sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

functions and definitions renamed from lm_ to tiva_

Browse Source
This commit is contained in:
Gregory Nutt 2014-03-08 15:50:26 -06:00
parent b730d32e43
commit a410e3beff
40 changed files with 718 additions and 514 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
configs/eagle100/README.txt
View File

@ -297,15 +297,15 @@ Eagle100-specific Configuration Options
Additional interrupt support can be disabled if desired to reduce memory
footprint.
CONFIG_LM_DISABLE_GPIOA_IRQS=n
CONFIG_LM_DISABLE_GPIOB_IRQS=n
CONFIG_LM_DISABLE_GPIOC_IRQS=n
CONFIG_LM_DISABLE_GPIOD_IRQS=n
CONFIG_LM_DISABLE_GPIOE_IRQS=n
CONFIG_LM_DISABLE_GPIOF_IRQS=n
CONFIG_LM_DISABLE_GPIOG_IRQS=n
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
CONFIG_TIVA_DISABLE_GPIOA_IRQS=n
CONFIG_TIVA_DISABLE_GPIOB_IRQS=n
CONFIG_TIVA_DISABLE_GPIOC_IRQS=n
CONFIG_TIVA_DISABLE_GPIOD_IRQS=n
CONFIG_TIVA_DISABLE_GPIOE_IRQS=n
CONFIG_TIVA_DISABLE_GPIOF_IRQS=n
CONFIG_TIVA_DISABLE_GPIOG_IRQS=n
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
LM3S6918 specific device driver settings
@ -330,18 +330,18 @@ Eagle100-specific Configuration Options
value is large, then larger values of this setting may cause
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET)
CONFIG_TIVA_ETHERNET - This must be set (along with CONFIG_NET)
to build the Stellaris Ethernet driver
CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_LM_BOARDMAC - If the board-specific logic can provide
CONFIG_TIVA_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_TIVA_BOARDMAC - If the board-specific logic can provide
a MAC address (via tiva_ethernetmac()), then this should be selected.
CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation
CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_LM_ETHNOPAD - Set to suppress Tx padding
CONFIG_LM_MULTICAST - Set to enable multicast frames
CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_LM_BADCRC - Set to enable bad CRC rejection.
CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console.
CONFIG_TIVA_ETHHDUPLEX - Set to force half duplex operation
CONFIG_TIVA_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_TIVA_ETHNOPAD - Set to suppress Tx padding
CONFIG_TIVA_MULTICAST - Set to enable multicast frames
CONFIG_TIVA_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_TIVA_BADCRC - Set to enable bad CRC rejection.
CONFIG_TIVA_DUMPPACKET - Dump each packet received/sent to the console.
Configurations
^^^^^^^^^^^^^^

48
configs/eagle100/httpd/defconfig
View File

@ -127,45 +127,45 @@ CONFIG_ARCH_CHIP_LM3S6918=y
# CONFIG_ARCH_CHIP_LM3S8962 is not set
# CONFIG_ARCH_CHIP_LM4F120 is not set
CONFIG_ARCH_CHIP_LM3S=y
CONFIG_LM_HAVE_SSI1=y
CONFIG_TIVA_HAVE_SSI1=y
# CONFIG_LM_REVA2 is not set
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
CONFIG_LM_ETHERNET=y
# CONFIG_LM_FLASH is not set
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
# CONFIG_LM_DISABLE_GPIOH_IRQS is not set
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOH_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
CONFIG_LM_BOARDMAC=y
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
CONFIG_TIVA_BOARDMAC=y
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#

10
configs/eagle100/include/board.h
View File

@ -63,7 +63,7 @@
* of (400 / 2) / 4 = 50MHz
*/
#define LM_SYSDIV 4
#define TIVA_SYSDIV 4
#define SYSCLK_FREQUENCY 50000000 /* 50MHz */
/* Other RCC settings:
@ -74,7 +74,7 @@
* - No auto-clock gating reset
*/
#define LM_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM_SYSDIV))
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
/* RCC2 settings -- RCC2 not used. Other RCC2 settings
*
@ -83,7 +83,7 @@
* - Not using RCC2
*/
#define LM_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(LM_SYSDIV))
#define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(TIVA_SYSDIV))
/* LED definitions ******************************************************************/
@ -128,12 +128,12 @@ void tiva_boardinitialize(void);
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif

48
configs/eagle100/nettest/defconfig
View File

@ -150,45 +150,45 @@ CONFIG_ARCH_CHIP_LM3S6918=y
# CONFIG_ARCH_CHIP_LM3S8962 is not set
# CONFIG_ARCH_CHIP_LM4F120 is not set
CONFIG_ARCH_CHIP_LM3S=y
CONFIG_LM_HAVE_SSI1=y
CONFIG_TIVA_HAVE_SSI1=y
# CONFIG_LM_REVA2 is not set
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
CONFIG_LM_ETHERNET=y
# CONFIG_LM_FLASH is not set
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
# CONFIG_LM_DISABLE_GPIOH_IRQS is not set
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOH_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
CONFIG_LM_BOARDMAC=y
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
CONFIG_TIVA_BOARDMAC=y
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#

48
configs/eagle100/nsh/defconfig
View File

@ -127,45 +127,45 @@ CONFIG_ARCH_CHIP_LM3S6918=y
# CONFIG_ARCH_CHIP_LM3S8962 is not set
# CONFIG_ARCH_CHIP_LM4F120 is not set
CONFIG_ARCH_CHIP_LM3S=y
CONFIG_LM_HAVE_SSI1=y
CONFIG_TIVA_HAVE_SSI1=y
# CONFIG_LM_REVA2 is not set
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
CONFIG_LM_ETHERNET=y
# CONFIG_LM_FLASH is not set
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
# CONFIG_LM_DISABLE_GPIOH_IRQS is not set
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOH_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
CONFIG_LM_BOARDMAC=y
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
CONFIG_TIVA_BOARDMAC=y
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#

30
configs/eagle100/nxflat/defconfig
View File

@ -127,32 +127,32 @@ CONFIG_ARCH_CHIP_LM3S6918=y
# CONFIG_ARCH_CHIP_LM3S8962 is not set
# CONFIG_ARCH_CHIP_LM4F120 is not set
CONFIG_ARCH_CHIP_LM3S=y
CONFIG_LM_HAVE_SSI1=y
CONFIG_TIVA_HAVE_SSI1=y
# CONFIG_LM_REVA2 is not set
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
# CONFIG_LM_ETHERNET is not set
# CONFIG_LM_FLASH is not set
# CONFIG_TIVA_ETHERNET is not set
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
# CONFIG_LM_DISABLE_GPIOH_IRQS is not set
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOH_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris SSI Configuration

4
configs/eagle100/src/eagle100_internal.h
View File

@ -56,12 +56,12 @@
* expanded).
*/
#if LM_NSSI == 0
#if TIVA_NSSI == 0
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#elif LM_NSSI == 1
#elif TIVA_NSSI == 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#endif

8
configs/eagle100/src/up_ethernet.c
View File

@ -67,12 +67,12 @@
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
void tiva_ethernetmac(struct ether_addr *ethaddr)
{
uint32_t user0;
@ -80,8 +80,8 @@ void tiva_ethernetmac(struct ether_addr *ethaddr)
/* Get the current value of the user registers */
user0 = getreg32(LM_FLASH_USERREG0);
user1 = getreg32(LM_FLASH_USERREG1);
user0 = getreg32(TIVA_FLASH_USERREG0);
user1 = getreg32(TIVA_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);

48
configs/eagle100/thttpd/defconfig
View File

@ -120,45 +120,45 @@ CONFIG_ARCH_CHIP_LM3S6918=y
# CONFIG_ARCH_CHIP_LM3S8962 is not set
# CONFIG_ARCH_CHIP_LM4F120 is not set
CONFIG_ARCH_CHIP_LM3S=y
CONFIG_LM_HAVE_SSI1=y
CONFIG_TIVA_HAVE_SSI1=y
# CONFIG_LM_REVA2 is not set
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
CONFIG_LM_ETHERNET=y
# CONFIG_LM_FLASH is not set
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
# CONFIG_LM_DISABLE_GPIOH_IRQS is not set
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOH_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
CONFIG_LM_BOARDMAC=y
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
CONFIG_TIVA_BOARDMAC=y
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#

38
configs/ekk-lm3s9b96/README.txt
View File

@ -352,15 +352,15 @@ Stellaris EKK-LM3S9B96 Evaluation Kit Configuration Options
Additional interrupt support can be disabled if desired to reduce memory
footprint.
CONFIG_LM_DISABLE_GPIOA_IRQS=n
CONFIG_LM_DISABLE_GPIOB_IRQS=n
CONFIG_LM_DISABLE_GPIOC_IRQS=n
CONFIG_LM_DISABLE_GPIOD_IRQS=n
CONFIG_LM_DISABLE_GPIOE_IRQS=n
CONFIG_LM_DISABLE_GPIOF_IRQS=n
CONFIG_LM_DISABLE_GPIOG_IRQS=n
CONFIG_LM_DISABLE_GPIOH_IRQS=n
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
CONFIG_TIVA_DISABLE_GPIOA_IRQS=n
CONFIG_TIVA_DISABLE_GPIOB_IRQS=n
CONFIG_TIVA_DISABLE_GPIOC_IRQS=n
CONFIG_TIVA_DISABLE_GPIOD_IRQS=n
CONFIG_TIVA_DISABLE_GPIOE_IRQS=n
CONFIG_TIVA_DISABLE_GPIOF_IRQS=n
CONFIG_TIVA_DISABLE_GPIOG_IRQS=n
CONFIG_TIVA_DISABLE_GPIOH_IRQS=n
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
LM3S9B96 specific device driver settings
@ -385,18 +385,18 @@ Stellaris EKK-LM3S9B96 Evaluation Kit Configuration Options
value is large, then larger values of this setting may cause
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET)
CONFIG_TIVA_ETHERNET - This must be set (along with CONFIG_NET)
to build the Stellaris Ethernet driver
CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_LM_BOARDMAC - If the board-specific logic can provide
CONFIG_TIVA_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_TIVA_BOARDMAC - If the board-specific logic can provide
a MAC address (via tiva_ethernetmac()), then this should be selected.
CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation
CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_LM_ETHNOPAD - Set to suppress Tx padding
CONFIG_LM_MULTICAST - Set to enable multicast frames
CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_LM_BADCRC - Set to enable bad CRC rejection.
CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console.
CONFIG_TIVA_ETHHDUPLEX - Set to force half duplex operation
CONFIG_TIVA_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_TIVA_ETHNOPAD - Set to suppress Tx padding
CONFIG_TIVA_MULTICAST - Set to enable multicast frames
CONFIG_TIVA_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_TIVA_BADCRC - Set to enable bad CRC rejection.
CONFIG_TIVA_DUMPPACKET - Dump each packet received/sent to the console.
Configurations
^^^^^^^^^^^^^^

10
configs/ekk-lm3s9b96/include/board.h
View File

@ -64,7 +64,7 @@
* of (400 / 2) / 4 = 50MHz
*/
#define LM_SYSDIV 4
#define TIVA_SYSDIV 4
#define SYSCLK_FREQUENCY 50000000 /* 50MHz */
/* Other RCC settings:
@ -75,7 +75,7 @@
* - No auto-clock gating reset
*/
#define LM_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM_SYSDIV))
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
/* RCC2 settings -- RCC2 not used. Other RCC2 settings
*
@ -84,7 +84,7 @@
* - Not using RCC2
*/
#define LM_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(LM_SYSDIV))
#define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(TIVA_SYSDIV))
/* LED definitions ******************************************************************/
@ -129,12 +129,12 @@ void tiva_boardinitialize(void);
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif

288
configs/ekk-lm3s9b96/nsh/defconfig
View File

@ -7,6 +7,7 @@
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
# CONFIG_DEFAULT_SMALL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
@ -29,6 +30,7 @@ CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDINT_H is not set
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
@ -38,7 +40,13 @@ CONFIG_RAW_BINARY=y
# Debug Options
#
# CONFIG_DEBUG is not set
CONFIG_ARCH_HAVE_STACKCHECK=y
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
# CONFIG_DEBUG_SYMBOLS is not set
CONFIG_ARCH_HAVE_CUSTOMOPT=y
# CONFIG_DEBUG_NOOPT is not set
# CONFIG_DEBUG_CUSTOMOPT is not set
CONFIG_DEBUG_FULLOPT=y
#
# System Type
@ -59,29 +67,42 @@ CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_A1X is not set
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
CONFIG_ARCH_CHIP_LM=y
# CONFIG_ARCH_CHIP_TIVA is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
# CONFIG_ARCH_CHIP_SAMA5 is not set
# CONFIG_ARCH_CHIP_SAMD is not set
# CONFIG_ARCH_CHIP_SAM34 is not set
# CONFIG_ARCH_CHIP_STM32 is not set
# CONFIG_ARCH_CHIP_STR71X is not set
# CONFIG_ARCH_ARM7TDMI is not set
# CONFIG_ARCH_ARM926EJS is not set
# CONFIG_ARCH_ARM920T is not set
# CONFIG_ARCH_CORTEXM0 is not set
CONFIG_ARCH_CORTEXM3=y
# CONFIG_ARCH_CORTEXM4 is not set
# CONFIG_ARCH_CORTEXA5 is not set
# CONFIG_ARCH_CORTEXA8 is not set
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="tiva"
# CONFIG_ARMV7M_USEBASEPRI is not set
# CONFIG_ARCH_HAVE_MPU is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_HAVE_FPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
CONFIG_BOARD_LOOPSPERMSEC=4531
# CONFIG_ARCH_CALIBRATION is not set
#
# ARMV7M Configuration Options
@ -93,79 +114,89 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#
# Stellaris Configuration Options
# Tiva/Stellaris Configuration Options
#
# CONFIG_ARCH_CHIP_LM3S6918 is not set
CONFIG_ARCH_CHIP_LM3S9B96=y
# CONFIG_ARCH_CHIP_LM3S6432 is not set
# CONFIG_ARCH_CHIP_LM3S6965 is not set
# CONFIG_ARCH_CHIP_LM3S8962 is not set
# CONFIG_ARCH_CHIP_LM4F120 is not set
CONFIG_ARCH_CHIP_LM3S=y
# CONFIG_LM_REVA2 is not set
#
# Stellaris Peripheral Support
# Tiva/Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
CONFIG_SSI0_DISABLE=y
CONFIG_SSI1_DISABLE=y
# CONFIG_LM_UART2 is not set
CONFIG_LM_ETHERNET=y
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
# Tiva/Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
# CONFIG_LM_BOARDMAC is not set
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
# CONFIG_TIVA_BOARDMAC is not set
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
# CONFIG_NET_MULTICAST is not set
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_HAVE_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
# CONFIG_ARCH_HAVE_MMU is not set
# CONFIG_ARCH_NAND_HWECC is not set
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_IDLE_CUSTOM is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=98304
CONFIG_BOARD_LOOPSPERMSEC=4531
# CONFIG_ARCH_CALIBRATION is not set
#
# Interrupt options
#
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
# CONFIG_ARCH_HIPRI_INTERRUPT is not set
#
# Boot options
@ -176,6 +207,13 @@ CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Boot Memory Configuration
#
CONFIG_RAM_START=0x20000000
CONFIG_RAM_SIZE=98304
# CONFIG_ARCH_HAVE_SDRAM is not set
#
# Board Selection
#
@ -201,7 +239,9 @@ CONFIG_NSH_MMCSDSPIPORTNO=0
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
# CONFIG_SYSTEM_TIME64 is not set
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
@ -215,7 +255,6 @@ CONFIG_DEV_CONSOLE=y
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_SCHED_WAITPID is not set
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
@ -269,15 +308,21 @@ CONFIG_DEV_NULL=y
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
# CONFIG_PWM is not set
# CONFIG_ARCH_HAVE_I2CRESET is not set
# CONFIG_I2C is not set
CONFIG_SPI=y
# CONFIG_SPI_OWNBUS is not set
CONFIG_SPI_EXCHANGE=y
# CONFIG_SPI_CMDDATA is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_I2S is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_VIDEO_DEVICES is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
@ -289,10 +334,25 @@ CONFIG_MMCSD_MMCSUPPORT=y
CONFIG_MMCSD_HAVECARDDETECT=y
CONFIG_MMCSD_SPI=y
CONFIG_MMCSD_SPICLOCK=20000000
# CONFIG_MMCSD_SDIO is not set
CONFIG_MMCSD_SPIMODE=0
# CONFIG_ARCH_HAVE_SDIO is not set
# CONFIG_MTD is not set
# CONFIG_NETDEVICES is not set
CONFIG_NETDEVICES=y
#
# General Ethernet MAC Driver Options
#
# CONFIG_NETDEV_MULTINIC is not set
#
# External Ethernet MAC Device Support
#
# CONFIG_NET_DM90x0 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_NET_E1000 is not set
# CONFIG_NET_SLIP is not set
# CONFIG_NET_VNET is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
@ -301,7 +361,31 @@ CONFIG_MMCSD_SPICLOCK=20000000
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
# CONFIG_ARCH_HAVE_UART is not set
CONFIG_ARCH_HAVE_UART0=y
# CONFIG_ARCH_HAVE_UART1 is not set
# CONFIG_ARCH_HAVE_UART2 is not set
# CONFIG_ARCH_HAVE_UART3 is not set
# CONFIG_ARCH_HAVE_UART4 is not set
# CONFIG_ARCH_HAVE_UART5 is not set
# CONFIG_ARCH_HAVE_UART6 is not set
# CONFIG_ARCH_HAVE_UART7 is not set
# CONFIG_ARCH_HAVE_UART8 is not set
# CONFIG_ARCH_HAVE_SCI0 is not set
# CONFIG_ARCH_HAVE_SCI1 is not set
# CONFIG_ARCH_HAVE_USART0 is not set
# CONFIG_ARCH_HAVE_USART1 is not set
# CONFIG_ARCH_HAVE_USART2 is not set
# CONFIG_ARCH_HAVE_USART3 is not set
# CONFIG_ARCH_HAVE_USART4 is not set
# CONFIG_ARCH_HAVE_USART5 is not set
# CONFIG_ARCH_HAVE_USART6 is not set
# CONFIG_ARCH_HAVE_USART7 is not set
# CONFIG_ARCH_HAVE_USART8 is not set
#
# USART Configuration
#
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_UART0_SERIAL_CONSOLE=y
@ -316,6 +400,10 @@ CONFIG_UART0_BAUD=115200
CONFIG_UART0_BITS=8
CONFIG_UART0_PARITY=0
CONFIG_UART0_2STOP=0
# CONFIG_UART0_IFLOWCONTROL is not set
# CONFIG_UART0_OFLOWCONTROL is not set
# CONFIG_SERIAL_IFLOWCONTROL is not set
# CONFIG_SERIAL_OFLOWCONTROL is not set
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
@ -332,13 +420,16 @@ CONFIG_UART0_2STOP=0
#
# Networking Support
#
CONFIG_ARCH_HAVE_NET=y
# CONFIG_ARCH_HAVE_PHY is not set
CONFIG_NET=y
# CONFIG_NET_NOINTS is not set
# CONFIG_NET_MULTIBUFFER is not set
# CONFIG_NET_IPv6 is not set
# CONFIG_NET_PROMISCUOUS is not set
CONFIG_NSOCKET_DESCRIPTORS=40
CONFIG_NET_NACTIVESOCKETS=16
CONFIG_NET_SOCKOPTS=y
# CONFIG_NET_SOLINGER is not set
CONFIG_NET_BUFSIZE=562
# CONFIG_NET_TCPURGDATA is not set
@ -351,9 +442,11 @@ CONFIG_NET_MAX_LISTENPORTS=8
CONFIG_NET_TCP_READAHEAD=y
CONFIG_NET_TCP_READAHEAD_BUFSIZE=536
CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
# CONFIG_NET_TCP_WRITE_BUFFERS is not set
CONFIG_NET_TCP_RECVDELAY=0
# CONFIG_NET_TCPBACKLOG is not set
# CONFIG_NET_TCP_SPLIT is not set
# CONFIG_NET_SENDFILE is not set
#
# UDP Networking
@ -362,6 +455,7 @@ CONFIG_NET_UDP=y
CONFIG_NET_UDP_CHECKSUMS=y
CONFIG_NET_UDP_CONNS=8
# CONFIG_NET_BROADCAST is not set
# CONFIG_NET_RXAVAIL is not set
CONFIG_NET_ICMP=y
CONFIG_NET_ICMP_PING=y
# CONFIG_NET_PINGADDRCONF is not set
@ -370,6 +464,7 @@ CONFIG_NET_STATISTICS=y
CONFIG_NET_RECEIVE_WINDOW=536
CONFIG_NET_ARPTAB_SIZE=16
# CONFIG_NET_ARP_IPIN is not set
# CONFIG_NET_ROUTE is not set
#
# File Systems
@ -379,6 +474,9 @@ CONFIG_NET_ARPTAB_SIZE=16
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
CONFIG_FS_READABLE=y
CONFIG_FS_WRITABLE=y
# CONFIG_FS_RAMMAP is not set
CONFIG_FS_FAT=y
# CONFIG_FAT_LCNAMES is not set
@ -389,6 +487,8 @@ CONFIG_NFS=y
# CONFIG_NFS_STATISTICS is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
# CONFIG_FS_PROCFS is not set
#
# System Logging
@ -404,10 +504,17 @@ CONFIG_NFS=y
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=1
# CONFIG_ARCH_HAVE_HEAP2 is not set
# CONFIG_GRAN is not set
#
# Audio Support
#
# CONFIG_AUDIO is not set
#
# Binary Formats
#
@ -433,6 +540,7 @@ CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
@ -448,9 +556,11 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Helper Functions
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
# CONFIG_LIB_SLCDCODEC is not set
#
# Basic CXX Support
@ -471,7 +581,7 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_SYSTEM_COMPOSITE is not set
# CONFIG_EXAMPLES_CONFIGDATA is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
@ -484,9 +594,10 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_NETTEST is not set
# CONFIG_EXAMPLES_NRF24L01TERM is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
@ -507,6 +618,9 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SLCD is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TCPECHO is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
@ -515,14 +629,14 @@ CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_DISCOVER is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_SYSTEM_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
# CONFIG_EXAMPLES_WGET is not set
#
# Interpreters
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
@ -538,14 +652,10 @@ CONFIG_EXAMPLES_NSH=y
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
CONFIG_NETUTILS_DHCPC=y
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
CONFIG_NETUTILS_RESOLV=y
CONFIG_NET_RESOLV_ENTRIES=4
CONFIG_NET_RESOLV_MAXRESPONSE=96
# CONFIG_NETUTILS_SMTP is not set
CONFIG_NETUTILS_TELNETD=y
CONFIG_NETUTILS_TFTPC=y
@ -558,11 +668,7 @@ CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
# CONFIG_NETUTILS_XMLRPC is not set
#
# ModBus
#
#
# FreeModbus
# FreeModBus
#
# CONFIG_MODBUS is not set
@ -576,10 +682,14 @@ CONFIG_NSH_READLINE=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_ADDROUTE is not set
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_CMP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_DELROUTE is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
@ -615,11 +725,24 @@ CONFIG_NSH_READLINE=y
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
#
# Configure Command Options
#
CONFIG_NSH_CMDOPT_DF_H=y
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_CMDOPT_HEXDUMP=y
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=64
# CONFIG_NSH_DISABLE_SEMICOLON is not set
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_TMPDIR="/tmp"
CONFIG_NSH_MAXARGUMENTS=6
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
@ -647,7 +770,20 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
#
#
# System NSH Add-Ons
# Platform-specific Support
#
# CONFIG_PLATFORM_CONFIGDATA is not set
#
# System Libraries and NSH Add-Ons
#
#
# USB CDC/ACM Device Commands
#
#
# USB Composite Device Commands
#
#
@ -659,11 +795,30 @@ CONFIG_NSH_MAX_ROUNDTRIP=20
# I2C tool
#
#
# INI File Parser
#
# CONFIG_SYSTEM_INIFILE is not set
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# NxPlayer media player library / command Line
#
# CONFIG_SYSTEM_NXPLAYER is not set
#
# RAM test
#
# CONFIG_SYSTEM_RAMTEST is not set
#
# readline()
#
@ -693,3 +848,26 @@ CONFIG_READLINE_ECHO=y
#
# USB Monitor
#
#
# EMACS-like Command Line Editor
#
# CONFIG_SYSTEM_CLE is not set
#
# VI Work-Alike Editor
#
# CONFIG_SYSTEM_VI is not set
#
# Stack Monitor
#
#
# USB Mass Storage Device Commands
#
#
# Zmodem Commands
#
# CONFIG_SYSTEM_ZMODEM is not set

3
configs/ekk-lm3s9b96/nsh/setenv.sh
View File

@ -51,7 +51,8 @@ fi
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.

4
configs/ekk-lm3s9b96/src/ekklm3s9b96_internal.h
View File

@ -57,12 +57,12 @@
* expanded).
*/
#if LM_NSSI == 0
#if TIVA_NSSI == 0
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#elif LM_NSSI == 1
#elif TIVA_NSSI == 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#endif

8
configs/ekk-lm3s9b96/src/up_ethernet.c
View File

@ -68,12 +68,12 @@
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
void tiva_ethernetmac(struct ether_addr *ethaddr)
{
uint32_t user0;
@ -81,8 +81,8 @@ void tiva_ethernetmac(struct ether_addr *ethaddr)
/* Get the current value of the user registers */
user0 = getreg32(LM_FLASH_USERREG0);
user1 = getreg32(LM_FLASH_USERREG1);
user0 = getreg32(TIVA_FLASH_USERREG0);
user1 = getreg32(TIVA_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);

38
configs/lm3s6432-s2e/README.txt
View File

@ -346,15 +346,15 @@ Stellaris MDL-S2E Reference Design Configuration Options
Additional interrupt support can be disabled if desired to reduce memory
footprint - GPIOs C-G are not pinned out on the MDL-S2E board.
CONFIG_LM_DISABLE_GPIOA_IRQS=n
CONFIG_LM_DISABLE_GPIOB_IRQS=n
CONFIG_LM_DISABLE_GPIOC_IRQS=y
CONFIG_LM_DISABLE_GPIOD_IRQS=y
CONFIG_LM_DISABLE_GPIOE_IRQS=y
CONFIG_LM_DISABLE_GPIOF_IRQS=y
CONFIG_LM_DISABLE_GPIOG_IRQS=y
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
CONFIG_TIVA_DISABLE_GPIOA_IRQS=n
CONFIG_TIVA_DISABLE_GPIOB_IRQS=n
CONFIG_TIVA_DISABLE_GPIOC_IRQS=y
CONFIG_TIVA_DISABLE_GPIOD_IRQS=y
CONFIG_TIVA_DISABLE_GPIOE_IRQS=y
CONFIG_TIVA_DISABLE_GPIOF_IRQS=y
CONFIG_TIVA_DISABLE_GPIOG_IRQS=y
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
LM3S6432 specific device driver settings
@ -388,18 +388,18 @@ Stellaris MDL-S2E Reference Design Configuration Options
value is large, then larger values of this setting may cause
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET)
CONFIG_TIVA_ETHERNET - This must be set (along with CONFIG_NET)
to build the Stellaris Ethernet driver
CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_LM_BOARDMAC - This should be set in order to use the
CONFIG_TIVA_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_TIVA_BOARDMAC - This should be set in order to use the
MAC address configured in the flash USER registers.
CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation
CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_LM_ETHNOPAD - Set to suppress Tx padding
CONFIG_LM_MULTICAST - Set to enable multicast frames
CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_LM_BADCRC - Set to enable bad CRC rejection.
CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console.
CONFIG_TIVA_ETHHDUPLEX - Set to force half duplex operation
CONFIG_TIVA_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_TIVA_ETHNOPAD - Set to suppress Tx padding
CONFIG_TIVA_MULTICAST - Set to enable multicast frames
CONFIG_TIVA_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_TIVA_BADCRC - Set to enable bad CRC rejection.
CONFIG_TIVA_DUMPPACKET - Dump each packet received/sent to the console.
Configurations
^^^^^^^^^^^^^^

14
configs/lm3s6432-s2e/include/board.h
View File

@ -63,7 +63,7 @@
* of (400 / 2) / 4 = 50MHz
*/
#define LM_SYSDIV 4
#define TIVA_SYSDIV 4
#define SYSCLK_FREQUENCY 50000000 /* 50MHz */
/* Other RCC settings:
@ -74,7 +74,7 @@
* - No auto-clock gating reset
*/
#define LM_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM_SYSDIV))
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
/* RCC2 settings -- RCC2 not used. Other RCC2 settings
*
@ -83,7 +83,7 @@
* - Not using RCC2
*/
#define LM_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(LM_SYSDIV))
#define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(TIVA_SYSDIV))
/* LED definitions ******************************************************************/
@ -123,21 +123,21 @@
*
************************************************************************************/
extern void tiva_boardinitialize(void);
void tiva_boardinitialize(void);
/************************************************************************************
* Name: tiva_ethernetmac
*
* Description:
* For the MDL-S2E Reference Design, the MAC address will be stored in the
* non-volatile USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined,
* non-volatile USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined,
* this function will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
extern void tiva_ethernetmac(struct ether_addr *ethaddr);
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif
#endif /* __ASSEMBLY__ */

46
configs/lm3s6432-s2e/nsh/defconfig
View File

@ -123,39 +123,39 @@ CONFIG_ARCH_CHIP_LM3S=y
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
CONFIG_LM_UART1=y
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
CONFIG_TIVA_UART1=y
# CONFIG_TIVA_UART2 is not set
CONFIG_SSI0_DISABLE=y
CONFIG_SSI1_DISABLE=y
CONFIG_LM_ETHERNET=y
# CONFIG_LM_FLASH is not set
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
CONFIG_LM_DISABLE_GPIOC_IRQS=y
CONFIG_LM_DISABLE_GPIOD_IRQS=y
CONFIG_LM_DISABLE_GPIOE_IRQS=y
CONFIG_LM_DISABLE_GPIOF_IRQS=y
CONFIG_LM_DISABLE_GPIOG_IRQS=y
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOC_IRQS=y
CONFIG_TIVA_DISABLE_GPIOD_IRQS=y
CONFIG_TIVA_DISABLE_GPIOE_IRQS=y
CONFIG_TIVA_DISABLE_GPIOF_IRQS=y
CONFIG_TIVA_DISABLE_GPIOG_IRQS=y
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
CONFIG_LM_BOARDMAC=y
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
CONFIG_TIVA_BOARDMAC=y
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
# CONFIG_NET_MULTICAST is not set

2
configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h
View File

@ -55,7 +55,7 @@
* expanded).
*/
#if LM_NSSI == 0
#if TIVA_NSSI == 0
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
#endif

2
configs/lm3s6432-s2e/src/up_boot.c
View File

@ -54,7 +54,7 @@
* Definitions
************************************************************************************/
#if defined(CONFIG_LM_UART1) && !defined(CONFIG_SSI0_DISABLE)
#if defined(CONFIG_TIVA_UART1) && !defined(CONFIG_SSI0_DISABLE)
# error Only one of UART1 and SSI0 can be enabled on this board.
#endif

8
configs/lm3s6432-s2e/src/up_ethernet.c
View File

@ -67,12 +67,12 @@
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
void tiva_ethernetmac(struct ether_addr *ethaddr)
{
uint32_t user0;
@ -80,8 +80,8 @@ void tiva_ethernetmac(struct ether_addr *ethaddr)
/* Get the current value of the user registers */
user0 = getreg32(LM_FLASH_USERREG0);
user1 = getreg32(LM_FLASH_USERREG1);
user0 = getreg32(TIVA_FLASH_USERREG0);
user1 = getreg32(TIVA_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);

38
configs/lm3s6965-ek/README.txt
View File

@ -495,15 +495,15 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options
Additional interrupt support can be disabled if desired to reduce memory
footprint.
CONFIG_LM_DISABLE_GPIOA_IRQS=n
CONFIG_LM_DISABLE_GPIOB_IRQS=n
CONFIG_LM_DISABLE_GPIOC_IRQS=n
CONFIG_LM_DISABLE_GPIOD_IRQS=n
CONFIG_LM_DISABLE_GPIOE_IRQS=n
CONFIG_LM_DISABLE_GPIOF_IRQS=n
CONFIG_LM_DISABLE_GPIOG_IRQS=n
CONFIG_LM_DISABLE_GPIOH_IRQS=n
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
CONFIG_TIVA_DISABLE_GPIOA_IRQS=n
CONFIG_TIVA_DISABLE_GPIOB_IRQS=n
CONFIG_TIVA_DISABLE_GPIOC_IRQS=n
CONFIG_TIVA_DISABLE_GPIOD_IRQS=n
CONFIG_TIVA_DISABLE_GPIOE_IRQS=n
CONFIG_TIVA_DISABLE_GPIOF_IRQS=n
CONFIG_TIVA_DISABLE_GPIOG_IRQS=n
CONFIG_TIVA_DISABLE_GPIOH_IRQS=n
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
LM3S6965 specific device driver settings
@ -528,18 +528,18 @@ Stellaris LM3S6965 Evaluation Kit Configuration Options
value is large, then larger values of this setting may cause
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET)
CONFIG_TIVA_ETHERNET - This must be set (along with CONFIG_NET)
to build the Stellaris Ethernet driver
CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_LM_BOARDMAC - If the board-specific logic can provide
CONFIG_TIVA_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_TIVA_BOARDMAC - If the board-specific logic can provide
a MAC address (via tiva_ethernetmac()), then this should be selected.
CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation
CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_LM_ETHNOPAD - Set to suppress Tx padding
CONFIG_LM_MULTICAST - Set to enable multicast frames
CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_LM_BADCRC - Set to enable bad CRC rejection.
CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console.
CONFIG_TIVA_ETHHDUPLEX - Set to force half duplex operation
CONFIG_TIVA_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_TIVA_ETHNOPAD - Set to suppress Tx padding
CONFIG_TIVA_MULTICAST - Set to enable multicast frames
CONFIG_TIVA_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_TIVA_BADCRC - Set to enable bad CRC rejection.
CONFIG_TIVA_DUMPPACKET - Dump each packet received/sent to the console.
Configurations
^^^^^^^^^^^^^^

44
configs/lm3s6965-ek/discover/defconfig
View File

@ -104,38 +104,38 @@ CONFIG_ARCH_CHIP_LM3S6965=y
#
# Select Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
# CONFIG_LM_UART2 is not set
CONFIG_LM_ETHERNET=y
# CONFIG_TIVA_UART2 is not set
CONFIG_TIVA_ETHERNET=y
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
# CONFIG_LM_BOARDMAC is not set
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
# CONFIG_TIVA_BOARDMAC is not set
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#

10
configs/lm3s6965-ek/include/board.h
View File

@ -63,7 +63,7 @@
* of (400 / 2) / 4 = 50MHz
*/
#define LM_SYSDIV 4
#define TIVA_SYSDIV 4
#define SYSCLK_FREQUENCY 50000000 /* 50MHz */
/* Other RCC settings:
@ -74,7 +74,7 @@
* - No auto-clock gating reset
*/
#define LM_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM_SYSDIV))
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
/* RCC2 settings -- RCC2 not used. Other RCC2 settings
*
@ -83,7 +83,7 @@
* - Not using RCC2
*/
#define LM_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(LM_SYSDIV))
#define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(TIVA_SYSDIV))
/* LED definitions ******************************************************************/
@ -128,12 +128,12 @@ void tiva_boardinitialize(void);
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif

44
configs/lm3s6965-ek/nsh/defconfig
View File

@ -104,38 +104,38 @@ CONFIG_ARCH_CHIP_LM3S6965=y
#
# Select Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
# CONFIG_LM_UART2 is not set
CONFIG_LM_ETHERNET=y
# CONFIG_TIVA_UART2 is not set
CONFIG_TIVA_ETHERNET=y
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
# CONFIG_LM_BOARDMAC is not set
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
# CONFIG_TIVA_BOARDMAC is not set
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#

26
configs/lm3s6965-ek/nx/defconfig
View File

@ -104,25 +104,25 @@ CONFIG_ARCH_CHIP_LM3S6965=y
#
# Select Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
# CONFIG_LM_UART2 is not set
# CONFIG_LM_ETHERNET is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_TIVA_ETHERNET is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris SSI Configuration

4
configs/lm3s6965-ek/src/lm3s6965ek_internal.h
View File

@ -56,12 +56,12 @@
* expanded).
*/
#if LM_NSSI == 0
#if TIVA_NSSI == 0
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#elif LM_NSSI == 1
#elif TIVA_NSSI == 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#endif

8
configs/lm3s6965-ek/src/up_ethernet.c
View File

@ -67,12 +67,12 @@
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
void tiva_ethernetmac(struct ether_addr *ethaddr)
{
uint32_t user0;
@ -80,8 +80,8 @@ void tiva_ethernetmac(struct ether_addr *ethaddr)
/* Get the current value of the user registers */
user0 = getreg32(LM_FLASH_USERREG0);
user1 = getreg32(LM_FLASH_USERREG1);
user0 = getreg32(TIVA_FLASH_USERREG0);
user1 = getreg32(TIVA_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);

46
configs/lm3s6965-ek/tcpecho/defconfig
View File

@ -126,39 +126,39 @@ CONFIG_ARCH_CHIP_LM3S=y
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
CONFIG_LM_ETHERNET=y
# CONFIG_LM_FLASH is not set
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
# CONFIG_LM_BOARDMAC is not set
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
# CONFIG_TIVA_BOARDMAC is not set
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#

38
configs/lm3s8962-ek/README.txt
View File

@ -399,15 +399,15 @@ Stellaris LM3S8962 Evaluation Kit Configuration Options
Additional interrupt support can be disabled if desired to reduce memory
footprint.
CONFIG_LM_DISABLE_GPIOA_IRQS=n
CONFIG_LM_DISABLE_GPIOB_IRQS=n
CONFIG_LM_DISABLE_GPIOC_IRQS=n
CONFIG_LM_DISABLE_GPIOD_IRQS=n
CONFIG_LM_DISABLE_GPIOE_IRQS=n
CONFIG_LM_DISABLE_GPIOF_IRQS=n
CONFIG_LM_DISABLE_GPIOG_IRQS=n
CONFIG_LM_DISABLE_GPIOH_IRQS=n
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
CONFIG_TIVA_DISABLE_GPIOA_IRQS=n
CONFIG_TIVA_DISABLE_GPIOB_IRQS=n
CONFIG_TIVA_DISABLE_GPIOC_IRQS=n
CONFIG_TIVA_DISABLE_GPIOD_IRQS=n
CONFIG_TIVA_DISABLE_GPIOE_IRQS=n
CONFIG_TIVA_DISABLE_GPIOF_IRQS=n
CONFIG_TIVA_DISABLE_GPIOG_IRQS=n
CONFIG_TIVA_DISABLE_GPIOH_IRQS=n
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
LM3S8962 specific device driver settings
@ -432,18 +432,18 @@ Stellaris LM3S8962 Evaluation Kit Configuration Options
value is large, then larger values of this setting may cause
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET)
CONFIG_TIVA_ETHERNET - This must be set (along with CONFIG_NET)
to build the Stellaris Ethernet driver
CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_LM_BOARDMAC - If the board-specific logic can provide
CONFIG_TIVA_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_TIVA_BOARDMAC - If the board-specific logic can provide
a MAC address (via tiva_ethernetmac()), then this should be selected.
CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation
CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_LM_ETHNOPAD - Set to suppress Tx padding
CONFIG_LM_MULTICAST - Set to enable multicast frames
CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_LM_BADCRC - Set to enable bad CRC rejection.
CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console.
CONFIG_TIVA_ETHHDUPLEX - Set to force half duplex operation
CONFIG_TIVA_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_TIVA_ETHNOPAD - Set to suppress Tx padding
CONFIG_TIVA_MULTICAST - Set to enable multicast frames
CONFIG_TIVA_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_TIVA_BADCRC - Set to enable bad CRC rejection.
CONFIG_TIVA_DUMPPACKET - Dump each packet received/sent to the console.
Configurations
^^^^^^^^^^^^^^

10
configs/lm3s8962-ek/include/board.h
View File

@ -63,7 +63,7 @@
* of (400 / 2) / 4 = 50MHz
*/
#define LM_SYSDIV 4
#define TIVA_SYSDIV 4
#define SYSCLK_FREQUENCY 50000000 /* 50MHz */
/* Other RCC settings:
@ -74,7 +74,7 @@
* - No auto-clock gating reset
*/
#define LM_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM_SYSDIV))
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
/* RCC2 settings -- RCC2 not used. Other RCC2 settings
*
@ -83,7 +83,7 @@
* - Not using RCC2
*/
#define LM_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(LM_SYSDIV))
#define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(TIVA_SYSDIV))
/* LED definitions ******************************************************************/
@ -128,12 +128,12 @@ void tiva_boardinitialize(void);
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
struct ether_addr;
void tiva_ethernetmac(struct ether_addr *ethaddr);
#endif

80
configs/lm3s8962-ek/nsh/defconfig
View File

@ -34,6 +34,7 @@ CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDINT_H is not set
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
@ -78,6 +79,7 @@ CONFIG_ARCH="arm"
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
CONFIG_ARCH_CHIP_LM=y
# CONFIG_ARCH_CHIP_TIVA is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
@ -103,7 +105,8 @@ CONFIG_ARCH_CHIP="tiva"
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
# CONFIG_ARCH_HAVE_FPU is not set
# CONFIG_ARCH_HAVE_MPU is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
@ -119,7 +122,7 @@ CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_OABI_TOOLCHAIN is not set
#
# Stellaris Configuration Options
# Tiva/Stellaris Configuration Options
#
# CONFIG_ARCH_CHIP_LM3S6918 is not set
# CONFIG_ARCH_CHIP_LM3S9B96 is not set
@ -131,45 +134,45 @@ CONFIG_ARCH_CHIP_LM3S=y
# CONFIG_LM_REVA2 is not set
#
# Stellaris Peripheral Support
# Tiva/Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
CONFIG_LM_ETHERNET=y
# CONFIG_LM_FLASH is not set
CONFIG_TIVA_ETHERNET=y
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris Ethernet Configuration
# Tiva/Stellaris Ethernet Configuration
#
# CONFIG_LM_ETHLEDS is not set
# CONFIG_LM_BOARDMAC is not set
# CONFIG_LM_ETHHDUPLEX is not set
# CONFIG_LM_ETHNOAUTOCRC is not set
# CONFIG_LM_ETHNOPAD is not set
# CONFIG_LM_MULTICAST is not set
# CONFIG_LM_PROMISCUOUS is not set
# CONFIG_LM_TIMESTAMP is not set
# CONFIG_LM_BADCRC is not set
# CONFIG_TIVA_ETHLEDS is not set
# CONFIG_TIVA_BOARDMAC is not set
# CONFIG_TIVA_ETHHDUPLEX is not set
# CONFIG_TIVA_ETHNOAUTOCRC is not set
# CONFIG_TIVA_ETHNOPAD is not set
# CONFIG_TIVA_MULTICAST is not set
# CONFIG_TIVA_PROMISCUOUS is not set
# CONFIG_TIVA_TIMESTAMP is not set
# CONFIG_TIVA_BADCRC is not set
# CONFIG_M3S_DUMPPACKET is not set
#
# Stellaris SSI Configuration
# Tiva/Stellaris SSI Configuration
#
CONFIG_SSI_POLLWAIT=y
CONFIG_SSI_TXLIMIT=4
@ -190,6 +193,7 @@ CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_IDLE_CUSTOM is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
@ -371,7 +375,27 @@ CONFIG_NETDEVICES=y
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
# CONFIG_ARCH_HAVE_UART is not set
CONFIG_ARCH_HAVE_UART0=y
# CONFIG_ARCH_HAVE_UART1 is not set
# CONFIG_ARCH_HAVE_UART2 is not set
# CONFIG_ARCH_HAVE_UART3 is not set
# CONFIG_ARCH_HAVE_UART4 is not set
# CONFIG_ARCH_HAVE_UART5 is not set
# CONFIG_ARCH_HAVE_UART6 is not set
# CONFIG_ARCH_HAVE_UART7 is not set
# CONFIG_ARCH_HAVE_UART8 is not set
# CONFIG_ARCH_HAVE_SCI0 is not set
# CONFIG_ARCH_HAVE_SCI1 is not set
# CONFIG_ARCH_HAVE_USART0 is not set
# CONFIG_ARCH_HAVE_USART1 is not set
# CONFIG_ARCH_HAVE_USART2 is not set
# CONFIG_ARCH_HAVE_USART3 is not set
# CONFIG_ARCH_HAVE_USART4 is not set
# CONFIG_ARCH_HAVE_USART5 is not set
# CONFIG_ARCH_HAVE_USART6 is not set
# CONFIG_ARCH_HAVE_USART7 is not set
# CONFIG_ARCH_HAVE_USART8 is not set
#
# USART Configuration

3
configs/lm3s8962-ek/nsh/setenv.sh
View File

@ -50,7 +50,8 @@ fi
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.

28
configs/lm3s8962-ek/nx/defconfig
View File

@ -133,26 +133,26 @@ CONFIG_ARCH_CHIP_LM3S=y
#
# Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
# CONFIG_LM_ETHERNET is not set
# CONFIG_LM_FLASH is not set
# CONFIG_TIVA_ETHERNET is not set
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Stellaris SSI Configuration

4
configs/lm3s8962-ek/src/lm3s8962ek_internal.h
View File

@ -56,12 +56,12 @@
* expanded).
*/
#if LM_NSSI == 0
#if TIVA_NSSI == 0
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#elif LM_NSSI == 1
#elif TIVA_NSSI == 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#endif

8
configs/lm3s8962-ek/src/up_ethernet.c
View File

@ -67,12 +67,12 @@
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM_BOARDMAC is defined, this function
* USER0 and USER1 registers. If CONFIG_TIVA_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM_BOARDMAC
#ifdef CONFIG_TIVA_BOARDMAC
void tiva_ethernetmac(struct ether_addr *ethaddr)
{
uint32_t user0;
@ -80,8 +80,8 @@ void tiva_ethernetmac(struct ether_addr *ethaddr)
/* Get the current value of the user registers */
user0 = getreg32(LM_FLASH_USERREG0);
user1 = getreg32(LM_FLASH_USERREG1);
user0 = getreg32(TIVA_FLASH_USERREG0);
user1 = getreg32(TIVA_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);

38
configs/lm4f120-launchpad/README.txt
View File

@ -626,15 +626,15 @@ LM4F120 LaunchPad Configuration Options
Additional interrupt support can be disabled if desired to reduce memory
footprint.
CONFIG_LM_DISABLE_GPIOA_IRQS=n
CONFIG_LM_DISABLE_GPIOB_IRQS=n
CONFIG_LM_DISABLE_GPIOC_IRQS=n
CONFIG_LM_DISABLE_GPIOD_IRQS=n
CONFIG_LM_DISABLE_GPIOE_IRQS=n
CONFIG_LM_DISABLE_GPIOF_IRQS=n
CONFIG_LM_DISABLE_GPIOG_IRQS=n
CONFIG_LM_DISABLE_GPIOH_IRQS=n
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
CONFIG_TIVA_DISABLE_GPIOA_IRQS=n
CONFIG_TIVA_DISABLE_GPIOB_IRQS=n
CONFIG_TIVA_DISABLE_GPIOC_IRQS=n
CONFIG_TIVA_DISABLE_GPIOD_IRQS=n
CONFIG_TIVA_DISABLE_GPIOE_IRQS=n
CONFIG_TIVA_DISABLE_GPIOF_IRQS=n
CONFIG_TIVA_DISABLE_GPIOG_IRQS=n
CONFIG_TIVA_DISABLE_GPIOH_IRQS=n
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
LM4F120 specific device driver settings
@ -659,18 +659,18 @@ LM4F120 LaunchPad Configuration Options
value is large, then larger values of this setting may cause
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
CONFIG_LM_ETHERNET - This must be set (along with CONFIG_NET)
CONFIG_TIVA_ETHERNET - This must be set (along with CONFIG_NET)
to build the Stellaris Ethernet driver
CONFIG_LM_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_LM_BOARDMAC - If the board-specific logic can provide
CONFIG_TIVA_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_TIVA_BOARDMAC - If the board-specific logic can provide
a MAC address (via tiva_ethernetmac()), then this should be selected.
CONFIG_LM_ETHHDUPLEX - Set to force half duplex operation
CONFIG_LM_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_LM_ETHNOPAD - Set to suppress Tx padding
CONFIG_LM_MULTICAST - Set to enable multicast frames
CONFIG_LM_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_LM_BADCRC - Set to enable bad CRC rejection.
CONFIG_LM_DUMPPACKET - Dump each packet received/sent to the console.
CONFIG_TIVA_ETHHDUPLEX - Set to force half duplex operation
CONFIG_TIVA_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_TIVA_ETHNOPAD - Set to suppress Tx padding
CONFIG_TIVA_MULTICAST - Set to enable multicast frames
CONFIG_TIVA_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_TIVA_BADCRC - Set to enable bad CRC rejection.
CONFIG_TIVA_DUMPPACKET - Dump each packet received/sent to the console.
Configurations
^^^^^^^^^^^^^^

18
configs/lm4f120-launchpad/include/board.h
View File

@ -65,7 +65,7 @@
* of (400 / 1) / 5 = 80MHz (Using RCC2 and DIV400).
*/
#define LM_SYSDIV 5
#define TIVA_SYSDIV 5
#define SYSCLK_FREQUENCY 80000000 /* 80MHz */
/* Other RCC settings:
@ -76,8 +76,8 @@
* - No auto-clock gating reset
*/
#define LM_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | \
SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM_SYSDIV))
#define TIVA_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | \
SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(TIVA_SYSDIV))
/* RCC2 settings
*
@ -98,13 +98,13 @@
* etc.
*/
#if (LM_SYSDIV & 1) == 0
# define LM_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV2LSB | \
SYSCON_RCC2_SYSDIV_DIV400(LM_SYSDIV) | \
SYSCON_RCC2_DIV400 | SYSCON_RCC2_USERCC2)
#if (TIVA_SYSDIV & 1) == 0
# define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV2LSB | \
SYSCON_RCC2_SYSDIV_DIV400(TIVA_SYSDIV) | \
SYSCON_RCC2_DIV400 | SYSCON_RCC2_USERCC2)
#else
# define LM_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV_DIV400(LM_SYSDIV) | \
SYSCON_RCC2_DIV400 | SYSCON_RCC2_USERCC2)
# define TIVA_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV_DIV400(TIVA_SYSDIV) | \
SYSCON_RCC2_DIV400 | SYSCON_RCC2_USERCC2)
#endif
/* LED definitions ******************************************************************/

38
configs/lm4f120-launchpad/nsh/defconfig
View File

@ -129,31 +129,31 @@ CONFIG_ARCH_CHIP_LM4F=y
#
# Tiva/Stellaris Peripheral Support
#
CONFIG_LM_UART0=y
# CONFIG_LM_UART1 is not set
# CONFIG_LM_UART2 is not set
# CONFIG_LM_UART3 is not set
# CONFIG_LM_UART4 is not set
# CONFIG_LM_UART5 is not set
# CONFIG_LM_UART6 is not set
# CONFIG_LM_UART7 is not set
CONFIG_TIVA_UART0=y
# CONFIG_TIVA_UART1 is not set
# CONFIG_TIVA_UART2 is not set
# CONFIG_TIVA_UART3 is not set
# CONFIG_TIVA_UART4 is not set
# CONFIG_TIVA_UART5 is not set
# CONFIG_TIVA_UART6 is not set
# CONFIG_TIVA_UART7 is not set
# CONFIG_SSI0_DISABLE is not set
CONFIG_SSI1_DISABLE=y
# CONFIG_LM_ETHERNET is not set
# CONFIG_LM_FLASH is not set
# CONFIG_TIVA_ETHERNET is not set
# CONFIG_TIVA_FLASH is not set
#
# Disable GPIO Interrupts
#
# CONFIG_LM_DISABLE_GPIOA_IRQS is not set
# CONFIG_LM_DISABLE_GPIOB_IRQS is not set
# CONFIG_LM_DISABLE_GPIOC_IRQS is not set
# CONFIG_LM_DISABLE_GPIOD_IRQS is not set
# CONFIG_LM_DISABLE_GPIOE_IRQS is not set
# CONFIG_LM_DISABLE_GPIOF_IRQS is not set
# CONFIG_LM_DISABLE_GPIOG_IRQS is not set
CONFIG_LM_DISABLE_GPIOH_IRQS=y
CONFIG_LM_DISABLE_GPIOJ_IRQS=y
# CONFIG_TIVA_DISABLE_GPIOA_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOB_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOC_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOD_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOE_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOF_IRQS is not set
# CONFIG_TIVA_DISABLE_GPIOG_IRQS is not set
CONFIG_TIVA_DISABLE_GPIOH_IRQS=y
CONFIG_TIVA_DISABLE_GPIOJ_IRQS=y
#
# Tiva/Stellaris SSI Configuration

4
configs/lm4f120-launchpad/src/lmf4120-launchpad.h
View File

@ -56,12 +56,12 @@
* expanded).
*/
#if LM_NSSI < 1
#if TIVA_NSSI < 1
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#elif LM_NSSI < 2
#elif TIVA_NSSI < 2
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#endif