diff --git a/Documentation/README.html b/Documentation/README.html
index a4be2082dc..a9c274414b 100644
--- a/Documentation/README.html
+++ b/Documentation/README.html
@@ -8,7 +8,7 @@
NuttX README Files
- Last Updated: November 18, 2018
+ Last Updated: December 3, 2018
|
@@ -125,6 +125,8 @@ nuttx/
| | `- README.txt
| |- kwikstik-k40/
| | `- README.txt
+ | |- launchxl-cc1312r1/
+ | | `- README.txt
| |- launchxl-tms57004/
| | `- README.txt
| |- lincoln60/
diff --git a/README.txt b/README.txt
index 18f9b951b8..d4c496bfa0 100644
--- a/README.txt
+++ b/README.txt
@@ -1799,6 +1799,8 @@ nuttx/
| | `- README.txt
| |- kwikstik-k40/
| | `- README.txt
+ | |- launchxl-cc1312r1/
+ | | `- README.txt
| |- launchxl-tms57004/
| | `- README.txt
| |- lincoln60/
diff --git a/arch/arm/src/tiva/Kconfig b/arch/arm/src/tiva/Kconfig
index a63e37e946..a17e815754 100644
--- a/arch/arm/src/tiva/Kconfig
+++ b/arch/arm/src/tiva/Kconfig
@@ -119,8 +119,8 @@ config ARCH_CHIP_CC1312R1
depends on ARCH_CHIP_SIMPLELINK || EXPERIMENTAL
select ARCH_CHIP_CC13X2
-config ARCH_CHIP_CC1312R1
- bool "CC1312R1 SimpleLink"
+config ARCH_CHIP_CC1352R1
+ bool "CC1352R1 SimpleLink"
depends on ARCH_CHIP_SIMPLELINK || EXPERIMENTAL
select ARCH_CHIP_CC13X2
@@ -271,6 +271,8 @@ config TIVA_BOARD_EARLYINIT
menu "Tiva/Stellaris Peripheral Support"
+# MCU capabilities
+
config TIVA_ADC
bool
default n
@@ -375,14 +377,6 @@ config TIVA_HAVE_ETHERNET
bool
default n
-config TIVA_SSI
- bool
- default n
-
-config TIVA_TIMER
- bool
- default n
-
config TIVA_HAVE_TIMER0
bool
default n
@@ -415,6 +409,18 @@ config TIVA_HAVE_TIMER7
bool
default n
+# Driver selections
+
+config TIVA_SSI
+ bool
+ default n
+
+config TIVA_TIMER
+ bool
+ default n
+
+# Periperhal Selections
+
config TIVA_ADC0
bool "ADC0"
default n
diff --git a/configs/Kconfig b/configs/Kconfig
index a2a0e253f5..a5be866892 100644
--- a/configs/Kconfig
+++ b/configs/Kconfig
@@ -335,6 +335,16 @@ config ARCH_BOARD_KWIKSTIK_K40
Kinetis K40 Cortex-M4 MCU. This port uses the NXP/FreeScale KwikStik-K40
development board.
+config ARCH_BOARD_LAUNCHXL_CC1312R1
+ bool "TI LaunchXL-CC1312R1"
+ depends on ARCH_CHIP_CC1312R1
+ select ARCH_HAVE_LEDS
+ select ARCH_HAVE_BUTTONS
+ select ARCH_HAVE_IRQBUTTONS
+ ---help---
+ TI SimpleLink CC1312R1 LaunchPad Evaluation Kit (LAUNCHXL-CC1312R1)
+ featuring the SimpleLinkCC1312R1 chip.
+
config ARCH_BOARD_LAUNCHXL_TMS57004
bool "TI LaunchXL-TMS57004"
depends on ARCH_CHIP_TMS570LS0432PZ
@@ -1768,6 +1778,7 @@ config ARCH_BOARD
default "imxrt1050-evk" if ARCH_BOARD_IMXRT1050_EVK
default "imxrt1060-evk" if ARCH_BOARD_IMXRT1060_EVK
default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40
+ default "launchxl-cc1312r1" if ARCH_BOARD_LAUNCHXL_CC1312R1
default "launchxl-tms57004" if ARCH_BOARD_LAUNCHXL_TMS57004
default "lc823450-xgevk" if ARCH_BOARD_LC823450_XGEVK
default "lincoln60" if ARCH_BOARD_LINCOLN60
@@ -2031,6 +2042,9 @@ endif
if ARCH_BOARD_KWIKSTIK_K40
source "configs/kwikstik-k40/Kconfig"
endif
+if ARCH_BOARD_LAUNCHXL_CC1312R1
+source "configs/launchxl-cc1312r1/Kconfig"
+endif
if ARCH_BOARD_LAUNCHXL_TMS57004
source "configs/launchxl-tms57004/Kconfig"
endif
diff --git a/configs/launchxl-cc1312r1/Kconfig b/configs/launchxl-cc1312r1/Kconfig
new file mode 100644
index 0000000000..2f50303de5
--- /dev/null
+++ b/configs/launchxl-cc1312r1/Kconfig
@@ -0,0 +1,8 @@
+#
+# For a description of the syntax of this configuration file,
+# see the file kconfig-language.txt in the NuttX tools repository.
+#
+
+if ARCH_BOARD_LAUNCHXL_CC1312R1
+
+endif # ARCH_BOARD_LAUNCHXL_CC1312R1
diff --git a/configs/launchxl-cc1312r1/README.txt b/configs/launchxl-cc1312r1/README.txt
new file mode 100644
index 0000000000..ea927539cc
--- /dev/null
+++ b/configs/launchxl-cc1312r1/README.txt
@@ -0,0 +1,35 @@
+README
+======
+
+ This directory holds NuttX board support for the TI LAUNCHL-CC1312R1.
+
+Contents
+========
+
+ o Status
+ o Serial Console
+ o LEDs and Buttons
+
+Status
+======
+
+ 2018-12-03: Fragmentary board support in place. The initial intent
+ of this board support is simply to assist in the CC13xx architecture
+ development. Serious board development will occur later.
+
+Serial Console
+==============
+
+ The on-board XDS110 Debugger provide a USB virtual serial console using
+ UART0 (PA0/U0RX and PA1/U0TX).
+
+LEDs and Buttons
+================
+
+LEDs
+----
+
+
+Buttons
+-------
+
diff --git a/configs/launchxl-cc1312r1/include/board.h b/configs/launchxl-cc1312r1/include/board.h
new file mode 100644
index 0000000000..de33fbe485
--- /dev/null
+++ b/configs/launchxl-cc1312r1/include/board.h
@@ -0,0 +1,59 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/include/board.h
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __CONFIG_LAUNCHXL_CC1312R1_INCLUDE_BOARD_H
+#define __CONFIG_LAUNCHXL_CC1312R1_INCLUDE_BOARD_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Clocking *****************************************************************/
+
+/* LED definitions **********************************************************/
+
+/* Button definitions *******************************************************/
+
+/* Pin Disambiguation *******************************************************/
+
+/* DMA **********************************************************************/
+
+#endif /* __CONFIG_NUCLEO_F303ZE_INCLUDE_BOARD_H */
diff --git a/configs/launchxl-cc1312r1/nsh/defconfig b/configs/launchxl-cc1312r1/nsh/defconfig
new file mode 100644
index 0000000000..40c5453f35
--- /dev/null
+++ b/configs/launchxl-cc1312r1/nsh/defconfig
@@ -0,0 +1,43 @@
+# CONFIG_NSH_DISABLE_DATE is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD="launchxl-cc1312r1"
+CONFIG_ARCH_BOARD_LAUNCHXL_CC1312R1=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_CHIP_CC1312R1=y
+CONFIG_ARCH_CHIP_CC13X2=y
+CONFIG_ARCH_CHIP_CC13X2_V1=y
+CONFIG_ARCH_CHIP_SIMPLELINK=y
+CONFIG_ARCH_INTERRUPTSTACK=2048
+CONFIG_ARCH_IRQBUTTONS=y
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_LAZYFPU=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARD_LOOPSPERMSEC=8192
+CONFIG_BUILTIN=y
+CONFIG_DISABLE_POLL=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FS_PROCFS=y
+CONFIG_INTELHEX_BINARY=y
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_READLINE=y
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_PREALLOC_TIMERS=4
+CONFIG_RAM_SIZE=81920
+CONFIG_RAM_START=0x20000000
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_START_DAY=3
+CONFIG_START_MONTH=12
+CONFIG_SYSTEM_NSH=y
+CONFIG_TIVA_UART0=y
+CONFIG_UART0_SERIAL_CONSOLE=y
+CONFIG_USER_ENTRYPOINT="nsh_main"
diff --git a/configs/launchxl-cc1312r1/scripts/Make.defs b/configs/launchxl-cc1312r1/scripts/Make.defs
new file mode 100644
index 0000000000..e6488c37c3
--- /dev/null
+++ b/configs/launchxl-cc1312r1/scripts/Make.defs
@@ -0,0 +1,129 @@
+############################################################################
+# configs/launchxl-cc1312r1/scripts/Make.defs
+#
+# Copyright (C) 2018 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+ifeq ($(CONFIG_BOOT_RUNFROMFLASH),y)
+LDSCRIPT = flash.ld
+else
+LDSCRIPT = sram.ld
+endif
+
+ifeq ($(WINTOOL),y)
+ # Windows-native toolchains
+ DIRLINK = $(TOPDIR)/tools/copydir.sh
+ DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+ MKDEP = $(TOPDIR)/tools/mkwindeps.sh
+ ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+ ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+ ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+ # Linux/Cygwin-native toolchain
+ MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
+ ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+ ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+STRIP = $(CROSSDEV)strip --strip-unneeded
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+ ARCHOPTIMIZATION += $(MAXOPTIMIZATION)
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -fno-strict-aliasing
+ARCHWARNINGSXX = -Wall -Wshadow -Wundef
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+# Loadable module definitions
+
+CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
+
+LDMODULEFLAGS = -r -e module_initialize
+ifeq ($(WINTOOL),y)
+ LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/libs/libc/modlib/gnu-elf.ld}"
+else
+ LDMODULEFLAGS += -T $(TOPDIR)/libs/libc/modlib/gnu-elf.ld
+endif
+
+ASMEXT = .S
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+ LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+ LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
+HOSTLDFLAGS =
+
diff --git a/configs/launchxl-cc1312r1/scripts/flash.ld b/configs/launchxl-cc1312r1/scripts/flash.ld
new file mode 100644
index 0000000000..7e2a533281
--- /dev/null
+++ b/configs/launchxl-cc1312r1/scripts/flash.ld
@@ -0,0 +1,115 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/scripts/flash.ld
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The CC1312R1 has 352Kb of FLASH beginning at address 0x0000:0000 and
+ * 80Kb of SRAM beginning at 0x2000:0000
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 352K
+ sram (rwx) : ORIGIN = 0x20000000, LENGTH = 80K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > flash
+
+ .init_section : {
+ _sinit = ABSOLUTE(.);
+ *(.init_array .init_array.*)
+ _einit = ABSOLUTE(.);
+ } > flash
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } > flash
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } > flash
+ __exidx_end = ABSOLUTE(.);
+
+ _eronly = ABSOLUTE(.);
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram AT > flash
+
+ .bss : {
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/launchxl-cc1312r1/scripts/sram.ld b/configs/launchxl-cc1312r1/scripts/sram.ld
new file mode 100644
index 0000000000..88dec4273d
--- /dev/null
+++ b/configs/launchxl-cc1312r1/scripts/sram.ld
@@ -0,0 +1,115 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/scripts/sram.ld
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The CC1312R1 has 352Kb of FLASH beginning at address 0x0000:0000 and
+ * 80Kb of SRAM beginning at 0x2000:0000
+ */
+
+MEMORY
+{
+ flash (rx) : ORIGIN = 0x00000000, LENGTH = 352K
+ sram (rwx) : ORIGIN = 0x20000000, LENGTH = 80K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+SECTIONS
+{
+ .text : {
+ _stext = ABSOLUTE(.);
+ *(.vectors)
+ *(.text .text.*)
+ *(.fixup)
+ *(.gnu.warning)
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7)
+ *(.glue_7t)
+ *(.got)
+ *(.gcc_except_table)
+ *(.gnu.linkonce.r.*)
+ _etext = ABSOLUTE(.);
+ } > sram
+
+ .init_section : {
+ _sinit = ABSOLUTE(.);
+ *(.init_array .init_array.*)
+ _einit = ABSOLUTE(.);
+ } > sram
+
+ .ARM.extab : {
+ *(.ARM.extab*)
+ } > sram
+
+ __exidx_start = ABSOLUTE(.);
+ .ARM.exidx : {
+ *(.ARM.exidx*)
+ } > sram
+ __exidx_end = ABSOLUTE(.);
+
+ _eronly = ABSOLUTE(.);
+
+ .data : {
+ _sdata = ABSOLUTE(.);
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ CONSTRUCTORS
+ _edata = ABSOLUTE(.);
+ } > sram
+
+ .bss : {
+ _sbss = ABSOLUTE(.);
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ _ebss = ABSOLUTE(.);
+ } > sram
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/configs/launchxl-cc1312r1/src/Makefile b/configs/launchxl-cc1312r1/src/Makefile
new file mode 100644
index 0000000000..24c9b5892b
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/Makefile
@@ -0,0 +1,61 @@
+############################################################################
+# configs/launchxl-cc1312r1/src/Makefile
+#
+# Copyright (C) 2018 Gregory Nutt. All rights reserved.
+# Author: Gregory Nutt
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+# used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+ASRCS =
+CSRCS = cc1312_boot.c
+
+ifeq ($(CONFIG_LIB_BOARDCTL),y)
+CSRCS += cc1312_appinit.c cc1312_bringup.c
+else ifeq ($(CONFIG_BOARD_INITIALIZE),y)
+CSRCS += cc1312_bringup.c
+endif
+
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS += cc1312_autoleds.c
+else
+CSRCS += cc1312_userleds.c
+endif
+
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS += cc1312_buttons.c
+endif
+
+ifeq ($(CONFIG_TIVA_SSI),y)
+CSRCS += cc1312_ssi.c
+endif
+
+include $(TOPDIR)/configs/Board.mk
diff --git a/configs/launchxl-cc1312r1/src/cc1312_appinit.c b/configs/launchxl-cc1312r1/src/cc1312_appinit.c
new file mode 100644
index 0000000000..f6ea3f62ae
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/cc1312_appinit.c
@@ -0,0 +1,90 @@
+/****************************************************************************
+ * config/launchxl-cc1312r1/src/cc1312_appinit.c
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+
+#include
+
+#include "launchxl-cc1312r1.h"
+
+#ifdef CONFIG_LIB_BOARDCTL
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ * Perform application specific initialization. This function is never
+ * called directly from application code, but only indirectly via the
+ * (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ * arg - The boardctl() argument is passed to the board_app_initialize()
+ * implementation without modification. The argument has no
+ * meaning to NuttX; the meaning of the argument is a contract
+ * between the board-specific initalization logic and the
+ * matching application logic. The value cold be such things as a
+ * mode enumeration value, a set of DIP switch switch settings, a
+ * pointer to configuration data read from a file or serial FLASH,
+ * or whatever you would like to do with it. Every implementation
+ * should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ * Zero (OK) is returned on success; a negated errno value is returned on
+ * any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+int board_app_initialize(uintptr_t arg)
+{
+#ifndef CONFIG_BOARD_INITIALIZE
+ /* Perform board initialization */
+
+ return cc1312_bringup();
+#else
+ return OK;
+#endif
+}
+
+#endif /* CONFIG_LIB_BOARDCTL */
diff --git a/configs/launchxl-cc1312r1/src/cc1312_autoleds.c b/configs/launchxl-cc1312r1/src/cc1312_autoleds.c
new file mode 100644
index 0000000000..26f19bbefb
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/cc1312_autoleds.c
@@ -0,0 +1,86 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/src/cc1312_autoleds.c
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+
+#include "tiva_gpio.h"
+#include "launchxl-cc1312r1.h"
+
+#include
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ ****************************************************************************/
+
+void board_autoled_initialize(void)
+{
+#warning Missing logic
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+#warning Missing logic
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+#warning Missing logic
+}
+
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/configs/launchxl-cc1312r1/src/cc1312_boot.c b/configs/launchxl-cc1312r1/src/cc1312_boot.c
new file mode 100644
index 0000000000..9ea1cb06be
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/cc1312_boot.c
@@ -0,0 +1,106 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/src/cc1312_boot.c
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "tiva_start.h"
+#include "launchxl-cc1312r1.h"
+
+#include
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: tiva_boardinitialize
+ *
+ * Description:
+ * All Tiva architectures must provide the following entry point. This
+ * entry point is called early in the initialization -- after clocking and
+ * memory have been configured but before caches have been enabled and
+ * before any devices have been initialized.
+ *
+ ****************************************************************************/
+
+void tiva_boardinitialize(void)
+{
+#ifdef CONFIG_TIVA_SSI
+ /* Configure SSI chip select pins */
+
+ cc1312_ssidev_initialize();
+#endif
+
+#ifdef CONFIG_ARCH_LEDS
+ /* Configure on-board LEDs if LED support has been selected. */
+
+ board_autoled_initialize();
+#endif
+}
+
+/****************************************************************************
+ * Name: board_initialize
+ *
+ * Description:
+ * If CONFIG_BOARD_INITIALIZE is selected, then an additional
+ * initialization call will be performed in the boot-up sequence to a
+ * function called board_initialize(). board_initialize() will be
+ * called immediately after up_intitialize() is called and just before the
+ * initial application is started. This additional initialization phase
+ * may be used, for example, to initialize board-specific device drivers.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_BOARD_INITIALIZE
+void board_initialize(void)
+{
+ /* Perform board initialization */
+
+ (void)cc1312_bringup();
+}
+#endif /* CONFIG_BOARD_INITIALIZE */
diff --git a/configs/launchxl-cc1312r1/src/cc1312_bringup.c b/configs/launchxl-cc1312r1/src/cc1312_bringup.c
new file mode 100644
index 0000000000..c5f727fdba
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/cc1312_bringup.c
@@ -0,0 +1,95 @@
+/****************************************************************************
+ * config/launchxl-cc1312r1/src/cc1312_bringup.c
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include "launchxl-cc1312r1.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: cc1312_bringup
+ *
+ * Description:
+ * Bring up board features.
+ *
+ * If CONFIG_BOARD_INITIALIZE=y, then this function will be called from
+ * board_initialize().
+ *
+ * If CONFIG_BOARD_INITIALIZE is not selected, but CONFIG_LIB_BOARDCTL=y
+ * then this function will *probably* be called from application logic via
+ * boardctl().
+ *
+ * Otherwise, this function will not be called (which is usually a bad
+ * thing)
+ *
+ ****************************************************************************/
+
+int cc1312_bringup(void)
+{
+ int ret;
+
+#ifdef CONFIG_FS_PROCFS
+ /* Mount the procfs file system */
+
+ ret = mount(NULL, "/proc", "procfs", 0, NULL);
+ if (ret < 0)
+ {
+ syslog(LOG_ERR, "ERROR: Failed to mount procfs at /proc: %d\n", ret);
+ }
+#endif
+
+ /* If we got here then perhaps not all initialization was successful, but
+ * at least enough succeeded to bring-up NSH with perhaps reduced
+ * capabilities.
+ */
+
+ UNUSED(ret);
+ return OK;
+}
diff --git a/configs/launchxl-cc1312r1/src/cc1312_buttons.c b/configs/launchxl-cc1312r1/src/cc1312_buttons.c
new file mode 100644
index 0000000000..daa75b8b70
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/cc1312_buttons.c
@@ -0,0 +1,151 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/src/cc1312_buttons.c
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+
+#include
+#include
+#include
+
+#include
+
+#include "tiva_gpio.h"
+#include "launchxl-cc1312r1.h"
+
+#include
+
+#ifdef CONFIG_ARCH_BUTTONS
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_button_initialize
+ *
+ * Description:
+ * board_button_initialize() must be called to initialize button resources.
+ * After that, board_buttons() may be called to collect the current state
+ * of all buttons or board_button_irq() may be called to register button
+ * interrupt handlers.
+ *
+ ****************************************************************************/
+
+void board_button_initialize(void)
+{
+#warning Missing logic
+}
+
+/****************************************************************************
+ * Name: board_buttons
+ *
+ * Description:
+ * After board_button_initialize() has been called, board_buttons() may be
+ * called to collect the state of all buttons. board_buttons() returns an
+ * 32-bit bit set with each bit associated with a button. See the BUTTON*
+ * definitions above for the meaning of each bit in the returned value.
+ *
+ ****************************************************************************/
+
+uint32_t board_buttons(void)
+{
+#warning Missing logic
+}
+
+/****************************************************************************
+ * Name: board_button_irq
+ *
+ * Description:
+ * This function may be called to register an interrupt handler that will
+ * be called when a button is depressed or released. The ID value is one
+ * of the BUTTON* definitions provided above.
+ *
+ * Configuration Notes:
+ * Configuration CONFIG_SAMA5_PIO_IRQ must be selected to enable the
+ * overall PIO IRQ feature and CONFIG_SAMA5_PIOB_IRQ must be enabled to
+ * select PIOs to support interrupts on PIOE.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_TIVA_GPIOP_IRQS)
+int board_button_irq(int id, xcpt_t irqhandler, FAR void *arg)
+{
+#if 0
+ irqstate_t flags;
+ int ret = -EINVAL;
+
+ /* Interrupts are supported only on ports P and Q and, hence, only on button SW4 */
+
+ if (id == BUTTON_SW4)
+ {
+ /* The following should be atomic */
+
+ flags = enter_critical_section();
+
+ /* Detach and disable the button interrupt */
+
+ up_disable_irq(IRQ_SW4);
+ irq_detach(IRQ_SW4);
+
+ /* Attach the new handler if so requested */
+
+ if (irqhandler != NULL)
+ {
+ ret = irq_attach(IRQ_SW4, irqhandler, arg);
+ if (ret == OK)
+ {
+ up_enable_irq(IRQ_SW4);
+ }
+ }
+
+ leave_critical_section(flags);
+ }
+
+ return ret;
+#else
+#warning Missing logic
+ return -ENOSYS;
+#endif
+}
+#endif
+
+#endif /* CONFIG_ARCH_BUTTONS */
diff --git a/configs/launchxl-cc1312r1/src/cc1312_ssi.c b/configs/launchxl-cc1312r1/src/cc1312_ssi.c
new file mode 100644
index 0000000000..a98b8f41cc
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/cc1312_ssi.c
@@ -0,0 +1,117 @@
+/************************************************************************************
+ * configs/launchxl-cc1312r1/src/cc1312_ssi.c
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+#include
+
+#include "up_arch.h"
+#include "chip.h"
+#include "tiva_gpio.h"
+
+#include "launchxl-cc1312r1.h"
+
+#ifdef CONFIG_TIVA_SSI
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file */
+
+#ifdef CONFIG_DEBUG_SPI
+# define ssi_dumpgpio(m) tiva_dumpgpio(SDCCS_GPIO, m)
+#else
+# define ssi_dumpgpio(m)
+#endif
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: cc1312_ssidev_initialize
+ *
+ * Description:
+ * Called to configure SPI chip select GPIO pins for the DK-TM4C129X.
+ *
+ ************************************************************************************/
+
+void cc1312_ssidev_initialize(void)
+{
+}
+
+/****************************************************************************
+ * The external functions, tiva_ssiselect and tiva_ssistatus must be provided
+ * by board-specific logic. The are implementations of the select and status
+ * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
+ * All othermethods (including tiva_ssibus_initialize()) are provided by common
+ * logic. To use this common SPI logic on your board:
+ *
+ * 1. Provide tiva_ssiselect() and tiva_ssistatus() functions in your
+ * board-specific logic. This function will perform chip selection and
+ * status operations using GPIOs in the way your board is configured.
+ * 2. Add a call to tiva_ssibus_initialize() in your low level initialization
+ * logic
+ * 3. The handle returned by tiva_ssibus_initialize() may then be used to
+ * bind the SPI driver to higher level logic (e.g., calling
+ * mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ * the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+void tiva_ssiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
+{
+ spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+ ssi_dumpgpio("tiva_ssiselect() Entry");
+ ssi_dumpgpio("tiva_ssiselect() Exit");
+}
+
+uint8_t tiva_ssistatus(FAR struct spi_dev_s *dev, uint32_t devid)
+{
+ spiinfo("Returning SPI_STATUS_PRESENT\n");
+ return SPI_STATUS_PRESENT;
+}
+
+#endif /* CONFIG_TIVA_SSI */
diff --git a/configs/launchxl-cc1312r1/src/cc1312_userleds.c b/configs/launchxl-cc1312r1/src/cc1312_userleds.c
new file mode 100644
index 0000000000..93317615ef
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/cc1312_userleds.c
@@ -0,0 +1,80 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/src/cc1312_userleds.c
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+#include
+#include
+#include
+
+#include
+
+#include "tiva_gpio.h"
+#include "launchxl-cc1312r1.h"
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_userled_initialize
+ ****************************************************************************/
+
+void board_userled_initialize(void)
+{
+#warning Missing logic
+}
+
+/****************************************************************************
+ * Name: board_userled
+ ****************************************************************************/
+
+void board_userled(int led, bool ledon)
+{
+#warning Missing logic
+}
+
+/****************************************************************************
+ * Name: board_userled_all
+ ****************************************************************************/
+
+void board_userled_all(uint8_t ledset)
+{
+#warning Missing logic
+}
diff --git a/configs/launchxl-cc1312r1/src/launchxl-cc1312r1.h b/configs/launchxl-cc1312r1/src/launchxl-cc1312r1.h
new file mode 100644
index 0000000000..4f713b6983
--- /dev/null
+++ b/configs/launchxl-cc1312r1/src/launchxl-cc1312r1.h
@@ -0,0 +1,85 @@
+/****************************************************************************
+ * configs/launchxl-cc1312r1/src/launchxl-cc1312r1.h
+ *
+ * Copyright (C) 2018 Gregory Nutt. All rights reserved.
+ * Author: Gregory Nutt
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ * used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __CONFIG_LAUNCHXL_CC1312R1_SRC_LAUNCHXL_CC1312R1_H
+#define __CONFIG_LAUNCHXL_CC1312R1_SRC_LAUNCHXL_CC1312R1_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Function Prototypes
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: cc1312_bringup
+ *
+ * Description:
+ * Bring up board features.
+ *
+ * If CONFIG_BOARD_INITIALIZE=y, then this function will be called from
+ * board_initialize().
+ *
+ * If CONFIG_BOARD_INITIALIZE is not selected, but CONFIG_LIB_BOARDCTL=y
+ * then this function will *probably* be called from application logic via
+ * boardctl().
+ *
+ * Otherwise, this function will not be called (which is usually a bad
+ * thing)
+ *
+ ****************************************************************************/
+
+int cc1312_bringup(void);
+
+/************************************************************************************
+ * Name: cc1312_ssidev_initialize
+ *
+ * Description:
+ * Called to configure SSI chip select GPIO pins for the LAUNCHXL-CC1312R1 board.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_TIVA_SSI
+void cc1312_ssidev_initialize(void);
+#endif
+
+#endif /* __CONFIG_NUCLEO_F303ZE_INCLUDE_BOARD_H */
diff --git a/configs/max32660-evsys/include/board.h b/configs/max32660-evsys/include/board.h
index 60c3c88501..41dd87c90e 100644
--- a/configs/max32660-evsys/include/board.h
+++ b/configs/max32660-evsys/include/board.h
@@ -92,16 +92,16 @@
* 2Hz, then a fatal error has been detected and the system has halted.
*/
-/* Button definitions ***************************************************************/
+/* Button definitions *******************************************************/
/* Buttons
*
- * An single button, SW2, is available on GPIO P0.12 for use by software. A low
- * value will be sensed when the button is pressed.
+ * An single button, SW2, is available on GPIO P0.12 for use by software. A
+ * low value will be sensed when the button is pressed.
*
* NOTE: There are no pull-up resistors connected to the generic user buttons
- * so it is necessary to enable the internal pull-up in the SAM E70 to use the
- * button.
+ * so it is necessary to enable the internal pull-up in the SAM E70 to use
+ * the button.
*/
#define BUTTON_SW2 0