOE_IDR;
uint16_t data;
/* Make sure that the PMP is not busy from the last transaction. Read data is not
* available until the busy bit becomes zero.
*/
/* Set the I/O Port to input mode. Ugly, but fast. */
pic32mx_busywait();
*portmode &= 0xFFFF0000;
/* Read 16-bits of data */
/* Read the data */
pic32mx_data(priv);
data = getreg16(PIC32MX_PMP_DIN);
*portsetreset = (1 << LCD_PMPRD_PIN) << 16;
stm32_tinydelay();
data = *portinput & 0x00FF;
*portsetreset = (1 << LCD_PMPRD_PIN);
/* We need to discard the first 16-bits of data that we read and re-read inorder
* to get valid data (that is just the way that the PMP works).
*/
/* Test if a 16-bit read is needed (GRAM mode) */
if (!priv->reading)
if (priv->grammode)
{
data = getreg16(PIC32MX_PMP_DIN);
/* If this is the 1st GRAM read, then discard the dummy byte */
if (priv->firstread)
{
priv->firstread = false;
*portsetreset = (1 << LCD_PMPRD_PIN) << 16;
stm32_tinydelay();
data = *portinput;
*portsetreset = (1 << LCD_PMPRD_PIN);
}
/* Okay, a 16-bit read is actually a 24-bit read from the LCD.
* this is because the read color format of the MIO283QT-2 is a bit
* different than the 16-bit write color format. During a read,
* the R,G and B samples are read on subsequent bytes, and the
* data is MSB aligned. We must re-construct the 16-bit 565 data.
*/
/* Clip RED sample to 5-bits and shit to MSB */
data = (data & 0xF8) << 8;
/* Now read Green sample */
*portsetreset = (1 << LCD_PMPRD_PIN) << 16;
stm32_tinydelay();
data |= (*portinput & 0x00FC) << 3;
*portsetreset = (1 << LCD_PMPRD_PIN);
/* Now read Blue sample */
*portsetreset = (1 << LCD_PMPRD_PIN) << 16;
stm32_tinydelay();
data |= (*portinput & 0x00F8) >> 3;
*portsetreset = (1 << LCD_PMPRD_PIN);
}
/* Put the port back in output mode. Ugly, but fast. */
*portmode |= 0x00005555;
return data;
}
#endif
/**************************************************************************************
* Name: pic32mx_write
* Name: stm32_write
*
* Description:
* Write LCD data (GRAM data or register contents)
*
**************************************************************************************/
static void pic32mx_write(FAR struct mio283qt2_lcd_s *dev, uint16_t data)
static void stm32_write(FAR struct mio283qt2_lcd_s *dev, uint16_t data)
{
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
FAR struct stm32f4_dev_s *priv = (FAR struct stm32f4_dev_s *)dev;
/* Make sure that the PMP is not busy from the last transaction */
/* Write the data register to the 8-bit GPIO pin bus. We are violating the
* datasheet here a little by driving the WR pin low at the same time as
* the data, but the fact is that all ASIC logic will latch on the rising
* edge of WR anyway, not the falling edge. We are just shaving off a few
* cycles every time this routine is called, which will be farirly often.
*/
pic32mx_busywait();
if (priv->grammode)
{
/* Need to write 16-bit pixel data (16 BPP). Write the upper pixel data first */
/* Write 16-bits of data */
*g_portsetreset = ((data>>8) & 0xFF) | (((~data>>8) & 0xFF) << 16) |
((1 << LCD_PMPWR_PIN) << 16);
stm32_tinydelay();
*g_portsetreset = (1 << LCD_PMPWR_PIN);
}
pic32mx_data(priv);
putreg16(data, PIC32MX_PMP_DIN);
/* Now write the lower 8-bit of data */
/* We are not in a write sequence */
priv->reading = false;
*g_portsetreset = (data & 0xFF) | ((~data & 0xFF) << 16) |
((1 << LCD_PMPWR_PIN) << 16);
stm32_tinydelay();
*g_portsetreset = (1 << LCD_PMPWR_PIN);
}
/**************************************************************************************
* Name: pic32mx_write
* Name: stm32_backlight
*
* Description:
* Write LCD data (GRAM data or register contents)
* Set the backlight power level.
*
**************************************************************************************/
static void pic32mx_backlight(FAR struct mio283qt2_lcd_s *dev, int power)
static void stm32_backlight(FAR struct mio283qt2_lcd_s *dev, int power)
{
/* For now, we just control the backlight as a discrete. Pulse width modulation
* would be required to vary the backlight level. A low value turns the backlight
* off.
*/
pic32mx_gpiowrite(GPIO_LCD_BLED, power > 0);
stm32_gpiowrite(GPIO_LCD_BLED, power > 0);
}
/**************************************************************************************
* Public Functions
**************************************************************************************/
/**************************************************************************************
* Name: stm32_lcdinitialize
*
* Description:
* Initialize the LCD. This function should be called early in the boot
* sequendce -- Even if the LCD is not enabled. In that case we should
* at a minimum at least disable the LCD backlight.
*
**************************************************************************************/
void stm32_lcdinitialize(void)
{
/* Configure all LCD discrete controls. LCD will be left in this state:
* 1. Held in reset,
* 2. Not selected,
* 3. Backlight off,
* 4. Command selected.
*/
#ifdef CONFIG_LCD_MIO283QT2
stm32_configgpio(GPIO_LCD_RST);
stm32_configgpio(GPIO_LCD_CS);
stm32_configgpio(GPIO_LCD_BLED);
stm32_gpiowrite(GPIO_LCD_BLED, false);
stm32_configgpio(GPIO_LCD_RS);
stm32_configgpio(GPIO_LCD_PMPWR);
stm32_configgpio(GPIO_LCD_PMPRD);
/* Configure PE0-7 for output */
stm32_configgpio(GPIO_LCD_T_D0);
stm32_configgpio(GPIO_LCD_T_D1);
stm32_configgpio(GPIO_LCD_T_D2);
stm32_configgpio(GPIO_LCD_T_D3);
stm32_configgpio(GPIO_LCD_T_D4);
stm32_configgpio(GPIO_LCD_T_D5);
stm32_configgpio(GPIO_LCD_T_D6);
stm32_configgpio(GPIO_LCD_T_D7);
#else
/* Just configure the backlight control as an output and turn off the
* backlight for now.
*/
stm32_configgpio(GPIO_LCD_BLED);
#endif
}
/**************************************************************************************
* Name: up_lcdinitialize
*
@ -421,66 +496,37 @@ static void pic32mx_backlight(FAR struct mio283qt2_lcd_s *dev, int power)
int up_lcdinitialize(void)
{
uint32_t regval;
/* Only initialize the driver once. NOTE: The LCD GPIOs were already configured
* by pic32mx_lcdinitialize.
* by stm32_lcdinitialize.
*/
if (!g_pic32mx7mmb_lcd.drvr)
if (!g_stm32f4_lcd.drvr)
{
lcdvdbg("Initializing\n");
/* Hold the LCD in reset (active low) */
pic32mx_gpiowrite(GPIO_LCD_RST, false);
/* Configure PMP to support the LCD */
putreg32(0, PIC32MX_PMP_MODE);
putreg32(0, PIC32MX_PMP_AEN);
putreg32(0, PIC32MX_PMP_CON);
/* Set LCD timing values, PMP master mode 2, 16-bit mode, no address
* increment, and no interrupts.
*/
regval = (PMP_MODE_WAITE_RD(0) | PMP_MODE_WAITM(3) | PMP_MODE_WAITB_1TPB |
PMP_MODE_MODE_MODE2 | PMP_MODE_MODE16 | PMP_MODE_INCM_NONE |
PMP_MODE_IRQM_NONE);
putreg32(regval, PIC32MX_PMP_MODE);
/* Enable the PMP for reading and writing */
regval = (PMP_CON_CSF_ADDR1415 | PMP_CON_PTRDEN | PMP_CON_PTWREN |
PMP_CON_ADRMUX_NONE | PMP_CON_ON);
putreg32(regval, PIC32MX_PMP_CON);
stm32_gpiowrite(GPIO_LCD_RST, false);
/* Bring the LCD out of reset */
up_mdelay(5);
pic32mx_gpiowrite(GPIO_LCD_RST, true);
stm32_gpiowrite(GPIO_LCD_RST, true);
/* Configure and enable the LCD */
up_mdelay(50);
g_pic32mx7mmb_lcd.drvr = mio283qt2_lcdinitialize(&g_pic32mx7mmb_lcd.dev);
if (!g_pic32mx7mmb_lcd.drvr)
g_stm32f4_lcd.drvr = mio283qt2_lcdinitialize(&g_stm32f4_lcd.dev);
if (!g_stm32f4_lcd.drvr)
{
lcddbg("ERROR: mio283qt2_lcdinitialize failed\n");
return -ENODEV;
}
}
/* Clear the display (setting it to the color 0=black) */
#if 0 /* Already done in the driver */
mio283qt2_clear(g_pic32mx7mmb_lcd.drvr, 0);
#endif
/* Turn the display off */
g_pic32mx7mmb_lcd.drvr->setpower(g_pic32mx7mmb_lcd.drvr, 0);
g_stm32f4_lcd.drvr->setpower(g_stm32f4_lcd.drvr, 0);
return OK;
}
@ -496,7 +542,7 @@ int up_lcdinitialize(void)
FAR struct lcd_dev_s *up_lcdgetdev(int lcddev)
{
DEBUGASSERT(lcddev == 0);
return g_pic32mx7mmb_lcd.drvr;
return g_stm32f4_lcd.drvr;
}
/**************************************************************************************
@ -511,41 +557,7 @@ void up_lcduninitialize(void)
{
/* Turn the display off */
g_pic32mx7mmb_lcd.drvr->setpower(g_pic32mx7mmb_lcd.drvr, 0);
g_stm32f4_lcd.drvr->setpower(g_stm32f4_lcd.drvr, 0);
}
#endif /* CONFIG_LCD_MIO283QT2 */
/****************************************************************************
* Name: pic32mx_lcdinitialize
*
* Description:
* Initialize the LCD. This function should be called early in the boot
* sequendce -- Even if the LCD is not enabled. In that case we should
* at a minimum at least disable the LCD backlight.
*
****************************************************************************/
void pic32mx_lcdinitialize(void)
{
/* Configure all LCD discrete controls. LCD will be left in this state:
* 1. Held in reset,
* 2. Not selected,
* 3. Backlight off,
* 4. Command selected.
*/
#ifdef CONFIG_LCD_MIO283QT2
pic32mx_configgpio(GPIO_LCD_RST);
pic32mx_configgpio(GPIO_LCD_CS);
pic32mx_configgpio(GPIO_LCD_BLED);
pic32mx_configgpio(GPIO_LCD_RS);
#else
/* Just configure the backlight control as an output and turn off the
* backlight for now.
*/
pic32mx_configgpio(GPIO_LCD_BLED);
#endif
}

13
configs/mikroe-stm32f4/src/up_nsh.c
View File

@ -331,5 +331,18 @@ int nsh_archinitialize(void)
}
#endif
#ifdef CONFIG_LCD_MIO283QT2
/* Configure the TFT LCD module */
message("nsh_archinitialize: Initializing TFT LCD module\n");
ret = up_lcdinitialize();
if (ret != OK)
{
message("nsh_archinitialize: Failed to initialize TFT LCD module\n");
}
#endif
return OK;
}

4
configs/mikroe-stm32f4/usbnsh/defconfig
View File

@ -208,6 +208,7 @@ CONFIG_STM32_SPI=y
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
CONFIG_STM32_JTAG_SW_ENABLE=y
CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
# CONFIG_STM32_FORCEPOWER is not set
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
# CONFIG_STM32_CCMEXCLUDE is not set
@ -427,7 +428,6 @@ CONFIG_MTD_SMART_SECTOR_SIZE=512
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
CONFIG_SERIAL_REMOVABLE=y
@ -643,7 +643,6 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
@ -660,6 +659,7 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_FLASH_TEST is not set
# CONFIG_EXAMPLES_SMART_TEST is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set