drivers/net/skeleton.c: Use more common 'Name:' vs. 'Function:'

drivers/net/skeleton.c

@@ -196,7 +196,7 @@ static void skel_ipv6multicast(FAR struct skel_driver_s *priv);
  ****************************************************************************/
 
 /****************************************************************************
- * Function: skel_transmit
+ * Name: skel_transmit
  *
  * Description:
  *   Start hardware transmission.  Called either from the txdone interrupt
@@ -237,7 +237,7 @@ static int skel_transmit(FAR struct skel_driver_s *priv)
 }
 
 /****************************************************************************
- * Function: skel_txpoll
+ * Name: skel_txpoll
  *
  * Description:
  *   The transmitter is available, check if the network has any outgoing
@@ -309,7 +309,7 @@ static int skel_txpoll(FAR struct net_driver_s *dev)
 }
 
 /****************************************************************************
- * Function: skel_receive
+ * Name: skel_receive
  *
  * Description:
  *   An interrupt was received indicating the availability of a new RX packet
@@ -451,7 +451,7 @@ static void skel_receive(FAR struct skel_driver_s *priv)
 }
 
 /****************************************************************************
- * Function: skel_txdone
+ * Name: skel_txdone
  *
  * Description:
  *   An interrupt was received indicating that the last TX packet(s) is done
@@ -491,7 +491,7 @@ static void skel_txdone(FAR struct skel_driver_s *priv)
 }
 
 /****************************************************************************
- * Function: skel_interrupt_work
+ * Name: skel_interrupt_work
  *
  * Description:
  *   Perform interrupt related work from the worker thread
@@ -543,7 +543,7 @@ static void skel_interrupt_work(FAR void *arg)
 }
 
 /****************************************************************************
- * Function: skel_interrupt
+ * Name: skel_interrupt
  *
  * Description:
  *   Hardware interrupt handler
@@ -590,7 +590,7 @@ static int skel_interrupt(int irq, FAR void *context, FAR void *arg)
 }
 
 /****************************************************************************
- * Function: skel_txtimeout_work
+ * Name: skel_txtimeout_work
  *
  * Description:
  *   Perform TX timeout related work from the worker thread
@@ -631,7 +631,7 @@ static void skel_txtimeout_work(FAR void *arg)
 }
 
 /****************************************************************************
- * Function: skel_txtimeout_expiry
+ * Name: skel_txtimeout_expiry
  *
  * Description:
  *   Our TX watchdog timed out.  Called from the timer interrupt handler.
@@ -666,7 +666,7 @@ static void skel_txtimeout_expiry(int argc, wdparm_t arg, ...)
 }
 
 /****************************************************************************
- * Function: skel_poll_process
+ * Name: skel_poll_process
  *
  * Description:
  *   Perform the periodic poll.  This may be called either from watchdog
@@ -687,7 +687,7 @@ static inline void skel_poll_process(FAR struct skel_driver_s *priv)
 }
 
 /****************************************************************************
- * Function: skel_poll_work
+ * Name: skel_poll_work
  *
  * Description:
  *   Perform periodic polling from the worker thread
@@ -736,7 +736,7 @@ static void skel_poll_work(FAR void *arg)
 }
 
 /****************************************************************************
- * Function: skel_poll_expiry
+ * Name: skel_poll_expiry
  *
  * Description:
  *   Periodic timer handler.  Called from the timer interrupt handler.
@@ -763,7 +763,7 @@ static void skel_poll_expiry(int argc, wdparm_t arg, ...)
 }
 
 /****************************************************************************
- * Function: skel_ifup
+ * Name: skel_ifup
  *
  * Description:
  *   NuttX Callback: Bring up the Ethernet interface when an IP address is
@@ -818,7 +818,7 @@ static int skel_ifup(FAR struct net_driver_s *dev)
 }
 
 /****************************************************************************
- * Function: skel_ifdown
+ * Name: skel_ifdown
  *
  * Description:
  *   NuttX Callback: Stop the interface.
@@ -861,7 +861,7 @@ static int skel_ifdown(FAR struct net_driver_s *dev)
 }
 
 /****************************************************************************
- * Function: skel_txavail_work
+ * Name: skel_txavail_work
  *
  * Description:
  *   Perform an out-of-cycle poll on the worker thread.
@@ -904,7 +904,7 @@ static void skel_txavail_work(FAR void *arg)
 }
 
 /****************************************************************************
- * Function: skel_txavail
+ * Name: skel_txavail
  *
  * Description:
  *   Driver callback invoked when new TX data is available.  This is a
@@ -942,7 +942,7 @@ static int skel_txavail(FAR struct net_driver_s *dev)
 }
 
 /****************************************************************************
- * Function: skel_addmac
+ * Name: skel_addmac
  *
  * Description:
  *   NuttX Callback: Add the specified MAC address to the hardware multicast
@@ -971,7 +971,7 @@ static int skel_addmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
 #endif
 
 /****************************************************************************
- * Function: skel_rmmac
+ * Name: skel_rmmac
  *
  * Description:
  *   NuttX Callback: Remove the specified MAC address from the hardware multicast
@@ -1000,7 +1000,7 @@ static int skel_rmmac(FAR struct net_driver_s *dev, FAR const uint8_t *mac)
 #endif
 
 /****************************************************************************
- * Function: skel_ipv6multicast
+ * Name: skel_ipv6multicast
  *
  * Description:
  *   Configure the IPv6 multicast MAC address.
@@ -1078,7 +1078,7 @@ static void skel_ipv6multicast(FAR struct skel_driver_s *priv)
  ****************************************************************************/
 
 /****************************************************************************
- * Function: skel_initialize
+ * Name: skel_initialize
  *
  * Description:
  *   Initialize the Ethernet controller and driver