STM3240G-EVAL: Add kernel build mode support and an NxWM kernel mode configuration
This commit is contained in:
Gregory Nutt
parent
d487d27b41
commit
a463c71ac3
@ -955,6 +955,99 @@ Where <subdir> is one of the following:
|
||||
control the configuration. See the section entitled "NuttX Configuration
|
||||
Tool" in the top-level README.txt file.
|
||||
|
||||
knxwm:
|
||||
-----
|
||||
[WARNING: This is a work in progress].
|
||||
|
||||
This is identical to the nxwm configuration below except that NuttX
|
||||
is built as a kernel-mode, monolithic module and the user applications
|
||||
are built separately. Is is recommended to use a special make command;
|
||||
not just 'make' but make with the following two arguments:
|
||||
|
||||
make pass1 pass2
|
||||
|
||||
In the normal case (just 'make'), make will attempt to build both user-
|
||||
and kernel-mode blobs more or less interleaved. This actual works!
|
||||
However, for me it is very confusing so I prefer the above make command:
|
||||
Make the user-space binaries first (pass1), then make the kernel-space
|
||||
binaries (pass2)
|
||||
|
||||
NOTES:
|
||||
|
||||
1. This configuration uses the mconf-based configuration tool. To
|
||||
change this configuration using that tool, you should:
|
||||
|
||||
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||||
and misc/tools/
|
||||
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. This is the default platform/toolchain in the configuration:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y : Windows
|
||||
CONFIG_WINDOWS_CYGWIN=y : Cygwin environment on Windows
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
|
||||
This is easily changed by modifying the configuration.
|
||||
|
||||
3. At the end of the build, there will be several files in the top-level
|
||||
NuttX build directory:
|
||||
|
||||
PASS1:
|
||||
nuttx_user.elf - The pass1 user-space ELF file
|
||||
nuttx_user.hex - The pass1 Intel HEX format file (selected in defconfig)
|
||||
User.map - Symbols in the user-space ELF file
|
||||
|
||||
PASS2:
|
||||
nuttx - The pass2 kernel-space ELF file
|
||||
nuttx.hex - The pass2 Intel HEX file (selected in defconfig)
|
||||
System.map - Symbols in the kernel-space ELF file
|
||||
|
||||
4. Combining .hex files. If you plan to use the STM32 ST-Link Utility to
|
||||
load the .hex files into FLASH, then you need to combine the two hex
|
||||
files into a single .hex file. Here is how you can do that.
|
||||
|
||||
a. The 'tail' of the nuttx.hex file should look something like this
|
||||
(with my comments added):
|
||||
|
||||
$ tail nuttx.hex
|
||||
# 00, data records
|
||||
...
|
||||
:10 9DC0 00 01000000000800006400020100001F0004
|
||||
:10 9DD0 00 3B005A0078009700B500D400F300110151
|
||||
:08 9DE0 00 30014E016D0100008D
|
||||
# 05, Start Linear Address Record
|
||||
:04 0000 05 0800 0419 D2
|
||||
# 01, End Of File record
|
||||
:00 0000 01 FF
|
||||
|
||||
Use an editor such as vi to remove the 05 and 01 records.
|
||||
|
||||
b. The 'head' of the nuttx_user.hex file should look something like
|
||||
this (again with my comments added):
|
||||
|
||||
$ head nuttx_user.hex
|
||||
# 04, Extended Linear Address Record
|
||||
:02 0000 04 0801 F1
|
||||
# 00, data records
|
||||
:10 8000 00 BD89 01084C800108C8110208D01102087E
|
||||
:10 8010 00 0010 00201C1000201C1000203C16002026
|
||||
:10 8020 00 4D80 01085D80010869800108ED83010829
|
||||
...
|
||||
|
||||
Nothing needs to be done here. The nuttx_user.hex file should
|
||||
be fine.
|
||||
|
||||
c. Combine the edited nuttx.hex and un-edited nuttx_user.hex
|
||||
file to produce a single combined hex file:
|
||||
|
||||
$ cat nuttx.hex nuttx_user.hex >combined.hex
|
||||
|
||||
Then use the combined.hex file with the STM32 ST-Link tool. If
|
||||
you do this a lot, you will probably want to invest a little time
|
||||
to develop a tool to automate these steps.
|
||||
|
||||
nettest:
|
||||
-------
|
||||
|
||||
|
||||
2
configs/stm3240g-eval/kernel/.gitignore
vendored
Normal file
2
configs/stm3240g-eval/kernel/.gitignore
vendored
Normal file
@ -0,0 +1,2 @@
|
||||
/nuttx_user.elf
|
||||
|
||||
122
configs/stm3240g-eval/kernel/Makefile
Normal file
122
configs/stm3240g-eval/kernel/Makefile
Normal file
@ -0,0 +1,122 @@
|
||||
############################################################################
|
||||
# configs/stm3240g-eval/kernel/Makefile
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
# This is the directory for the board-specific header files
|
||||
|
||||
BOARD_INCLUDE = $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include
|
||||
|
||||
# The entry point name (if none is provided in the .config file)
|
||||
|
||||
CONFIG_USER_ENTRYPOINT ?= user_start
|
||||
ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
|
||||
|
||||
# Get the paths to the libraries and the links script path in format that
|
||||
# is appropriate for the host OS
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
|
||||
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
|
||||
USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
|
||||
USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
|
||||
USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
|
||||
USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
|
||||
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
|
||||
USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
|
||||
USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
|
||||
USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
|
||||
USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
|
||||
endif
|
||||
|
||||
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
|
||||
USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS))))
|
||||
USER_LIBGCC = "${shell $(CC) -print-libgcc-file-name}"
|
||||
|
||||
# Source files
|
||||
|
||||
CSRCS = up_userspace.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
OBJS = $(COBJS)
|
||||
|
||||
# Targets:
|
||||
|
||||
all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map
|
||||
.PHONY: nuttx_user.elf depend clean distclean
|
||||
|
||||
$(COBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
# Create the nuttx_user.elf file containing all of the user-mode code
|
||||
|
||||
nuttx_user.elf: $(OBJS)
|
||||
$(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC)
|
||||
|
||||
$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
|
||||
@echo "LD: nuttx_user.elf"
|
||||
$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
|
||||
ifeq ($(CONFIG_INTELHEX_BINARY),y)
|
||||
@echo "CP: nuttx_user.hex"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_MOTOROLA_SREC),y)
|
||||
@echo "CP: nuttx_user.srec"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_RAW_BINARY),y)
|
||||
@echo "CP: nuttx_user.bin"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
|
||||
endif
|
||||
|
||||
$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
|
||||
@echo "MK: User.map"
|
||||
$(Q) $(NM) nuttx_user.elf >$(TOPDIR)$(DELIM)User.map
|
||||
$(Q) $(CROSSDEV)size nuttx_user.elf
|
||||
|
||||
.depend:
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
$(call DELFILE, nuttx_user.elf)
|
||||
$(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.*")
|
||||
$(call DELFILE, "$(TOPDIR)$(DELIM)User.map")
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
142
configs/stm3240g-eval/kernel/up_userspace.c
Normal file
142
configs/stm3240g-eval/kernel/up_userspace.c
Normal file
@ -0,0 +1,142 @@
|
||||
/****************************************************************************
|
||||
* configs/stm3240g-eval/kernel/up_userspace.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdlib.h>
|
||||
|
||||
#include <nuttx/userspace.h>
|
||||
#include <nuttx/wqueue.h>
|
||||
#include <nuttx/mm.h>
|
||||
|
||||
#if defined(CONFIG_NUTTX_KERNEL) && !defined(__KERNEL__)
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
#ifndef CONFIG_NUTTX_USERSPACE
|
||||
# error "CONFIG_NUTTX_USERSPACE not defined"
|
||||
#endif
|
||||
|
||||
#if CONFIG_NUTTX_USERSPACE != 0x08020000
|
||||
# error "CONFIG_NUTTX_USERSPACE must be 0x08020000 to match memory.ld"
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
/* These 'addresses' of these values are setup by the linker script. They are
|
||||
* not actual uint32_t storage locations! They are only used meaningfully in the
|
||||
* following way:
|
||||
*
|
||||
* - The linker script defines, for example, the symbol_sdata.
|
||||
* - The declareion extern uint32_t _sdata; makes C happy. C will believe
|
||||
* that the value _sdata is the address of a uint32_t variable _data (it is
|
||||
* not!).
|
||||
* - We can recoved the linker value then by simply taking the address of
|
||||
* of _data. like: uint32_t *pdata = &_sdata;
|
||||
*/
|
||||
|
||||
extern uint32_t _stext; /* Start of .text */
|
||||
extern uint32_t _etext; /* End_1 of .text + .rodata */
|
||||
extern const uint32_t _eronly; /* End+1 of read only section (.text + .rodata) */
|
||||
extern uint32_t _sdata; /* Start of .data */
|
||||
extern uint32_t _edata; /* End+1 of .data */
|
||||
extern uint32_t _sbss; /* Start of .bss */
|
||||
extern uint32_t _ebss; /* End+1 of .bss */
|
||||
|
||||
/* This is the user space entry point */
|
||||
|
||||
int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]);
|
||||
|
||||
const struct userspace_s userspace __attribute__ ((section (".userspace"))) =
|
||||
{
|
||||
/* General memory map */
|
||||
|
||||
.us_entrypoint = (main_t)CONFIG_USER_ENTRYPOINT,
|
||||
.us_textstart = (uintptr_t)&_stext,
|
||||
.us_textend = (uintptr_t)&_etext,
|
||||
.us_datasource = (uintptr_t)&_eronly,
|
||||
.us_datastart = (uintptr_t)&_sdata,
|
||||
.us_dataend = (uintptr_t)&_edata,
|
||||
.us_bssstart = (uintptr_t)&_sbss,
|
||||
.us_bssend = (uintptr_t)&_ebss,
|
||||
|
||||
/* Task/thread startup routines */
|
||||
|
||||
.task_startup = task_startup,
|
||||
#ifndef CONFIG_DISABLE_PTHREAD
|
||||
.pthread_startup = pthread_startup,
|
||||
#endif
|
||||
|
||||
/* Signal handler trampoline */
|
||||
|
||||
#ifndef CONFIG_DISABLE_SIGNALS
|
||||
.signal_handler = up_signal_handler,
|
||||
#endif
|
||||
|
||||
/* Memory manager entry points (declared in include/nuttx/mm.h) */
|
||||
|
||||
.mm_initialize = umm_initialize,
|
||||
.mm_addregion = umm_addregion,
|
||||
.mm_trysemaphore = umm_trysemaphore,
|
||||
.mm_givesemaphore = umm_givesemaphore,
|
||||
|
||||
/* Memory manager entry points (declared in include/stdlib.h) */
|
||||
|
||||
.mm_malloc = malloc,
|
||||
.mm_realloc = realloc,
|
||||
.mm_zalloc = zalloc,
|
||||
.mm_free = free,
|
||||
|
||||
/* User-space work queue support (declared in include/nuttx/wqueue.h) */
|
||||
|
||||
#if defined(CONFIG_SCHED_WORKQUEUE) && defined(CONFIG_SCHED_USRWORK)
|
||||
.work_usrstart = work_usrstart,
|
||||
#endif
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
#endif /* CONFIG_NUTTX_KERNEL && !__KERNEL__ */
|
||||
113
configs/stm3240g-eval/knxwm/Make.defs
Normal file
113
configs/stm3240g-eval/knxwm/Make.defs
Normal file
@ -0,0 +1,113 @@
|
||||
############################################################################
|
||||
# configs/stm3240g-eval/knxwm/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
|
||||
ARCHSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
|
||||
ARCHSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
1322
configs/stm3240g-eval/knxwm/defconfig
Normal file
1322
configs/stm3240g-eval/knxwm/defconfig
Normal file
File diff suppressed because it is too large
Load Diff
52
configs/stm3240g-eval/nxwm/appconfig → configs/stm3240g-eval/knxwm/setenv.sh
Normal file → Executable file
52
configs/stm3240g-eval/nxwm/appconfig → configs/stm3240g-eval/knxwm/setenv.sh
Normal file → Executable file
@ -1,7 +1,7 @@
|
||||
############################################################################
|
||||
# configs/stm3240g-eval/nxwm/appconfig
|
||||
#!/bin/bash
|
||||
# configs/stm3240g-eval/knxwm/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
@ -31,23 +31,37 @@
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# The NSH Library -- NOTE: The NxWM unit test must be installed at
|
||||
# apps/external in order to build this example. See
|
||||
# NxWidgets/UnitTests/README.txt for additional information
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
CONFIGURED_APPS += system/readline
|
||||
CONFIGURED_APPS += nshlib
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Networking libraries.
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
ifeq ($(CONFIG_NET),y)
|
||||
CONFIGURED_APPS += netutils/uiplib
|
||||
CONFIGURED_APPS += netutils/resolv
|
||||
CONFIGURED_APPS += netutils/webclient
|
||||
CONFIGURED_APPS += netutils/tftpc
|
||||
ifeq ($(CONFIG_NSH_TELNET),y)
|
||||
CONFIGURED_APPS += netutils/telnetd
|
||||
endif
|
||||
endif
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
File diff suppressed because it is too large
Load Diff
109
configs/stm3240g-eval/scripts/kernel-space.ld
Executable file
109
configs/stm3240g-eval/scripts/kernel-space.ld
Executable file
@ -0,0 +1,109 @@
|
||||
/****************************************************************************
|
||||
* configs/stm3240g-eval/scripts/kernel-space.ld
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* NOTE: This depends on the memory.ld script having been included prior to
|
||||
* this script.
|
||||
*/
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > kflash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > kflash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > kflash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > kflash
|
||||
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > ksram AT > kflash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > ksram
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@ -33,7 +33,7 @@
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||
/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 192Kb of SRAM. SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 112Kb of SRAM beginning at address 0x2000:0000
|
||||
|
||||
100
configs/stm3240g-eval/scripts/memory.ld
Normal file
100
configs/stm3240g-eval/scripts/memory.ld
Normal file
@ -0,0 +1,100 @@
|
||||
/****************************************************************************
|
||||
* configs/stm3240-eval/scripts/memory.ld
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 192Kb of SRAM. SRAM is split up into three blocks:
|
||||
*
|
||||
* 1) 112KB of SRAM beginning at address 0x2000:0000
|
||||
* 2) 16KB of SRAM beginning at address 0x2001:c000
|
||||
* 3) 64KB of CCM SRAM beginning at address 0x1000:0000
|
||||
*
|
||||
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
|
||||
* where the code expects to begin execution by jumping to the entry point in
|
||||
* the 0x0800:0000 address range.
|
||||
*
|
||||
* For MPU support, the kernel-mode NuttX section is assumed to be 128Kb of
|
||||
* FLASH and 4Kb of SRAM. That is an excessive amount for the kernel which
|
||||
* should fit into 64KB and, of course, can be optimized as needed (See
|
||||
* also configs/stm3240g-eval/scripts/kernel-space.ld). Allowing the
|
||||
* additional does permit addition debug instrumentation to be added to the
|
||||
* kernel space without overflowing the partition.
|
||||
*
|
||||
* Alignment of the user space FLASH partition is also a critical factor:
|
||||
* The user space FLASH partition will be spanned with a single region of
|
||||
* size 2**n bytes. The alignment of the user-space region must be the same.
|
||||
* As a consequence, as the user-space increases in size, the alignmment
|
||||
* requirement also increases.
|
||||
*
|
||||
* This alignment requirement means that the largest user space FLASH region
|
||||
* you can have will be 512KB at it would have to be positioned at
|
||||
* 0x08800000. If you change this address, don't forget to change the
|
||||
* CONFIG_NUTTX_USERSPACE configuration setting to match and to modify
|
||||
* the check in kernel/userspace.c.
|
||||
*
|
||||
* For the same reasons, the maximum size of the SRAM mapping is limited to
|
||||
* 4KB. Both of these alignment limitations could be reduced by using
|
||||
* multiple regions to map the FLASH/SDRAM range or perhaps with some
|
||||
* clever use of subregions.
|
||||
*
|
||||
* A detailed memory map for the 112KB SRAM region is as follows:
|
||||
*
|
||||
* 0x20000 0000: Kernel .data region. Typical size: 0.1KB
|
||||
* ------- ---- Kernel .bss region. Typical size: 1.8KB
|
||||
* 0x20000 0800: Kernel IDLE thread stack (approximate). Size is
|
||||
* determined by CONFIG_IDLETHREAD_STACKSIZE and
|
||||
* adjustments for alignment. Typical is 1KB.
|
||||
* ------- ---- Padded to 4KB
|
||||
* 0x20000 1000: User .data region. Size is variable.
|
||||
* ------- ---- User .bss region Size is variable.
|
||||
* 0x20000 2000: Beginning of kernel heap. Size determined by
|
||||
* CONFIG_MM_KERNEL_HEAPSIZE.
|
||||
* ------- ---- Beginning of user heap. Can vary with other settings.
|
||||
* 0x20001 c000: End+1 of CPU RAM
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
/* 1024Kb FLASH */
|
||||
|
||||
kflash (rx) : ORIGIN = 0x08000000, LENGTH = 128K
|
||||
uflash (rx) : ORIGIN = 0x08020000, LENGTH = 128K
|
||||
xflash (rx) : ORIGIN = 0x08040000, LENGTH = 768K
|
||||
|
||||
/* 112Kb of contiguous SRAM */
|
||||
|
||||
ksram (rwx) : ORIGIN = 0x20000000, LENGTH = 4K
|
||||
usram (rwx) : ORIGIN = 0x20001000, LENGTH = 4K
|
||||
xsram (rwx) : ORIGIN = 0x20001000, LENGTH = 104K
|
||||
}
|
||||
126
configs/stm3240g-eval/scripts/user-space.ld
Normal file
126
configs/stm3240g-eval/scripts/user-space.ld
Normal file
@ -0,0 +1,126 @@
|
||||
/****************************************************************************
|
||||
* configs/stm3240g-eval/scripts/user-space.ld
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* NOTE: This depends on the memory.ld script having been included prior to
|
||||
* this script.
|
||||
*/
|
||||
|
||||
/* Make sure that the critical memory management functions are in user-space.
|
||||
* the user heap memory manager will reside in user-space but be usable both
|
||||
* by kernel- and user-space code
|
||||
*/
|
||||
|
||||
EXTERN(umm_initialize)
|
||||
EXTERN(umm_addregion)
|
||||
EXTERN(umm_trysemaphore)
|
||||
EXTERN(umm_givesemaphore)
|
||||
|
||||
EXTERN(malloc)
|
||||
EXTERN(realloc)
|
||||
EXTERN(zalloc)
|
||||
EXTERN(free)
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
SECTIONS
|
||||
{
|
||||
.userspace : {
|
||||
*(.userspace)
|
||||
} > uflash
|
||||
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > uflash
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > uflash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > uflash
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > uflash
|
||||
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > usram AT > uflash
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > usram
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
@ -1,8 +1,7 @@
|
||||
/****************************************************************************************************
|
||||
* configs/stm3240g_eval/src/stm3240g_internal.h
|
||||
* arch/arm/src/board/stm3240g_internal.n
|
||||
*
|
||||
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -369,5 +368,24 @@ void stm32_selectlcd(void);
|
||||
void stm32_deselectlcd(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: nsh_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization for NSH.
|
||||
*
|
||||
* CONFIG_NSH_ARCHINIT=y :
|
||||
* Called from the NSH library
|
||||
*
|
||||
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
|
||||
* CONFIG_NSH_ARCHINIT=n :
|
||||
* Called from board_initialize().
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_NSH_LIBRARY
|
||||
int nsh_archinitialize(void);
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_STM3240G_EVAL_SRC_STM3240G_INTERNAL_H */
|
||||
|
||||
@ -1,8 +1,7 @@
|
||||
/************************************************************************************
|
||||
* configs/stm3240g-eval/src/up_boot.c
|
||||
* arch/arm/src/board/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -107,3 +106,30 @@ void stm32_boardinitialize(void)
|
||||
up_ledinit();
|
||||
#endif
|
||||
}
|
||||
/****************************************************************************
|
||||
* Name: board_initialize
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
|
||||
* initialization call will be performed in the boot-up sequence to a
|
||||
* function called board_initialize(). board_initialize() will be
|
||||
* called immediately after up_intiialize() is called and just before the
|
||||
* initial application is started. This additional initialization phase
|
||||
* may be used, for example, to initialize board-specific device drivers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_BOARD_INITIALIZE
|
||||
void board_initialize(void)
|
||||
{
|
||||
/* Perform NSH initialization here instead of from the NSH. This
|
||||
* alternative NSH initialization is necessary when NSH is ran in user-space
|
||||
* but the initialization function must run in kernel space.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
|
||||
(void)nsh_archinitialize();
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
@ -49,6 +49,7 @@ else
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
|
||||
ARCHSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
|
||||
Loading…
Reference in New Issue
Block a user