sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update README

Browse Source
This commit is contained in:
Gregory Nutt 2016-05-16 08:44:18 -06:00
parent a3f3cc12c0
commit a0cdbcb58f
2 changed files with 28 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
arch/arm/src/imx6/chip/imx_uart.h
View File

@ -195,10 +195,10 @@
#define UART_UCR1_RRDYEN (1 << 9) /* Bit 9: Receiver ready interrupt enable */ #define UART_UCR1_RRDYEN (1 << 9) /* Bit 9: Receiver ready interrupt enable */
#define UART_UCR1_ICD_SHIFT 10 /* Bit 10-11: Idle condition detect */ #define UART_UCR1_ICD_SHIFT 10 /* Bit 10-11: Idle condition detect */
#define UART_UCR1_ICD_MASK (3 << UART_UCR1_ICD_SHIFT) #define UART_UCR1_ICD_MASK (3 << UART_UCR1_ICD_SHIFT)
# define UART_UCR1_ICD_4FRMS (0 << UART_UCR1_ICD_SHIFT) /* Idle for more than 4 frames */ # define UART_UCR1_ICD_4FRMS (0 << UART_UCR1_ICD_SHIFT) /* Idle for more than 4 frames */
# define UART_UCR1_ICD_8FRMS (1 << UART_UCR1_ICD_SHIFT) /* Idle for more than 8 frames */ # define UART_UCR1_ICD_8FRMS (1 << UART_UCR1_ICD_SHIFT) /* Idle for more than 8 frames */
# define UART_UCR1_ICD_16FRMS (2 << UART_UCR1_ICD_SHIFT) /* Idle for more than 16 frames */ # define UART_UCR1_ICD_16FRMS (2 << UART_UCR1_ICD_SHIFT) /* Idle for more than 16 frames */
# define UART_UCR1_ICD_32FRMS (3 << UART_UCR1_ICD_SHIFT) /* Idle for more than 32 frames */ # define UART_UCR1_ICD_32FRMS (3 << UART_UCR1_ICD_SHIFT) /* Idle for more than 32 frames */
#define UART_UCR1_IDEN (1 << 12) /* Bit 12: Idle condition detected interrupt enable */ #define UART_UCR1_IDEN (1 << 12) /* Bit 12: Idle condition detected interrupt enable */
#define UART_UCR1_TRDYEN (1 << 13) /* Bit 13: Transmitter ready interrupt enable */ #define UART_UCR1_TRDYEN (1 << 13) /* Bit 13: Transmitter ready interrupt enable */
#define UART_UCR1_ADBR (1 << 14) /* Bit 14: Automatic detection of baud rate */ #define UART_UCR1_ADBR (1 << 14) /* Bit 14: Automatic detection of baud rate */

24
configs/sabre-6quad/README.txt
View File

@ -484,3 +484,27 @@ Configuration sub-directories
at apps/nshlib with the start logic at apps/examples/nsh. at apps/nshlib with the start logic at apps/examples/nsh.
NOTES: NOTES:
1. This configuration assumes that we are loaded into SDRAM and
started via U-Boot.
2. The serial console is configured by default for use UART1, the
USB VCOM port (UART1), same as the serial port used by U-Boot.
You will need to reconfigure if you want to use a different UART.
3. NSH built-in applications are supported, but no built-in
applications are enabled.
Binary Formats:
CONFIG_BUILTIN=y : Enable support for built-in programs
Application Configuration:
CONFIG_NSH_BUILTIN_APPS=y : Enable starting apps from NSH command line
4. The RAMLOG is enabled. All SYSLOG (DEBUG) output will go to the
RAMLOG and will not be visible unless you use the nsh 'dmesg'
command. To disable this RAMLOG feature, disable the following:
File Systems: CONFIG_SYSLOG
Device Drivers: CONFIG_RAMLOG