sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix some naming and comments associated with the Open1788 touchscreen

Browse Source
This commit is contained in:
Gregory Nutt 2013-04-15 11:25:08 -06:00
parent 7843047cec
commit 9ffc333b21
1 changed files with 5 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
configs/open1788/README.txt
View File

@ -179,7 +179,7 @@ Serial Console
CONFIG_UART1_2STOP=0
In this configuration using UART1, it is necessary to disable LED support
on the board. That is because UART1 RXD is set for pin p0.16, but so it
on the board. That is because UART1 RXD is set for pin p0.16, but so is
LED2. If you do not disable LED support then no incoming serial data will
be recevied.
@ -187,11 +187,12 @@ Serial Console
CONFIG_ARCH_LEDS=n : Disable LED support
You should also remove the LED2 jumper so that the RXD input does not
attempt to drive LED2 as well (this this does not seem to interfere with
attempt to drive LED2 as well (However, this does not seem to interfere with
data receipt).
NOTE: If you intend to use LEDs, then you might want to redesign some of
the LED logic in the src/ subdirectory so that it does not use LED2.
NOTE: If you intend to use LEDs with UART1, then you might want to
redesign some ofthe LED logic in the src/ subdirectory so that it does not
attempt to use LED2.
Using OpenOCD with the Olimex ARM-USB-OCD
=========================================