sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAM4E-EK: Enable interrupt stack in all configurations

Browse Source
This commit is contained in:
Gregory Nutt 2014-03-23 10:12:57 -06:00
parent a37ad4ecca
commit 9d9631243a
4 changed files with 21 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/src/sam34/sam_udp.c
View File

@ -2165,7 +2165,7 @@ static int sam_udp_interrupt(int irq, void *context)
/* Suspend, treated last */ /* Suspend, treated last */
if ((pending == UDP_INT_RXSUSP) != 0) if (pending == UDP_INT_RXSUSP)
{ {
usbtrace(TRACE_INTDECODE(SAM_TRACEINTID_RXSUSP), usbtrace(TRACE_INTDECODE(SAM_TRACEINTID_RXSUSP),
(uint16_t)pending); (uint16_t)pending);

26
configs/sam4e-ek/README.txt
View File

@ -1063,7 +1063,16 @@ Configurations
NOTES: NOTES:
1. NSH built-in applications are supported. 1. Default stack sizes are large and should really be tuned to reduce
the RAM footprint:
CONFIG_ARCH_INTERRUPTSTACK=2048
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_DEFAULT=2048
... and others ...
2. NSH built-in applications are supported.
Binary Formats: Binary Formats:
CONFIG_BUILTIN=y : Enable support for built-in programs CONFIG_BUILTIN=y : Enable support for built-in programs
@ -1071,7 +1080,7 @@ Configurations
Applicaton Configuration: Applicaton Configuration:
CONFIG_NSH_BUILTIN_APPS=y : Enable starting apps from NSH command line CONFIG_NSH_BUILTIN_APPS=y : Enable starting apps from NSH command line
2. This configuration has the network enabled by default. This can be 3. This configuration has the network enabled by default. This can be
easily disabled or reconfigured (See see the network related easily disabled or reconfigured (See see the network related
configuration settings above in the section entitled "Networking"). configuration settings above in the section entitled "Networking").
@ -1091,7 +1100,7 @@ Configurations
2014-3-13: The basic NSH serial console is working. Network support 2014-3-13: The basic NSH serial console is working. Network support
has been verified. has been verified.
3. This configuration supports a network with fixed IP address. You 4. This configuration supports a network with fixed IP address. You
may have to change these settings for your network: may have to change these settings for your network:
CONFIG_NSH_IPADDR=0x0a000002 : IP address: 10.0.0.2 CONFIG_NSH_IPADDR=0x0a000002 : IP address: 10.0.0.2
@ -1107,7 +1116,7 @@ Configurations
CONFIG_NSH_DHCPC=y : Tells NSH to use DHCPC, not CONFIG_NSH_DHCPC=y : Tells NSH to use DHCPC, not
: the fixed addresses : the fixed addresses
4. This configuration has the DMA-based SPI0 and AT25 Serial FLASH 5. This configuration has the DMA-based SPI0 and AT25 Serial FLASH
support enabled by default. This can be easily disabled or support enabled by default. This can be easily disabled or
reconfigured (See see the configuration settings and usage notes reconfigured (See see the configuration settings and usage notes
above in the section entitled "AT25 Serial FLASH"). above in the section entitled "AT25 Serial FLASH").
@ -1120,7 +1129,7 @@ Configurations
2014-3-14: The DMA-based SPI appears to be functional and can be used 2014-3-14: The DMA-based SPI appears to be functional and can be used
to support a FAT file system on the AT25 Serial FLASH. to support a FAT file system on the AT25 Serial FLASH.
5. USB device support is not enabled in this configuration by default. 6. USB device support is not enabled in this configuration by default.
To add USB device support to this configuration, see the instructions To add USB device support to this configuration, see the instructions
above under "USB Full-Speed Device." above under "USB Full-Speed Device."
@ -1135,14 +1144,14 @@ Configurations
protocol (not likely) or with the FAT format on the AT25 protocol (not likely) or with the FAT format on the AT25
serial FLASH (likely). serial FLASH (likely).
6. This configuration can be used to verify the touchscreen on on the 7. This configuration can be used to verify the touchscreen on on the
SAM4E-EK LCD. See the instructions above in the paragraph entitled SAM4E-EK LCD. See the instructions above in the paragraph entitled
"Touchscreen". "Touchscreen".
STATUS: STATUS:
2014-3-21: The touchscreen has not yet been tested. 2014-3-21: The touchscreen has not yet been tested.
7. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card 8. Enabling HSMCI support. The SAM3U-KE provides a an SD memory card
slot. Support for the SD slot can be enabled following the slot. Support for the SD slot can be enabled following the
instructions provided above in the paragraph entitled "HSMCI." instructions provided above in the paragraph entitled "HSMCI."
@ -1160,7 +1169,8 @@ Configurations
NOTES: NOTES:
1. See the NOTES in the description of the nsh configuration. Those 1. See the NOTES in the description of the nsh configuration. Those
notes all apply here as well. notes all apply here as well. Some additional notes unique to
the USB console version follow:
2. The configuration differences between this configuration and the 2. The configuration differences between this configuration and the
nsh configuration is: nsh configuration is:

2
configs/sam4e-ek/nsh/defconfig
View File

@ -288,7 +288,7 @@ CONFIG_BOARD_LOOPSPERMSEC=8720
# #
# Interrupt options # Interrupt options
# #
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y CONFIG_ARCH_HAVE_INTERRUPTSTACK=2048
CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_INTERRUPTSTACK=0
CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
# CONFIG_ARCH_HIPRI_INTERRUPT is not set # CONFIG_ARCH_HIPRI_INTERRUPT is not set

2
configs/sam4e-ek/usbnsh/defconfig
View File

@ -282,7 +282,7 @@ CONFIG_BOARD_LOOPSPERMSEC=8720
# #
# Interrupt options # Interrupt options
# #
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y CONFIG_ARCH_HAVE_INTERRUPTSTACK=2048
CONFIG_ARCH_INTERRUPTSTACK=0 CONFIG_ARCH_INTERRUPTSTACK=0
CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
# CONFIG_ARCH_HIPRI_INTERRUPT is not set # CONFIG_ARCH_HIPRI_INTERRUPT is not set