sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove some excessive, redundant debug info per request of antin Berezenko. See Issue #8.

Browse Source
This commit is contained in:
Gregory Nutt 2016-06-14 15:48:40 -06:00
parent c384f33ac9
commit a308ea553b
3 changed files with 6 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
ChangeLog
View File

@ -12023,7 +12023,7 @@
- Increase the allowed SPI-Frequency from 20 to 40 MHz.
- Correct and rename the "VARSELECT" option
This option was included in the code as "CONFIG_SPI_VARSELECT" but
nowhere defined in a Kconfig file. The patch renames it to
nowhere defined in a Kconfig file. The change renames it to
"CONFIG_SAMV7_SPI_VARSELECT" and corrects the implementation
according the datasheet of Atmel. In short, this option switches
the processor from "fixed peripheral selection" (single device) to

2
arch/arm/src/tiva/chip/tm4c129_syscontrol.h
View File

@ -254,7 +254,7 @@
#define TIVA_SYSCON_UNIQUEID2_OFFSET 0x0f28 /* Unique ID 2 */
#define TIVA_SYSCON_UNIQUEID3_OFFSET 0x0f2c /* Unique ID 3 */
/*( CCM System Control Registers (CCM Control Offset) */
/* CCM System Control Registers (CCM Control Offset) */
#define TIVA_SYSCON_CCMCGREQ_OFFSET 0x0204 /* Cryptographic Modules Clock Gating Request */

22
drivers/leds/pca9635pw.c
View File

@ -53,14 +53,12 @@
****************************************************************************/
#ifdef CONFIG_DEBUG_LEDS
# define derr llerr
# ifdef CONFIG_DEBUG_INFO
# define dinfo llinfo
# else
# define dinfo(x...)
# endif
# define derr llerr
# define dwarn llwarn
# define dinfo llinfo
#else
# define derr(x...)
# define dwarn(x...)
# define dinfo(x...)
#endif
@ -121,8 +119,6 @@ static int pca9635pw_i2c_write_byte(FAR struct pca9635pw_dev_s *priv,
{
struct i2c_config_s config;
dinfo("pca9635pw_i2c_write_byte\n");
/* assemble the 2 byte message comprised of reg_addr and reg_val */
uint8_t const BUFFER_SIZE = 2;
@ -142,7 +138,6 @@ static int pca9635pw_i2c_write_byte(FAR struct pca9635pw_dev_s *priv,
dinfo("i2c addr: 0x%02X reg addr: 0x%02X value: 0x%02X\n", priv->i2c_addr,
buffer[0], buffer[1]);
ret = i2c_write(priv->i2c, &config, buffer, BUFFER_SIZE);
if (ret != OK)
{
@ -189,11 +184,8 @@ static int pca9635pw_set_led_mode(FAR struct pca9635pw_dev_s *priv,
static int pca9635pw_open(FAR struct file *filep)
{
dinfo("pca9635pw_open\n");
FAR struct inode *inode = filep->f_inode;
FAR struct pca9635pw_dev_s *priv = inode->i_private;
int ret = -1;
/* Wake up the PCA9635PW (sleep bit PCA9635PW_MODE_1_SLEEP is set to zero
@ -261,11 +253,8 @@ static int pca9635pw_open(FAR struct file *filep)
static int pca9635pw_close(FAR struct file *filep)
{
dinfo("pca9635pw_close\n");
FAR struct inode *inode = filep->f_inode;
FAR struct pca9635pw_dev_s *priv = inode->i_private;
int ret = -1;
/* Turn all led drivers off */
@ -301,11 +290,8 @@ static int pca9635pw_close(FAR struct file *filep)
static int pca9635pw_ioctl(FAR struct file *filep, int cmd, unsigned long arg)
{
dinfo("pca9635pw_ioctl\n");
FAR struct inode *inode = filep->f_inode;
FAR struct pca9635pw_dev_s *priv = inode->i_private;
int ret = OK;
dinfo("cmd: %d arg: %ld\n", cmd, arg);