sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Updated README file, cosmetic changes to comments and debug output

Browse Source
This commit is contained in:
Gregory Nutt 2014-07-30 10:19:09 -06:00
parent fd98a31014
commit 9c80dfb31c
4 changed files with 25 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
configs/sama5d4-ek/README.txt
View File

@ -1592,7 +1592,10 @@ HSMCI Card Slots
Auto-Mounter
============
NuttX implements an auto-mounter than can make working with SD cards easier. With the auto-mounter, the file system will be automatically mounted when the SD card in the SD card is inserted into the HSMCI slot and automatically unmounted when the SD card is removed.
NuttX implements an auto-mounter than can make working with SD cards
easier. With the auto-mounter, the file system will be automatically
mounted when the SD card is inserted into the HSMCI slot and automatically
unmounted when the SD card is removed.
Here is a sample configuration for the auto-mounter:
@ -1607,6 +1610,13 @@ Auto-Mounter
CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_DDELAY=1000
CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_UDELAY=2000
WARNING: SD cards should never be removed without first unmounting
them. This is to avoid data and possible corruption of the file
system. Certainly this is the case if you are writing to the SD card
at the time of the removal. If you use the SD card for read-only access,
however, then I cannot think of any reason why removing the card without
mounting would be harmful.
USB Ports
=========
@ -3786,12 +3796,6 @@ Configurations
disabled; there was a problem at one time but that has probably
been fixed. HSCMI with TX DMA re-enabled needs to be verified.
There does seem to be an issue with removing then re-inserting
an SD card. In that case, the SD card will fail to mount the
when the card is re-inserted. Hopefully this problem will be
fixed before you read this (in which case, I forgot to remove
this note).
13. Networking is supported via EMAC0. See the "Networking" section
above for detailed configuration settings. DHCP is not used in
this configuration; rather, a hard-coded IP address of 10.0.0.2 is
@ -4225,7 +4229,8 @@ To-Do List
to be verified by re-enabled HSMCI TX DMA.
Also, CONFIG_MMCSD_MULTIBLOCK_DISABLE=y is set to disable multi-block
transfers.
transfers. The is very low priority to me but might be important to you
if you are need very high performance SD card accesses.
3) There is a kludge in place in the Ethernet code to work around a problem
that I see. The problem that I see is as follows:

6
drivers/mmcsd/mmcsd_sdio.c
View File

@ -1477,6 +1477,7 @@ static ssize_t mmcsd_readmultiple(FAR struct mmcsd_state_s *priv,
SDIO_BLOCKSETUP(priv->dev, priv->blocksize, nblocks);
SDIO_WAITENABLE(priv->dev, SDIOWAIT_TRANSFERDONE|SDIOWAIT_TIMEOUT|SDIOWAIT_ERROR);
#ifdef CONFIG_SDIO_DMA
if (priv->dma)
{
@ -1878,7 +1879,6 @@ static ssize_t mmcsd_writemultiple(FAR struct mmcsd_state_s *priv,
return ret;
}
/* Wait for the transfer to complete */
ret = mmcsd_eventwait(priv, SDIOWAIT_TIMEOUT|SDIOWAIT_ERROR, nblocks * MMCSD_BLOCK_WDATADELAY);
@ -2606,7 +2606,7 @@ static int mmcsd_sdinitialize(FAR struct mmcsd_state_s *priv)
/* Send CMD9, SEND_CSD, in standby state/data-transfer mode to obtain the
* Card Specific Data (CSD) register. The argument is the RCA that we
* just obtained from CMD3. The card stays in standy state/data-transfer
* just obtained from CMD3. The card stays in standby state/data-transfer
* mode.
*/
@ -3264,7 +3264,7 @@ int mmcsd_slotinitialize(int minor, FAR struct sdio_dev_s *dev)
SDIO_CALLBACKENABLE(priv->dev, SDIOMEDIA_INSERTED);
fdbg("MMC/SD slot is empty\n");
fvdbg("MMC/SD slot is empty\n");
}
else
{

6
fs/fs_automount.c
View File

@ -387,7 +387,7 @@ static void automount_timeout(int argc, uint32_t arg1, ...)
ret = work_queue(LPWORK, &priv->work, automount_worker, priv, 0);
if (ret < 0)
{
/* NOTE: Currently, work_cancel only returns success */
/* NOTE: Currently, work_queue only returns success */
fdbg("ERROR: Failed to schedule work: %d\n", ret);
}
@ -501,7 +501,7 @@ static int automount_interrupt(FAR const struct automount_lower_s *lower,
priv->lower->ddelay);
if (ret < 0)
{
/* NOTE: Currently, work_cancel only returns success */
/* NOTE: Currently, work_queue only returns success */
fdbg("ERROR: Failed to schedule work: %d\n", ret);
}
@ -579,7 +579,7 @@ FAR void *automount_initialize(FAR const struct automount_lower_s *lower)
priv->lower->ddelay);
if (ret < 0)
{
/* NOTE: Currently, work_cancel only returns success */
/* NOTE: Currently, work_queue only returns success */
fdbg("ERROR: Failed to schedule work: %d\n", ret);
}

12
fs/fs_mount.c
View File

@ -246,7 +246,7 @@ int mount(FAR const char *source, FAR const char *target,
ret = find_blockdriver(source, mountflags, &blkdrvr_inode);
if (ret < 0)
{
fdbg("Failed to find block driver %s\n", source);
fdbg("ERROR: Failed to find block driver %s\n", source);
errcode = -ret;
goto errout;
}
@ -260,7 +260,7 @@ int mount(FAR const char *source, FAR const char *target,
else
#endif /* NONBDFS_SUPPORT */
{
fdbg("Failed to find file system %s\n", filesystemtype);
fdbg("ERROR: Failed to find file system %s\n", filesystemtype);
errcode = ENODEV;
goto errout;
}
@ -281,7 +281,7 @@ int mount(FAR const char *source, FAR const char *target,
* -ENOMEM - Failed to allocate in-memory resources for the operation
*/
fdbg("Failed to reserve inode\n");
fdbg("ERROR: Failed to reserve inode\n");
errcode = -ret;
goto errout_with_semaphore;
}
@ -295,7 +295,7 @@ int mount(FAR const char *source, FAR const char *target,
{
/* The filesystem does not support the bind operation ??? */
fdbg("Filesystem does not support bind\n");
fdbg("ERROR: Filesystem does not support bind\n");
errcode = EINVAL;
goto errout_with_mountpt;
}
@ -325,7 +325,7 @@ int mount(FAR const char *source, FAR const char *target,
* error.
*/
fdbg("Bind method failed: %d\n", ret);
fdbg("ERROR: Bind method failed: %d\n", ret);
#ifdef BDFS_SUPPORT
#ifdef NONBDFS_SUPPORT
if (blkdrvr_inode)
@ -400,7 +400,7 @@ errout:
return ERROR;
#else
fdbg("No filesystems enabled\n");
fdbg("ERROR: No filesystems enabled\n");
set_errno(ENOSYS);
return ERROR;
#endif /* BDFS_SUPPORT || NONBDFS_SUPPORT */