boards/risc-v: Add support for PINE64 Star64 JH7110 SBC
This PR adds support for PINE64 Star64 64-bit RISC-V SBC, based on StarFive JH7110 SoC. Most of the code is derived from NuttX for QEMU RISC-V (Kernel Mode). [The source files are explained in the articles here](https://github.com/lupyuen/nuttx-star64) Modified Files: boards/Kconfig: Added Star64 board New Files in boards/risc-v/jh7110/star64: src/jh7110_appinit.c: Startup Code include/board.h: Star64 Definitions include/board_memorymap.h: Memory Map src/etc/init.d/rc.sysinit, rcS: Startup Script src/.gitignore: Ignore the tmp filesystem scripts/ld.script: Linker Script scripts/Make.defs: Star64 Makefile src/Makefile: Star64 Makefile Kconfig: Star64 Config configs/nsh/defconfig: NSH Build Config Updated Documentation: introduction/detailed_support.rst: Added StarFive JH7110 SoC and Star64 SBC platforms/risc-v/jh7110/index.rst: New page for StarFive JH7110 SoC platforms/risc-v/jh7110/boards/star64/index.rst: Building and booting NuttX for Star64
This commit is contained in:
parent
d0a2fa626a
commit
a59673b526
@ -3051,6 +3051,13 @@ Espressif ESP32-C6 Devkit board.
|
|||||||
Please, refer to the :doc:`ESP32-C6 </platforms/risc-v/esp32c6/index>` on NuttX for
|
Please, refer to the :doc:`ESP32-C6 </platforms/risc-v/esp32c6/index>` on NuttX for
|
||||||
further information.
|
further information.
|
||||||
|
|
||||||
|
StarFive JH7110
|
||||||
|
---------------
|
||||||
|
|
||||||
|
The basic port has been completed for the following StarFive JH7110 board:
|
||||||
|
|
||||||
|
- **PINE64 Star64**: Refer to :doc:`PINE64 Star64 </platforms/risc-v/jh7110/boards/star64/index>` for further information.
|
||||||
|
|
||||||
ESP32 (Dual Xtensa LX6)
|
ESP32 (Dual Xtensa LX6)
|
||||||
=======================
|
=======================
|
||||||
|
|
||||||
|
220
Documentation/platforms/risc-v/jh7110/boards/star64/index.rst
Normal file
220
Documentation/platforms/risc-v/jh7110/boards/star64/index.rst
Normal file
@ -0,0 +1,220 @@
|
|||||||
|
=============
|
||||||
|
PINE64 Star64
|
||||||
|
=============
|
||||||
|
|
||||||
|
`Star64 <https://wiki.pine64.org/wiki/STAR64>`_ is a 64-bit RISC-V based
|
||||||
|
Single Board Computer powered by StarFive JH7110 Quad-Core SiFive U74 64-Bit CPU,
|
||||||
|
Imagination Technology BX-4-32 GPU and supports up to 8GB 1866MHz LPDDR4 memory.
|
||||||
|
|
||||||
|
It provides an eMMC module socket, MicroSD Card slot, PCI-e, Pi-2 Bus, USB 3.0
|
||||||
|
and many other peripheral interfaces for makers to integrate with sensors
|
||||||
|
and other devices.
|
||||||
|
|
||||||
|
Features
|
||||||
|
========
|
||||||
|
|
||||||
|
- **System on Chip:** StarFive JH7110
|
||||||
|
- **CPU:** SiFive RISC-V U74 Application Cores (4 cores, RV64GCB) and SiFive RISC-V S7 Monitor Core (single core, RV64IMACB)
|
||||||
|
- **GPU:** Imagination Technology BXE-4-32
|
||||||
|
- **RAM:** LPDDR4 2GB / 4GB / 8GB
|
||||||
|
- **Video:** Digital Video Output up to 4K @ 30 Hz, 4K HDR @ 60 fps
|
||||||
|
- **Audio:** 3.5mm Audio Jack
|
||||||
|
- **Ethernet:** Single or Dual 10 / 100 / 1000Mbps
|
||||||
|
- **Wireless:** 2.4 GHz / 5 Ghz MIMO WiFi 802.11 b/g/n/ac with Bluetooth 5.2 (Realtek RTL8852BU)
|
||||||
|
- **Storage:** 128 Mbit (16 MByte) XSPI NOR flash Memory, Bootable microSD (SDHC and SDXC up to 256 GB), Bootable eMMC
|
||||||
|
- **USB:** 1 x USB 3.0 Dedicated Host Port, 3 x USB 2.0 Host Ports
|
||||||
|
- **Expansion Ports:** PCIe 2.0 x 1 lane, 2 x 20 pins "Pi2" GPIO Header
|
||||||
|
- **MIPI DSI Port:** 4-lane MIPI DSI port for LCD Panel
|
||||||
|
- **MIPI CSI Port:** 4-lane MIPI CSI port for Camera Module
|
||||||
|
|
||||||
|
Serial Console
|
||||||
|
==============
|
||||||
|
|
||||||
|
A **USB Serial Adapter** (like `CH340G Serial Adapter <https://pine64.com/product/serial-console-woodpecker-edition/>`_)
|
||||||
|
is required to run NuttX on Star64.
|
||||||
|
|
||||||
|
Connect the USB Serial Adapter to Star64's **GPIO Header** at:
|
||||||
|
|
||||||
|
========== ===========
|
||||||
|
USB Serial GPIO Header
|
||||||
|
========== ===========
|
||||||
|
GND Pin 6 (GND)
|
||||||
|
RX Pin 8 (UART0 TX)
|
||||||
|
TX Pin 10 (UART0 RX)
|
||||||
|
========== ===========
|
||||||
|
|
||||||
|
On the USB Serial Adapter, set the **Voltage Level** to 3V3.
|
||||||
|
|
||||||
|
Connect Star64 to our computer with the USB Serial Adapter.
|
||||||
|
On our computer, start a Serial Terminal and connect to the USB Serial Port
|
||||||
|
at **115.2 kbps**.
|
||||||
|
|
||||||
|
NuttX will appear in the Serial Console when it boots on Star64.
|
||||||
|
|
||||||
|
RISC-V Toolchain
|
||||||
|
================
|
||||||
|
|
||||||
|
Before building NuttX for Star64, download the **RISC-V Toolchain riscv64-unknown-elf**
|
||||||
|
from `SiFive RISC-V Tools <https://github.com/sifive/freedom-tools/releases/tag/v2020.12.0>`_.
|
||||||
|
|
||||||
|
Add the downloaded toolchain ``riscv64-unknown-elf-toolchain-.../bin``
|
||||||
|
to the ``PATH`` Environment Variable.
|
||||||
|
|
||||||
|
Check the RISC-V Toolchain:
|
||||||
|
|
||||||
|
.. code:: console
|
||||||
|
|
||||||
|
$ riscv64-unknown-elf-gcc -v
|
||||||
|
|
||||||
|
Building
|
||||||
|
========
|
||||||
|
|
||||||
|
To build NuttX for Star64, :doc:`install the prerequisites </quickstart/install>` and
|
||||||
|
:doc:`clone the git repositories </quickstart/install>` for ``nuttx`` and ``apps``.
|
||||||
|
|
||||||
|
Configure the NuttX project and build the project:
|
||||||
|
|
||||||
|
.. code:: console
|
||||||
|
|
||||||
|
$ cd nuttx
|
||||||
|
$ tools/configure.sh star64:nsh
|
||||||
|
$ make
|
||||||
|
$ riscv64-unknown-elf-objcopy -O binary nuttx nuttx.bin
|
||||||
|
|
||||||
|
This produces the NuttX Kernel ``nuttx.bin``. Next, build the NuttX Apps Filesystem:
|
||||||
|
|
||||||
|
.. code:: console
|
||||||
|
|
||||||
|
$ make export
|
||||||
|
$ pushd ../apps
|
||||||
|
$ tools/mkimport.sh -z -x ../nuttx/nuttx-export-*.tar.gz
|
||||||
|
$ make import
|
||||||
|
$ popd
|
||||||
|
$ genromfs -f initrd -d ../apps/bin -V "NuttXBootVol"
|
||||||
|
|
||||||
|
This generates the Initial RAM Disk ``initrd``.
|
||||||
|
|
||||||
|
Download the `Device Tree jh7110-visionfive-v2.dtb <https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v3.1.5/jh7110-visionfive-v2.dtb>`_
|
||||||
|
from `StarFive VisionFive2 Software Releases <https://github.com/starfive-tech/VisionFive2/releases>`_
|
||||||
|
into the ``nuttx`` folder.
|
||||||
|
|
||||||
|
Inside the ``nuttx`` folder, create a Text File named ``nuttx.its``
|
||||||
|
with the following content:
|
||||||
|
|
||||||
|
::
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
/ {
|
||||||
|
description = "NuttX FIT image";
|
||||||
|
#address-cells = <2>;
|
||||||
|
|
||||||
|
images {
|
||||||
|
vmlinux {
|
||||||
|
description = "vmlinux";
|
||||||
|
data = /incbin/("./nuttx.bin");
|
||||||
|
type = "kernel";
|
||||||
|
arch = "riscv";
|
||||||
|
os = "linux";
|
||||||
|
load = <0x0 0x40200000>;
|
||||||
|
entry = <0x0 0x40200000>;
|
||||||
|
compression = "none";
|
||||||
|
};
|
||||||
|
|
||||||
|
ramdisk {
|
||||||
|
description = "buildroot initramfs";
|
||||||
|
data = /incbin/("./initrd");
|
||||||
|
type = "ramdisk";
|
||||||
|
arch = "riscv";
|
||||||
|
os = "linux";
|
||||||
|
load = <0x0 0x46100000>;
|
||||||
|
compression = "none";
|
||||||
|
hash-1 {
|
||||||
|
algo = "sha256";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
fdt {
|
||||||
|
data = /incbin/("./jh7110-visionfive-v2.dtb");
|
||||||
|
type = "flat_dt";
|
||||||
|
arch = "riscv";
|
||||||
|
load = <0x0 0x46000000>;
|
||||||
|
compression = "none";
|
||||||
|
hash-1 {
|
||||||
|
algo = "sha256";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
configurations {
|
||||||
|
default = "nuttx";
|
||||||
|
|
||||||
|
nuttx {
|
||||||
|
description = "NuttX";
|
||||||
|
kernel = "vmlinux";
|
||||||
|
fdt = "fdt";
|
||||||
|
loadables = "ramdisk";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
Package the NuttX Kernel, Initial RAM Disk and Device Tree into a
|
||||||
|
Flat Image Tree:
|
||||||
|
|
||||||
|
.. code:: console
|
||||||
|
|
||||||
|
$ sudo apt install u-boot-tools
|
||||||
|
$ mkimage -f nuttx.its -A riscv -O linux -T flat_dt starfiveu.fit
|
||||||
|
|
||||||
|
The Flat Image Tree ``starfiveu.fit`` will be copied to a microSD Card
|
||||||
|
in the next step.
|
||||||
|
|
||||||
|
Booting
|
||||||
|
=======
|
||||||
|
|
||||||
|
NuttX boots on Star64 via a microSD Card. To prepare the microSD Card, download the
|
||||||
|
`microSD Image sdcard.img <https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v3.1.5/sdcard.img>`_
|
||||||
|
from `StarFive VisionFive2 Software Releases <https://github.com/starfive-tech/VisionFive2/releases>`_.
|
||||||
|
|
||||||
|
Write the downloaded image to a microSD Card with
|
||||||
|
`Balena Etcher <https://www.balena.io/etcher/>`_ or
|
||||||
|
`GNOME Disks <https://wiki.gnome.org/Apps/Disks>`_.
|
||||||
|
|
||||||
|
Copy the file ``starfiveu.fit`` from the previous section
|
||||||
|
and overwrite the file on the microSD Card.
|
||||||
|
|
||||||
|
Check that Star64 is connected to our computer via a USB Serial Adapter.
|
||||||
|
|
||||||
|
Insert the microSD Card into Star64 and power up Star64.
|
||||||
|
NuttX boots on Star64 and NuttShell (nsh) appears in the Serial Console.
|
||||||
|
|
||||||
|
To see the available commands in NuttShell:
|
||||||
|
|
||||||
|
.. code:: console
|
||||||
|
|
||||||
|
$ help
|
||||||
|
|
||||||
|
`Booting NuttX over TFTP <https://lupyuen.github.io/articles/tftp>`_
|
||||||
|
is also supported on Star64.
|
||||||
|
|
||||||
|
Configurations
|
||||||
|
==============
|
||||||
|
|
||||||
|
nsh
|
||||||
|
---
|
||||||
|
|
||||||
|
Basic configuration that runs NuttShell (nsh).
|
||||||
|
This configuration is focused on low level, command-line driver testing.
|
||||||
|
Built-in applications are supported, but none are enabled.
|
||||||
|
Serial Console is enabled on UART0 at 115.2 kbps.
|
||||||
|
|
||||||
|
Peripheral Support
|
||||||
|
==================
|
||||||
|
|
||||||
|
NuttX for PinePhone supports these peripherals:
|
||||||
|
|
||||||
|
======================== ======= =====
|
||||||
|
Peripheral Support NOTES
|
||||||
|
======================== ======= =====
|
||||||
|
UART Yes
|
||||||
|
======================== ======= =====
|
29
Documentation/platforms/risc-v/jh7110/index.rst
Normal file
29
Documentation/platforms/risc-v/jh7110/index.rst
Normal file
@ -0,0 +1,29 @@
|
|||||||
|
===============
|
||||||
|
StarFive JH7110
|
||||||
|
===============
|
||||||
|
|
||||||
|
`StarFive JH7110 <https://doc-en.rvspace.org/Doc_Center/jh7110.html>`_ is a 64-bit RISC-V SoC that features:
|
||||||
|
|
||||||
|
- **CPU:** SiFive RISC-V U74 Application Cores (4 cores, RV64GCB) and SiFive RISC-V S7 Monitor Core (single core, RV64IMACB)
|
||||||
|
- **GPU:** Imagination Technology BXE-4-32
|
||||||
|
- **RAM:** 32-bit LPDDR4 / DDR4 / LPDDR3 / DDR3
|
||||||
|
- **Video Decoder:** 4K @ 30 fps multi-stream for H.264/H.265
|
||||||
|
- **Video Encoder:** 1080p @ 30 fps multi-stream for H.265
|
||||||
|
- **Video Input:** 1 x DVP and 1 x MIPI-CSI with 4D1C
|
||||||
|
- **Video Output:** MIPI DSI with 4D1C
|
||||||
|
- **HDMI:** 1 x HDMI 2.0 port display up to 4K @ 30 fps
|
||||||
|
- **Parallel Interface:**: 24-bit RGB parallel interface
|
||||||
|
- **PCIe:** 2 x PCIe 2.0, 1 lane
|
||||||
|
- **USB:** USB 3.0 Host / Device
|
||||||
|
- **Ethernet:** 2 x Ethernet MAC 1,000 Mbps, 2 x CAN 2.0B
|
||||||
|
- **Security:** TRNG, OTP
|
||||||
|
- **Peripherals:** UART, I2C, SPI, SDIO, DPI, PCM / I2S, Timers, Temperature Sensor, INTC, PWM, WDT, GPIO, DVP, GPCLK
|
||||||
|
|
||||||
|
Supported Boards
|
||||||
|
================
|
||||||
|
|
||||||
|
.. toctree::
|
||||||
|
:glob:
|
||||||
|
:maxdepth: 1
|
||||||
|
|
||||||
|
boards/*/*
|
@ -1810,6 +1810,13 @@ config ARCH_BOARD_QEMU_RV_VIRT
|
|||||||
This is the board configuration for the port of NuttX to the
|
This is the board configuration for the port of NuttX to the
|
||||||
QEMU RV32 Virt board. This board features the QEMU RV32 CPU.
|
QEMU RV32 Virt board. This board features the QEMU RV32 CPU.
|
||||||
|
|
||||||
|
config ARCH_BOARD_JH7110_STAR64
|
||||||
|
bool "PINE64 Star64"
|
||||||
|
depends on ARCH_CHIP_JH7110
|
||||||
|
---help---
|
||||||
|
This options selects support for NuttX on PINE64 Star64 based
|
||||||
|
on StarFive JH7110 SoC.
|
||||||
|
|
||||||
config ARCH_BOARD_S32K118EVB
|
config ARCH_BOARD_S32K118EVB
|
||||||
bool "NXP S32K118EVB"
|
bool "NXP S32K118EVB"
|
||||||
depends on ARCH_CHIP_S32K118
|
depends on ARCH_CHIP_S32K118
|
||||||
@ -3057,6 +3064,7 @@ config ARCH_BOARD
|
|||||||
default "mr-canhubk3" if ARCH_BOARD_MR_CANHUBK3
|
default "mr-canhubk3" if ARCH_BOARD_MR_CANHUBK3
|
||||||
default "rv32m1-vega" if ARCH_BOARD_RV32M1_VEGA
|
default "rv32m1-vega" if ARCH_BOARD_RV32M1_VEGA
|
||||||
default "rv-virt" if ARCH_BOARD_QEMU_RV_VIRT
|
default "rv-virt" if ARCH_BOARD_QEMU_RV_VIRT
|
||||||
|
default "star64" if ARCH_BOARD_JH7110_STAR64
|
||||||
default "sabre-6quad" if ARCH_BOARD_SABRE_6QUAD
|
default "sabre-6quad" if ARCH_BOARD_SABRE_6QUAD
|
||||||
default "qemu-armv8a" if ARCH_BOARD_QEMU_ARMV8A
|
default "qemu-armv8a" if ARCH_BOARD_QEMU_ARMV8A
|
||||||
default "pinephone" if ARCH_BOARD_PINEPHONE
|
default "pinephone" if ARCH_BOARD_PINEPHONE
|
||||||
@ -3900,6 +3908,9 @@ endif
|
|||||||
if ARCH_BOARD_QEMU_RV_VIRT
|
if ARCH_BOARD_QEMU_RV_VIRT
|
||||||
source "boards/risc-v/qemu-rv/rv-virt/Kconfig"
|
source "boards/risc-v/qemu-rv/rv-virt/Kconfig"
|
||||||
endif
|
endif
|
||||||
|
if ARCH_BOARD_JH7110_STAR64
|
||||||
|
source "boards/risc-v/jh7110/star64/Kconfig"
|
||||||
|
endif
|
||||||
if ARCH_BOARD_ESP32C3_DEVKIT
|
if ARCH_BOARD_ESP32C3_DEVKIT
|
||||||
source "boards/risc-v/esp32c3/esp32c3-devkit/Kconfig"
|
source "boards/risc-v/esp32c3/esp32c3-devkit/Kconfig"
|
||||||
endif
|
endif
|
||||||
|
0
boards/risc-v/jh7110/star64/Kconfig
Normal file
0
boards/risc-v/jh7110/star64/Kconfig
Normal file
93
boards/risc-v/jh7110/star64/configs/nsh/defconfig
Normal file
93
boards/risc-v/jh7110/star64/configs/nsh/defconfig
Normal file
@ -0,0 +1,93 @@
|
|||||||
|
#
|
||||||
|
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
||||||
|
#
|
||||||
|
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
||||||
|
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
||||||
|
# modifications.
|
||||||
|
#
|
||||||
|
# CONFIG_DISABLE_OS_API is not set
|
||||||
|
# CONFIG_NSH_DISABLE_LOSMART is not set
|
||||||
|
CONFIG_16550_ADDRWIDTH=0
|
||||||
|
CONFIG_16550_REGINCR=4
|
||||||
|
CONFIG_16550_UART0=y
|
||||||
|
CONFIG_16550_UART0_BASE=0x10000000
|
||||||
|
CONFIG_16550_UART0_CLOCK=23040000
|
||||||
|
CONFIG_16550_UART0_IRQ=57
|
||||||
|
CONFIG_16550_UART0_SERIAL_CONSOLE=y
|
||||||
|
CONFIG_16550_UART=y
|
||||||
|
CONFIG_16550_WAIT_LCR=y
|
||||||
|
CONFIG_ARCH="risc-v"
|
||||||
|
CONFIG_ARCH_ADDRENV=y
|
||||||
|
CONFIG_ARCH_BOARD="star64"
|
||||||
|
CONFIG_ARCH_BOARD_JH7110_STAR64=y
|
||||||
|
CONFIG_ARCH_CHIP="jh7110"
|
||||||
|
CONFIG_ARCH_CHIP_JH7110=y
|
||||||
|
CONFIG_ARCH_DATA_NPAGES=128
|
||||||
|
CONFIG_ARCH_DATA_VBASE=0xC0100000
|
||||||
|
CONFIG_ARCH_HEAP_NPAGES=128
|
||||||
|
CONFIG_ARCH_HEAP_VBASE=0xC0200000
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=2048
|
||||||
|
CONFIG_ARCH_KERNEL_STACKSIZE=3072
|
||||||
|
CONFIG_ARCH_PGPOOL_MAPPING=y
|
||||||
|
CONFIG_ARCH_PGPOOL_PBASE=0x40600000
|
||||||
|
CONFIG_ARCH_PGPOOL_SIZE=4194304
|
||||||
|
CONFIG_ARCH_PGPOOL_VBASE=0x40600000
|
||||||
|
CONFIG_ARCH_RISCV=y
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_ARCH_TEXT_NPAGES=128
|
||||||
|
CONFIG_ARCH_TEXT_VBASE=0xC0000000
|
||||||
|
CONFIG_ARCH_USE_MMU=y
|
||||||
|
CONFIG_ARCH_USE_MPU=y
|
||||||
|
CONFIG_ARCH_USE_S_MODE=y
|
||||||
|
CONFIG_BOARDCTL_ROMDISK=y
|
||||||
|
CONFIG_BOARD_LATE_INITIALIZE=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=116524
|
||||||
|
CONFIG_BUILD_KERNEL=y
|
||||||
|
CONFIG_DEBUG_ASSERTIONS=y
|
||||||
|
CONFIG_DEBUG_ASSERTIONS_EXPRESSION=y
|
||||||
|
CONFIG_DEBUG_ERROR=y
|
||||||
|
CONFIG_DEBUG_FEATURES=y
|
||||||
|
CONFIG_DEBUG_FULLOPT=y
|
||||||
|
CONFIG_DEBUG_INFO=y
|
||||||
|
CONFIG_DEBUG_SYMBOLS=y
|
||||||
|
CONFIG_DEBUG_WARN=y
|
||||||
|
CONFIG_DEV_ZERO=y
|
||||||
|
CONFIG_ELF=y
|
||||||
|
CONFIG_EXAMPLES_HELLO=m
|
||||||
|
CONFIG_FS_PROCFS=y
|
||||||
|
CONFIG_FS_ROMFS=y
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=3072
|
||||||
|
CONFIG_INIT_FILEPATH="/system/bin/init"
|
||||||
|
CONFIG_INIT_MOUNT=y
|
||||||
|
CONFIG_INIT_MOUNT_FLAGS=0x1
|
||||||
|
CONFIG_INIT_MOUNT_TARGET="/system/bin"
|
||||||
|
CONFIG_INIT_STACKSIZE=3072
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_LIBC_ENVPATH=y
|
||||||
|
CONFIG_LIBC_EXECFUNCS=y
|
||||||
|
CONFIG_LIBC_PERROR_STDOUT=y
|
||||||
|
CONFIG_LIBC_STRERROR=y
|
||||||
|
CONFIG_MEMSET_64BIT=y
|
||||||
|
CONFIG_MEMSET_OPTSPEED=y
|
||||||
|
CONFIG_MM_PGALLOC=y
|
||||||
|
CONFIG_NFILE_DESCRIPTORS_PER_BLOCK=6
|
||||||
|
CONFIG_NSH_ARCHINIT=y
|
||||||
|
CONFIG_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_NSH_FILE_APPS=y
|
||||||
|
CONFIG_NSH_READLINE=y
|
||||||
|
CONFIG_PATH_INITIAL="/system/bin"
|
||||||
|
CONFIG_RAM_SIZE=1048576
|
||||||
|
CONFIG_RAM_START=0x40200000
|
||||||
|
CONFIG_READLINE_CMD_HISTORY=y
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_LPWORK=y
|
||||||
|
CONFIG_SCHED_WAITPID=y
|
||||||
|
CONFIG_SERIAL_UART_ARCH_MMIO=y
|
||||||
|
CONFIG_STACK_COLORATION=y
|
||||||
|
CONFIG_START_MONTH=12
|
||||||
|
CONFIG_START_YEAR=2021
|
||||||
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||||
|
CONFIG_SYSTEM_NSH=y
|
||||||
|
CONFIG_SYSTEM_NSH_PROGNAME="init"
|
||||||
|
CONFIG_TESTING_GETPRIME=y
|
||||||
|
CONFIG_USEC_PER_TICK=1000
|
78
boards/risc-v/jh7110/star64/include/board.h
Normal file
78
boards/risc-v/jh7110/star64/include/board.h
Normal file
@ -0,0 +1,78 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/risc-v/jh7110/star64/include/board.h
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __BOARDS_RISCV_JH7110_STAR64_INCLUDE_BOARD_H
|
||||||
|
#define __BOARDS_RISCV_JH7110_STAR64_INCLUDE_BOARD_H
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#define LED_STARTED 0 /* N/A */
|
||||||
|
#define LED_HEAPALLOCATE 1 /* N/A */
|
||||||
|
#define LED_IRQSENABLED 2 /* N/A */
|
||||||
|
#define LED_STACKCREATED 3 /* N/A */
|
||||||
|
#define LED_INIRQ 4 /* N/A */
|
||||||
|
#define LED_SIGNAL 5 /* N/A */
|
||||||
|
#define LED_ASSERTION 6 /* N/A */
|
||||||
|
#define LED_PANIC 7 /* N/A */
|
||||||
|
#define LED_CPU 8 /* LED */
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Types
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
#define EXTERN extern "C"
|
||||||
|
extern "C"
|
||||||
|
{
|
||||||
|
#else
|
||||||
|
#define EXTERN extern
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Function Prototypes
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: jh7110_boardinitialize
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void jh7110_boardinitialize(void);
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#endif /* __ASSEMBLY__ */
|
||||||
|
#endif /* __BOARDS_RISCV_JH7110_STAR64_INCLUDE_BOARD_H */
|
88
boards/risc-v/jh7110/star64/include/board_memorymap.h
Normal file
88
boards/risc-v/jh7110/star64/include/board_memorymap.h
Normal file
@ -0,0 +1,88 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/risc-v/jh7110/star64/include/board_memorymap.h
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __BOARDS_RISCV_JH7110_STAR64_INCLUDE_BOARD_MEMORYMAP_H
|
||||||
|
#define __BOARDS_RISCV_JH7110_STAR64_INCLUDE_BOARD_MEMORYMAP_H
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* DDR start address */
|
||||||
|
|
||||||
|
#define JH7110_DDR_BASE (0x40200000)
|
||||||
|
#define JH7110_DDR_SIZE (0x40000000)
|
||||||
|
|
||||||
|
/* Kernel code memory (RX) */
|
||||||
|
|
||||||
|
#define KFLASH_START (uintptr_t)__kflash_start
|
||||||
|
#define KFLASH_SIZE (uintptr_t)__kflash_size
|
||||||
|
#define KSRAM_START (uintptr_t)__ksram_start
|
||||||
|
#define KSRAM_SIZE (uintptr_t)__ksram_size
|
||||||
|
#define KSRAM_END (uintptr_t)__ksram_end
|
||||||
|
|
||||||
|
/* Kernel RAM (RW) */
|
||||||
|
|
||||||
|
#define PGPOOL_START (uintptr_t)__pgheap_start
|
||||||
|
#define PGPOOL_SIZE (uintptr_t)__pgheap_size
|
||||||
|
|
||||||
|
/* Page pool (RWX) */
|
||||||
|
|
||||||
|
#define PGPOOL_START (uintptr_t)__pgheap_start
|
||||||
|
#define PGPOOL_SIZE (uintptr_t)__pgheap_size
|
||||||
|
#define PGPOOL_END (PGPOOL_START + PGPOOL_SIZE)
|
||||||
|
|
||||||
|
/* Ramdisk (RW) */
|
||||||
|
|
||||||
|
#define RAMDISK_START (uintptr_t)__ramdisk_start
|
||||||
|
#define RAMDISK_SIZE (uintptr_t)__ramdisk_size
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Kernel code memory (RX) */
|
||||||
|
|
||||||
|
extern uint8_t __kflash_start[];
|
||||||
|
extern uint8_t __kflash_size[];
|
||||||
|
|
||||||
|
/* Kernel RAM (RW) */
|
||||||
|
|
||||||
|
extern uint8_t __ksram_start[];
|
||||||
|
extern uint8_t __ksram_size[];
|
||||||
|
extern uint8_t __ksram_end[];
|
||||||
|
|
||||||
|
/* Page pool (RWX) */
|
||||||
|
|
||||||
|
extern uint8_t __pgheap_start[];
|
||||||
|
extern uint8_t __pgheap_size[];
|
||||||
|
|
||||||
|
/* Ramdisk (RW) */
|
||||||
|
|
||||||
|
extern uint8_t __ramdisk_start[];
|
||||||
|
extern uint8_t __ramdisk_size[];
|
||||||
|
|
||||||
|
#endif /* __BOARDS_RISCV_JH7110_STAR64_INCLUDE_BOARD_MEMORYMAP_H */
|
45
boards/risc-v/jh7110/star64/scripts/Make.defs
Normal file
45
boards/risc-v/jh7110/star64/scripts/Make.defs
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
############################################################################
|
||||||
|
# boards/risc-v/jh7110/star64/scripts/Make.defs
|
||||||
|
#
|
||||||
|
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
# contributor license agreements. See the NOTICE file distributed with
|
||||||
|
# this work for additional information regarding copyright ownership. The
|
||||||
|
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
# "License"); you may not use this file except in compliance with the
|
||||||
|
# License. You may obtain a copy of the License at
|
||||||
|
#
|
||||||
|
# http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#
|
||||||
|
# Unless required by applicable law or agreed to in writing, software
|
||||||
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
# License for the specific language governing permissions and limitations
|
||||||
|
# under the License.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include $(TOPDIR)/.config
|
||||||
|
include $(TOPDIR)/tools/Config.mk
|
||||||
|
include $(TOPDIR)/arch/risc-v/src/common/Toolchain.defs
|
||||||
|
|
||||||
|
LDSCRIPT = ld.script
|
||||||
|
ARCHSCRIPT += $(BOARD_DIR)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||||
|
|
||||||
|
ARCHCPUFLAGS += -mcmodel=medany
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base
|
||||||
|
|
||||||
|
CFLAGS := $(ARCHCFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS := $(ARCHCXXFLAGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS := $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRAFLAGS)
|
||||||
|
AFLAGS += $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
# ELF module definitions
|
||||||
|
|
||||||
|
CELFFLAGS = $(CFLAGS)
|
||||||
|
CXXELFFLAGS = $(CXXFLAGS)
|
||||||
|
|
||||||
|
LDELFFLAGS = --oformat elf64-littleriscv
|
||||||
|
LDELFFLAGS += -r -e main
|
||||||
|
LDELFFLAGS += -T $(call CONVERT_PATH,$(TOPDIR)/binfmt/libelf/gnu-elf.ld)
|
150
boards/risc-v/jh7110/star64/scripts/ld.script
Normal file
150
boards/risc-v/jh7110/star64/scripts/ld.script
Normal file
@ -0,0 +1,150 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/risc-v/jh7110/star64/scripts/ld.script
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
kflash (rx) : ORIGIN = 0x40200000, LENGTH = 2048K /* w/ cache */
|
||||||
|
ksram (rwx) : ORIGIN = 0x40400000, LENGTH = 2048K /* w/ cache */
|
||||||
|
pgram (rwx) : ORIGIN = 0x40600000, LENGTH = 4096K /* w/ cache */
|
||||||
|
ramdisk (rwx) : ORIGIN = 0x40A00000, LENGTH = 16M /* w/ cache */
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH("riscv")
|
||||||
|
|
||||||
|
/* Provide the kernel boundaries */
|
||||||
|
|
||||||
|
__kflash_start = ORIGIN(kflash);
|
||||||
|
__kflash_size = LENGTH(kflash);
|
||||||
|
__ksram_start = ORIGIN(ksram);
|
||||||
|
__ksram_size = LENGTH(ksram);
|
||||||
|
__ksram_end = ORIGIN(ksram) + LENGTH(ksram);
|
||||||
|
|
||||||
|
/* Page heap */
|
||||||
|
|
||||||
|
__pgheap_start = ORIGIN(pgram);
|
||||||
|
__pgheap_size = LENGTH(pgram) + LENGTH(ramdisk);
|
||||||
|
|
||||||
|
/* Application ramdisk */
|
||||||
|
|
||||||
|
__ramdisk_start = ORIGIN(ramdisk);
|
||||||
|
__ramdisk_size = LENGTH(ramdisk);
|
||||||
|
__ramdisk_end = ORIGIN(ramdisk) + LENGTH(ramdisk);
|
||||||
|
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
. = 0x40200000;
|
||||||
|
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
_stext = . ;
|
||||||
|
*(.text)
|
||||||
|
*(.text.*)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.stub)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.jcr)
|
||||||
|
|
||||||
|
/* C++ support: The .init and .fini sections contain specific logic
|
||||||
|
* to manage static constructors and destructors.
|
||||||
|
*/
|
||||||
|
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.init) /* Old ABI */
|
||||||
|
*(.fini) /* Old ABI */
|
||||||
|
_etext = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
_srodata = . ;
|
||||||
|
*(.rodata)
|
||||||
|
*(.rodata1)
|
||||||
|
*(.rodata.*)
|
||||||
|
*(.gnu.linkonce.r*)
|
||||||
|
_erodata = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
.tdata : {
|
||||||
|
_stdata = ABSOLUTE(.);
|
||||||
|
*(.tdata .tdata.* .gnu.linkonce.td.*);
|
||||||
|
_etdata = ABSOLUTE(.);
|
||||||
|
}
|
||||||
|
|
||||||
|
.tbss : {
|
||||||
|
_stbss = ABSOLUTE(.);
|
||||||
|
*(.tbss .tbss.* .gnu.linkonce.tb.* .tcommon);
|
||||||
|
_etbss = ABSOLUTE(.);
|
||||||
|
}
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.);
|
||||||
|
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
_sdata = . ;
|
||||||
|
*(.data)
|
||||||
|
*(.data1)
|
||||||
|
*(.data.*)
|
||||||
|
*(.gnu.linkonce.d*)
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = . ;
|
||||||
|
}
|
||||||
|
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
_sbss = . ;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss.*)
|
||||||
|
*(.sbss)
|
||||||
|
*(.sbss.*)
|
||||||
|
*(.gnu.linkonce.b*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = . ;
|
||||||
|
} > ksram
|
||||||
|
|
||||||
|
/* Page tables here, align to 4K boundary */
|
||||||
|
|
||||||
|
.pgtables (NOLOAD) : ALIGN(0x1000) {
|
||||||
|
*(.pgtables)
|
||||||
|
. = ALIGN(4);
|
||||||
|
} > ksram
|
||||||
|
|
||||||
|
/* Stack top */
|
||||||
|
|
||||||
|
.stack_top : {
|
||||||
|
. = ALIGN(32);
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > ksram
|
||||||
|
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
2
boards/risc-v/jh7110/star64/src/.gitignore
vendored
Normal file
2
boards/risc-v/jh7110/star64/src/.gitignore
vendored
Normal file
@ -0,0 +1,2 @@
|
|||||||
|
etctmp
|
||||||
|
etctmp.c
|
27
boards/risc-v/jh7110/star64/src/Makefile
Normal file
27
boards/risc-v/jh7110/star64/src/Makefile
Normal file
@ -0,0 +1,27 @@
|
|||||||
|
############################################################################
|
||||||
|
# boards/risc-v/jh7110/star64/src/Makefile
|
||||||
|
#
|
||||||
|
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
# contributor license agreements. See the NOTICE file distributed with
|
||||||
|
# this work for additional information regarding copyright ownership. The
|
||||||
|
# ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
# "License"); you may not use this file except in compliance with the
|
||||||
|
# License. You may obtain a copy of the License at
|
||||||
|
#
|
||||||
|
# http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
#
|
||||||
|
# Unless required by applicable law or agreed to in writing, software
|
||||||
|
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
# License for the specific language governing permissions and limitations
|
||||||
|
# under the License.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include $(TOPDIR)/Make.defs
|
||||||
|
|
||||||
|
RCSRCS = etc/init.d/rc.sysinit etc/init.d/rcS
|
||||||
|
|
||||||
|
CSRCS = jh7110_appinit.c
|
||||||
|
|
||||||
|
include $(TOPDIR)/boards/Board.mk
|
19
boards/risc-v/jh7110/star64/src/etc/init.d/rc.sysinit
Normal file
19
boards/risc-v/jh7110/star64/src/etc/init.d/rc.sysinit
Normal file
@ -0,0 +1,19 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/risc-v/jh7110/star64/src/etc/init.d/rc.sysinit
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
19
boards/risc-v/jh7110/star64/src/etc/init.d/rcS
Normal file
19
boards/risc-v/jh7110/star64/src/etc/init.d/rcS
Normal file
@ -0,0 +1,19 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/risc-v/jh7110/star64/src/etc/init.d/rcS
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
167
boards/risc-v/jh7110/star64/src/jh7110_appinit.c
Normal file
167
boards/risc-v/jh7110/star64/src/jh7110_appinit.c
Normal file
@ -0,0 +1,167 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/risc-v/jh7110/star64/src/jh7110_appinit.c
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <syslog.h>
|
||||||
|
#include <errno.h>
|
||||||
|
|
||||||
|
#include <nuttx/board.h>
|
||||||
|
#include <nuttx/drivers/ramdisk.h>
|
||||||
|
#include <sys/mount.h>
|
||||||
|
#include <sys/boardctl.h>
|
||||||
|
#include <arch/board/board_memorymap.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Ramdisk Definition */
|
||||||
|
|
||||||
|
#define SECTORSIZE 512
|
||||||
|
#define NSECTORS(b) (((b) + SECTORSIZE - 1) / SECTORSIZE)
|
||||||
|
#define RAMDISK_DEVICE_MINOR 0
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: mount_ramdisk
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Mount a ramdisk defined in the ld.script to /dev/ramX. The ramdisk is
|
||||||
|
* intended to contain a romfs with applications which can be spawned at
|
||||||
|
* runtime.
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* OK is returned on success.
|
||||||
|
* -ERRORNO is returned on failure.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int mount_ramdisk(void)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
struct boardioc_romdisk_s desc;
|
||||||
|
|
||||||
|
desc.minor = RAMDISK_DEVICE_MINOR;
|
||||||
|
desc.nsectors = NSECTORS((ssize_t)__ramdisk_size);
|
||||||
|
desc.sectsize = SECTORSIZE;
|
||||||
|
desc.image = __ramdisk_start;
|
||||||
|
|
||||||
|
ret = boardctl(BOARDIOC_ROMDISK, (uintptr_t)&desc);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
syslog(LOG_ERR, "Ramdisk register failed: %s\n", strerror(errno));
|
||||||
|
syslog(LOG_ERR, "Ramdisk mountpoint /dev/ram%d\n",
|
||||||
|
RAMDISK_DEVICE_MINOR);
|
||||||
|
syslog(LOG_ERR, "Ramdisk length %lu, origin %lx\n",
|
||||||
|
(ssize_t)__ramdisk_size, (uintptr_t)__ramdisk_start);
|
||||||
|
}
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_app_initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform architecture specific initialization
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* arg - The boardctl() argument is passed to the board_app_initialize()
|
||||||
|
* implementation without modification. The argument has no
|
||||||
|
* meaning to NuttX; the meaning of the argument is a contract
|
||||||
|
* between the board-specific initialization logic and the
|
||||||
|
* matching application logic. The value could be such things as a
|
||||||
|
* mode enumeration value, a set of DIP switch switch settings, a
|
||||||
|
* pointer to configuration data read from a file or serial FLASH,
|
||||||
|
* or whatever you would like to do with it. Every implementation
|
||||||
|
* should accept zero/NULL as a default configuration.
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* Zero (OK) is returned on success; a negated errno value is returned on
|
||||||
|
* any failure to indicate the nature of the failure.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int board_app_initialize(uintptr_t arg)
|
||||||
|
{
|
||||||
|
#ifdef CONFIG_BOARD_LATE_INITIALIZE
|
||||||
|
/* Board initialization already performed by board_late_initialize() */
|
||||||
|
|
||||||
|
return OK;
|
||||||
|
#else
|
||||||
|
/* Perform board-specific initialization */
|
||||||
|
|
||||||
|
#ifdef CONFIG_NSH_ARCHINIT
|
||||||
|
|
||||||
|
mount(NULL, "/proc", "procfs", 0, NULL);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return OK;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: board_late_initialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* If CONFIG_BOARD_LATE_INITIALIZE is selected, then an additional
|
||||||
|
* initialization call will be performed in the boot-up sequence to a
|
||||||
|
* function called board_late_initialize(). board_late_initialize() will
|
||||||
|
* be called after up_initialize() and board_early_initialize() and just
|
||||||
|
* before the initial application is started. This additional
|
||||||
|
* initialization phase may be used, for example, to initialize board-
|
||||||
|
* specific device drivers for which board_early_initialize() is not
|
||||||
|
* suitable.
|
||||||
|
*
|
||||||
|
* Waiting for events, use of I2C, SPI, etc are permissible in the context
|
||||||
|
* of board_late_initialize(). That is because board_late_initialize()
|
||||||
|
* will run on a temporary, internal kernel thread.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void board_late_initialize(void)
|
||||||
|
{
|
||||||
|
/* Mount the RAM Disk */
|
||||||
|
|
||||||
|
mount_ramdisk();
|
||||||
|
|
||||||
|
/* Perform board-specific initialization */
|
||||||
|
|
||||||
|
#ifdef CONFIG_NSH_ARCHINIT
|
||||||
|
|
||||||
|
mount(NULL, "/proc", "procfs", 0, NULL);
|
||||||
|
|
||||||
|
#endif
|
||||||
|
}
|
Loading…
Reference in New Issue
Block a user