Add a simple touchscreen test
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3995 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
22e969a197
commit
a4da667e6b
@ -2110,4 +2110,11 @@
|
|||||||
* fs/fat: Fix an error in the long file name logic: If the long file name
|
* fs/fat: Fix an error in the long file name logic: If the long file name
|
||||||
is an even multiple of 13 bytes in length, then it should not include a
|
is an even multiple of 13 bytes in length, then it should not include a
|
||||||
NULL terminating character. Fix contributed by Kaushal Parikh.
|
NULL terminating character. Fix contributed by Kaushal Parikh.
|
||||||
|
* configs/sim/nx11 - Created a separate configuration to build the NX
|
||||||
|
example using the a simulated framebuffer driver on an X11 window. This
|
||||||
|
example has been verified on Ubuntu 9.09 (it does not work on Cygwin).
|
||||||
|
* arch/sim/src/up_touchscreen.c and up_x11eventloop.c - Adds support for a
|
||||||
|
simulated NuttX touchscreen device using mouse/pointer feedback from an
|
||||||
|
x11 window.
|
||||||
|
* configs/sim/touchscreen - Adds a configuration to verify the simulated
|
||||||
|
touchscreen driver (Does not work on Cygwin).
|
||||||
|
|||||||
@ -81,7 +81,7 @@ endif
|
|||||||
|
|
||||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||||
|
|
||||||
NXOBJS = $(AOBJS) $(COBJS)
|
NUTTXOBJS = $(AOBJS) $(COBJS)
|
||||||
HOSTOBJS = $(HOSTSRCS:.c=$(OBJEXT))
|
HOSTOBJS = $(HOSTSRCS:.c=$(OBJEXT))
|
||||||
|
|
||||||
SRCS = $(ASRCS) $(CSRCS) $(HOSTSRCS)
|
SRCS = $(ASRCS) $(CSRCS) $(HOSTSRCS)
|
||||||
@ -104,11 +104,22 @@ endif
|
|||||||
|
|
||||||
STDLIBS += -lc
|
STDLIBS += -lc
|
||||||
|
|
||||||
|
# Determine which NuttX libraries will need to be linked in
|
||||||
|
# Most are provided by LINKLIBS on the MAKE command line
|
||||||
|
|
||||||
LINKOBJS = up_head$(OBJEXT)
|
LINKOBJS = up_head$(OBJEXT)
|
||||||
LINKLIBS =
|
LINKLIBS =
|
||||||
LDPATHS = $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
|
LDPATHS = $(addprefix -L$(TOPDIR)/,$(dir $(LINKLIBS)))
|
||||||
LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
|
LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(LINKLIBS))))
|
||||||
|
|
||||||
|
# Add the board-specific library and directory
|
||||||
|
|
||||||
|
BOARDDIR = $(TOPDIR)/configs/sim/src
|
||||||
|
LDPATHS += -L $(BOARDDIR)
|
||||||
|
LDLIBS += -lboard
|
||||||
|
|
||||||
|
# Make targets begin here
|
||||||
|
|
||||||
all: up_head$(OBJEXT) libarch$(LIBEXT)
|
all: up_head$(OBJEXT) libarch$(LIBEXT)
|
||||||
.PHONY: export_head clean distclean cleanrel depend
|
.PHONY: export_head clean distclean cleanrel depend
|
||||||
|
|
||||||
@ -123,11 +134,19 @@ $(HOSTOBJS): %$(OBJEXT): %.c
|
|||||||
@$(CC) -c $(HOSTCFLAGS) $< -o $@
|
@$(CC) -c $(HOSTCFLAGS) $< -o $@
|
||||||
|
|
||||||
# The architecture-specific library
|
# The architecture-specific library
|
||||||
libarch$(LIBEXT): $(NXOBJS)
|
|
||||||
@( for obj in $(NXOBJS) ; do \
|
libarch$(LIBEXT): $(NUTTXOBJS)
|
||||||
|
@( for obj in $(NUTTXOBJS) ; do \
|
||||||
$(call ARCHIVE, $@, $${obj}); \
|
$(call ARCHIVE, $@, $${obj}); \
|
||||||
done ; )
|
done ; )
|
||||||
|
|
||||||
|
# The "board"-specific library. Of course, there really are no boards in
|
||||||
|
# the simulation. However, this is a good place to keep parts of the simulation
|
||||||
|
# that are not hardware-related.
|
||||||
|
|
||||||
|
$(BOARDDIR)/libboard$(LIBEXT):
|
||||||
|
@$(MAKE) -C $(BOARDDIR) TOPDIR="$(TOPDIR)" libboard$(LIBEXT) EXTRADEFINES=$(EXTRADEFINES)
|
||||||
|
|
||||||
# A partially linked object containing only NuttX code (no interface to host OS)
|
# A partially linked object containing only NuttX code (no interface to host OS)
|
||||||
# Change the names of most symbols that conflict with libc symbols.
|
# Change the names of most symbols that conflict with libc symbols.
|
||||||
|
|
||||||
@ -140,7 +159,7 @@ GNU/Linux-names.dat: GNU nuttx-names.dat
|
|||||||
Cygwin-names.dat: nuttx-names.dat
|
Cygwin-names.dat: nuttx-names.dat
|
||||||
@cat $^ | sed -e "s/^/_/g" >$@
|
@cat $^ | sed -e "s/^/_/g" >$@
|
||||||
|
|
||||||
nuttx.rel : libarch$(LIBEXT) $(HOSTOS)-names.dat $(LINKOBJS)
|
nuttx.rel : libarch$(LIBEXT) $(BOARDDIR)/libboard$(LIBEXT) $(HOSTOS)-names.dat $(LINKOBJS)
|
||||||
@echo "LD: nuttx.rel"
|
@echo "LD: nuttx.rel"
|
||||||
@$(LD) -r $(LDFLAGS) $(LDPATHS) -o $@ $(LINKOBJS) --start-group $(LDLIBS) --end-group $(EXTRA_LIBS)
|
@$(LD) -r $(LDFLAGS) $(LDPATHS) -o $@ $(LINKOBJS) --start-group $(LDLIBS) --end-group $(EXTRA_LIBS)
|
||||||
@$(OBJCOPY) --redefine-syms=$(HOSTOS)-names.dat $@
|
@$(OBJCOPY) --redefine-syms=$(HOSTOS)-names.dat $@
|
||||||
|
|||||||
@ -714,7 +714,7 @@ void sim_tcuninitialize(void)
|
|||||||
(void)snprintf(devname, DEV_NAMELEN, DEV_FORMAT, priv->minor);
|
(void)snprintf(devname, DEV_NAMELEN, DEV_FORMAT, priv->minor);
|
||||||
ivdbg("Un-registering %s\n", devname);
|
ivdbg("Un-registering %s\n", devname);
|
||||||
|
|
||||||
ret = runegister_driver(devname);
|
ret = unregister_driver(devname);
|
||||||
if (ret < 0)
|
if (ret < 0)
|
||||||
{
|
{
|
||||||
idbg("uregister_driver() failed: %d\n", ret);
|
idbg("uregister_driver() failed: %d\n", ret);
|
||||||
|
|||||||
@ -208,7 +208,7 @@ nx
|
|||||||
|
|
||||||
CONFIG_SIM_X11FB - Use X11 window for framebuffer
|
CONFIG_SIM_X11FB - Use X11 window for framebuffer
|
||||||
|
|
||||||
See the nx11 configuration below for more information.
|
See the "nx11" configuration below for more information.
|
||||||
|
|
||||||
Multi- and Single-User Modes
|
Multi- and Single-User Modes
|
||||||
----------------------------
|
----------------------------
|
||||||
@ -267,7 +267,8 @@ nx11
|
|||||||
CONFIG_SIM_TOUCHSCREEN=y
|
CONFIG_SIM_TOUCHSCREEN=y
|
||||||
|
|
||||||
Then you must also have some application logic that will call
|
Then you must also have some application logic that will call
|
||||||
sim_tcinitializ(0) to register the touchscreen driver.
|
sim_tcinitialize(0) to register the touchscreen driver. See
|
||||||
|
also configuration "touchscreen"
|
||||||
|
|
||||||
NOTES:
|
NOTES:
|
||||||
|
|
||||||
@ -322,3 +323,24 @@ pashello
|
|||||||
|
|
||||||
cd <nuttx-directory>/tools
|
cd <nuttx-directory>/tools
|
||||||
./configure.sh sim/pashello
|
./configure.sh sim/pashello
|
||||||
|
|
||||||
|
touchscreen
|
||||||
|
|
||||||
|
Description
|
||||||
|
-----------
|
||||||
|
This configuration uses the simple touchscreen test at
|
||||||
|
apps/examples/touchscreen. This test will create an empty X11 window
|
||||||
|
and will print the touchscreen output as it is received from the
|
||||||
|
simulated touchscreen driver. This configuration may
|
||||||
|
by selected as follows:
|
||||||
|
|
||||||
|
cd <nuttx-directory>/tools
|
||||||
|
./configure.sh sim/touchscreen
|
||||||
|
|
||||||
|
Since this example uses the simulated frame buffer driver, the
|
||||||
|
most of the configuration settings discussed for the "nx11"
|
||||||
|
configuration also apply here. See that discussion above.
|
||||||
|
|
||||||
|
See apps/examples/README.txt for further information about build
|
||||||
|
requirements and configuration settings.
|
||||||
|
|
||||||
|
|||||||
@ -1,7 +1,7 @@
|
|||||||
############################################################################
|
############################################################################
|
||||||
# configs/sim/src/Makefile
|
# configs/sim/src/Makefile
|
||||||
#
|
#
|
||||||
# Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
|
# Copyright (C) 2007, 2008, 2011 Gregory Nutt. All rights reserved.
|
||||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
#
|
#
|
||||||
# Redistribution and use in source and binary forms, with or without
|
# Redistribution and use in source and binary forms, with or without
|
||||||
@ -33,13 +33,19 @@
|
|||||||
#
|
#
|
||||||
############################################################################
|
############################################################################
|
||||||
|
|
||||||
-include $(TOPDIR)/Make.defs
|
include $(TOPDIR)/Make.defs
|
||||||
|
|
||||||
CFLAGS += -I$(TOPDIR)/sched
|
CFLAGS += -I$(TOPDIR)/sched
|
||||||
|
|
||||||
ASRCS =
|
ASRCS =
|
||||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||||
|
|
||||||
CSRCS =
|
CSRCS =
|
||||||
|
ifeq ($(CONFIG_SIM_X11FB),y)
|
||||||
|
ifeq ($(CONFIG_SIM_TOUCHSCREEN),y)
|
||||||
|
CSRCS += up_touchscreen.c
|
||||||
|
endif
|
||||||
|
endif
|
||||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||||
|
|
||||||
SRCS = $(ASRCS) $(CSRCS)
|
SRCS = $(ASRCS) $(CSRCS)
|
||||||
@ -54,9 +60,12 @@ $(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
|||||||
$(call COMPILE, $<, $@)
|
$(call COMPILE, $<, $@)
|
||||||
|
|
||||||
libboard$(LIBEXT): $(OBJS)
|
libboard$(LIBEXT): $(OBJS)
|
||||||
|
@$(AR) $@ # Create an empty archive
|
||||||
|
ifneq ($(OBJS),)
|
||||||
@( for obj in $(OBJS) ; do \
|
@( for obj in $(OBJS) ; do \
|
||||||
$(call ARCHIVE, $@, $${obj}); \
|
$(call ARCHIVE, $@, $${obj}); \
|
||||||
done ; )
|
done ; )
|
||||||
|
endif
|
||||||
|
|
||||||
.depend: Makefile $(SRCS)
|
.depend: Makefile $(SRCS)
|
||||||
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||||
|
|||||||
182
configs/sim/src/up_touchscreen.c
Normal file
182
configs/sim/src/up_touchscreen.c
Normal file
@ -0,0 +1,182 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* config/sim/src/up_touchscreen.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <sys/types.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <errno.h>
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <nuttx/fb.h>
|
||||||
|
#include <nuttx/input/touchscreen.h>
|
||||||
|
#include <nuttx/nx/nx.h>
|
||||||
|
#include <nuttx/nx/nxglib.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
/* Configuration ************************************************************/
|
||||||
|
/* Pick a background color */
|
||||||
|
|
||||||
|
#ifndef CONFIG_EXAMPLES_TOUCHSCREEN_BGCOLOR
|
||||||
|
# define CONFIG_EXAMPLES_TOUCHSCREEN_BGCOLOR 0x007b68ee
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Types
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
struct sim_touchscreen_s
|
||||||
|
{
|
||||||
|
NXHANDLE hnx;
|
||||||
|
};
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static struct sim_touchscreen_s g_simtc;
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: arch_tcinitialize()
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform architecuture-specific initialization of the touchscreen
|
||||||
|
* hardware. This interface must be provided by all configurations
|
||||||
|
* using apps/examples/touchscreen
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int arch_tcinitialize(int minor)
|
||||||
|
{
|
||||||
|
FAR NX_DRIVERTYPE *dev;
|
||||||
|
nxgl_mxpixel_t color;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* Initialize the simulated frame buffer device. We need to create an
|
||||||
|
* X11 window to support the mouse-driven touchscreen simulation.
|
||||||
|
*/
|
||||||
|
|
||||||
|
ivdbg("Initializing framebuffer\n");
|
||||||
|
ret = up_fbinitialize();
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
idbg("up_fbinitialize failed: %d\n", -ret);
|
||||||
|
goto errout;
|
||||||
|
}
|
||||||
|
|
||||||
|
dev = up_fbgetvplane(0);
|
||||||
|
if (!dev)
|
||||||
|
{
|
||||||
|
idbg("up_fbgetvplane 0 failed\n");
|
||||||
|
ret = -ENODEV;
|
||||||
|
goto errout_with_fb;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Then open NX */
|
||||||
|
|
||||||
|
ivdbg("Open NX\n");
|
||||||
|
g_simtc.hnx = nx_open(dev);
|
||||||
|
if (!g_simtc.hnx)
|
||||||
|
{
|
||||||
|
ret = -errno;
|
||||||
|
idbg("nx_open failed: %d\n", ret);
|
||||||
|
goto errout_with_fb;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Set the background to the configured background color */
|
||||||
|
|
||||||
|
ivdbg("Set background color=%d\n", CONFIG_EXAMPLES_TOUCHSCREEN_BGCOLOR);
|
||||||
|
|
||||||
|
color = CONFIG_EXAMPLES_TOUCHSCREEN_BGCOLOR;
|
||||||
|
ret = nx_setbgcolor(g_simtc.hnx, &color);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
idbg("nx_setbgcolor failed: %d\n", ret);
|
||||||
|
goto errout_with_nx;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Finally, initialize the touchscreen simulation on the X window */
|
||||||
|
|
||||||
|
ret = sim_tcinitialize(minor);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
idbg("sim_tcinitialize failed: %d\n", ret);
|
||||||
|
goto errout_with_nx;
|
||||||
|
}
|
||||||
|
return OK;
|
||||||
|
|
||||||
|
errout_with_nx:
|
||||||
|
nx_close(g_simtc.hnx);
|
||||||
|
goto errout;
|
||||||
|
errout_with_fb:
|
||||||
|
fb_uninitialize();
|
||||||
|
errout:
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: arch_tcuninitialize()
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform architecuture-specific un-initialization of the touchscreen
|
||||||
|
* hardware. This interface must be provided by all configurations
|
||||||
|
* using apps/examples/touchscreen
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void arch_tcuninitialize(void)
|
||||||
|
{
|
||||||
|
/* Shut down the touchscreen driver */
|
||||||
|
|
||||||
|
sim_tcuninitialize();
|
||||||
|
|
||||||
|
/* Close NX */
|
||||||
|
|
||||||
|
nx_close(g_simtc.hnx);
|
||||||
|
}
|
||||||
110
configs/sim/touchscreen/Make.defs
Normal file
110
configs/sim/touchscreen/Make.defs
Normal file
@ -0,0 +1,110 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/sim/touchscreen/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
HOSTOS = ${shell uname -o 2>/dev/null || echo "Other"}
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCPUFLAGS = -fno-builtin
|
||||||
|
ARCHPICFLAGS = -fpic
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHSCRIPT =
|
||||||
|
|
||||||
|
CROSSDEV =
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||||
|
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
|
||||||
|
ifeq ($(HOSTOS),Cygwin)
|
||||||
|
EXEEXT = .exe
|
||||||
|
else
|
||||||
|
EXEEXT =
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define PREPROCESS
|
||||||
|
@echo "CPP: $1->$2"
|
||||||
|
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \
|
||||||
|
$(ARCHCPUFLAGS) $(HOSTINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
39
configs/sim/touchscreen/appconfig
Normal file
39
configs/sim/touchscreen/appconfig
Normal file
@ -0,0 +1,39 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/sim/touchscreen/appconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
# Path to example in apps/examples containing the user_start entry point
|
||||||
|
|
||||||
|
CONFIGURED_APPS += examples/touchscreen
|
||||||
|
|
||||||
595
configs/sim/touchscreen/defconfig
Normal file
595
configs/sim/touchscreen/defconfig
Normal file
@ -0,0 +1,595 @@
|
|||||||
|
############################################################################
|
||||||
|
# sim/touchscreen/defconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# Architecture selection
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||||
|
# processor architecture.
|
||||||
|
# CONFIG_ARCH_name - for use in C code. This identifies the particular
|
||||||
|
# processor architecture (CONFIG_ARCH_SIM).
|
||||||
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||||
|
# the board that supports the particular chip or SoC.
|
||||||
|
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||||
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||||
|
#
|
||||||
|
CONFIG_ARCH=sim
|
||||||
|
CONFIG_ARCH_SIM=y
|
||||||
|
CONFIG_ARCH_BOARD=sim
|
||||||
|
CONFIG_ARCH_BOARD_SIM=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Simulated framebuffer configuration
|
||||||
|
#
|
||||||
|
CONFIG_SIM_X11FB=y
|
||||||
|
CONFIG_SIM_FBWIDTH=240
|
||||||
|
CONFIG_SIM_FBHEIGHT=320
|
||||||
|
CONFIG_SIM_FBBPP=32
|
||||||
|
|
||||||
|
#
|
||||||
|
# Simulated touchscreen configuration
|
||||||
|
# (Set both of the following to 'y' to enable)
|
||||||
|
#
|
||||||
|
CONFIG_INPUT=y
|
||||||
|
CONFIG_SIM_TOUCHSCREEN=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# General OS setup
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR - Identifies the relative path to the directory
|
||||||
|
# that builds the application to link with NuttX. Default: ../apps
|
||||||
|
# CONFIG_DEBUG - enables built-in debug options
|
||||||
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||||
|
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||||
|
# debug symbols (needed for use with a debugger).
|
||||||
|
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||||
|
# regions of memory to allocate from, this specifies the
|
||||||
|
# number of memory regions that the memory manager must
|
||||||
|
# handle and enables the API mm_addregion(start, end);
|
||||||
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||||
|
# time console output
|
||||||
|
# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
|
||||||
|
# or MSEC_PER_TICK=10. This setting may be defined to
|
||||||
|
# inform NuttX that the processor hardware is providing
|
||||||
|
# system timer interrupts at some interrupt interval other
|
||||||
|
# than 10 msec.
|
||||||
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||||
|
# this number of milliseconds; Round robin scheduling can
|
||||||
|
# be disabled by setting this value to zero.
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||||
|
# scheduler to monitor system performance
|
||||||
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||||
|
# task name to save in the TCB. Useful if scheduler
|
||||||
|
# instrumentation is selected. Set to zero to disable.
|
||||||
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions
|
||||||
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||||
|
# Used to initialize the internal time logic.
|
||||||
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||||
|
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||||
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||||
|
# driver (minimul support)
|
||||||
|
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||||
|
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||||
|
# inheritance on mutexes and semaphores.
|
||||||
|
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||||
|
# inheritance is enabled. It defines the maximum number of
|
||||||
|
# different threads (minus one) that can take counts on a
|
||||||
|
# semaphore with priority inheritance support. This may be
|
||||||
|
# set to zero if priority inheritance is disabled OR if you
|
||||||
|
# are only using semaphores as mutexes (only one holder) OR
|
||||||
|
# if no more than two threads participate using a counting
|
||||||
|
# semaphore.
|
||||||
|
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||||
|
# then this setting is the maximum number of higher priority
|
||||||
|
# threads (minus 1) than can be waiting for another thread
|
||||||
|
# to release a count on a semaphore. This value may be set
|
||||||
|
# to zero if no more than one thread is expected to wait for
|
||||||
|
# a semaphore.
|
||||||
|
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||||
|
# by task_create() when a new task is started. If set, all
|
||||||
|
# files/drivers will appear to be closed in the new task.
|
||||||
|
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||||
|
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||||
|
# when a new task is started. If set, all files/drivers will
|
||||||
|
# appear to be closed in the new task except for stdin, stdout,
|
||||||
|
# and stderr.
|
||||||
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||||
|
# desciptors by task_create() when a new task is started. If
|
||||||
|
# set, all sockets will appear to be closed in the new task.
|
||||||
|
#
|
||||||
|
#CONFIG_APPS_DIR=
|
||||||
|
CONFIG_DEBUG=y
|
||||||
|
CONFIG_DEBUG_VERBOSE=y
|
||||||
|
CONFIG_DEBUG_SYMBOLS=n
|
||||||
|
CONFIG_DEBUG_INPUT=y
|
||||||
|
CONFIG_DEBUG_GRAPHICS=n
|
||||||
|
CONFIG_MM_REGIONS=1
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_RR_INTERVAL=0
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
|
CONFIG_TASK_NAME_SIZE=32
|
||||||
|
CONFIG_START_YEAR=2008
|
||||||
|
CONFIG_START_MONTH=11
|
||||||
|
CONFIG_START_DAY=28
|
||||||
|
CONFIG_JULIAN_TIME=n
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=n
|
||||||
|
CONFIG_MUTEX_TYPES=n
|
||||||
|
CONFIG_PRIORITY_INHERITANCE=n
|
||||||
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||||
|
CONFIG_SEM_NNESTPRIO=0
|
||||||
|
CONFIG_FDCLONE_DISABLE=n
|
||||||
|
CONFIG_FDCLONE_STDIO=n
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# The following can be used to disable categories of
|
||||||
|
# APIs supported by the OS. If the compiler supports
|
||||||
|
# weak functions, then it should not be necessary to
|
||||||
|
# disable functions unless you want to restrict usage
|
||||||
|
# of those APIs.
|
||||||
|
#
|
||||||
|
# There are certain dependency relationships in these
|
||||||
|
# features.
|
||||||
|
#
|
||||||
|
# o mq_notify logic depends on signals to awaken tasks
|
||||||
|
# waiting for queues to become full or empty.
|
||||||
|
# o pthread_condtimedwait() depends on signals to wake
|
||||||
|
# up waiting tasks.
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_CLOCK=n
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=y
|
||||||
|
CONFIG_DISABLE_PTHREAD=n
|
||||||
|
CONFIG_DISABLE_SIGNALS=n
|
||||||
|
CONFIG_DISABLE_MQUEUE=n
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Misc libc settings
|
||||||
|
#
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||||
|
# little smaller if we do not support fieldwidthes
|
||||||
|
#
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Allow for architecture optimized implementations
|
||||||
|
#
|
||||||
|
# The architecture can provide optimized versions of the
|
||||||
|
# following to improve sysem performance
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_MEMCPY=n
|
||||||
|
CONFIG_ARCH_MEMCMP=n
|
||||||
|
CONFIG_ARCH_MEMMOVE=n
|
||||||
|
CONFIG_ARCH_MEMSET=n
|
||||||
|
CONFIG_ARCH_STRCMP=n
|
||||||
|
CONFIG_ARCH_STRCPY=n
|
||||||
|
CONFIG_ARCH_STRNCPY=n
|
||||||
|
CONFIG_ARCH_STRLEN=n
|
||||||
|
CONFIG_ARCH_STRNLEN=n
|
||||||
|
CONFIG_ARCH_BZERO=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# General build options
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||||
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||||
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||||
|
# different loaders using the GNU objcopy program. This option
|
||||||
|
# should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||||
|
#
|
||||||
|
CONFIG_RRLOAD_BINARY=n
|
||||||
|
CONFIG_INTELHEX_BINARY=n
|
||||||
|
CONFIG_RAW_BINARY=n
|
||||||
|
CONFIG_HAVE_LIBM=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||||
|
# active tasks. This value must be a power of two.
|
||||||
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||||
|
# of parameters that a task may receive (i.e., maxmum value
|
||||||
|
# of 'argc')
|
||||||
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||||
|
# specific data that can be retained
|
||||||
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||||
|
# descriptors (one for each open)
|
||||||
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||||
|
# can be fopen'ed
|
||||||
|
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||||
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||||
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||||
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# message structures to minimize dynamic allocations
|
||||||
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||||
|
# a fixed payload size given by this settin (does not include
|
||||||
|
# other message structure overhead.
|
||||||
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||||
|
# can be passed to a watchdog handler
|
||||||
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# watchdog structures to minimize dynamic allocations
|
||||||
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||||
|
# timer structures. The system manages a pool of preallocated
|
||||||
|
# timer structures to minimize dynamic allocations. Set to
|
||||||
|
# zero for all dynamic allocations.
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=16
|
||||||
|
CONFIG_NFILE_STREAMS=16
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=1024
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=32
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=4
|
||||||
|
CONFIG_PREALLOC_WDOGS=32
|
||||||
|
CONFIG_PREALLOC_TIMERS=8
|
||||||
|
|
||||||
|
#
|
||||||
|
# Framebuffer driver options
|
||||||
|
CONFIG_FB_CMAP=y
|
||||||
|
CONFIG_FB_HWCURSOR=n
|
||||||
|
CONFIG_FB_HWCURSORIMAGE=n
|
||||||
|
#CONFIG_FB_HWCURSORSIZE
|
||||||
|
#CONFIG_FB_TRANSPARENCY
|
||||||
|
|
||||||
|
#
|
||||||
|
# FAT filesystem configuration
|
||||||
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# TCP/IP and UDP support via uIP
|
||||||
|
# CONFIG_NET - Enable or disable all network features
|
||||||
|
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||||
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||||
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||||
|
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||||
|
# CONFIG_NET_TCP - TCP support on or off
|
||||||
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||||
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||||
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||||
|
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||||
|
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||||
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||||
|
# CONFIG_NET_UDP - UDP support on or off
|
||||||
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||||
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||||
|
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||||
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||||
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||||
|
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||||
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||||
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||||
|
# CONFIG_NET_BROADCAST - Broadcast support
|
||||||
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||||
|
#
|
||||||
|
CONFIG_NET=n
|
||||||
|
CONFIG_NET_IPv6=n
|
||||||
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||||
|
CONFIG_NET_SOCKOPTS=y
|
||||||
|
CONFIG_NET_BUFSIZE=420
|
||||||
|
CONFIG_NET_TCP=n
|
||||||
|
CONFIG_NET_TCP_CONNS=40
|
||||||
|
CONFIG_NET_MAX_LISTENPORTS=40
|
||||||
|
CONFIG_NET_UDP=n
|
||||||
|
CONFIG_NET_UDP_CHECKSUMS=y
|
||||||
|
#CONFIG_NET_UDP_CONNS=10
|
||||||
|
CONFIG_NET_ICMP=n
|
||||||
|
CONFIG_NET_ICMP_PING=n
|
||||||
|
#CONFIG_NET_PINGADDRCONF=0
|
||||||
|
CONFIG_NET_STATISTICS=y
|
||||||
|
#CONFIG_NET_RECEIVE_WINDOW=
|
||||||
|
#CONFIG_NET_ARPTAB_SIZE=8
|
||||||
|
CONFIG_NET_BROADCAST=n
|
||||||
|
#CONFIG_NET_FWCACHE_SIZE=2
|
||||||
|
|
||||||
|
#
|
||||||
|
# UIP Network Utilities
|
||||||
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||||
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||||
|
CONFIG_NET_DHCP_LIGHT=n
|
||||||
|
CONFIG_NET_RESOLV_ENTRIES=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics related configuration settings
|
||||||
|
#
|
||||||
|
# CONFIG_NX
|
||||||
|
# Enables overall support for graphics library and NX
|
||||||
|
# CONFIG_NX_MULTIUSER
|
||||||
|
# Configures NX in multi-user mode
|
||||||
|
# CONFIG_NX_NPLANES
|
||||||
|
# Some YUV color formats requires support for multiple planes,
|
||||||
|
# one for each color component. Unless you have such special
|
||||||
|
# hardware, this value should be undefined or set to 1
|
||||||
|
# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP,
|
||||||
|
# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP,
|
||||||
|
# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and
|
||||||
|
# CONFIG_NX_DISABLE_32BPP
|
||||||
|
# NX supports a variety of pixel depths. You can save some
|
||||||
|
# memory by disabling support for unused color depths.
|
||||||
|
# CONFIG_NX_PACKEDMSFIRST
|
||||||
|
# If a pixel depth of less than 8-bits is used, then NX needs
|
||||||
|
# to know if the pixels pack from the MS to LS or from LS to MS
|
||||||
|
# CONFIG_NX_MOUSE
|
||||||
|
# Build in support for mouse input
|
||||||
|
# CONFIG_NX_KBD
|
||||||
|
# Build in support of keypad/keyboard input
|
||||||
|
# CONFIG_NXTK_BORDERWIDTH
|
||||||
|
# Specifies with with of the border (in pixels) used with
|
||||||
|
# framed windows. The default is 4.
|
||||||
|
# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2
|
||||||
|
# Specify the colors of the border used with framed windows.
|
||||||
|
# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so
|
||||||
|
# is normally darker. The default is medium and dark grey,
|
||||||
|
# respectively
|
||||||
|
# CONFIG_NXTK_AUTORAISE
|
||||||
|
# If set, a window will be raised to the top if the mouse position
|
||||||
|
# is over a visible portion of the window. Default: A mouse
|
||||||
|
# button must be clicked over a visible portion of the window.
|
||||||
|
# CONFIG_NXFONTS_CHARBITS
|
||||||
|
# The number of bits in the character set. Current options are
|
||||||
|
# only 7 and 8. The default is 7.
|
||||||
|
# CONFIG_NXFONT_SANS23X27
|
||||||
|
# At present, there is only one font. But if there were were more,
|
||||||
|
# then this option would select the sans serif font.
|
||||||
|
#
|
||||||
|
# NX Multi-user only options:
|
||||||
|
#
|
||||||
|
# CONFIG_NX_BLOCKING
|
||||||
|
# Open the client message queues in blocking mode. In this case,
|
||||||
|
# nx_eventhandler() will not return until a message is received and processed.
|
||||||
|
# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS
|
||||||
|
# Specifies the maximum number of messages that can fit in
|
||||||
|
# the message queues. No additional resources are allocated, but
|
||||||
|
# this can be set to prevent flooding of the client or server with
|
||||||
|
# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many
|
||||||
|
# messages are pre-allocated).
|
||||||
|
#
|
||||||
|
CONFIG_NX=y
|
||||||
|
CONFIG_NX_MULTIUSER=n
|
||||||
|
CONFIG_NX_NPLANES=1
|
||||||
|
CONFIG_NX_DISABLE_1BPP=y
|
||||||
|
CONFIG_NX_DISABLE_2BPP=y
|
||||||
|
CONFIG_NX_DISABLE_4BPP=y
|
||||||
|
CONFIG_NX_DISABLE_8BPP=y
|
||||||
|
CONFIG_NX_DISABLE_16BPP=y
|
||||||
|
CONFIG_NX_DISABLE_24BPP=y
|
||||||
|
CONFIG_NX_DISABLE_32BPP=n
|
||||||
|
CONFIG_NX_PACKEDMSFIRST=n
|
||||||
|
CONFIG_NX_MOUSE=y
|
||||||
|
CONFIG_NX_KBD=y
|
||||||
|
#CONFIG_NXTK_BORDERWIDTH=4
|
||||||
|
#CONFIG_NXTK_BORDERCOLOR1
|
||||||
|
#CONFIG_NXTK_BORDERCOLOR2
|
||||||
|
CONFIG_NXTK_AUTORAISE=n
|
||||||
|
CONFIG_NXFONT_SANS23X27=y
|
||||||
|
CONFIG_NXFONTS_CHARBITS=7
|
||||||
|
CONFIG_NX_BLOCKING=y
|
||||||
|
CONFIG_NX_MXSERVERMSGS=32
|
||||||
|
CONFIG_NX_MXCLIENTMSGS=16
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/uip
|
||||||
|
CONFIG_EXAMPLE_UIP_IPADDR=(192<<24|168<<16|0<<8|128)
|
||||||
|
CONFIG_EXAMPLE_UIP_DRIPADDR=(192<<24|168<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nettest
|
||||||
|
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_IPADDR=(192<<24|168<<16|0<<8|128)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(192<<24|168<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(192<<24|168<<16|0<<8|106)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/ostest
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=100
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=8192
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for apps/nshlib
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||||
|
# CONFIG_NSH_STRERROR - Use strerror(errno)
|
||||||
|
# CONFIG_NSH_LINELEN - Maximum length of one command line
|
||||||
|
# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
|
||||||
|
# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||||
|
# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
|
||||||
|
# CONFIG_NSH_DISABLEBG - Disable background commands
|
||||||
|
# CONFIG_NSH_ROMFSETC - Use startup script in /etc
|
||||||
|
# CONFIG_NSH_CONSOLE - Use serial console front end
|
||||||
|
# CONFIG_NSH_TELNET - Use telnetd console front end
|
||||||
|
#
|
||||||
|
# If CONFIG_NSH_TELNET is selected:
|
||||||
|
# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||||
|
# CONFIG_NSH_DHCPC - Obtain address using DHCP
|
||||||
|
# CONFIG_NSH_IPADDR - Provides static IP address
|
||||||
|
# CONFIG_NSH_DRIPADDR - Provides static router IP address
|
||||||
|
# CONFIG_NSH_NETMASK - Provides static network mask
|
||||||
|
# CONFIG_NSH_NOMAC - Use a bogus MAC address
|
||||||
|
#
|
||||||
|
# If CONFIG_NSH_ROMFSETC is selected:
|
||||||
|
# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||||
|
# CONFIG_NSH_INITSCRIPT - Relative path to init script
|
||||||
|
# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||||
|
# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||||
|
# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
|
||||||
|
# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
|
||||||
|
# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
|
||||||
|
# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||||
|
CONFIG_NSH_FILEIOSIZE=1024
|
||||||
|
CONFIG_NSH_STRERROR=n
|
||||||
|
CONFIG_NSH_LINELEN=80
|
||||||
|
CONFIG_NSH_STACKSIZE=4096
|
||||||
|
CONFIG_NSH_NESTDEPTH=3
|
||||||
|
CONFIG_NSH_DISABLESCRIPT=n
|
||||||
|
CONFIG_NSH_DISABLEBG=n
|
||||||
|
CONFIG_NSH_ROMFSETC=y
|
||||||
|
CONFIG_NSH_CONSOLE=y
|
||||||
|
CONFIG_NSH_TELNET=n
|
||||||
|
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||||
|
CONFIG_NSH_DHCPC=n
|
||||||
|
CONFIG_NSH_NOMAC=n
|
||||||
|
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
||||||
|
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
||||||
|
CONFIG_NSH_ROMFSDEVNO=1
|
||||||
|
CONFIG_NSH_ROMFSSECTSIZE=64
|
||||||
|
CONFIG_NSH_FATDEVNO=2
|
||||||
|
CONFIG_NSH_FATSECTSIZE=512
|
||||||
|
CONFIG_NSH_FATNSECTORS=1024
|
||||||
|
CONFIG_NSH_FATMOUNTPT=/tmp
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nx
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame-
|
||||||
|
# buffer driver for use in the test. Default: 0
|
||||||
|
# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP.
|
||||||
|
# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options
|
||||||
|
# include 2, 4, 8, 16, 24, and 32. Default is 32.
|
||||||
|
# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to
|
||||||
|
# use pretty, framed NXTK windows with toolbars.
|
||||||
|
# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating
|
||||||
|
# the NX server. Default 2048
|
||||||
|
# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80
|
||||||
|
# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120
|
||||||
|
# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with
|
||||||
|
# nx_eventnotify(). Default: 4
|
||||||
|
CONFIG_EXAMPLES_NX_VPLANE=0
|
||||||
|
#CONFIG_EXAMPLES_NX_BGCOLOR
|
||||||
|
#CONFIG_EXAMPLES_NX_COLOR1
|
||||||
|
#CONFIG_EXAMPLES_NX_COLOR2
|
||||||
|
#CONFIG_EXAMPLES_NX_TBCOLOR
|
||||||
|
#CONFIG_EXAMPLES_NX_FONTCOLOR
|
||||||
|
CONFIG_EXAMPLES_NX_BPP=CONFIG_SIM_FBBPP
|
||||||
|
CONFIG_EXAMPLES_NX_RAWWINDOWS=n
|
||||||
|
CONFIG_EXAMPLES_NX_STACKSIZE=8192
|
||||||
|
CONFIG_EXAMPLES_NX_CLIENTPRIO=80
|
||||||
|
CONFIG_EXAMPLES_NX_SERVERPRIO=120
|
||||||
|
CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/mount
|
||||||
|
CONFIG_EXAMPLES_MOUNT_DEVNAME="/dev/ram0"
|
||||||
|
#CONFIG_EXAMPLES_MOUNT_NSECTORS=2048
|
||||||
|
#CONFIG_EXAMPLES_MOUNT_SECTORSIZE=512
|
||||||
|
#CONFIG_EXAMPLES_MOUNT_RAMDEVNO=1
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/touchscreen
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN - Build the touchscreen test as
|
||||||
|
# an NSH built-in function. Default: Built as a standalone problem
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN_MINOR - The minor device number. Minor=N
|
||||||
|
# correspnds to touchscreen device /dev/input0. Note this value must
|
||||||
|
# with CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH. Default 0.
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH - The path to the touchscreen
|
||||||
|
# device. This must be consistent with CONFIG_EXAMPLES_TOUCHSCREEN_MINOR.
|
||||||
|
# Default: "/dev/input0"
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_TOUCHSCREEN_BUILTIN=n
|
||||||
|
CONFIG_EXAMPLES_TOUCHSCREEN_MINOR=0
|
||||||
|
CONFIG_EXAMPLES_TOUCHSCREEN_DEVPATH="/dev/input0"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Additional examples/touchscreen needed only for the simulated target
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN_BGCOLOR -- Background color
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_TOUCHSCREEN_BGCOLOR=0x007b68ee
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||||
|
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||||
|
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||||
|
# but copy themselves entirely into RAM for better performance.
|
||||||
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||||
|
# all stack operations outside of the nuttx model.
|
||||||
|
# CONFIG_STACK_POINTER - The initial stack pointer
|
||||||
|
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||||
|
# This is the thread that (1) performs the inital boot of the system up
|
||||||
|
# to the point where user_start() is spawned, and (2) there after is the
|
||||||
|
# IDLE thread that executes only when there is no other thread ready to
|
||||||
|
# run.
|
||||||
|
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||||
|
# for the main user thread that begins at the user_start() entry point.
|
||||||
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||||
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||||
|
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||||
|
# CONFIG_HEAP_SIZE - The size of the heap
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=n
|
||||||
|
CONFIG_BOOT_COPYTORAM=n
|
||||||
|
CONFIG_CUSTOM_STACK=n
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=4096
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=4096
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=8192
|
||||||
|
CONFIG_HEAP_BASE=
|
||||||
|
CONFIG_HEAP_SIZE=
|
||||||
45
configs/sim/touchscreen/setenv.sh
Executable file
45
configs/sim/touchscreen/setenv.sh
Executable file
@ -0,0 +1,45 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# sim/touchscreen/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z ${PATH_ORIG} ]; then export PATH_ORIG=${PATH}; fi
|
||||||
|
|
||||||
|
#export NUTTX_BIN=
|
||||||
|
#export PATH=${NUTTX_BIN}:/sbin:/usr/sbin:${PATH_ORIG}
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
Loading…
Reference in New Issue
Block a user