sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update README

Browse Source
This commit is contained in:
Gregory Nutt 2015-03-01 10:52:44 -06:00
parent dd288446e5
commit a68f1558f5
1 changed files with 14 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
configs/pic32mz-starterkit/README.txt
View File

@ -32,8 +32,10 @@ Port Status
3) However, I am still unable to write code to FLASH using MPLABX IDE. It
give me uninterpretable error messages, for example, saying that it could
ot write to FLASH location 0x1fc00480 "Expected 0xffffffff, found
0xffffffff). ???
not write to FLASH:
Address: 1fc00480 Expected Value: ffffffff Received Value: ffffffff
Failed to program device
This could very well be some issue with my formatting of the nuttx.hex
file, but I have no understanding of what the solution might be.
@ -279,9 +281,18 @@ Where <subdir> is one of the following:
2. Serial Output
The OS test produces all of its test output on the serial console.
This configuration has UART1 enabled as a serial console.
This configuration has UART1 enabled as a serial console. This
can easily be changed by reconfiguring with 'make menuconfig'.
3. Toolchain
By default, the Pinguino MIPs tool chain is used. This toolchain
selection can easily be changed with 'make menuconfig'.
4. Default configuration: These are other things that you may want to
change in the configuration:
CONFIG_ARCH_CHIP_PIC32MZ2048ECM=y : Assumes part with Crypto Engine
CONFIG_PIC32MZ_DEBUGGER_ENABLE=n : Debugger is disabled
CONFIG_PIC32MZ_TRACE_ENABLE=n : Trace is disabled
CONFIG_PIC32MZ_JTAG_ENABLE=n : JTAG is disabled