Add support for the MIO283QT2 LCD
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4802 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
6c56cdeca7
commit
a3f23e3275
@ -75,7 +75,7 @@ PIN CONFIGURATIONS SIGNAL NAME ON-BOARD CONNE
|
||||
41 PMA11/AECRS/AN12/ERXD0/RB12 LCD-YU TFT display
|
||||
42 PMA10/AECOL/AN13/ERXD1/RB13 LCD-XL TFT display
|
||||
43 PMA1/AETXD3/AN14/ERXD2/PMALH/RB14 LCD-CS# TFT display, HDR2 pin 3
|
||||
44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ PMPA0/AN15/OCFB/CN12
|
||||
44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ LCD-RS TFT display
|
||||
PMALL/RB15
|
||||
45 VSS (grounded) ---
|
||||
46 VDD P32_VDD ---
|
||||
|
||||
@ -1214,6 +1214,8 @@ CONFIG_NXCONSOLE_CACHESIZE=32
|
||||
#
|
||||
# PIC32MX7 MMB LCD Hardware Configuration
|
||||
#
|
||||
# CONFIG_LCD_MIO283QT2
|
||||
# Enables the MIO183QT2 LCD support.
|
||||
# CONFIG_LCD_NOGETRUN
|
||||
# NX components need to know if it can read from the LCD or not. If reading
|
||||
# from the LCD is supported, then NxConsole can do more efficient
|
||||
@ -1232,7 +1234,8 @@ CONFIG_NXCONSOLE_CACHESIZE=32
|
||||
# PIC32MX7 MMB's LCD ribbon cable is at the top of the display.
|
||||
# Default is 320x240 "landscape" orientation.
|
||||
#
|
||||
CONFIG_LCD_NOGETRUN=y
|
||||
CONFIG_LCD_MIO283QT2=n
|
||||
CONFIG_LCD_NOGETRUN=n
|
||||
CONFIG_LCD_LANDSCAPE=n
|
||||
CONFIG_LCD_RLANDSCAPE=n
|
||||
CONFIG_LCD_PORTRAIT=n
|
||||
|
||||
@ -38,7 +38,7 @@
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
CSRCS = up_boot.c up_lcd.c up_leds.c up_spi.c
|
||||
CSRCS = up_boot.c up_leds.c up_spi.c up_mio283qt2.c
|
||||
|
||||
ifeq ($(CONFIG_PIC32MX_USBDEV),y)
|
||||
CSRCS += up_usbdev.c
|
||||
|
||||
@ -1,81 +0,0 @@
|
||||
/****************************************************************************
|
||||
* configs/pic32mx7mmb/src/up_lcd.c
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include "pic32mx-internal.h"
|
||||
#include "pic32mx7mmb_internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
****************************************************************************/
|
||||
/* LCD
|
||||
*
|
||||
* ------ -------- ------------------------- --------------------------------
|
||||
* GPIO SIGNAL BOARD CONNECTION NOTES
|
||||
* ------ -------- ------------------------- --------------------------------
|
||||
* RD2 LCD-BLED Backlight Light Low value turns off
|
||||
*/
|
||||
|
||||
#define GPIO_BLED (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTD|GPIO_PIN2)
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: pic32mx_lcdinitialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize the LCD. This function should be called early in the boot
|
||||
* sequendce -- Even if the LCD is not enabled. In that case we should
|
||||
* at a minimum at least disable the LCD backlight.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void pic32mx_lcdinitialize(void)
|
||||
{
|
||||
/* Just configure the backlight control as an output and turn off the
|
||||
* backlight for now.
|
||||
*/
|
||||
|
||||
pic32mx_configgpio(GPIO_BLED);
|
||||
}
|
||||
529
configs/pic32mx7mmb/src/up_mio283qt2.c
Normal file
529
configs/pic32mx7mmb/src/up_mio283qt2.c
Normal file
@ -0,0 +1,529 @@
|
||||
/**************************************************************************************
|
||||
* configs/stm32fdiscover/src/up_mio283qt2.c
|
||||
* arch/arm/src/board/up_mio283qt2.c
|
||||
*
|
||||
* Interface definition for the MI0283QT-2 LCD from Multi-Inno Technology Co., Ltd.
|
||||
* This LCD is based on the Himax HX8347-D LCD controller.
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Authors: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Included Files
|
||||
**************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <errno.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
#include <nuttx/lcd/lcd.h>
|
||||
#include <nuttx/lcd/mio283qt2.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "pic32mx-internal.h"
|
||||
#include "pic32mx-pmp.h"
|
||||
#include "pic32mx7mmb_internal.h"
|
||||
|
||||
#ifdef CONFIG_LCD_MIO283QT2
|
||||
|
||||
/**************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
**************************************************************************************/
|
||||
/* Configuration **********************************************************************/
|
||||
|
||||
#ifndef CONFIG_PIC32MX_PMP
|
||||
# error "CONFIG_PIC32MX_PMP is required to use the LCD"
|
||||
#endif
|
||||
|
||||
/* Define CONFIG_DEBUG_LCD to enable detailed LCD debug output. Verbose debug must
|
||||
* also be enabled.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_DEBUG
|
||||
# undef CONFIG_DEBUG_VERBOSE
|
||||
# undef CONFIG_DEBUG_GRAPHICS
|
||||
# undef CONFIG_DEBUG_LCD
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_DEBUG_VERBOSE
|
||||
# undef CONFIG_DEBUG_LCD
|
||||
#endif
|
||||
|
||||
/* PIC32MX7MMB LCD Hardware Definitions ***********************************************/
|
||||
/* --- ---------------------------------- -------------------- ------------------------
|
||||
* PIN CONFIGURATIONS SIGNAL NAME ON-BOARD CONNECTIONS
|
||||
* (Family Data Sheet Table 1-1) (PIC32MX7 Schematic)
|
||||
* --- ---------------------------------- -------------------- ------------------------
|
||||
* 6 RC1/T2CK LCD_RST TFT display
|
||||
* 43 PMA1/AETXD3/AN14/ERXD2/PMALH/RB14 LCD-CS# TFT display, HDR2 pin 3
|
||||
* 77 OC3/RD2 LCD_BLED LCD backlight LED
|
||||
* 44 PMA0/AETXD2/AN15/CN12/ERXD3/OCFB/ LCD-RS TFT display
|
||||
* PMALL/RB15
|
||||
*
|
||||
* 34 PMA13/AN10/RB10/CVREFOUT LCD-YD TFT display
|
||||
* 35 PMA12/AETXERR/AN11/ERXERR/RB11 LCD-XR TFT display
|
||||
* 41 PMA11/AECRS/AN12/ERXD0/RB12 LCD-YU TFT display
|
||||
* 42 PMA10/AECOL/AN13/ERXD1/RB13 LCD-XL TFT display
|
||||
*
|
||||
* 93 PMD0/RE0 PMPD0 TFT display, HDR1 pin 18
|
||||
* 94 PMD1/RE1 PMPD1 TFT display, HDR1 pin 17
|
||||
* 98 PMD2/RE2 PMPD2 TFT display, HDR1 pin 16
|
||||
* 99 PMD3/RE3 PMPD3 TFT display, HDR1 pin 15
|
||||
* 100 PMD4/RE4 PMPD4 TFT display, HDR1 pin 14
|
||||
* 3 PMD5/RE5 PMPD5 TFT display, HDR1 pin 13
|
||||
* 4 PMD6/RE6 PMPD6 TFT display, HDR1 pin 12
|
||||
* 5 PMD7/RE7 PMPD7 TFT display, HDR1 pin 11
|
||||
* 90 PMD8/C2RX/RG0 PMPD8 TFT display, HDR1 pin 10
|
||||
* 89 PMD9/C2TX/ETXERR/RG1 PMPD9 TFT display, HDR1 pin 9
|
||||
* 88 PMD10/C1TX/ETXD0/RF1 PMPD10 TFT display, HDR1 pin 8
|
||||
* 87 PMD11/C1RX/ETXD1/RF0 PMPD11 TFT display, HDR1 pin 7
|
||||
* 79 PMD12/ETXD2/IC5/RD12 PMPD12 TFT display, HDR1 pin 6
|
||||
* 80 PMD13/CN19/ETXD3/RD13 PMPD13 TFT display, HDR1 pin 5
|
||||
* 83 PMD14/CN15/ETXEN/RD6 PMPD14 TFT display, HDR1 pin 4
|
||||
* 84 PMD15/CN16/ETXCLK/RD7 PMPD15 TFT display, HDR1 pin 3
|
||||
*
|
||||
* 82 CN14/PMRD/RD5 PMPRD
|
||||
* 81 CN13/OC5/PMWR/RD4 PMPWR
|
||||
*/
|
||||
|
||||
/* RC1, Reset -- Low value holds in reset */
|
||||
|
||||
#define GPIO_LCD_RST (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTC|GPIO_PIN1)
|
||||
|
||||
/* RB14, LCD select -- Low value selects LCD */
|
||||
|
||||
#define GPIO_LCD_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTB|GPIO_PIN14)
|
||||
|
||||
/* RD2, Backlight -- Low value turns off */
|
||||
|
||||
#define GPIO_LCD_BLED (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTD|GPIO_PIN2)
|
||||
|
||||
/* RB15, RS -- High values selects data */
|
||||
|
||||
#define GPIO_LCD_RS (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTB|GPIO_PIN15)
|
||||
|
||||
/* Debug ******************************************************************************/
|
||||
|
||||
#ifdef CONFIG_DEBUG_LCD
|
||||
# define lcddbg dbg
|
||||
# define lcdvdbg vdbg
|
||||
#else
|
||||
# define lcddbg(x...)
|
||||
# define lcdvdbg(x...)
|
||||
#endif
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Type Definition
|
||||
**************************************************************************************/
|
||||
|
||||
struct pic32mx7mmb_dev_s
|
||||
{
|
||||
struct mio283qt2_lcd_s dev; /* The externally visible part of the driver */
|
||||
bool rs; /* true=data selected */
|
||||
bool cs; /* true=LCD selected */
|
||||
FAR struct lcd_dev_s *drvr; /* The saved instance of the LCD driver */
|
||||
};
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Function Protototypes
|
||||
**************************************************************************************/
|
||||
/* Low Level LCD access */
|
||||
|
||||
static void pic32mx_select(FAR struct mio283qt2_lcd_s *dev);
|
||||
static void pic32mx_deselect(FAR struct mio283qt2_lcd_s *dev);
|
||||
static void pic32mx_index(FAR struct mio283qt2_lcd_s *dev, uint8_t index);
|
||||
#ifndef CONFIG_MIO283QT2_WRONLY
|
||||
static uint16_t pic32mx_read(FAR struct mio283qt2_lcd_s *dev);
|
||||
#endif
|
||||
static void pic32mx_write(FAR struct mio283qt2_lcd_s *dev, uint16_t data);
|
||||
static void pic32mx_backlight(FAR struct mio283qt2_lcd_s *dev, int power);
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Data
|
||||
**************************************************************************************/
|
||||
|
||||
/* This is the driver state structure (there is no retained state information) */
|
||||
|
||||
static struct pic32mx7mmb_dev_s g_pic32mx7mmb_lcd =
|
||||
{
|
||||
{
|
||||
.select = pic32mx_select,
|
||||
.deselect = pic32mx_deselect,
|
||||
.index = pic32mx_index,
|
||||
#ifndef CONFIG_MIO283QT2_WRONLY
|
||||
.read = pic32mx_read,
|
||||
#endif
|
||||
.write = pic32mx_write,
|
||||
.backlight = pic32mx_backlight
|
||||
}
|
||||
};
|
||||
|
||||
/**************************************************************************************
|
||||
* Private Functions
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_command
|
||||
*
|
||||
* Description:
|
||||
* Configure to write an LCD command
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_command(FAR struct pic32mx7mmb_dev_s *priv)
|
||||
{
|
||||
/* Low selects command */
|
||||
|
||||
if (priv->rs)
|
||||
{
|
||||
pic32mx_gpiowrite(GPIO_LCD_RS, false);
|
||||
priv->rs = false;
|
||||
}
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_data
|
||||
*
|
||||
* Description:
|
||||
* Configure to read or write LCD data
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_data(FAR struct pic32mx7mmb_dev_s *priv)
|
||||
{
|
||||
/* Hi selects data */
|
||||
|
||||
if (!priv->rs)
|
||||
{
|
||||
pic32mx_gpiowrite(GPIO_LCD_RS, true);
|
||||
priv->rs = true;
|
||||
}
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_data
|
||||
*
|
||||
* Description:
|
||||
* Wait until the PMP is no longer busy
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_busywait(void)
|
||||
{
|
||||
while ((getreg32(PIC32MX_PMP_MODE) & PMP_MODE_BUSY) != 0);
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_select
|
||||
*
|
||||
* Description:
|
||||
* Select the LCD device
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_select(FAR struct mio283qt2_lcd_s *dev)
|
||||
{
|
||||
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
|
||||
|
||||
/* CS low selects */
|
||||
|
||||
if (!priv->cs)
|
||||
{
|
||||
pic32mx_gpiowrite(GPIO_LCD_CS, false);
|
||||
priv->cs = true;
|
||||
}
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_deselect
|
||||
*
|
||||
* Description:
|
||||
* De-select the LCD device
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_deselect(FAR struct mio283qt2_lcd_s *dev)
|
||||
{
|
||||
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
|
||||
|
||||
/* CS high de-selects */
|
||||
|
||||
if (priv->cs)
|
||||
{
|
||||
pic32mx_gpiowrite(GPIO_LCD_CS, true);
|
||||
priv->cs = false;
|
||||
}
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_index
|
||||
*
|
||||
* Description:
|
||||
* Set the index register
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_index(FAR struct mio283qt2_lcd_s *dev, uint8_t index)
|
||||
{
|
||||
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
|
||||
|
||||
/* Make sure that the PMP is not busy from the last transaction. Read data is not
|
||||
* available until the busy bit becomes zero.
|
||||
*/
|
||||
|
||||
pic32mx_busywait();
|
||||
|
||||
/* Write the 8-bit command (on the 16-bit data bus) */
|
||||
|
||||
pic32mx_command(priv);
|
||||
putreg16((uint16_t)index, PIC32MX_PMP_DIN);
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_read
|
||||
*
|
||||
* Description:
|
||||
* Read LCD data (GRAM data or register contents)
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
#ifndef CONFIG_MIO283QT2_WRONLY
|
||||
static uint16_t pic32mx_read(FAR struct mio283qt2_lcd_s *dev)
|
||||
{
|
||||
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
|
||||
|
||||
/* Make sure that the PMP is not busy from the last transaction. Read data is not
|
||||
* available until the busy bit becomes zero.
|
||||
*/
|
||||
|
||||
pic32mx_busywait();
|
||||
|
||||
/* Read 16-bits of data */
|
||||
|
||||
pic32mx_data(priv);
|
||||
return getreg16(PIC32MX_PMP_DIN);
|
||||
}
|
||||
#endif
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_write
|
||||
*
|
||||
* Description:
|
||||
* Write LCD data (GRAM data or register contents)
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_write(FAR struct mio283qt2_lcd_s *dev, uint16_t data)
|
||||
{
|
||||
FAR struct pic32mx7mmb_dev_s *priv = (FAR struct pic32mx7mmb_dev_s *)dev;
|
||||
|
||||
/* Make sure that the PMP is not busy from the last transaction */
|
||||
|
||||
pic32mx_busywait();
|
||||
|
||||
/* Write 16-bits of data */
|
||||
|
||||
pic32mx_data(priv);
|
||||
putreg16(data, PIC32MX_PMP_DIN);
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: pic32mx_write
|
||||
*
|
||||
* Description:
|
||||
* Write LCD data (GRAM data or register contents)
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
static void pic32mx_backlight(FAR struct mio283qt2_lcd_s *dev, int power)
|
||||
{
|
||||
/* For now, we just control the backlight as a discrete. Pulse width modulation
|
||||
* would be required to vary the backlight level. A low value turns the backlight
|
||||
* off.
|
||||
*/
|
||||
|
||||
pic32mx_gpiowrite(GPIO_LCD_BLED, power > 0);
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Public Functions
|
||||
**************************************************************************************/
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: up_lcdinitialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize the LCD video hardware. The initial state of the LCD is fully
|
||||
* initialized, display memory cleared, and the LCD ready to use, but with the power
|
||||
* setting at 0 (full off).
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
int up_lcdinitialize(void)
|
||||
{
|
||||
uint32_t regval;
|
||||
|
||||
/* Only initialize the driver once. NOTE: The LCD GPIOs were already configured
|
||||
* by pic32mx_lcdinitialize.
|
||||
*/
|
||||
|
||||
if (!g_pic32mx7mmb_lcd.drvr)
|
||||
{
|
||||
lcdvdbg("Initializing\n");
|
||||
|
||||
/* Hold the LCD in reset (active low) */
|
||||
|
||||
pic32mx_gpiowrite(GPIO_LCD_RST, false);
|
||||
|
||||
/* Configure PMP to support the LCD */
|
||||
|
||||
putreg32(0, PIC32MX_PMP_MODE);
|
||||
putreg32(0, PIC32MX_PMP_AEN);
|
||||
putreg32(0, PIC32MX_PMP_CON);
|
||||
|
||||
/* Set LCD timing values, PMP master mode 2, 16-bit mode, no address
|
||||
* increment, and no interrupts.
|
||||
*/
|
||||
|
||||
regval = (PMP_MODE_WAITE_RD(0) | PMP_MODE_WAITM(3) | PMP_MODE_WAITB_1TPB |
|
||||
PMP_MODE_MODE_MODE2 | PMP_MODE_MODE16 | PMP_MODE_INCM_NONE |
|
||||
PMP_MODE_IRQM_NONE);
|
||||
putreg32(regval, PIC32MX_PMP_MODE);
|
||||
|
||||
/* Enable the PMP for reading and writing */
|
||||
|
||||
regval = (PMP_CON_CSF_ADDR1415 | PMP_CON_PTRDEN | PMP_CON_PTWREN |
|
||||
PMP_CON_ADRMUX_NONE | PMP_CON_ON);
|
||||
putreg32(regval, PIC32MX_PMP_CON);
|
||||
|
||||
/* Bring the LCD out of reset */
|
||||
|
||||
up_mdelay(5);
|
||||
pic32mx_gpiowrite(GPIO_LCD_RST, true);
|
||||
|
||||
/* Configure and enable the LCD */
|
||||
|
||||
up_mdelay(50);
|
||||
g_pic32mx7mmb_lcd.drvr = mio283qt2_lcdinitialize(&g_pic32mx7mmb_lcd.dev);
|
||||
if (!g_pic32mx7mmb_lcd.drvr)
|
||||
{
|
||||
lcddbg("ERROR: mio283qt2_lcdinitialize failed\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
}
|
||||
|
||||
/* Clear the display (setting it to the color 0=black) */
|
||||
|
||||
#if 0 /* Already done in the driver */
|
||||
mio283qt2_clear(g_pic32mx7mmb_lcd.drvr, 0);
|
||||
#endif
|
||||
|
||||
/* Turn the display off */
|
||||
|
||||
g_pic32mx7mmb_lcd.drvr->setpower(g_pic32mx7mmb_lcd.drvr, 0);
|
||||
return OK;
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: up_lcdgetdev
|
||||
*
|
||||
* Description:
|
||||
* Return a a reference to the LCD object for the specified LCD. This allows support
|
||||
* for multiple LCD devices.
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
FAR struct lcd_dev_s *up_lcdgetdev(int lcddev)
|
||||
{
|
||||
DEBUGASSERT(lcddev == 0);
|
||||
return g_pic32mx7mmb_lcd.drvr;
|
||||
}
|
||||
|
||||
/**************************************************************************************
|
||||
* Name: up_lcduninitialize
|
||||
*
|
||||
* Description:
|
||||
* Unitialize the LCD support
|
||||
*
|
||||
**************************************************************************************/
|
||||
|
||||
void up_lcduninitialize(void)
|
||||
{
|
||||
/* Turn the display off */
|
||||
|
||||
g_pic32mx7mmb_lcd.drvr->setpower(g_pic32mx7mmb_lcd.drvr, 0);
|
||||
}
|
||||
|
||||
#endif /* CONFIG_LCD_MIO283QT2 */
|
||||
|
||||
/****************************************************************************
|
||||
* Name: pic32mx_lcdinitialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize the LCD. This function should be called early in the boot
|
||||
* sequendce -- Even if the LCD is not enabled. In that case we should
|
||||
* at a minimum at least disable the LCD backlight.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void pic32mx_lcdinitialize(void)
|
||||
{
|
||||
/* Configure all LCD discrete controls. LCD will be left in this state:
|
||||
* 1. Held in reset,
|
||||
* 2. Not selected,
|
||||
* 3. Backlight off,
|
||||
* 4. Command selected.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_LCD_MIO283QT2
|
||||
pic32mx_configgpio(GPIO_LCD_RST);
|
||||
pic32mx_configgpio(GPIO_LCD_CS);
|
||||
pic32mx_configgpio(GPIO_LCD_BLED);
|
||||
pic32mx_configgpio(GPIO_LCD_RS);
|
||||
|
||||
#else
|
||||
/* Just configure the backlight control as an output and turn off the
|
||||
* backlight for now.
|
||||
*/
|
||||
|
||||
pic32mx_configgpio(GPIO_LCD_BLED);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user