sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

STM3240G-EVAL: Add kernel build mode support and an NxWM kernel mode configuration

Browse Source
This commit is contained in:
Gregory Nutt 2013-12-29 13:15:08 -06:00
parent d487d27b41
commit a463c71ac3
16 changed files with 3472 additions and 856 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

105
configs/stm3240g-eval/README.txt
View File

@ -242,7 +242,7 @@ NXFLAT Toolchain
tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can
be downloaded from the NuttX SourceForge download site
(https://sourceforge.net/projects/nuttx/files/).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
@ -887,14 +887,14 @@ STM3240G-EVAL-specific Configuration Options
STM32 USB OTG FS Host Driver Support
Pre-requisites
CONFIG_USBHOST - Enable USB host support
CONFIG_STM32_OTGFS - Enable the STM32 USB OTG FS block
CONFIG_STM32_SYSCFG - Needed
CONFIG_SCHED_WORKQUEUE - Worker thread support is required
Options:
CONFIG_STM32_OTGFS_RXFIFO_SIZE - Size of the RX FIFO in 32-bit words.
Default 128 (512 bytes)
CONFIG_STM32_OTGFS_NPTXFIFO_SIZE - Size of the non-periodic Tx FIFO
@ -955,6 +955,99 @@ Where <subdir> is one of the following:
control the configuration. See the section entitled "NuttX Configuration
Tool" in the top-level README.txt file.
knxwm:
-----
[WARNING: This is a work in progress].
This is identical to the nxwm configuration below except that NuttX
is built as a kernel-mode, monolithic module and the user applications
are built separately. Is is recommended to use a special make command;
not just 'make' but make with the following two arguments:
make pass1 pass2
In the normal case (just 'make'), make will attempt to build both user-
and kernel-mode blobs more or less interleaved. This actual works!
However, for me it is very confusing so I prefer the above make command:
Make the user-space binaries first (pass1), then make the kernel-space
binaries (pass2)
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. This is the default platform/toolchain in the configuration:
CONFIG_HOST_WINDOWS=y : Windows
CONFIG_WINDOWS_CYGWIN=y : Cygwin environment on Windows
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
This is easily changed by modifying the configuration.
3. At the end of the build, there will be several files in the top-level
NuttX build directory:
PASS1:
nuttx_user.elf - The pass1 user-space ELF file
nuttx_user.hex - The pass1 Intel HEX format file (selected in defconfig)
User.map - Symbols in the user-space ELF file
PASS2:
nuttx - The pass2 kernel-space ELF file
nuttx.hex - The pass2 Intel HEX file (selected in defconfig)
System.map - Symbols in the kernel-space ELF file
4. Combining .hex files. If you plan to use the STM32 ST-Link Utility to
load the .hex files into FLASH, then you need to combine the two hex
files into a single .hex file. Here is how you can do that.
a. The 'tail' of the nuttx.hex file should look something like this
(with my comments added):
$ tail nuttx.hex
# 00, data records
...
:10 9DC0 00 01000000000800006400020100001F0004
:10 9DD0 00 3B005A0078009700B500D400F300110151
:08 9DE0 00 30014E016D0100008D
# 05, Start Linear Address Record
:04 0000 05 0800 0419 D2
# 01, End Of File record
:00 0000 01 FF
Use an editor such as vi to remove the 05 and 01 records.
b. The 'head' of the nuttx_user.hex file should look something like
this (again with my comments added):
$ head nuttx_user.hex
# 04, Extended Linear Address Record
:02 0000 04 0801 F1
# 00, data records
:10 8000 00 BD89 01084C800108C8110208D01102087E
:10 8010 00 0010 00201C1000201C1000203C16002026
:10 8020 00 4D80 01085D80010869800108ED83010829
...
Nothing needs to be done here. The nuttx_user.hex file should
be fine.
c. Combine the edited nuttx.hex and un-edited nuttx_user.hex
file to produce a single combined hex file:
$ cat nuttx.hex nuttx_user.hex >combined.hex
Then use the combined.hex file with the STM32 ST-Link tool. If
you do this a lot, you will probably want to invest a little time
to develop a tool to automate these steps.
nettest:
-------
@ -1097,7 +1190,7 @@ Where <subdir> is one of the following:
CONFIG_MM_REGIONS=3 : When FSMC is enabled, so is the on-board SRAM memory region
8. USB OTG FS Device or Host Support
CONFIG_USBDEV - Enable USB device support, OR
CONFIG_USBHOST - Enable USB host support
CONFIG_STM32_OTGFS - Enable the STM32 USB OTG FS block
@ -1168,7 +1261,7 @@ Where <subdir> is one of the following:
-CONFIG_STM32_RNG=y
+CONFIG_STM32_RNG=n
-CONFIG_DEV_RANDOM=y
+CONFIG_DEV_RANDOM=n

2
configs/stm3240g-eval/kernel/.gitignore vendored Normal file
View File

@ -0,0 +1,2 @@
/nuttx_user.elf

122
configs/stm3240g-eval/kernel/Makefile Normal file
View File

@ -0,0 +1,122 @@
############################################################################
# configs/stm3240g-eval/kernel/Makefile
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
# This is the directory for the board-specific header files
BOARD_INCLUDE = $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include
# The entry point name (if none is provided in the .config file)
CONFIG_USER_ENTRYPOINT ?= user_start
ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
# Get the paths to the libraries and the links script path in format that
# is appropriate for the host OS
ifeq ($(WINTOOL),y)
# Windows-native toolchains
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
else
# Linux/Cygwin-native toolchain
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
endif
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS))))
USER_LIBGCC = "${shell $(CC) -print-libgcc-file-name}"
# Source files
CSRCS = up_userspace.c
COBJS = $(CSRCS:.c=$(OBJEXT))
OBJS = $(COBJS)
# Targets:
all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map
.PHONY: nuttx_user.elf depend clean distclean
$(COBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
# Create the nuttx_user.elf file containing all of the user-mode code
nuttx_user.elf: $(OBJS)
$(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC)
$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
@echo "LD: nuttx_user.elf"
$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
ifeq ($(CONFIG_INTELHEX_BINARY),y)
@echo "CP: nuttx_user.hex"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
endif
ifeq ($(CONFIG_MOTOROLA_SREC),y)
@echo "CP: nuttx_user.srec"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
endif
ifeq ($(CONFIG_RAW_BINARY),y)
@echo "CP: nuttx_user.bin"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
endif
$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
@echo "MK: User.map"
$(Q) $(NM) nuttx_user.elf >$(TOPDIR)$(DELIM)User.map
$(Q) $(CROSSDEV)size nuttx_user.elf
.depend:
depend: .depend
clean:
$(call DELFILE, nuttx_user.elf)
$(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.*")
$(call DELFILE, "$(TOPDIR)$(DELIM)User.map")
$(call CLEAN)
distclean: clean

142
configs/stm3240g-eval/kernel/up_userspace.c Normal file
View File

@ -0,0 +1,142 @@
/****************************************************************************
* configs/stm3240g-eval/kernel/up_userspace.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <nuttx/userspace.h>
#include <nuttx/wqueue.h>
#include <nuttx/mm.h>
#if defined(CONFIG_NUTTX_KERNEL) && !defined(__KERNEL__)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_NUTTX_USERSPACE
# error "CONFIG_NUTTX_USERSPACE not defined"
#endif
#if CONFIG_NUTTX_USERSPACE != 0x08020000
# error "CONFIG_NUTTX_USERSPACE must be 0x08020000 to match memory.ld"
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/* These 'addresses' of these values are setup by the linker script. They are
* not actual uint32_t storage locations! They are only used meaningfully in the
* following way:
*
* - The linker script defines, for example, the symbol_sdata.
* - The declareion extern uint32_t _sdata; makes C happy. C will believe
* that the value _sdata is the address of a uint32_t variable _data (it is
* not!).
* - We can recoved the linker value then by simply taking the address of
* of _data. like: uint32_t *pdata = &_sdata;
*/
extern uint32_t _stext; /* Start of .text */
extern uint32_t _etext; /* End_1 of .text + .rodata */
extern const uint32_t _eronly; /* End+1 of read only section (.text + .rodata) */
extern uint32_t _sdata; /* Start of .data */
extern uint32_t _edata; /* End+1 of .data */
extern uint32_t _sbss; /* Start of .bss */
extern uint32_t _ebss; /* End+1 of .bss */
/* This is the user space entry point */
int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]);
const struct userspace_s userspace __attribute__ ((section (".userspace"))) =
{
/* General memory map */
.us_entrypoint = (main_t)CONFIG_USER_ENTRYPOINT,
.us_textstart = (uintptr_t)&_stext,
.us_textend = (uintptr_t)&_etext,
.us_datasource = (uintptr_t)&_eronly,
.us_datastart = (uintptr_t)&_sdata,
.us_dataend = (uintptr_t)&_edata,
.us_bssstart = (uintptr_t)&_sbss,
.us_bssend = (uintptr_t)&_ebss,
/* Task/thread startup routines */
.task_startup = task_startup,
#ifndef CONFIG_DISABLE_PTHREAD
.pthread_startup = pthread_startup,
#endif
/* Signal handler trampoline */
#ifndef CONFIG_DISABLE_SIGNALS
.signal_handler = up_signal_handler,
#endif
/* Memory manager entry points (declared in include/nuttx/mm.h) */
.mm_initialize = umm_initialize,
.mm_addregion = umm_addregion,
.mm_trysemaphore = umm_trysemaphore,
.mm_givesemaphore = umm_givesemaphore,
/* Memory manager entry points (declared in include/stdlib.h) */
.mm_malloc = malloc,
.mm_realloc = realloc,
.mm_zalloc = zalloc,
.mm_free = free,
/* User-space work queue support (declared in include/nuttx/wqueue.h) */
#if defined(CONFIG_SCHED_WORKQUEUE) && defined(CONFIG_SCHED_USRWORK)
.work_usrstart = work_usrstart,
#endif
};
/****************************************************************************
* Public Functions
****************************************************************************/
#endif /* CONFIG_NUTTX_KERNEL && !__KERNEL__ */

113
configs/stm3240g-eval/knxwm/Make.defs Normal file
View File

@ -0,0 +1,113 @@
############################################################################
# configs/stm3240g-eval/knxwm/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
ARCHSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
ARCHSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

1322
configs/stm3240g-eval/knxwm/defconfig Normal file
View File

File diff suppressed because it is too large Load Diff

52
configs/stm3240g-eval/nxwm/appconfig → configs/stm3240g-eval/knxwm/setenv.sh Normal file → Executable file
View File

@ -1,7 +1,7 @@
############################################################################
# configs/stm3240g-eval/nxwm/appconfig
#!/bin/bash
# configs/stm3240g-eval/knxwm/setenv.sh
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
@ -31,23 +31,37 @@
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# The NSH Library -- NOTE: The NxWM unit test must be installed at
# apps/external in order to build this example. See
# NxWidgets/UnitTests/README.txt for additional information
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
CONFIGURED_APPS += system/readline
CONFIGURED_APPS += nshlib
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
# Networking libraries.
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
ifeq ($(CONFIG_NET),y)
CONFIGURED_APPS += netutils/uiplib
CONFIGURED_APPS += netutils/resolv
CONFIGURED_APPS += netutils/webclient
CONFIGURED_APPS += netutils/tftpc
ifeq ($(CONFIG_NSH_TELNET),y)
CONFIGURED_APPS += netutils/telnetd
endif
endif
# This is the Cygwin path to the location where I installed the RIDE
# toolchain under windows. You will also have to edit this if you install
# the RIDE toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

2004
configs/stm3240g-eval/nxwm/defconfig
View File

File diff suppressed because it is too large Load Diff

109
configs/stm3240g-eval/scripts/kernel-space.ld Executable file
View File

@ -0,0 +1,109 @@
/****************************************************************************
* configs/stm3240g-eval/scripts/kernel-space.ld
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* NOTE: This depends on the memory.ld script having been included prior to
* this script.
*/
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > kflash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > kflash
.ARM.extab : {
*(.ARM.extab*)
} > kflash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > kflash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > ksram AT > kflash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > ksram
/* Stabs debugging sections */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

2
configs/stm3240g-eval/scripts/ld.script
View File

@ -33,7 +33,7 @@
*
****************************************************************************/
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112Kb of SRAM beginning at address 0x2000:0000

100
configs/stm3240g-eval/scripts/memory.ld Normal file
View File

@ -0,0 +1,100 @@
/****************************************************************************
* configs/stm3240-eval/scripts/memory.ld
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
* 192Kb of SRAM. SRAM is split up into three blocks:
*
* 1) 112KB of SRAM beginning at address 0x2000:0000
* 2) 16KB of SRAM beginning at address 0x2001:c000
* 3) 64KB of CCM SRAM beginning at address 0x1000:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*
* For MPU support, the kernel-mode NuttX section is assumed to be 128Kb of
* FLASH and 4Kb of SRAM. That is an excessive amount for the kernel which
* should fit into 64KB and, of course, can be optimized as needed (See
* also configs/stm3240g-eval/scripts/kernel-space.ld). Allowing the
* additional does permit addition debug instrumentation to be added to the
* kernel space without overflowing the partition.
*
* Alignment of the user space FLASH partition is also a critical factor:
* The user space FLASH partition will be spanned with a single region of
* size 2**n bytes. The alignment of the user-space region must be the same.
* As a consequence, as the user-space increases in size, the alignmment
* requirement also increases.
*
* This alignment requirement means that the largest user space FLASH region
* you can have will be 512KB at it would have to be positioned at
* 0x08800000. If you change this address, don't forget to change the
* CONFIG_NUTTX_USERSPACE configuration setting to match and to modify
* the check in kernel/userspace.c.
*
* For the same reasons, the maximum size of the SRAM mapping is limited to
* 4KB. Both of these alignment limitations could be reduced by using
* multiple regions to map the FLASH/SDRAM range or perhaps with some
* clever use of subregions.
*
* A detailed memory map for the 112KB SRAM region is as follows:
*
* 0x20000 0000: Kernel .data region. Typical size: 0.1KB
* ------- ---- Kernel .bss region. Typical size: 1.8KB
* 0x20000 0800: Kernel IDLE thread stack (approximate). Size is
* determined by CONFIG_IDLETHREAD_STACKSIZE and
* adjustments for alignment. Typical is 1KB.
* ------- ---- Padded to 4KB
* 0x20000 1000: User .data region. Size is variable.
* ------- ---- User .bss region Size is variable.
* 0x20000 2000: Beginning of kernel heap. Size determined by
* CONFIG_MM_KERNEL_HEAPSIZE.
* ------- ---- Beginning of user heap. Can vary with other settings.
* 0x20001 c000: End+1 of CPU RAM
*/
MEMORY
{
/* 1024Kb FLASH */
kflash (rx) : ORIGIN = 0x08000000, LENGTH = 128K
uflash (rx) : ORIGIN = 0x08020000, LENGTH = 128K
xflash (rx) : ORIGIN = 0x08040000, LENGTH = 768K
/* 112Kb of contiguous SRAM */
ksram (rwx) : ORIGIN = 0x20000000, LENGTH = 4K
usram (rwx) : ORIGIN = 0x20001000, LENGTH = 4K
xsram (rwx) : ORIGIN = 0x20001000, LENGTH = 104K
}

126
configs/stm3240g-eval/scripts/user-space.ld Normal file
View File

@ -0,0 +1,126 @@
/****************************************************************************
* configs/stm3240g-eval/scripts/user-space.ld
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* NOTE: This depends on the memory.ld script having been included prior to
* this script.
*/
/* Make sure that the critical memory management functions are in user-space.
* the user heap memory manager will reside in user-space but be usable both
* by kernel- and user-space code
*/
EXTERN(umm_initialize)
EXTERN(umm_addregion)
EXTERN(umm_trysemaphore)
EXTERN(umm_givesemaphore)
EXTERN(malloc)
EXTERN(realloc)
EXTERN(zalloc)
EXTERN(free)
OUTPUT_ARCH(arm)
SECTIONS
{
.userspace : {
*(.userspace)
} > uflash
.text : {
_stext = ABSOLUTE(.);
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > uflash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > uflash
.ARM.extab : {
*(.ARM.extab*)
} > uflash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > uflash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > usram AT > uflash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > usram
/* Stabs debugging sections */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

34
configs/stm3240g-eval/src/stm3240g-internal.h
View File

@ -1,8 +1,7 @@
/****************************************************************************************************
* configs/stm3240g_eval/src/stm3240g_internal.h
* arch/arm/src/board/stm3240g_internal.n
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -70,8 +69,8 @@
/* You can't use CAN1 with FSMC:
*
* PD0 = FSMC_D2 & CAN1_RX
* PD1 = FSMC_D3 & CAN1_TX
* PD0 = FSMC_D2 & CAN1_RX
* PD1 = FSMC_D3 & CAN1_TX
*/
#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_FSMC)
@ -127,7 +126,7 @@
# endif
#endif
/* USB OTG FS
/* USB OTG FS
*
* PA9 VBUS_FS
* PH5 OTG_FS_PowerSwitchOn
@ -145,7 +144,7 @@
/* The STM3240G-EVAL has two STMPE811QTR I/O expanders on board both connected
* to the STM32 via I2C1. They share a common interrupt line: PI2.
*
*
* STMPE811 U24, I2C address 0x41 (7-bit)
* ------ ---- ---------------- --------------------------------------------
* STPE11 PIN BOARD SIGNAL BOARD CONNECTION
@ -158,7 +157,7 @@
* IN2 EXP_IO10
* IN1 EXP_IO11
* IN0 EXP_IO12
*
*
* STMPE811 U29, I2C address 0x44 (7-bit)
* ------ ---- ---------------- --------------------------------------------
* STPE11 PIN BOARD SIGNAL BOARD CONNECTION
@ -307,7 +306,7 @@ void stm32_disablefsmc(void);
* Name: stm32_selectsram
*
* Description:
* Initialize to access external SRAM. SRAM will be visible at the FSMC Bank
* Initialize to access external SRAM. SRAM will be visible at the FSMC Bank
* NOR/SRAM2 base address (0x64000000)
*
* General transaction rules. The requested AHB transaction data size can be 8-,
@ -369,5 +368,24 @@ void stm32_selectlcd(void);
void stm32_deselectlcd(void);
#endif
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization for NSH.
*
* CONFIG_NSH_ARCHINIT=y :
* Called from the NSH library
*
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
* CONFIG_NSH_ARCHINIT=n :
* Called from board_initialize().
*
****************************************************************************/
#ifdef CONFIG_NSH_LIBRARY
int nsh_archinitialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H */

34
configs/stm3240g-eval/src/up_boot.c
View File

@ -1,8 +1,7 @@
/************************************************************************************
* configs/stm3240g-eval/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -89,11 +88,11 @@ void stm32_boardinitialize(void)
#endif
/* Initialize USB if the 1) OTG FS controller is in the configuration and 2)
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* the weak function stm32_usbinitialize() has been brought into the build.
* Presumeably either CONFIG_USBDEV or CONFIG_USBHOST is also selected.
*/
#ifdef CONFIG_STM32_OTGFS
if (stm32_usbinitialize)
{
@ -107,3 +106,30 @@ void stm32_boardinitialize(void)
up_ledinit();
#endif
}
/****************************************************************************
* Name: board_initialize
*
* Description:
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_initialize(). board_initialize() will be
* called immediately after up_intiialize() is called and just before the
* initial application is started. This additional initialization phase
* may be used, for example, to initialize board-specific device drivers.
*
****************************************************************************/
#ifdef CONFIG_BOARD_INITIALIZE
void board_initialize(void)
{
/* Perform NSH initialization here instead of from the NSH. This
* alternative NSH initialization is necessary when NSH is ran in user-space
* but the initialization function must run in kernel space.
*/
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
(void)nsh_archinitialize();
#endif
}
#endif

60
configs/stm32f4discovery/README.txt
View File

@ -15,7 +15,7 @@ memory and 128kbytes. The board features:
- Easy access to most MCU pins.
Refer to http://www.st.com/internet/evalboard/product/252419.jsp for
further information about this board.
further information about this board.
Contents
========
@ -53,7 +53,7 @@ GNU Toolchain Options
toolchain options.
1. The CodeSourcery GNU toolchain,
2. The Atollic Toolchain,
2. The Atollic Toolchain,
3. The devkitARM GNU toolchain,
4. Raisonance GNU toolchain, or
5. The NuttX buildroot Toolchain (see below).
@ -132,7 +132,7 @@ GNU Toolchain Options
In order to compile successfully. Otherwise, you will get errors like:
"C++ Compiler only available in TrueSTUDIO Professional"
The make may then fail in some of the post link processing because of some of
the other missing tools. The Make.defs file replaces the ar and nm with
the default system x86 tool versions and these seem to work okay. Disable all
@ -154,7 +154,7 @@ IDEs
NuttX is built using command-line make. It can be used with an IDE, but some
effort will be required to create the project.
Makefile Build
--------------
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
@ -251,7 +251,7 @@ NXFLAT Toolchain
tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can
be downloaded from the NuttX SourceForge download site
(https://sourceforge.net/projects/nuttx/files/).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
@ -353,10 +353,10 @@ USART6
with care (See table 5 in the STM32F4Discovery User Guide). The rest are
free I/O pins.
** Port G pins are not supported by the MCU
Default USART/UART Configuration
--------------------------------
USART2 is enabled in all configurations (see */defconfig). RX and TX are
configured on pins PA3 and PA2, respectively (see include/board.h).
@ -417,7 +417,7 @@ Quadrature Encode Timer Inputs
------------------------------
If enabled (by setting CONFIG_QENCODER=y), then quadrature encoder will
use either TIM2 or TIM8 (see nsh/defconfig). If TIM2 is selected, the input
use either TIM2 or TIM8 (see nsh/defconfig). If TIM2 is selected, the input
pins PA15 and PA1 for CH1 and CH2, respectively). If TIM8 is selected, then
PC6 and PI5 will be used for CH1 and CH2 (see include board.h for pin
definitions).
@ -479,7 +479,7 @@ the following lines in each Make.defs file:
If you are using a toolchain other than the Atollic toolchain, then to use the FPU
you will also have to modify the CFLAGS to enable compiler support for the ARMv7-M
FPU. As of this writing, there are not many GCC toolchains that will support the
ARMv7-M FPU.
ARMv7-M FPU.
As a minimum you will need to add CFLAG options to (1) enable hardware floating point
code generation, and to (2) select the FPU implementation. You might try the same
@ -543,7 +543,7 @@ present in the NuttX configuration file:
CONFIG_HEAP2_SIZE : The size of the SRAM in the FSMC
address space
CONFIG_MM_REGIONS : Must be set to a large enough value to
include the FSMC SRAM
include the FSMC SRAM
SRAM Configurations
-------------------
@ -773,7 +773,7 @@ STM32F4Discovery-specific Configuration Options
configuration features.
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
@ -923,7 +923,7 @@ STM32F4Discovery-specific Configuration Options
configuration settings:
CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
NOTE: The STM32 timers are each capable of generating different signals on
each of the four channels with different duty cycles. That capability is
not supported by this driver: Only one output channel per timer.
@ -980,7 +980,7 @@ STM32F4Discovery-specific Configuration Options
CONFIG_SDIO_DMA - Support DMA data transfers. Requires CONFIG_STM32_SDIO
and CONFIG_STM32_DMA2.
CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
Default: Medium
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
4-bit transfer mode.
@ -988,15 +988,15 @@ STM32F4Discovery-specific Configuration Options
STM32 USB OTG FS Host Driver Support
Pre-requisites
CONFIG_USBDEV - Enable USB device support
CONFIG_USBHOST - Enable USB host support
CONFIG_STM32_OTGFS - Enable the STM32 USB OTG FS block
CONFIG_STM32_SYSCFG - Needed
CONFIG_SCHED_WORKQUEUE - Worker thread support is required
Options:
CONFIG_STM32_OTGFS_RXFIFO_SIZE - Size of the RX FIFO in 32-bit words.
Default 128 (512 bytes)
CONFIG_STM32_OTGFS_NPTXFIFO_SIZE - Size of the non-periodic Tx FIFO
@ -1083,7 +1083,7 @@ Where <subdir> is one of the following:
vterminate.o that you removed from libsupc++, you can do that with:
arm-none-eabi-ar.exe rcs libsupc++.a vterminate.o
4. Exceptions are enabled and workking (CONFIG_UCLIBCXX_EXCEPTIONS=y)
elf:
@ -1094,7 +1094,7 @@ Where <subdir> is one of the following:
loader.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
@ -1112,7 +1112,7 @@ Where <subdir> is one of the following:
3. By default, this project assumes that you are *NOT* using the DFU
bootloader.
4. It appears that you cannot excute from CCM RAM. This is why the
following definition appears in the defconfig file:
@ -1138,7 +1138,7 @@ Where <subdir> is one of the following:
binaries (pass2)
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
@ -1221,7 +1221,7 @@ Where <subdir> is one of the following:
builtin applications are selected (see NOTES below).
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
@ -1338,7 +1338,7 @@ Where <subdir> is one of the following:
you can still use certain kinds of debug output (see include/debug.h, all
of the interfaces based on lowsyslog will work in this configuration).
- But don't enable USB debug output! Since USB is console is used for
- But don't enable USB debug output! Since USB is console is used for
USB debug output and you are using a USB console, there will be
infinite loops and deadlocks: Debug output generates USB debug
output which generatates USB debug output, etc. If you want USB
@ -1486,7 +1486,7 @@ Where <subdir> is one of the following:
apps/examples/ostest.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
@ -1502,7 +1502,7 @@ Where <subdir> is one of the following:
3. By default, this project assumes that you are *NOT* using the DFU
bootloader.
4. If you use the Atollic toolchain, then the FPU test can be enabled in the
examples/ostest by adding the following your NuttX configuration file:
@ -1530,7 +1530,7 @@ Where <subdir> is one of the following:
bytes (see arch/arm/include/armv7-m/irq_lazyfpu.h):
-CONFIG_EXAMPLES_OSTEST_FPUSIZE=(4*33)
pm:
--
This is a configuration that is used to test STM32 power management, i.e.,
@ -1550,7 +1550,7 @@ Where <subdir> is one of the following:
CONFIG_PM_CUSTOMINIT moves the PM initialization from arch/arm/src/stm32/stm32_pminitialiaze.c
to configs/stm3210-eval/src/up_pm.c. This allows us to support board-
specific PM initialization.
CONFIG_IDLE_CUSTOM=y
The bulk of the PM activities occur in the IDLE loop. The IDLE loop is
@ -1565,7 +1565,7 @@ Where <subdir> is one of the following:
Here are some additional things to note in the configuration:
CONFIG_PM_BUTTONS=y
CONFIG_PM_BUTTONS enables button support for PM testing. Buttons can drive
EXTI interrupts and EXTI interrrupts can be used to wakeup for certain reduced
power modes (STOP mode). The use of the buttons here is for PM testing purposes
@ -1584,7 +1584,7 @@ Where <subdir> is one of the following:
interface using apps/examples/posix_spawn.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
@ -1602,7 +1602,7 @@ Where <subdir> is one of the following:
3. By default, this project assumes that you are *NOT* using the DFU
bootloader.
usbnsh:
-------
@ -1612,7 +1612,7 @@ Where <subdir> is one of the following:
builtin RS-232 drivers.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:

1
configs/stm32f4discovery/kostest/Make.defs
View File

@ -49,6 +49,7 @@ else
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
ARCHSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld
endif
CC = $(CROSSDEV)gcc