Add vector and chip cability definitions for the SAM4L family
This commit is contained in:
Gregory Nutt
parent
d4b3514c85
commit
9e8ed732da
@ -48,20 +48,152 @@
|
||||
|
||||
/* Get customizations for each supported chip */
|
||||
|
||||
#ifdef CONFIG_ARCH_CHIP_AT91SAM3U4E
|
||||
/* AT91SAM3U Family *****************************************************************/
|
||||
|
||||
#if defined(CONFIG_ARCH_CHIP_AT91SAM3U4E)
|
||||
|
||||
/* Internal memory */
|
||||
|
||||
# define CONFIG_SAM34_SRAM0_SIZE 0x00008000 /* 32Kb */
|
||||
# define CONFIG_SAM34_SRAM1_SIZE 0x00004000 /* 16Kb */
|
||||
# define CONFIG_SAM34_NFCSRAM_SIZE 0x00001000 /* 4Kb */
|
||||
# define CONFIG_SAM34_FLASH_SIZE (256*1024) /* 256Kb */
|
||||
# define CONFIG_SAM34_SRAM0_SIZE (32*1024) /* 32Kb */
|
||||
# define CONFIG_SAM34_SRAM1_SIZE (16*1024) /* 16Kb */
|
||||
# define CONFIG_SAM34_NFCSRAM_SIZE (4*1024) /* 4Kb */
|
||||
|
||||
/* DMA */
|
||||
/* Peripherals */
|
||||
|
||||
# define CONFIG_SAM34_NDMACHAN 4 /* 4 DMA Channels */
|
||||
# define SAM34_NDMACHAN 4 /* 4 DMA Channels */
|
||||
# define SAM34_NMCI2 1 /* 1 memory card interface */
|
||||
# define SAM32_NSLCD 0 /* No segment LCD interface */
|
||||
# define SAM32_NAESA 0 /* No advanced encryption standard */
|
||||
# define SAM32_NUDPHS 1 /* One USB high speed device */
|
||||
# define SAM32_NUDPFS 0 /* No USB full speed device */
|
||||
# define SAM32_NUHPFS 0 /* No USB full speed embedded host */
|
||||
|
||||
/* Memory card interface */
|
||||
/* AT91SAM4L Family *****************************************************************/
|
||||
/* Sub-family differences:
|
||||
*
|
||||
* FEATURE ATSAM4LCxx ATSAM4LSxx
|
||||
* ----------------------- ------------- -------------
|
||||
* SEGMENT LCD Yes No
|
||||
* AESA Yes No
|
||||
* USB Device + Host Device Only
|
||||
*
|
||||
* Note: The SEGMENT LCD capability varies with packaging.
|
||||
*
|
||||
* FEATURE ATSAM4Lx2x ATSAM4Lx4x
|
||||
* ----------------------- ------------- -------------
|
||||
* FLASH 256KB 128KB
|
||||
* SRAM 32KB 32KB
|
||||
*
|
||||
* Packaging differences:
|
||||
*
|
||||
* FEATURE ATSAM4LxxC ATSAM4LxxB ATSAM4LxxA
|
||||
* ----------------------- ---------- ---------- ----------
|
||||
* Number of Pins 100 64 48
|
||||
* Max Frequency 48MHz 48MHz 48MHz
|
||||
* SEGMENT LCD 4x40 4x23 4x13
|
||||
* GPIO 75 43 27
|
||||
* High-drive pins 6 3 1
|
||||
* External Interrupts 8+NMI 8+NMI 8+NMI
|
||||
* TWI Masters 2 2 1
|
||||
* TWI Master/Slave 2 2 1
|
||||
* USART 4 4 3
|
||||
* PICOUART 1 1 1
|
||||
* Peripheral DMA Channels 16 16 16
|
||||
* Peripheral Even System 1 1 1
|
||||
* SPI 1 1 1
|
||||
* Asynchronous Timers 1 1 1
|
||||
* Timer/Counter Channels 6 3 3
|
||||
* Parallel Capture Inputs 8 8 8
|
||||
* Frequency Meter 1 1 1
|
||||
* Watchdog Timer 1 1 1
|
||||
* Power Manager 1 1 1
|
||||
* Glue Logic LUT 2 2 1
|
||||
* ADC 15-channel 7-channel 3-channel
|
||||
* DAC 1-channel 1-channel 1-channel
|
||||
* Analog Comparators 4 2 1
|
||||
* CATB Sensors 32 32 26
|
||||
* Audio Bitstream DAC 1 1 1
|
||||
* IIS Controller 1 1 1
|
||||
* Packages TQFP/VFBGA TQFP/QFN TQFP/QFN
|
||||
*/
|
||||
|
||||
#elif defined(CONFIG_ARCH_CHIP_AT91SAM4LC2)
|
||||
|
||||
/* Internal memory */
|
||||
|
||||
# define CONFIG_SAM34_FLASH_SIZE (128*1024) /* 128Kb */
|
||||
# define CONFIG_SAM34_SRAM0_SIZE (32*1024) /* 32Kb */
|
||||
# define CONFIG_SAM34_SRAM1_SIZE (0) /* None */
|
||||
# define CONFIG_SAM34_NFCSRAM_SIZE (0) /* None */
|
||||
|
||||
/* Peripherals */
|
||||
|
||||
# define SAM34_NDMACHAN 16 /* 16 Peripheral DMA Channels */
|
||||
# define SAM34_NMCI2 0 /* No memory card interface */
|
||||
# define SAM32_NSLCD 1 /* 1 segment LCD interface */
|
||||
# define SAM32_NAESA 1 /* 1 advanced encryption standard */
|
||||
# define SAM32_NUDPHS 0 /* No USB high speed device */
|
||||
# define SAM32_NUDPFS 1 /* 1 USB full speed device */
|
||||
# define SAM32_NUHPFS 1 /* 1 USB full speed embedded host */
|
||||
|
||||
#elif defined(CONFIG_ARCH_CHIP_AT91SAM4LC4)
|
||||
|
||||
/* Internal memory */
|
||||
|
||||
# define CONFIG_SAM34_FLASH_SIZE (256*1024) /* 256Kb */
|
||||
# define CONFIG_SAM34_SRAM0_SIZE (32*1024) /* 32Kb */
|
||||
# define CONFIG_SAM34_SRAM1_SIZE (0) /* None */
|
||||
# define CONFIG_SAM34_NFCSRAM_SIZE (0) /* None */
|
||||
|
||||
/* Peripherals */
|
||||
|
||||
# define SAM34_NDMACHAN 16 /* 16 Peripheral DMA Channels */
|
||||
# define SAM34_NMCI2 0 /* No memory card interface */
|
||||
# define SAM32_NSLCD 1 /* 1 segment LCD interface */
|
||||
# define SAM32_NAESA 1 /* 1 advanced encryption standard */
|
||||
# define SAM32_NUDPHS 0 /* No USB high speed device */
|
||||
# define SAM32_NUDPFS 1 /* 1 USB full speed device */
|
||||
# define SAM32_NUHPFS 1 /* 1 USB full speed embedded host */
|
||||
|
||||
#elif defined(CONFIG_ARCH_CHIP_AT91SAM4LS2)
|
||||
|
||||
/* Internal memory */
|
||||
|
||||
# define CONFIG_SAM34_FLASH_SIZE (128*1024) /* 128Kb */
|
||||
# define CONFIG_SAM34_SRAM0_SIZE (32*1024) /* 32Kb */
|
||||
# define CONFIG_SAM34_SRAM1_SIZE (0) /* None */
|
||||
# define CONFIG_SAM34_NFCSRAM_SIZE (0) /* None */
|
||||
|
||||
/* Peripherals */
|
||||
|
||||
# define SAM34_NDMACHAN 16 /* 16 Peripheral DMA Channels */
|
||||
# define SAM34_NMCI2 0 /* No memory card interface */
|
||||
# define SAM32_NSLCD 0 /* No segment LCD interface */
|
||||
# define SAM32_NAESA 0 /* No advanced encryption standard */
|
||||
# define SAM32_NUDPHS 0 /* No USB high speed device */
|
||||
# define SAM32_NUDPFS 1 /* 1 USB full speed device */
|
||||
# define SAM32_NUHPFS 0 /* No USB full speed embedded host */
|
||||
|
||||
#elif defined(CONFIG_ARCH_CHIP_AT91SAM4LS4)
|
||||
|
||||
/* Internal memory */
|
||||
|
||||
# define CONFIG_SAM34_FLASH_SIZE (256*1024) /* 256Kb */
|
||||
# define CONFIG_SAM34_SRAM0_SIZE (32*1024) /* 32Kb */
|
||||
# define CONFIG_SAM34_SRAM1_SIZE (0) /* None */
|
||||
# define CONFIG_SAM34_NFCSRAM_SIZE (0) /* None */
|
||||
|
||||
/* Peripherals */
|
||||
|
||||
# define SAM34_NDMACHAN 16 /* 16 Peripheral DMA Channels */
|
||||
# define SAM34_NMCI2 0 /* No memory card interface */
|
||||
# define SAM32_NSLCD 0 /* No segment LCD interface */
|
||||
# define SAM32_NAESA 0 /* No advanced encryption standard */
|
||||
# define SAM32_NUDPHS 0 /* No USB high speed device */
|
||||
# define SAM32_NUDPFS 1 /* 1 USB full speed device */
|
||||
# define SAM32_NUHPFS 0 /* No USB full speed embedded host */
|
||||
|
||||
# define CONFIG_SAM34_MCI2 1
|
||||
#else
|
||||
# error "Unknown SAM3/4 chip type"
|
||||
#endif
|
||||
|
||||
@ -49,6 +49,21 @@
|
||||
#include <arch/sam34/chip.h>
|
||||
#include "chip/sam_memorymap.h"
|
||||
|
||||
/* If the common ARMv7-M vector handling logic is used, then include the required
|
||||
* vector definitions as well.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_ARMV7M_CMNVECTOR
|
||||
# if defined(CONFIG_ARCH_CHIP_SAM3U)
|
||||
# include "chip/sam3u_vectors.h"
|
||||
# elif defined(CONFIG_ARCH_CHIP_SAM4L)
|
||||
# include "chip/sam4l_vectors.h"
|
||||
# include "chip/sam4l_memorymap.h"
|
||||
# else
|
||||
# error Unrecognized SAM architecture
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
|
||||
@ -41,9 +41,6 @@
|
||||
* (upper-case) IRQ number as defined in arch/arm/include/sam/sam3u_irq.h.
|
||||
* sam_vectors.S will defined the VECTOR in different ways in order to generate
|
||||
* the interrupt vectors and handlers in their final form.
|
||||
*
|
||||
*
|
||||
* Vectors for low and medium density devices
|
||||
*/
|
||||
|
||||
/* If the common ARMv7-M vector handling is used, then all it needs is the following
|
||||
|
||||
136
arch/arm/src/sam34/chip/sam4l_vectors.h
Normal file
136
arch/arm/src/sam34/chip/sam4l_vectors.h
Normal file
@ -0,0 +1,136 @@
|
||||
/************************************************************************************************
|
||||
* arch/arm/src/sam34/chip/sam4l_vectors.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************************/
|
||||
|
||||
/************************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************************/
|
||||
/* This file is included by sam_vectors.S. It provides the macro VECTOR that
|
||||
* supplies ach SAM3U vector in terms of a (lower-case) ISR label and an
|
||||
* (upper-case) IRQ number as defined in arch/arm/include/sam/sam4l_irq.h.
|
||||
* sam_vectors.S will defined the VECTOR in different ways in order to generate
|
||||
* the interrupt vectors and handlers in their final form.
|
||||
*/
|
||||
|
||||
/* If the common ARMv7-M vector handling is used, then all it needs is the following
|
||||
* definition that provides the number of supported vectors.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_ARMV7M_CMNVECTOR
|
||||
|
||||
/* Reserve 80 interrupt table entries for I/O interrupts. */
|
||||
|
||||
# define ARMV7M_PERIPHERAL_INTERRUPTS 80
|
||||
|
||||
#else
|
||||
VECTOR(sam_hflashc, SAM_IRQ_HFLASHC) /* Vector 16+0: Flash Controller */
|
||||
VECTOR(sam_pdca0, SAM_IRQ_PDCA0) /* Vector 16+1: Peripheral DMA Controller 0 */
|
||||
VECTOR(sam_pdca1, SAM_IRQ_PDCA1) /* Vector 16+2: Peripheral DMA Controller 1 */
|
||||
VECTOR(sam_pdca2, SAM_IRQ_PDCA2) /* Vector 16+3: Peripheral DMA Controller 2 */
|
||||
VECTOR(sam_pdca3, SAM_IRQ_PDCA3) /* Vector 16+4: Peripheral DMA Controller 3 */
|
||||
VECTOR(sam_pdca4, SAM_IRQ_PDCA4) /* Vector 16+5: Peripheral DMA Controller 4 */
|
||||
VECTOR(sam_pdca5, SAM_IRQ_PDCA5) /* Vector 16+6: Peripheral DMA Controller 5 */
|
||||
VECTOR(sam_pdca6, SAM_IRQ_PDCA6) /* Vector 16+7: Peripheral DMA Controller 6 */
|
||||
VECTOR(sam_pdca7, SAM_IRQ_PDCA7) /* Vector 16+8: Peripheral DMA Controller 7 */
|
||||
VECTOR(sam_pdca8, SAM_IRQ_PDCA8) /* Vector 16+9: Peripheral DMA Controller 8 */
|
||||
VECTOR(sam_pdca9, SAM_IRQ_PDCA9) /* Vector 16+10: Peripheral DMA Controller 9 */
|
||||
VECTOR(sam_pdca10, SAM_IRQ_PDCA10) /* Vector 16+11: Peripheral DMA Controller 10 */
|
||||
VECTOR(sam_pdca11, SAM_IRQ_PDCA11) /* Vector 16+12: Peripheral DMA Controller 11 */
|
||||
VECTOR(sam_pdca12, SAM_IRQ_PDCA12) /* Vector 16+13: Peripheral DMA Controller 12 */
|
||||
VECTOR(sam_pdca13, SAM_IRQ_PDCA13) /* Vector 16+14: Peripheral DMA Controller 13 */
|
||||
VECTOR(sam_pdca14, SAM_IRQ_PDCA14) /* Vector 16+15: Peripheral DMA Controller 14 */
|
||||
VECTOR(sam_pdca15, SAM_IRQ_PDCA15) /* Vector 16+16: Peripheral DMA Controller 15 */
|
||||
VECTOR(sam_crccu, SAM_IRQ_CRCCU) /* Vector 16+17: CRC Calculation Unit */
|
||||
VECTOR(sam_usbc, SAM_IRQ_USBC) /* Vector 16+18: USB 2.0 Interface */
|
||||
VECTOR(sam_pevc_tr, SAM_IRQ_PEVC_TR) /* Vector 16+19: Peripheral Event Controller TR */
|
||||
VECTOR(sam_pevc_ov, SAM_IRQ_PEVC_OV) /* Vector 16+20: Peripheral Event Controller OV */
|
||||
VECTOR(sam_aesa, SAM_IRQ_AESA) /* Vector 16+21: Advanced Encryption Standard */
|
||||
VECTOR(sam_pm, SAM_IRQ_PM) /* Vector 16+22: Power Manager */
|
||||
VECTOR(sam_scif, SAM_IRQ_SCIF) /* Vector 16+23: System Control Interface */
|
||||
VECTOR(sam_freqm, SAM_IRQ_FREQM) /* Vector 16+24: Frequency Meter */
|
||||
VECTOR(sam_gpio0, SAM_IRQ_GPIO0) /* Vector 16+25: General-Purpose Input/Output Controller 0 */
|
||||
VECTOR(sam_gpio1, SAM_IRQ_GPIO1) /* Vector 16+26: General-Purpose Input/Output Controller 1 */
|
||||
VECTOR(sam_gpio2, SAM_IRQ_GPIO2) /* Vector 16+27: General-Purpose Input/Output Controller 2 */
|
||||
VECTOR(sam_gpio3, SAM_IRQ_GPIO3) /* Vector 16+28: General-Purpose Input/Output Controller 3 */
|
||||
VECTOR(sam_gpio4, SAM_IRQ_GPIO4) /* Vector 16+29: General-Purpose Input/Output Controller 4 */
|
||||
VECTOR(sam_gpio5, SAM_IRQ_GPIO5) /* Vector 16+30: General-Purpose Input/Output Controller 5 */
|
||||
VECTOR(sam_gpio6, SAM_IRQ_GPIO6) /* Vector 16+31: General-Purpose Input/Output Controller 6 */
|
||||
VECTOR(sam_gpio7, SAM_IRQ_GPIO7) /* Vector 16+32: General-Purpose Input/Output Controller 7 */
|
||||
VECTOR(sam_gpio8, SAM_IRQ_GPIO8) /* Vector 16+33: General-Purpose Input/Output Controller 8 */
|
||||
VECTOR(sam_gpio9, SAM_IRQ_GPIO9) /* Vector 16+34: General-Purpose Input/Output Controller 9 */
|
||||
VECTOR(sam_gpio10, SAM_IRQ_GPIO10) /* Vector 16+35: General-Purpose Input/Output Controller 10 */
|
||||
VECTOR(sam_gpio11, SAM_IRQ_GPIO11) /* Vector 16+36: General-Purpose Input/Output Controller 11 */
|
||||
VECTOR(sam_bpm, SAM_IRQ_BPM) /* Vector 16+37: Backup Power Manager */
|
||||
VECTOR(sam_bscif, SAM_IRQ_BSCIF) /* Vector 16+38: Backup System Control Interface */
|
||||
VECTOR(sam_ast_alarm, SAM_IRQ_AST_ALARM) /* Vector 16+39: Asynchronous Timer ALARM */
|
||||
VECTOR(sam_ast_per, SAM_IRQ_AST_PER) /* Vector 16+40: Asynchronous Timer PER */
|
||||
VECTOR(sam_ast_ovf, SAM_IRQ_AST_OVF) /* Vector 16+41: Asynchronous Timer OVF */
|
||||
VECTOR(sam_ast_ready, SAM_IRQ_AST_READY) /* Vector 16+42: Asynchronous Timer READY */
|
||||
VECTOR(sam_ast_clkready, SAM_IRQ_AST_CLKREADY) /* Vector 16+43: Asynchronous Timer CLKREADY */
|
||||
VECTOR(sam_wdt, SAM_IRQ_WDT) /* Vector 16+44: Watchdog Timer */
|
||||
VECTOR(sam_eic1, SAM_IRQ_EIC1) /* Vector 16+45: External Interrupt Controller 1 */
|
||||
VECTOR(sam_eic2, SAM_IRQ_EIC2) /* Vector 16+46: External Interrupt Controller 2 */
|
||||
VECTOR(sam_eic3, SAM_IRQ_EIC3) /* Vector 16+47: External Interrupt Controller 3 */
|
||||
VECTOR(sam_eic4, SAM_IRQ_EIC4) /* Vector 16+48: External Interrupt Controller 4 */
|
||||
VECTOR(sam_eic5, SAM_IRQ_EIC5) /* Vector 16+49: External Interrupt Controller 5 */
|
||||
VECTOR(sam_eic6, SAM_IRQ_EIC6) /* Vector 16+50: External Interrupt Controller 6 */
|
||||
VECTOR(sam_eic7, SAM_IRQ_EIC7) /* Vector 16+51: External Interrupt Controller 7 */
|
||||
VECTOR(sam_eic8, SAM_IRQ_EIC8) /* Vector 16+52: External Interrupt Controller 8 */
|
||||
VECTOR(sam_iisc, SAM_IRQ_IISC) /* Vector 16+53: Inter-IC Sound (I2S) Controller */
|
||||
VECTOR(sam_spi, SAM_IRQ_SPI) /* Vector 16+54: Serial Peripheral Interface */
|
||||
VECTOR(sam_tc00, SAM_IRQ_TC00) /* Vector 16+55: Timer/Counter 0 */
|
||||
VECTOR(sam_tc01, SAM_IRQ_TC01) /* Vector 16+56: Timer/Counter 1 */
|
||||
VECTOR(sam_tc02, SAM_IRQ_TC02) /* Vector 16+57: Timer/Counter 2 */
|
||||
VECTOR(sam_tc10, SAM_IRQ_TC10) /* Vector 16+58: Timer/Counter 10 */
|
||||
VECTOR(sam_tc11, SAM_IRQ_TC11) /* Vector 16+59: Timer/Counter 11 */
|
||||
VECTOR(sam_tc12, SAM_IRQ_TC12) /* Vector 16+60: Timer/Counter 12 */
|
||||
VECTOR(sam_twim0, SAM_IRQ_TWIM0) /* Vector 16+61: Two-wire Master Interface TWIM0 */
|
||||
VECTOR(sam_twis0, SAM_IRQ_TWIS0) /* Vector 16+62: Two-wire Slave Interface TWIS0 */
|
||||
VECTOR(sam_twim1, SAM_IRQ_TWIM1) /* Vector 16+63: Two-wire Master Interface TWIM1 */
|
||||
VECTOR(sam_twis1, SAM_IRQ_TWIS1) /* Vector 16+64: Two-wire Slave Interface TWIS1 */
|
||||
VECTOR(sam_usart0, SAM_IRQ_USART0) /* Vector 16+65: USART0 */
|
||||
VECTOR(sam_usart1, SAM_IRQ_USART1) /* Vector 16+66: USART1 */
|
||||
VECTOR(sam_usart2, SAM_IRQ_USART2) /* Vector 16+67: USART2 */
|
||||
VECTOR(sam_usart3, SAM_IRQ_USART3) /* Vector 16+68: USART3 */
|
||||
VECTOR(sam_adcife, SAM_IRQ_ADCIFE) /* Vector 16+69: ADC controller interface */
|
||||
VECTOR(sam_dacc, SAM_IRQ_DACC) /* Vector 16+70: DAC Controller */
|
||||
VECTOR(sam_acifc, SAM_IRQ_ACIFC) /* Vector 16+71: Analog Comparator Interface */
|
||||
VECTOR(sam_abdacb, SAM_IRQ_ABDACB) /* Vector 16+72: Audio Bitstream DAC */
|
||||
VECTOR(sam_trng, SAM_IRQ_TRNG) /* Vector 16+73: True Random Number Generator */
|
||||
VECTOR(sam_parc, SAM_IRQ_PARC) /* Vector 16+74: Parallel Capture */
|
||||
VECTOR(sam_catb, SAM_IRQ_CATB) /* Vector 16+75: Capacitive Touch Module B */
|
||||
VECTOR(sam_twim2, SAM_IRQ_TWIM2) /* Vector 16+77: Two-wire Master Interface */
|
||||
VECTOR(sam_twim3, SAM_IRQ_TWIM3) /* Vector 16+78: Two-wire Master Interface */
|
||||
VECTOR(sam_lcdca, SAM_IRQ_LCDCA) /* Vector 16+79: LCD Controller A */
|
||||
#endif
|
||||
@ -46,7 +46,7 @@
|
||||
#if defined(CONFIG_ARCH_CHIP_SAM3U)
|
||||
# include "chip/sam3u_pinmap.h"
|
||||
#else
|
||||
# Unrecognized SAM architecture
|
||||
# error Unrecognized SAM architecture
|
||||
#endif
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_SAM34_CHIP_SAM_PINMAP_H */
|
||||
|
||||
@ -78,14 +78,14 @@
|
||||
/* Check the number of link list descriptors to allocate */
|
||||
|
||||
#ifndef CONFIG_SAM34_NLLDESC
|
||||
# define CONFIG_SAM34_NLLDESC CONFIG_SAM34_NDMACHAN
|
||||
# define CONFIG_SAM34_NLLDESC SAM34_NDMACHAN
|
||||
#endif
|
||||
|
||||
#if CONFIG_SAM34_NLLDESC < CONFIG_SAM34_NDMACHAN
|
||||
# warning "At least CONFIG_SAM34_NDMACHAN descriptors must be allocated"
|
||||
#if CONFIG_SAM34_NLLDESC < SAM34_NDMACHAN
|
||||
# warning "At least SAM34_NDMACHAN descriptors must be allocated"
|
||||
|
||||
# undef CONFIG_SAM34_NLLDESC
|
||||
# define CONFIG_SAM34_NLLDESC CONFIG_SAM34_NDMACHAN
|
||||
# define CONFIG_SAM34_NLLDESC SAM34_NDMACHAN
|
||||
#endif
|
||||
|
||||
/* Register values **********************************************************/
|
||||
@ -150,15 +150,15 @@ static struct dma_linklist_s g_linklist[CONFIG_SAM34_NLLDESC];
|
||||
|
||||
/* This array describes the state of each DMA */
|
||||
|
||||
static struct sam_dma_s g_dma[CONFIG_SAM34_NDMACHAN] =
|
||||
static struct sam_dma_s g_dma[SAM34_NDMACHAN] =
|
||||
{
|
||||
#ifdef CONFIG_ARCH_CHIP_AT91SAM3U4E
|
||||
/* the AT91SAM3U4E has four DMA channels. The FIFOs for channels 0-2 are
|
||||
* 8 bytes in size; channel 3 is 32 bytes.
|
||||
*/
|
||||
|
||||
#if CONFIG_SAM34_NDMACHAN != 4
|
||||
# error "Logic here assumes CONFIG_SAM34_NDMACHAN is 4"
|
||||
#if SAM34_NDMACHAN != 4
|
||||
# error "Logic here assumes SAM34_NDMACHAN is 4"
|
||||
#endif
|
||||
|
||||
{
|
||||
@ -1099,7 +1099,7 @@ static int sam_dmainterrupt(int irq, void *context)
|
||||
{
|
||||
/* Yes.. Check each bit to see which channel has interrupted */
|
||||
|
||||
for (chndx = 0; chndx < CONFIG_SAM34_NDMACHAN; chndx++)
|
||||
for (chndx = 0; chndx < SAM34_NDMACHAN; chndx++)
|
||||
{
|
||||
/* Are any interrupts pending for this channel? */
|
||||
|
||||
@ -1185,7 +1185,7 @@ void weak_function up_dmainitialize(void)
|
||||
/* Initialize semaphores */
|
||||
|
||||
sem_init(&g_chsem, 0, 1);
|
||||
sem_init(&g_dsem, 0, CONFIG_SAM34_NDMACHAN);
|
||||
sem_init(&g_dsem, 0, SAM34_NDMACHAN);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
@ -1224,7 +1224,7 @@ DMA_HANDLE sam_dmachannel(uint32_t dmach_flags)
|
||||
|
||||
dmach = NULL;
|
||||
sam_takechsem();
|
||||
for (chndx = 0; chndx < CONFIG_SAM34_NDMACHAN; chndx++)
|
||||
for (chndx = 0; chndx < SAM34_NDMACHAN; chndx++)
|
||||
{
|
||||
struct sam_dma_s *candidate = &g_dma[chndx];
|
||||
if (!candidate->inuse &&
|
||||
|
||||
@ -132,6 +132,8 @@ sam_vectors:
|
||||
|
||||
#if defined(CONFIG_ARCH_CHIP_SAM3U)
|
||||
# include "chip/sam3u_vectors.h"
|
||||
#elif defined(CONFIG_ARCH_CHIP_SAM4L)
|
||||
# include "chip/sam4l_vectors.h"
|
||||
#else
|
||||
# Unrecognized SAM architecture
|
||||
#endif
|
||||
@ -165,6 +167,8 @@ handlers:
|
||||
|
||||
#if defined(CONFIG_ARCH_CHIP_SAM3U)
|
||||
# include "chip/sam3u_vectors.h"
|
||||
#elif defined(CONFIG_ARCH_CHIP_SAM4L)
|
||||
# include "chip/sam4l_vectors.h"
|
||||
#else
|
||||
# Unrecognized SAM architecture
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue
Block a user