Move initialization functions from sched/ to sched/init

sched/Makefile

@@ -41,8 +41,8 @@ DEPPATH = --dep-path .
 ASRCS =
 AOBJS = $(ASRCS:.S=$(OBJEXT))
 
-MISC_SRCS  = os_start.c os_bringup.c errno_getptr.c sched_garbage.c
+MISC_SRCS  = errno_getptr.c sched_garbage.c sched_getfiles.c
-MISC_SRCS += sched_getfiles.c sched_getsockets.c sched_getstreams.c
+MISC_SRCS += sched_getsockets.c sched_getstreams.c
 
 ifeq ($(CONFIG_NUTTX_KERNEL),y)
 MISC_SRCS += errno_get.c errno_set.c
@@ -110,6 +110,7 @@ ifneq ($(CONFIG_DISABLE_SIGNALS),y)
 TIME_SRCS += nanosleep.c
 endif
 
+include init/Make.defs
 include irq/Make.defs
 include paging/Make.defs
 include group/Make.defs
@@ -123,7 +124,7 @@ include timer/Make.defs
 include environ/Make.defs
 
 CSRCS  = $(MISC_SRCS) $(TSK_SRCS) $(SCHED_SRCS) $(TIME_SRCS)
-CSRCS += $(IRQ_SRCS) $(PG_SRCS) $(GRP_SRCS) $(WDOG_SRCS) $(SEM_SRCS) $(SIGNAL_SRCS) $(PTHREAD_SRCS) $(MQUEUE_SRCS) $(CLOCK_SRCS) $(TIMER_SRCS) $(ENV_SRCS)
+CSRCS += $(INIT_SRCS) $(IRQ_SRCS) $(PG_SRCS) $(GRP_SRCS) $(WDOG_SRCS) $(SEM_SRCS) $(SIGNAL_SRCS) $(PTHREAD_SRCS) $(MQUEUE_SRCS) $(CLOCK_SRCS) $(TIMER_SRCS) $(ENV_SRCS)
 
 COBJS = $(CSRCS:.c=$(OBJEXT))
 

sched/init/Make.defs

@@ -0,0 +1,41 @@
+############################################################################
+# sched/init/Make.defs
+#
+#   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+INIT_SRCS = os_start.c os_bringup.c
+
+# Include init build support
+
+DEPPATH += --dep-path init
+VPATH += :init

sched/init/init.h

@@ -0,0 +1,115 @@
+/****************************************************************************
+ * sched/init/init.h
+ *
+ *   Copyright (C) 2007-2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __SCHED_INIT_INIT_H
+#define __SCHED_INIT_INIT_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdbool.h>
+#include <queue.h>
+#include <sched.h>
+
+#include <nuttx/kmalloc.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Type Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Global Variables
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+/****************************************************************************
+ * Name: os_start
+ *
+ * Description:
+ *   This function is called to initialize the operating system and to spawn
+ *   the user initialization thread of execution.  This is the initial entry
+ *   point into NuttX
+ *
+ * Input Parameters:
+ *   None
+ *
+ * Returned value:
+ *   Does not return.
+ *
+ ****************************************************************************/
+
+void os_start(void);
+
+/****************************************************************************
+ * Name: os_bringup
+ *
+ * Description:
+ *   Start all initial system tasks.  This does the "system bring-up" after
+ *   the conclusion of basic OS initialization.  These initial system tasks
+ *   may include:
+ *
+ *   - pg_worker:   The page-fault worker thread (only if CONFIG_PAGING is
+ *                  defined.
+ *   - work_thread: The work thread.  This general thread can be used to
+ *                  perform most any kind of queued work.  Its primary
+ *                  function is to serve as the "bottom half" of device
+ *                  drivers.
+ *
+ *   And the main application entry point:
+ *   symbols:
+ *
+ *   - USER_ENTRYPOINT: This is the default user application entry point.
+ *
+ * Input Parameters:
+ *   None
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+int os_bringup(void);
+
+#endif /* __SCHED_INIT_INIT_H */

sched/init/os_bringup.c

@@ -1,5 +1,5 @@
 /****************************************************************************
- * sched/os_bringup.c
+ * sched/init/os_bringup.c
  *
  *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -57,6 +57,7 @@
 #ifdef CONFIG_PAGING
 # include "paging/paging.h"
 #endif
+# include "init/init.h"
 
 /****************************************************************************
  * Pre-processor Definitions
@@ -126,6 +127,12 @@
  *
  *   - USER_ENTRYPOINT: This is the default user application entry point.
  *
+ * Input Parameters:
+ *   None
+ *
+ * Returned Value:
+ *   None
+ *
  ****************************************************************************/
 
 int os_bringup(void)

sched/init/os_start.c

@@ -1,5 +1,5 @@
 /****************************************************************************
- * sched/os_start.c
+ * sched/init/os_start.c
  *
  *   Copyright (C) 2007-2014 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
@@ -67,6 +67,7 @@
 #ifdef HAVE_TASK_GROUP
 #include  "group/group.h"
 #endif
+#include  "init/init.h"
 
 /****************************************************************************
  * Pre-processor Definitions
@@ -168,7 +169,7 @@ volatile pid_t g_lastpid;
  * the number of tasks to CONFIG_MAX_TASKS.
  */
 
-pidhash_t g_pidhash[CONFIG_MAX_TASKS];
+struct pidhash_s g_pidhash[CONFIG_MAX_TASKS];
 
 /* This is a table of task lists.  This table is indexed by
  * the task state enumeration type (tstate_t) and provides
@@ -177,7 +178,7 @@ pidhash_t g_pidhash[CONFIG_MAX_TASKS];
  * is an ordered list or not.
  */
 
-const tasklist_t g_tasklisttable[NUM_TASK_STATES] =
+const struct tasklist_s g_tasklisttable[NUM_TASK_STATES] =
 {
   { NULL,                    false },  /* TSTATE_TASK_INVALID */
   { &g_pendingtasks,         true  },  /* TSTATE_TASK_PENDING */
@@ -228,7 +229,14 @@ static FAR const char g_idlename[] = "Idle Task";
  *
  * Description:
  *   This function is called to initialize the operating system and to spawn
- *   the user initization thread of execution
+ *   the user initialization thread of execution.  This is the initial entry
+ *   point into NuttX
+ *
+ * Input Parameters:
+ *   None
+ *
+ * Returned value:
+ *   Does not return.
  *
  ****************************************************************************/
 

sched/os_internal.h

@@ -69,14 +69,6 @@
 #define MAX_TASKS_MASK      (CONFIG_MAX_TASKS-1)
 #define PIDHASH(pid)        ((pid) & MAX_TASKS_MASK)
 
-/* A more efficient ways to access the errno */
-
-#define SET_ERRNO(e) \
-  { struct tcb_s *rtcb = struct tcb_s*)g_readytorun.head; rtcb->pterrno = (e); }
-
-#define _SET_TCB_ERRNO(t,e) \
-  { (t)->pterrno = (e); }
-
 /****************************************************************************
  * Public Type Definitions
  ****************************************************************************/
@@ -101,8 +93,6 @@ struct pidhash_s
 #endif
 };
 
-typedef struct pidhash_s  pidhash_t;
-
 /* This structure defines an element of the g_tasklisttable[].
  * This table is used to map a task_state enumeration to the
  * corresponding task list.
@@ -114,8 +104,6 @@ struct tasklist_s
   bool prioritized;               /* true if the list is prioritized */
 };
 
-typedef struct tasklist_s tasklist_t;
-
 /****************************************************************************
  * Global Variables
  ****************************************************************************/
@@ -209,7 +197,7 @@ extern volatile pid_t g_lastpid;
  * of tasks to CONFIG_MAX_TASKS.
  */
 
-extern pidhash_t g_pidhash[CONFIG_MAX_TASKS];
+extern struct pidhash_s g_pidhash[CONFIG_MAX_TASKS];
 
 /* This is a table of task lists.  This table is indexed by the task state
  * enumeration type (tstate_t) and provides a pointer to the associated
@@ -217,7 +205,7 @@ extern pidhash_t g_pidhash[CONFIG_MAX_TASKS];
  * if the list is an ordered list or not.
  */
 
-extern const tasklist_t g_tasklisttable[NUM_TASK_STATES];
+extern const struct tasklist_s g_tasklisttable[NUM_TASK_STATES];
 
 #ifdef CONFIG_SCHED_CPULOAD
 /* This is the total number of clock tick counts.  Essentially the
@@ -231,7 +219,6 @@ extern volatile uint32_t g_cpuload_total;
  * Public Function Prototypes
  ****************************************************************************/
 
-int  os_bringup(void);
 #ifdef CONFIG_SCHED_CHILD_STATUS
 void weak_function task_initialize(void);
 #endif